Patchset3 (11.1.1.4/wls 10.3.4) Remote debugging JDPA in weblogic cluster
Hi,
I am using Patchset3 (JDeveloper 11.1.1.4/ weblogic server 10.3.4). I was wondering how i can remote debug with
a) weblogic managed server that is part of a weblogic cluster
b) the cluster itself that contains multiple managed servers.
Note that i do understand how to remote debug against a weblogic server (e.g. http://jdeveloperfaq.blogspot.com/2009/12/faq-4-how-to-remote-debug-adf.html), but have not been able to find out how i can achieve this against a cluster that has multiple managed servers. Any directions will be appreciated.
Thanks,
Hi,
haven't tried it but here are some suggestions that might be of help:
1) Each managed server for each cluster node should be setup for remote debugging. This means that each managed server must be started with the -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n* options in the WebLogic start-up script. Also Tunneling must be enabled for each managed server for each cluster node.
2) Make sure that you specify a different connection port for each managed server. This is indicated by the address* specifier above.
3) It seems logical to me that you will need to start separate instances of JDeveloper - one for each managed server that you need to attach to.
Let us know how it turns out,
Nick
Similar Messages
-
Does WLS 6.1 optimise remote calls?
Does WLS 6.1 optimise remote calls (remote method invocations) for EJBs that are
collocated on the same instance/same JNDI tree?
I've got a set of EJBs that I'd like to keep 'location independent' so I dont
want to use local interfaces. Will WLS do some magic under the covers to avoid
a remote network invocation (back to 127.0.0.1) when the EJBs are deployed together
in the same instance? Do I need to switch this feature on or is it done automatically?
Any help would be much appreciated.
Rich"RajV" <[email protected]> wrote in message
news:[email protected]..
>
Hi Imeshev:
Is there any document on BEA's site that talks about the optimization?http://e-docs.bea.com/wls/docs70/ejb/reference.html#1070257
Regards,
Slava Imeshev
"Slava Imeshev" <[email protected]> wrote:
"Rich" <[email protected]> wrote in message
news:3e0742fd$[email protected]..
Does WLS 6.1 optimise remote calls (remote method invocations) forEJBs
that are
collocated on the same instance/same JNDI tree?
I've got a set of EJBs that I'd like to keep 'location independent'so I
dont
want to use local interfaces. Will WLS do some magic under the coversto
avoid
a remote network invocation (back to 127.0.0.1) when the EJBs are
deployed
together
in the same instance? Do I need to switch this feature on or is itdone
automatically?
weblogic performs local calls automatically for EJBs and their clients
residing in the same application (ejbjar or ear), or, to be more precise,
loaded by the same classloader.
Regards,
Slava Imeshev -
Remote Debugging WLS v. 8.1/ Windows: How to set JAVA_OPTIONS?
How does one set JAVA_OPTIONS with no "startWebLogic.bat" supplied with WLS v. 8.1, for remote debugging?
(Note: Prefer to not have to run in unix emulation.)
WebLogic 8.1 has the startWebLogic script file in user_projects/domains/<WLS_Domain>
directory. <WLS_Domain> is the WebLogic Server Domain directory.
Marvin Toll <[email protected]> wrote:
>How does one set JAVA_OPTIONS with no "startWebLogic.bat" supplied with
>WLS v. 8.1, for remote debugging?
>
>(Note: Prefer to not have to run in unix emulation.)
-
I'm having a problem trying to debug a WLS application. Using intellij to attach
to the WLS 7 instance it takes an infinitely long time to remote process.
i had a similar problem in v6 that was solved by changing the VM from hotspot to
classic.
Any help
SimonWebLogic 8.1 has the startWebLogic script file in user_projects/domains/<WLS_Domain>
directory. <WLS_Domain> is the WebLogic Server Domain directory.
Marvin Toll <[email protected]> wrote:
>How does one set JAVA_OPTIONS with no "startWebLogic.bat" supplied with
>WLS v. 8.1, for remote debugging?
>
>(Note: Prefer to not have to run in unix emulation.)
-
Has anyone set up a script (Windows) to run WLS in debug mode (-Xdebug)
according to the JPDA spec using JDK1.2.2? I want to step into EJB from
JBuilder.
Thanks, JonHi.
I modified one of our standard start scripts for WL 4.5.1 to do this. The
server does start with this script, but I haven't used it to step into an
EJB from an IDE.
Hope this helps,
Michael Young
BEA Systems
levyjj wrote:
Has anyone set up a script (Windows) to run WLS in debug mode (-Xdebug)
according to the JPDA spec using JDK1.2.2? I want to step into EJB from
JBuilder.
Thanks, Jon[startdebug12.cmd] -
Error retrieving JDBC connection from remote client (WLS 10.0)
Hallo,
I get an error when I try to retrieve a JDBC connection from a WLS datasource using a remote client. My Weblogic server version is: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184
I use the following code to retrieve the JDBC connection:
Hashtable<String,String> ctxEnv = null;
InitialContext ctx = null;
DataSource dataSource = null;
Connection con = null;
ctxEnv = new Hashtable<String,String>();
ctxEnv.put(InitialContext.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
ctxEnv.put(InitialContext.PROVIDER_URL, "t3://localhost:7001");
ctx = new InitialContext(ctxEnv);
dataSource = (DataSource) ctx.lookup("datasources/XXX");
con = dataSource.getConnection();
When I execute this code with the weblogic.jar in the classpath everything works fine. However, when I put the wlfullclient.jar in the classpath which I created using the JAR Builder Tool I get the follwoing error:
weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception
at weblogic.jdbc.common.internal.RmiDataSource_1001_WLStub.getConnection(Unknown Source)
at net.schufa.enterprise.utilities.database.test.JDBCSupportTest.test_getConnection_manually(JDBCSupportTest.java:34)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
weblogic.utils.NestedException: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:221)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:338)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
... 17 more
Caused by: weblogic.utils.NestedException: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
at weblogic.rjvm.RJVMImpl.gotExceptionReceiving(RJVMImpl.java:938)
at weblogic.rjvm.ConnectionManager.gotExceptionReceiving(ConnectionManager.java:1009)
at weblogic.rjvm.MsgAbbrevJVMConnection.gotExceptionReceiving(MsgAbbrevJVMConnection.java:452)
at weblogic.rjvm.t3.MuxableSocketT3.hasException(MuxableSocketT3.java:373)
at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:755)
at weblogic.socket.SocketMuxer.deliverHasException(SocketMuxer.java:708)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:307)
at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
at weblogic.work.ExecuteRequestAdapter.execute(ExecuteRequestAdapter.java:21)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
Caused by: java.lang.NoClassDefFoundError: weblogic/diagnostics/instrumentation/InstrumentationDebug
at weblogic.diagnostics.instrumentation.rtsupport.InstrumentationSupportImpl.getMonitor(InstrumentationSupportImpl.java:54)
at weblogic.diagnostics.instrumentation.InstrumentationSupport.getMonitor(InstrumentationSupport.java:201)
at weblogic.jdbc.rmi.SerialConnection.<clinit>(SerialConnection.java)
at sun.misc.Unsafe.ensureClassInitialized(Native Method)
at sun.reflect.UnsafeFieldAccessorFactory.newFieldAccessor(UnsafeFieldAccessorFactory.java:25)
at sun.reflect.ReflectionFactory.newFieldAccessor(ReflectionFactory.java:122)
at java.lang.reflect.Field.acquireFieldAccessor(Field.java:917)
at java.lang.reflect.Field.getFieldAccessor(Field.java:898)
at java.lang.reflect.Field.getLong(Field.java:527)
at java.io.ObjectStreamClass.getDeclaredSUID(ObjectStreamClass.java:1586)
at java.io.ObjectStreamClass.access$700(ObjectStreamClass.java:52)
at java.io.ObjectStreamClass$2.run(ObjectStreamClass.java:408)
at java.security.AccessController.doPrivileged(Native Method)
at java.io.ObjectStreamClass.<init>(ObjectStreamClass.java:400)
at java.io.ObjectStreamClass.lookup(ObjectStreamClass.java:297)
at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:531)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1552)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1466)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1292)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.rjvm.ClassTableEntry.readExternal(ClassTableEntry.java:36)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1755)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1717)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1305)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:348)
at weblogic.rjvm.InboundMsgAbbrev.readObject(InboundMsgAbbrev.java:65)
at weblogic.rjvm.InboundMsgAbbrev.read(InboundMsgAbbrev.java:37)
at weblogic.rjvm.MsgAbbrevJVMConnection.readMsgAbbrevs(MsgAbbrevJVMConnection.java:223)
at weblogic.rjvm.MsgAbbrevInputStream.init(MsgAbbrevInputStream.java:174)
at weblogic.rjvm.MsgAbbrevJVMConnection.dispatch(MsgAbbrevJVMConnection.java:435)
at weblogic.rjvm.t3.MuxableSocketT3.dispatch(MuxableSocketT3.java:368)
at weblogic.socket.AbstractMuxableSocket.dispatch(AbstractMuxableSocket.java:383)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:872)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:808)
at weblogic.socket.JavaSocketMuxer.processSockets(JavaSocketMuxer.java:283)
... 4 more
Can please anyone tell me what's going on there? What really astonishes me is that the class mentioned in the stacktrace is neither present in the wlfullclient.jar nor in the weblogic.jar, but using the weblogic.jar everything works fine. Any hint would be appreciated so much ...
Here is the log written when is created the wlfullclient.jar:
C:\Programme\bea\weblogic10.0\server\lib>java -jar ../../../modules/com.bea.core.jarbuilder_1.0.1.0.jar
Setting Manifest:Class-Path = schema/weblogic-container-binding.jar schema/weblogic-domain-binding.jar schema/diagnostic
s-binding.jar schema/diagnostics-image-binding.jar schema/kodo-conf-binding.jar wlcipher.jar xmlx.jar ojdbc14.jar jconn2
.jar jConnect.jar EccpressoAsn1.jar EccpressoCore.jar EccpressoJcae.jar mysql-connector-java-commercial-5.0.3-bin.jar w
lbase.jar wlutil.jar wlsqlserver.jar wldb2.jar wlsybase.jar wloracle.jar wlinformix.jar wlw-langx.jar ../../common/lib/p
dev.jar debugging.jar wlw-system.jar ../../javelin/lib/javelinx.jar jcom.jar weblogic-L10N.jar
Setting Manifest:Implementation-Vendor = BEA Systems
Setting Manifest:Implementation-Title = Client jar for WebLogic Server 10.0 Thu Oct 18 20:17:44 EDT 2007 1005184
Setting Manifest:Implementation-Version = 10.0.1.0
Creating new jar file: wlfullclient.jar
Integrating jar -->(0)/(0)/C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(0)/(31337)/(31337)/C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar -->(0)/(31337)/C:\Programme\bea\modules\features\weblogic.client.modules_10.0.1.0.jar
Integrating jar <--(0)/(31337)/(0)/C:\Programme\bea\modules\features\weblogic.client.modules_10.0.1.0.jar
Integrating jar -->(1)/(31337)/C:\Programme\bea\modules\features\weblogic.client.modules.L10N_10.0.1.0.jar
Integrating jar <--(1)/(31337)/(0)/C:\Programme\bea\modules\features\weblogic.client.modules.L10N_10.0.1.0.jar
Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.ja_10.0.1.0.jar
Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.ko_10.0.1.0.jar
Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.zh.CN_10.0.1.0.jar
Ignoring unresolved jarC:\Programme\bea\modules\features\weblogic.client.modules.zh.TW_10.0.1.0.jar
Integrating jar -->(1)/(31337)/C:\Programme\bea\modules\com.bea.core.antlr.runtime_2.7.5.jar
Integrating jar <--(1)/(31410)/(73)/C:\Programme\bea\modules\com.bea.core.antlr.runtime_2.7.5.jar
Integrating jar -->(1)/(31410)/C:\Programme\bea\modules\com.bea.core.logging_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(31487)/(77)/C:\Programme\bea\modules\com.bea.core.logging_1.0.1.0.jar
Integrating jar -->(1)/(31487)/C:\Programme\bea\modules\com.bea.core.xml.staxb.runtime_1.0.1.0.jar
Integrating jar <--(1)/(32047)/(560)/C:\Programme\bea\modules\com.bea.core.xml.staxb.runtime_1.0.1.0.jar
Integrating jar -->(1)/(32047)/C:\Programme\bea\modules\com.bea.core.annogen_1.0.1.0.jar
Integrating jar <--(1)/(32265)/(218)/C:\Programme\bea\modules\com.bea.core.annogen_1.0.1.0.jar
Integrating jar -->(1)/(32265)/C:\Programme\bea\modules\com.bea.core.process_5.3.0.0.jar
Integrating jar <--(1)/(32277)/(12)/C:\Programme\bea\modules\com.bea.core.process_5.3.0.0.jar
Integrating jar -->(1)/(32277)/C:\Programme\bea\modules\com.bea.core.common.engine.impl_2.0.1.0.jar
Integrating jar <--(1)/(32294)/(17)/C:\Programme\bea\modules\com.bea.core.common.engine.impl_2.0.1.0.jar
Integrating jar -->(1)/(32294)/C:\Programme\bea\modules\com.bea.core.common.engine.api_2.0.1.0.jar
Integrating jar <--(1)/(32321)/(27)/C:\Programme\bea\modules\com.bea.core.common.engine.api_2.0.1.0.jar
Integrating jar -->(1)/(32321)/C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
Integrating jar <--(1)/(32446)/(125)/C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
Integrating jar -->(1)/(32446)/C:\Programme\bea\modules\com.bea.core.common.security.impl_2.0.1.0.jar
Integrating jar <--(1)/(32895)/(449)/C:\Programme\bea\modules\com.bea.core.common.security.impl_2.0.1.0.jar
Integrating jar -->(1)/(32895)/C:\Programme\bea\modules\com.bea.core.common.security.jdkutils_2.0.1.0.jar
Integrating jar <--(1)/(32908)/(13)/C:\Programme\bea\modules\com.bea.core.common.security.jdkutils_2.0.1.0.jar
Integrating jar -->(1)/(32908)/C:\Programme\bea\modules\com.bea.core.common.security.utils_2.0.1.0.jar
Integrating jar <--(1)/(32963)/(55)/C:\Programme\bea\modules\com.bea.core.common.security.utils_2.0.1.0.jar
Integrating jar -->(1)/(32963)/C:\Programme\bea\modules\com.bea.core.common.security.providers.utils_2.0.1.0.jar
Ignoring Duplicate Entry com/bea/common/security/ProvidersLogger$LoggableMessageSpiImpl.class also in C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
Ignoring Duplicate Entry com/bea/common/security/ProvidersLogger.class also in C:\Programme\bea\modules\com.bea.core.common.security.api_2.0.1.0.jar
Integrating jar <--(1)/(33817)/(854)/C:\Programme\bea\modules\com.bea.core.common.security.providers.utils_2.0.1.0.jar
Integrating jar -->(1)/(33817)/C:\Programme\bea\modules\com.bea.core.common.security.providers.env_2.0.1.0.jar
Integrating jar <--(1)/(33901)/(84)/C:\Programme\bea\modules\com.bea.core.common.security.providers.env_2.0.1.0.jar
Integrating jar -->(1)/(33901)/C:\Programme\bea\modules\javax.activation_1.1.jar
Integrating jar <--(1)/(33945)/(44)/C:\Programme\bea\modules\javax.activation_1.1.jar
Integrating jar -->(1)/(33945)/C:\Programme\bea\modules\javax.annotation_1.0.jar
Integrating jar <--(1)/(33958)/(13)/C:\Programme\bea\modules\javax.annotation_1.0.jar
Integrating jar -->(1)/(33958)/C:\Programme\bea\modules\javax.interceptor_1.0.jar
Integrating jar <--(1)/(33964)/(6)/C:\Programme\bea\modules\javax.interceptor_1.0.jar
Integrating jar -->(1)/(33964)/C:\Programme\bea\modules\javax.ejb_3.0.jar
Integrating jar <--(1)/(34022)/(58)/C:\Programme\bea\modules\javax.ejb_3.0.jar
Integrating jar -->(1)/(34022)/C:\Programme\bea\modules\javax.jdo_2.0.jar
Integrating jar <--(1)/(34119)/(97)/C:\Programme\bea\modules\javax.jdo_2.0.jar
Integrating jar -->(1)/(34119)/C:\Programme\bea\modules\javax.enterprise.deploy_1.2.jar
Integrating jar <--(1)/(34162)/(43)/C:\Programme\bea\modules\javax.enterprise.deploy_1.2.jar
Integrating jar -->(1)/(34162)/C:\Programme\bea\modules\javax.jms_1.1.jar
Integrating jar <--(1)/(34221)/(59)/C:\Programme\bea\modules\javax.jms_1.1.jar
Integrating jar -->(1)/(34221)/C:\Programme\bea\modules\javax.jsp_1.0.1.0_2-1.jar
Integrating jar <--(1)/(34319)/(98)/C:\Programme\bea\modules\javax.jsp_1.0.1.0_2-1.jar
Integrating jar -->(1)/(34319)/C:\Programme\bea\modules\javax.jws_2.0.jar
Integrating jar <--(1)/(34335)/(16)/C:\Programme\bea\modules\javax.jws_2.0.jar
Integrating jar -->(1)/(34335)/C:\Programme\bea\modules\javax.mail_1.4.0.2.jar
Integrating jar <--(1)/(34602)/(267)/C:\Programme\bea\modules\javax.mail_1.4.0.2.jar
Integrating jar -->(1)/(34602)/C:\Programme\bea\modules\javax.management.j2ee_1.0.jar
Integrating jar <--(1)/(34637)/(35)/C:\Programme\bea\modules\javax.management.j2ee_1.0.jar
Integrating jar -->(1)/(34637)/C:\Programme\bea\modules\javax.persistence_1.0.1.0_1-0.jar
Integrating jar <--(1)/(34730)/(93)/C:\Programme\bea\modules\javax.persistence_1.0.1.0_1-0.jar
Integrating jar -->(1)/(34730)/C:\Programme\bea\modules\javax.resource_1.5.jar
Integrating jar <--(1)/(34799)/(69)/C:\Programme\bea\modules\javax.resource_1.5.jar
Integrating jar -->(1)/(34799)/C:\Programme\bea\modules\javax.servlet_1.0.1.0_2-5.jar
Integrating jar <--(1)/(34869)/(70)/C:\Programme\bea\modules\javax.servlet_1.0.1.0_2-5.jar
Integrating jar -->(1)/(34869)/C:\Programme\bea\modules\javax.transaction_1.1.jar
Integrating jar <--(1)/(34889)/(20)/C:\Programme\bea\modules\javax.transaction_1.1.jar
Integrating jar -->(1)/(34889)/C:\Programme\bea\modules\javax.xml.bind_2.0.jar
Integrating jar <--(1)/(34989)/(100)/C:\Programme\bea\modules\javax.xml.bind_2.0.jar
Integrating jar -->(1)/(34989)/C:\Programme\bea\modules\javax.xml.soap_1.3.0.0.jar
Integrating jar <--(1)/(35019)/(30)/C:\Programme\bea\modules\javax.xml.soap_1.3.0.0.jar
Ignoring unresolved jarC:\Programme\bea\modules\jaxp-api.jar
Ignoring unresolved jarC:\Programme\bea\modules\jax-qname.jar
Ignoring unresolved jarC:\Programme\bea\modules\activation.jar
Ignoring unresolved jarC:\Programme\bea\modules\servlet.jar
Integrating jar -->(1)/(35019)/C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
Integrating jar <--(1)/(35063)/(44)/C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
Integrating jar -->(1)/(35063)/C:\Programme\bea\modules\javax.xml.ws_2.0.jar
Integrating jar <--(1)/(35110)/(47)/C:\Programme\bea\modules\javax.xml.ws_2.0.jar
Integrating jar -->(1)/(35110)/C:\Programme\bea\modules\javax.xml.rpc_1.1.jar
Ignoring Duplicate Entry javax/xml/namespace/QName.class also in C:\Programme\bea\modules\javax.xml.stream_1.0.1.0_1-0.jar
Integrating jar <--(1)/(35167)/(57)/C:\Programme\bea\modules\javax.xml.rpc_1.1.jar
Integrating jar -->(1)/(35167)/C:\Programme\bea\modules\com.bea.core.jsafe_3.5.0.jar
Integrating jar <--(1)/(35423)/(256)/C:\Programme\bea\modules\com.bea.core.jsafe_3.5.0.jar
Integrating jar -->(1)/(35423)/C:\Programme\bea\modules\com.bea.core.apache_1.0.1.0.jar
Integrating jar <--(1)/(36825)/(1402)/C:\Programme\bea\modules\com.bea.core.apache_1.0.1.0.jar
Integrating jar -->(1)/(36825)/C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
Integrating jar <--(1)/(36964)/(139)/C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
Integrating jar -->(1)/(36964)/C:\Programme\bea\modules\com.bea.core.beaninfo_1.0.1.0.jar
Integrating jar <--(1)/(36976)/(12)/C:\Programme\bea\modules\com.bea.core.beaninfo_1.0.1.0.jar
Integrating jar -->(1)/(36976)/C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
Ignoring Duplicate Entry utils/Schema.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry utils/dbping.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCConnectionPoolParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDataSourceBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDataSourceParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCDriverParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCPropertiesBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCPropertyBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/j2ee/descriptor/wl/JDBCXAParamsBean.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(37133)/(157)/C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
Integrating jar -->(1)/(37133)/C:\Programme\bea\modules\com.bea.core.descriptor_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/descriptor/SettableBean.class also in C:\Programme\bea\modules\com.bea.core.datasource_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/descriptor/beangen/LegalChecks.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/descriptor/beangen/StringHelper.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/descriptor/beangen/XMLHelper.class also in C:\Programme\bea\modules\com.bea.core.beangen_1.0.1.0.jar
Integrating jar <--(1)/(37226)/(93)/C:\Programme\bea\modules\com.bea.core.descriptor_1.0.1.0.jar
Integrating jar -->(1)/(37226)/C:\Programme\bea\modules\com.bea.core.diagnostics.core_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/diagnostics/type/UnexpectedExceptionHandler.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(37264)/(38)/C:\Programme\bea\modules\com.bea.core.diagnostics.core_1.0.1.0.jar
Integrating jar -->(1)/(37264)/C:\Programme\bea\modules\com.bea.core.i18n_1.0.1.0.jar
Integrating jar <--(1)/(37289)/(25)/C:\Programme\bea\modules\com.bea.core.i18n_1.0.1.0.jar
Integrating jar -->(1)/(37289)/C:\Programme\bea\modules\com.bea.core.i18n.generator_1.0.1.0.jar
Integrating jar <--(1)/(37335)/(46)/C:\Programme\bea\modules\com.bea.core.i18n.generator_1.0.1.0.jar
Integrating jar -->(1)/(37335)/C:\Programme\bea\modules\com.bea.core.management.core_1.0.1.0.jar
Integrating jar <--(1)/(37343)/(8)/C:\Programme\bea\modules\com.bea.core.management.core_1.0.1.0.jar
Integrating jar -->(1)/(37343)/C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Integrating jar <--(1)/(37389)/(46)/C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Integrating jar -->(1)/(37389)/C:\Programme\bea\modules\com.bea.core.mbean.support_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBean$Helper.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBeanBinder.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/AbstractCommoConfigurationBeanImplBeanInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/BaseModelMBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/Commo$Pair.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/Commo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoMBean.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoMBeanInstance.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanAttributeInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanConstructorInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanInfoSupport.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanNotificationInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoModelMBeanOperationInfo.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CommoOperationsException.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$1.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$Pair.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport$VoidValue.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupport.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DescriptorSupportBase.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/RequiredModelMBeanWrapper.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/SecurityMBeanData.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/StandardInterface.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/TypedMBeanData.class also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/ant/taskdefs/management/commo/antlib.xml also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/CustomMBeanImpl.j also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/DiabloCustomMBeanIntf.j also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/commo/commo.dtd also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/management/internal/mbean/SecurityReadOnlyMBean.template also in C:\Programme\bea\modules\com.bea.core.mbean.maker_1.0.1.0.jar
Integrating jar <--(1)/(37389)/(0)/C:\Programme\bea\modules\com.bea.core.mbean.support_1.0.1.0.jar
Integrating jar -->(1)/(37389)/C:\Programme\bea\modules\com.bea.core.messaging.kernel_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(37548)/(159)/C:\Programme\bea\modules\com.bea.core.messaging.kernel_1.0.1.0.jar
Integrating jar -->(1)/(37548)/C:\Programme\bea\modules\com.bea.core.resourcepool_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(37583)/(35)/C:\Programme\bea\modules\com.bea.core.resourcepool_1.0.1.0.jar
Integrating jar -->(1)/(37583)/C:\Programme\bea\modules\com.bea.core.weblogic.rmi.client_1.0.1.0.jar
Ignoring Duplicate Entry weblogic/rmi/extensions/server/_HeartbeatHelper_Stub.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(37612)/(29)/C:\Programme\bea\modules\com.bea.core.weblogic.rmi.client_1.0.1.0.jar
Integrating jar -->(1)/(37612)/C:\Programme\bea\modules\com.bea.core.weblogic.security.wls_2.0.1.0.jar
Integrating jar <--(1)/(38016)/(404)/C:\Programme\bea\modules\com.bea.core.weblogic.security.wls_2.0.1.0.jar
Integrating jar -->(1)/(38016)/C:\Programme\bea\modules\com.bea.core.weblogic.saaj_1.0.1.0.jar
Integrating jar <--(1)/(38217)/(201)/C:\Programme\bea\modules\com.bea.core.weblogic.saaj_1.0.1.0.jar
Integrating jar -->(1)/(38217)/C:\Programme\bea\modules\com.bea.core.weblogic.stax_1.0.1.0.jar
Integrating jar <--(1)/(38543)/(326)/C:\Programme\bea\modules\com.bea.core.weblogic.stax_1.0.1.0.jar
Integrating jar -->(1)/(38543)/C:\Programme\bea\modules\com.bea.core.store_1.0.1.0.jar
Skipping native/aix/ppc64/libwlfileio2.so
Skipping native/aix/ppc/libwlfileio2.so
Skipping native/hpux11/IPF32/libwlfileio2.so
Skipping native/hpux11/IPF64/libwlfileio2.so
Skipping native/hpux11/PA_RISC64/libwlfileio2.sl
Skipping native/hpux11/PA_RISC/libwlfileio2.sl
Skipping native/linux/i686/libwlfileio2.so
Skipping native/linux/ia64/libwlfileio2.so
Skipping native/linux/x86_64/libwlfileio2.so
Skipping native/solaris/sparc64/libwlfileio2.so
Skipping native/solaris/sparc/libwlfileio2.so
Skipping native/solaris/x64/libwlfileio2.so
Skipping native/solaris/x86/libwlfileio2.so
Skipping native/win/32/wlfileio2.dll
Skipping native/win/64/wlfileio2.dll
Skipping native/win/x64/wlfileio2.dll
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(38695)/(152)/C:\Programme\bea\modules\com.bea.core.store_1.0.1.0.jar
Integrating jar -->(1)/(38695)/C:\Programme\bea\modules\com.bea.core.store.gxa_1.0.1.0.jar
Integrating jar <--(1)/(38728)/(33)/C:\Programme\bea\modules\com.bea.core.store.gxa_1.0.1.0.jar
Integrating jar -->(1)/(38728)/C:\Programme\bea\modules\com.bea.core.transaction_2.0.1.0.jar
Ignoring Duplicate Entry weblogic/i18n/i18n.properties also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(38943)/(215)/C:\Programme\bea\modules\com.bea.core.transaction_2.0.1.0.jar
Integrating jar -->(1)/(38943)/C:\Programme\bea\modules\com.bea.core.utils.full_1.0.1.0.jar
Skipping native/aix/ppc64/libterminalio.so
Skipping native/aix/ppc/libterminalio.so
Skipping native/hpux11/IPF32/libterminalio.so
Skipping native/hpux11/IPF64/libterminalio.so
Skipping native/hpux11/PA_RISC64/libterminalio.sl
Skipping native/hpux11/PA_RISC/libterminalio.sl
Skipping native/linux/i686/libterminalio.so
Skipping native/linux/ia64/libterminalio.so
Skipping native/linux/s3990/libterminalio.so
Skipping native/linux/x86_64/libterminalio.so
Skipping native/macosx/pps/libterminalio.jnilib
Skipping native/solaris/sparc64/libterminalio.so
Skipping native/solaris/sparc/libterminalio.so
Skipping native/solaris/x64/libterminalio.so
Skipping native/solaris/x86/libterminalio.so
Skipping native/win/32/terminalio.dll
Skipping native/win/64/terminalio.dll
Skipping native/win/x64/terminalio.dll
Ignoring Duplicate Entry weblogic/utils/StackTraceUtilsClient.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(39367)/(424)/C:\Programme\bea\modules\com.bea.core.utils.full_1.0.1.0.jar
Integrating jar -->(1)/(39367)/C:\Programme\bea\modules\com.bea.core.utils.classloaders_1.0.1.0.jar
Integrating jar <--(1)/(39415)/(48)/C:\Programme\bea\modules\com.bea.core.utils.classloaders_1.0.1.0.jar
Integrating jar -->(1)/(39415)/C:\Programme\bea\modules\com.bea.core.utils.expressions_1.0.1.0.jar
Integrating jar <--(1)/(39429)/(14)/C:\Programme\bea\modules\com.bea.core.utils.expressions_1.0.1.0.jar
Integrating jar -->(1)/(39429)/C:\Programme\bea\modules\com.bea.core.utils.wrapper_1.0.1.0.jar
Integrating jar <--(1)/(39550)/(121)/C:\Programme\bea\modules\com.bea.core.utils.wrapper_1.0.1.0.jar
Integrating jar -->(1)/(39550)/C:\Programme\bea\modules\com.bea.core.timers_1.0.1.0.jar
Ignoring Duplicate Entry commonj/timers/CancelTimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/timers/StopTimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/timers/Timer.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/timers/TimerListener.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/timers/TimerManager.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Integrating jar <--(1)/(39581)/(31)/C:\Programme\bea\modules\com.bea.core.timers_1.0.1.0.jar
Integrating jar -->(1)/(39581)/C:\Programme\bea\modules\com.bea.core.weblogic.workmanager_1.0.1.0.jar
Ignoring Duplicate Entry commonj/work/RemoteWorkItem.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/work/Work.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/work/WorkCompletedException.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/work/WorkEvent.class also in C:\Programme\bea\weblogic10.0\server\lib\weblogic.jar
Ignoring Duplicate Entry commonj/work/WorkExcepDirk Ludwig wrote:
Joe Weinstein wrote:[...]
Hi. You should open an official support case,
but it may be that we do not support
external client JDBC with the client jar.Actually, I misspoke. I think we do supply a client
jar, and that may be true
what I said, but I see you're making your own. Can
you find out what jar you're
loading the InstrumentationSupport class from? That's
the original location of
the error, and that class doesn't exist in 10.0.Hi Joe, thanks for your reply.
First of all, let me clarify what we did and why we did it: We have a stand-alone client application that needs to communicate with a Weblogic server using the t3 protocol (we don't want IIOP or HTTP tunneling). According to the official BEA documentation (see http://e-docs.bea.com/wls/docs100/client/basics.html and http://e-docs.bea.com/wls/docs100/client/t3.html) we needed to create the wlfullclient.jar file. We did this using the Weblogic JAR Builder Tool (see http://e-docs.bea.com/wls/docs100/client/jarbuilder.html). Unfortunatley we discovered the problem mentioned in my original post when we tried to run the client with that wlfullclient.jar.
Regarding your classloading question: The InstrumentationSupportImpl class is located in the wlfullclient.jar, so it does exist in WLS 10.0 (it is also contained in the weblogic.jar). Unfortunately this JAR does not contain the required class "weblogic.diagnostics.instrumentation.InstrumentationDebug". I searched for this class and found it in the OSGI module "com.bea.core.diagnostics.instrumentor_1.0.1.0.jar" shipped with the Weblogic server. Obviously the JAR Builder Tool did not include the contents of this OSGI bundle into the wlfullclient.jar. I tried to include this OSGI bundle into the classpath of the client app manually (just for testing purposes), but this onyl resultet in another NoClassDefFoundError. This time the class "com.bea.objectweb.asm.Constants" could not be found.
What astonishes me is the fact that the connection retrieval works fine when we only have the weblogic.jar in the client applications classpath, but fails when we have the wlfullclient.jar in the classpaht. It seems that the t3 communication is handled completely different, depending on what JARs I have in the classpath. Also, JMS communication works fine in both cases (i.e. for the weblogic.jar and the wlfullclient.jar). The only thing that causes problems (at least as far as we have discovered) is getting a JDBC connection from a datasource. I simply fail to see why this is the case.
Best regards,
DirkInteresting. I hope the official support case solves your problem.
I would like to dig further, but it's too far afield for me with
the workload I have at the moment.
Joe -
Develop in JDev 10.1.3.5, test and deploy to Oracle Weblogic 11g
Hi,
I have run into some important issues when trying to migrate my Jdev 10.1.3.5 applications to JDev 11g for deployment to the latest Oracle Weblogic Application server version, see threads:
Thread: migration problems ADF/ Struts 10.1.3 -> 11.1.1.3
migration problems ADF/ Struts 10.1.3 -> 11.1.1.3
Thread: ADF/Swing/JClient application migration problem from 10.1.3.5 to 11.1.1.3
Re: ADF/Swing/JClient application migration problem from 10.1.3.5 to 11.1.1.3
- so using JDev 10.1.3.5 with deployment to Oracle Weblogic 11g is a must for us.
Questions:
1) Is there a way to use Oracle WEBLOGIC 10.3 for debugging inside JDev 10.1.3.5?
2) Can I develop with JDev 10.1.3.5 + JDK 1.5 and create an ear to deploy to Oracle WEBLOGIC 10.3 Application server with JDK 1.6 64bits?
3) Which version of ADF should I install on Oracle WEBLOGIC 10.3 to run my 10.1.3.5 application?
Your help will be appreciated
FredIs there a way to use Oracle WEBLOGIC 10.3 for debugging inside JDev 10.1.3.5?While you can't replace the embedded OC4J - you can use an external WLS server and do remote debugging on it. http://www.oracle.com/technetwork/developer-tools/jdev/remotedebugwls-086628.html
From inside JDeveloper you can also deploy directly to the WLS server.
Can I develop with JDev 10.1.3.5 + JDK 1.5 and create an ear to deploy to Oracle WEBLOGIC 10.3 Application server with JDK 1.6 64bits?Yes you can. Note that so far we haven't officially certified ADF 10.1.3 on WLS 10.3 - but from various customers and testings we think it works ok. We might certify this combination in the future.
Follow these steps to get the deployment working:
http://www.oracle.com/technetwork/developer-tools/jdev/deployingwls-091640.html
Which version of ADF should I install on Oracle WEBLOGIC 10.3 to run my 10.1.3.5 application?You always install the version of ADF that matches the one your application was developed and compiled with. -
Transaction - using XA-Resource
Hi,
We are trying to achieve transactionality in message processing using XAResource. We have a Foreign JMS server(MQ based) from were the messages are picked up by a singleton service, passed to an OSB service where it is processed. If any exception occurs during this entire transaction, we need to rollback the message onto the MQ queue.
Here is what we tried:
We created a simple java project which implements weblogic.cluster.singleton.SingletonService and MessageListener interface.
1. Here is how we get the XA resource:
QueueConnectionFactory cf = (QueueConnectionFactory) cxt.lookup("simpleQCF");
XAQueueConnectionFactory xaqcf = (XAQueueConnectionFactory)cf; //Step 1: Casting queue connection factory object to XAQuueConnectionFactory type
xaqc = xaqcf.createXAQueueConnection(); //Step 2: Creating XAQueueConnection
senderQ = (Queue) cxt.lookup("MQ_PROXY_ENTRY");
xaqs = xaqc.createXAQueueSession();//Step 3: Creating XAQueueSession
MessageConsumer queue = xaqs.createConsumer(senderQ);
queue.setMessageListener(this);
xaqc.start();//Step 4: Start XAQueueConnection
XAResource m_jmsResource = xaqs.getXAResource();//Step 5: Get XA Resource using XAQueueSessionObject
2. Next we obtain a TransactionManager object onto which we register the XAResource:
TransactionManager m_tManager;
m_tManager = (TransactionManager)cxt.lookup("javax.transaction.TransactionManager");
System.out.println("Got the Transaction Manager " + m_tManager);
m_tManager.begin();
m_transaction = m_tManager.getTransaction();
weblogic.transaction.TransactionManager weblogicTManager = ((weblogic.transaction.TransactionManager) m_tManager);
weblogicTManager.registerStaticResource("jms_resource",m_jmsResource);
m_transaction.enlistResource(m_jmsResource); // enlist the resources with the transaction
3. We get this exception while registering the XAResource:
Got the Transaction Manager ClientTM[Server01+172.24.99.246:7038+pub_do
main+t3+]
Exception in Singlenton: Resource 'jms_resource'can be registered only in a ser
ver process
javax.transaction.SystemException: Resource 'jms_resource'can be registered only
in a server process
at weblogic.transaction.internal.TransactionManagerImpl.registerStaticRe
source(TransactionManagerImpl.java:438)
at com.bt.wls.singleton.SingletonForeignJMS.activate(SingletonForeignJMS
.java:280)
at weblogic.cluster.singleton.SingletonServiceWrapper.activate(Singleton
ServiceWrapper.java:19)
at weblogic.cluster.singleton.SingletonServicesManager.activateService(S
ingletonServicesManager.java:195)
at weblogic.cluster.singleton.SingletonServicesManager_WLSkel.invoke(Unk
nown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.jav
a:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Context was initialisedjavax.naming.InitialContext@48abc
Am i missing something here? :(
Wanted to rollback the message using Java XA-Resource.
Please help us to achieve this..!Three thoughts. Enjoy!
1 - An application should never need to work directly with XA enlistement/registration or the JMS Specification's "Chapter 8" XA APIs. I personally recommend against it. Can the singleton service be changed to call into EJBs that in turn make JMS calls? If used in a standard way, the EJBs will automatically and transparently enlist/register MQ as needed. WebLogic even automatically works around some subtle differences between vendors (IIRC, MQ has one or two). For a discussion of the related specifics in JMS land, see [url http://forums.oracle.com/forums/ann.jspa?annID=1603]Oracle WebLogic Messaging Information and [url http://download.oracle.com/docs/cd/E17904_01/web.1111/e13727/interop.htm#JMSPG553]Integrating Remote and Foreign JMS Providers.
2 - I think messaging bridges are migratable. An untested/unverified alternative to a singleton service MQ forwarding pattern would be to (A) configure an exactly-once migratable target, (B) configure DB leasing, (C) configure a Messaging Bridge and target it to the migratable target. On a WL server failure, the singleton bridge should automatically migrate to a new server...
3 - The error message seems to indicate that the TM thinks the registration attempt is occuring on a client, not a WL server - not sure why. It looks like you might be trying to register/enlist a foreign (non-WebLogic) resource in a WebLogic SE client. Java EE does not specify support for this. (This works transparently for WL JMS, without resorting to specialized *.XA* interfaces, via internal "friends-and-family" extensions to JEE - a special cooperation between the WebLogic TM, WebLogic clients, and WebLogic services.)
Regards,
Tom -
Unable to start MS NoClassDefFoundError: weblogic/sip/tools/SipToolsFactory
Hi Folks,
I really need ur assistance on this, I am failing to start my weblogic managed server which is on WL 10.3.4 and hosted on Windows 2008R2 server.
I am getting the below exception:
<<WLS Kernel>> <> <> <1365769487402> <BEA-000386> <Server subsystem failed. Reason: java.lang.NoClassDefFoundError: weblogic/sip/tools/SipToolsFactory
java.lang.NoClassDefFoundError: weblogic/sip/tools/SipToolsFactory
at weblogic.sip.plugin.SipPlugin.startService(SipPlugin.java:25)
at weblogic.server.ServiceActivator.start(ServiceActivator.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: java.lang.ClassNotFoundException: weblogic.sip.tools.SipToolsFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
at weblogic.sip.plugin.SipPlugin.startService(SipPlugin.java:25)
at weblogic.server.ServiceActivator.start(ServiceActivator.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Now the I dont want to use the SIP and have done the following:
1. Disabled the SIP from my Weblogic Console and restarted the Admin Server
2. Modified my init script from
<setenv name="WLSS_HOME">
<value>E:\Oracle\Middleware\wlserver_10.3/sip</value>
</setenv>
<setenv name="SIP_ENABLED">
<value>true</value>
</setenv>
to
<setenv name="WLSS_HOME">
<value>E:\Oracle\Middleware\wlserver_10.3/sip</value>
</setenv>
<setenv name="SIP_ENABLED">
<value>false</value>
</setenv>
3. Modified my class paths so SIP wont be called.
Now the interesting part, actually this setup is a running setup and I have installed it from scratch..The thing here is it might sound silly....But the weblogic still picks up the Classpath for SIP during startup, be it via node manger or even on the server.
<WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
E:\Oracle\Middleware\user_projects\domains\DOMAIN_XYZ\lib\sipactivator.jar>
<BEA-002647> <The service plugin, com.oracle.core.sip.activator, was added from E:\Oracle\Middleware\user_projects\domains\DOMAIN_XYZ\lib\sipactivator.jar.>
If you see its a extension lib file, now my query without deleting the file from the extension lib how can i get rid of it.
Hope someone can help me out.
ThanksHi Kishore,
Thanks for the update, but I had already done those changes, please find my current config.xml but I noticed one thing when I restart my weblogic instance it creates a new config.xml with a name like this config.xml and it doesnt reflect the original config.xml which I am trying to use. I some how feel that the config.xml is being picked up while stating the instance instead of the original config.xml.
I am placing both of them below with the respective names.
config.xml (the one i am trying to use)
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>TEST</name>
<domain-version>10.3.4.0</domain-version>
<security-configuration>
<name>TEST</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}xxxxx</credential-encrypted>
<node-manager-username>wlxxxx</node-manager-username>
<node-manager-password-encrypted>{AES}xxxxx</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<machine>localhost</machine>
<listen-address></listen-address>
</server>
<server>
<name>Test01</name>
<machine>localhost</machine>
<listen-port>9001</listen-port>
<listen-address></listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
</server-start>
</server>
<server>
<name>Test02</name>
<machine>Machine2</machine>
<listen-port>9001</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test03</name>
<machine>localhost</machine>
<listen-port>9002</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test04</name>
<machine>Machine2</machine>
<listen-port>9002</listen-port>
<listen-address></listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<class-path>E:\Oracle\Middleware\user_projects\domains\TEST\properties\Test</class-path>
<arguments>-Xms128m -Xmx512m -XX:MaxPermSize=256m</arguments>
</server-start>
</server>
<server>
<name>Test_ES01</name>
<machine>localhost</machine>
<listen-port>9003</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_ES02</name>
<machine>Machine2</machine>
<listen-port>9003</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_ES03</name>
<machine>localhost</machine>
<listen-port>9004</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_ES04</name>
<machine>Machine2</machine>
<listen-port>9004</listen-port>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_HK01</name>
<machine>localhost</machine>
<listen-port>9005</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_HK02</name>
<machine>Machine2</machine>
<listen-port>9005</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_HK03</name>
<machine>localhost</machine>
<listen-port>9006</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test_HK04</name>
<machine>Machine2</machine>
<listen-port>9006</listen-port>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start></server-start>
</server>
<server>
<name>Test05</name>
<machine>localhost</machine>
<listen-port>9007</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>Test07</name>
<machine>localhost</machine>
<listen-port>9008</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
</server>
<server>
<name>Test06</name>
<machine>Machine2</machine>
<listen-port>9007</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<class-path>E:\Oracle\Middleware\user_projects\domains\TEST\properties\Test</class-path>
<arguments>-Xms128m -Xmx512m -XX:MaxPermSize=256m</arguments>
</server-start>
</server>
<server>
<name>Test08</name>
<machine>Machine2</machine>
<listen-port>9008</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<server-start>
<java-vendor>Sun</java-vendor>
<class-path>E:\Oracle\Middleware\user_projects\domains\TEST\properties\Test</class-path>
<arguments>-Xms128m -Xmx512m -XX:MaxPermSize=256m</arguments>
</server-start>
</server>
<server>
<name>Test_IN01</name>
<jms-thread-pool-size>0</jms-thread-pool-size>
<machine>localhost</machine>
<listen-port>9003</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<server-debug>
<debug-scope>
<name>default</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.application</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.classloader</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.cluster</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.connector</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.core</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.debug</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.default</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.deploy</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.descriptor</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.diagnostics</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.ejb</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.iiop</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.jdbc</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.jms</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.jpa</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.management</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.messaging</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.messagingbridge</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.protocol</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.sca</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.security</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.servlet</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.store</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.t3</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.transaction</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.work</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.workarea</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic.wtc</name>
<enabled>false</enabled>
</debug-scope>
</server-debug>
<listen-address></listen-address>
<xml-registry xsi:nil="true"></xml-registry>
<xml-entity-cache xsi:nil="true"></xml-entity-cache>
<default-file-store>
<synchronous-write-policy>Direct-Write</synchronous-write-policy>
</default-file-store>
</server>
<server>
<name>Test_IN02</name>
<jms-thread-pool-size>0</jms-thread-pool-size>
<machine>Machine2</machine>
<listen-port>9003</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<server-debug>
<debug-scope>
<name>default</name>
<enabled>false</enabled>
</debug-scope>
<debug-scope>
<name>weblogic</name>
<enabled>false</enabled>
</debug-scope>
<debug-libraries>true</debug-libraries>
<class-finder>true</class-finder>
<classpath-servlet>true</classpath-servlet>
<class-loader>true</class-loader>
<debug-server-life-cycle>true</debug-server-life-cycle>
</server-debug>
<listen-address></listen-address>
<xml-registry xsi:nil="true"></xml-registry>
<xml-entity-cache xsi:nil="true"></xml-entity-cache>
<default-file-store>
<synchronous-write-policy>Cache-Flush</synchronous-write-policy>
</default-file-store>
</server>
<server>
<name>Test_IN03</name>
<jms-thread-pool-size>0</jms-thread-pool-size>
<machine>localhost</machine>
<listen-port>9004</listen-port>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<listen-address></listen-address>
<xml-registry xsi:nil="true"></xml-registry>
<xml-entity-cache xsi:nil="true"></xml-entity-cache>
<default-file-store>
<synchronous-write-policy>Cache-Flush</synchronous-write-policy>
</default-file-store>
</server>
<server>
<name>Test_IN04</name>
<ssl>
<enabled>false</enabled>
</ssl>
<machine>Machine2</machine>
<listen-port>9004</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<cluster xsi:nil="true"></cluster>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
</web-server-log>
</web-server>
<java-compiler>javac</java-compiler>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
<server-diagnostic-config>
<wldf-diagnostic-volume>Low</wldf-diagnostic-volume>
</server-diagnostic-config>
</server>
<embedded-ldap>
<name>TEST</name>
<credential-encrypted>{AES}xxxxx</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.4.0</configuration-version>
<app-deployment>
<name>Test_hkapp01</name>
<target>Test_HK01</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Test_hkapp01</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>Test_hkrp01</name>
<target>Test_HK03</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Test_hkrp01</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>Testapp05</name>
<target>Test05</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Testapp05\test.war</source-path>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>testrp07</name>
<target>Test07/target>
<module-type>war</module-type>
<source-path>applications\TestApp\Testrp07\Testrp.war</source-path>
<deployment-order>100</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>Testrp08</name>
<target>Test08</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Testrp08\Testrp.war</source-path>
<deployment-order>100</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>stage</staging-mode>
</app-deployment>
<app-deployment>
<name>Testapp06</name>
<target>Test06</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Testapp06\Test.war</source-path>
<deployment-order>100</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>stage</staging-mode>
</app-deployment>
<app-deployment>
<name>Test_hkrp04</name>
<target>Test_HK04</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Test_hkrp04</source-path>
<deployment-order>100</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>stage</staging-mode>
</app-deployment>
<app-deployment>
<name>Test_hkapp02</name>
<target>Test_HK02</target>
<module-type>war</module-type>
<source-path>applications\TestApp\Test_hkapp02</source-path>
<deployment-order>100</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
<staging-mode>stage</staging-mode>
</app-deployment>
<machine>
<name>localhost</name>
<node-manager>
<name>localhost</name>
<nm-type>SSL</nm-type>
<listen-address>xxx-xxx-xxx-xxx</listen-address>
<listen-port>5556</listen-port>
<debug-enabled>false</debug-enabled>
</node-manager>
</machine>
<machine>
<name>Machine2</name>
<node-manager>
<nm-type>SSL</nm-type>
<listen-address>xxx-xxx-xxx-xxx</listen-address>
<listen-port>5556</listen-port>
<debug-enabled>false</debug-enabled>
</node-manager>
</machine>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>Test01app_DS</name>
<target>Test01</target>
<descriptor-file-name>jdbc/Test01app_DS-4659-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>Test03rp_DS</name>
<target>Test03</target>
<descriptor-file-name>jdbc/Test03rp_DS-3850-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>Test02app_DS</name>
<target>Test02</target>
<descriptor-file-name>jdbc/Test02app_DS-7531-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<jdbc-system-resource>
<name>Test04rp_DS</name>
<target>Test04</target>
<descriptor-file-name>jdbc/Test04rp_DS-5676-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Error when ejb deployment in WLS 9.1 clustered environment
Hello,
We have a WLS 9.1 cluster consisting of one admin server and two managed servers. we are deploying ejb jar,It is succeed on the first managed server but fail on the second managed server. The admin console and for the second managed server contains the following log(below given). I checked the classpath of two managed servers, It is same in two servers. when i restarted the two managed servers, application is in active state but not running in second managed sever complining for one ejb class that the jndi-name in the weblogic-ejb-jar.xml is not correct. If it is not correct it should not run in first managed server also right.
please help me whether Am I doing something wrong or is this a bug?
below given the log when i deployed the ejb.
####<May 18, 2007 9:49:22 AM GMT> <Error> <Deployer> <tool2> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1179481762802> <BEA-149265> <Failure occured in the execution of deployment request with ID '1179481757718' for task '8'. Error is: 'java.lang.AssertionError: Assertion violated'
java.lang.AssertionError: Assertion violated
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.cluster.migration.MigrationManager.unregister(MigrationManager.java:246)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.onUndeploy(MessageDrivenBeanInfoImpl.java:999)
at weblogic.ejb.container.manager.BaseEJBManager.undeploy(BaseEJBManager.java:467)
at weblogic.ejb.container.manager.MessageDrivenManager.undeploy(MessageDrivenManager.java:570)
at weblogic.ejb.container.deployer.EJBDeployer.deactivate(EJBDeployer.java:1817)
at weblogic.ejb.container.deployer.EJBModule.doDeactivate(EJBModule.java:1041)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:420)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:567)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:131)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:101)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:126)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:329)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:845)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1246)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:432)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
java.lang.AssertionError: Assertion violated
at weblogic.utils.Debug.assertion(Debug.java:57)
at weblogic.cluster.migration.MigrationManager.unregister(MigrationManager.java:246)
at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.onUndeploy(MessageDrivenBeanInfoImpl.java:999)
at weblogic.ejb.container.manager.BaseEJBManager.undeploy(BaseEJBManager.java:467)
at weblogic.ejb.container.manager.MessageDrivenManager.undeploy(MessageDrivenManager.java:570)
at weblogic.ejb.container.deployer.EJBDeployer.deactivate(EJBDeployer.java:1817)
at weblogic.ejb.container.deployer.EJBModule.doDeactivate(EJBModule.java:1041)
at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:420)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:104)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:339)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:68)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:60)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:640)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:252)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:567)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:131)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:101)
at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:126)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:329)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:845)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1246)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:432)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
>
####<May 18, 2007 9:49:22 AM GMT> <Error> <Deployer> <tool2> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1179481762823> <BEA-149202> <Encountered an exception while attempting to commit the 7 task for the application 'MyEJB'.
Regards,
mohan
Edited by raj_bea_raj at 05/29/2007 1:35 AM
Edited by raj_bea_raj at 05/29/2007 1:41 AMIf you're using OC4J standalone, use the latest available OC4J, 10.1.3.3.
If you're using a manage OC4J, ie. Application Server, upgrade to the latest available version and upgrade your JDK. The provided JDK might be outdated.
--olaf -
WLS 9.2: MigrationException: Could not start JTAMT on local server
I have configured a two machine WLS 9.2 Cluster with two Managed Servers.
When I try to start the Managed Server through the Node Manager from Admin
Server's WLS Console, it fails with the following error (
actually both Managed Servers fail with the same error):
weblogic.cluster.migration.MigrationException: Could not start JTAMT on
local server because it could not be deactivated on the current host.
at
weblogic.transaction.internal.TransactionRecoveryService.deployAllTransactionRecoveryServices(TransactionRecoveryService.java:400)
at
weblogic.transaction.internal.TransactionRecoveryService.resume(TransactionRecoveryService.java:170)
at
weblogic.transaction.internal.TransactionRecoveryService.start(TransactionRecoveryService.java:181)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
This message resides in file:
bea920\weblogic92\common\nodemanager\servers\MANAGED-SERVER1\logs\MANAGED-SERVER1.log
The WLS installation was done including the Node Manager Service.
Is this error message familiar at all and what could be done to fix it?
These Managed Servers run on Win2000 and Win2003 respectively. Should I do
something to the OS (Enable XA Txs in Control Panel/MSDTC)?Did you start AdminServer before try to start MANAGED-SERVER1?
Did you ever migrate Transaction Recovery Service of MANAGED-SERVER1 to other servers?
If the problem still exist, you can enable the debug option "DebugJTAMigration" and post the stack trace. -
I have in my WLS 7.0 cluster enviroment error like this:
java.lang.ClassCastException: weblogic.servlet.internal.session.MemorySessionContext Start server side stack trace: java.lang.ClassCastException: weblogic.servlet.internal.session.MemorySessionContext at weblogic.servlet.internal.session.SessionData.getContext(SessionData.java:359) at weblogic.servlet.internal.session.ReplicatedSessionData.becomeSecondary(ReplicatedSessionData.java:180) at weblogic.cluster.replication.WrappedRO.<init>(WrappedRO.java:34) at weblogic.cluster.replication.ReplicationManager$wroManager.create(ReplicationManager.java:339) at weblogic.cluster.replication.ReplicationManager.create(ReplicationManager.java:1059) at weblogic.cluster.replication.ReplicationManager_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:346) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:300) at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:762) at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:295) at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133) End server side stack trace
Have you defined a defaultwebapp for your WLS cluster ?
Kumar Allamraju wrote:
> Pls provide more details.
> when does it happen? Can you consistently reproduce this stacktrace?
>
> thx
> Kumar
>
> Marek wrote:
>
> > I have in my WLS 7.0 cluster enviroment error like this:
> >
> > java.lang.ClassCastException: weblogic.servlet.internal.session.MemorySessionContext Start server side stack trace: java.lang.ClassCastException: weblogic.servlet.internal.session.MemorySessionContext at weblogic.servlet.internal.session.SessionData.getContext(SessionData.java:359) at weblogic.servlet.internal.session.ReplicatedSessionData.becomeSecondary(ReplicatedSessionData.java:180) at weblogic.cluster.replication.WrappedRO.<init>(WrappedRO.java:34) at weblogic.cluster.replication.ReplicationManager$wroManager.create(ReplicationManager.java:339) at weblogic.cluster.replication.ReplicationManager.create(ReplicationManager.java:1059) at weblogic.cluster.replication.ReplicationManager_WLSkel.invoke(Unknown Source) at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:346) at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:300) at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:762) at weblogic.rmi.internal.Bas
> icServerRef.handleRequest(BasicServerRef.java:295) at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133) End server side stack trace
> >
Rajesh Mirchandani
Developer Relations Engineer
BEA Support
-
WLS 7.0 SP2 Cluster deployment problems
I am having problems deploying our application to a weblogic cluster. Environment is
windows 2000/XP and weblogic 7.0 SP2.
Here's a simplified version of the cluster.
I have 2 managed servers that are part of the cluster.I have defined the managed server
configuration in the admin server's config.xml as below.
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine1" Name="Server1" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server1">
<COM Name="Server1"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server1"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server1" UserPreferred
er="Server1"/>
<JTARecoveryService Name="Server1"/>
<KernelDebug Name="Server1"/>
<Log Name="Server1"/>
<SSL Enabled="false" ListenPort="7772" Name="Server1"/>
<ServerDebug Name="Server1"/>
<ServerStart Name="Server1"/>
<WebServer Name="Server1"/>
</Server>
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine2" Name="Server2" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server2">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferred
er="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log Name="Server2"/>
<SSL Enabled="false" ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer Name="Server2"/>
</Server>
<Server AcceptBacklog="50" HelpPageURL="c:/public/as"
InstrumentStackTraceEnabled="true"
JDBCLogFileName="myserver\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7770" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="myserver"
NativeIOEnabled="false" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="company XMLRegist
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="
rver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileMinSize="4096" FileName="myserver\company.log"
FileTimeSpan="24" Name="myserver"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7775" Name="myserver"/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="go" LogFileName="myserver\access.log"
LoggingEnabled="true" Name="myserver" Targets="myserver"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="600" Name="companyShutdown2"
Targets="myCluster,Server1,Server2,myserver"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="675" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="myserver"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server1"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactory
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transf
rFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
/Domain>
The managed server config.xml looks like below.
$ cat config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!--Last updated on: Fri Nov 12 15:46:28 CET 2004, If your domain is active, ple
ase do not edit the config.xml file. Any changes made to that file while the dom
ain is active will not have any effect on the domain's configuration and are lik
ely to be lost. If your domain is inactive, you may edit this file with an XML e
ditor. If you do so, please refer to the BEA Weblogic Server Configuration Refer
ence documentation available from http://edocs.bea.com/wls/docs70/config_xml.
In general, we recommend that changes to your configuration file be made through
the Administration Console.-->
<Domain ConfigurationVersion="7.0.2.0" Name="company">
<Application Deployed="true" Name="AGENTMANAGER"
Path=".\deployments\activity" TwoPhase="false">
<EJBComponent DeploymentOrder="20" Name="AGENTMANAGER"
Targets="Server2" URI="AGENTMANAGER.jar"/>
</Application>
<Application Deployed="true" Name="MDBERT1"
Path=".\deployments\service" TwoPhase="false">
<EJBComponent DeploymentOrder="46" Name="MDBERT1"
Targets="Server2" URI="MDBERT1.jar"/>
</Application>
<Application Deployed="true" Name="TM" Path=".\deployments\service" TwoPhase
="false">
<EJBComponent DeploymentOrder="15" Name="TM.jar"
Targets="Server2" URI="TM.jar"/>
</Application>
</Application>
<Application Deployed="true" Name="go" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="go" Targets="Server2" URI="go"/>
</Application>
<Application Deployed="true" Name="im" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="im" Targets="Server2" URI="im"/>
</Application>
<Application Deployed="true" Name="pmcl" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="pmcl" Targets="Server2" URI="pmcl"/>
</Application>
<ApplicationManager Name="company"/>
<CachingRealm ACLCacheEnable="true" ACLCacheSize="2000"
ACLCacheTTLNegative="60" ACLCacheTTLPositive="60"
AuthenticationCacheEnable="false" AuthenticationCacheSize="211"
AuthenticationCacheTTLNegative="10"
AuthenticationCacheTTLPositive="60" BasicRealm="companyRealm"
CacheCaseSensitive="true" GroupCacheEnable="true"
GroupCacheSize="100" GroupCacheTTLNegative="60"
GroupCacheTTLPositive="60" GroupMembershipCacheTTL="17700"
Name="companyCacheRealm" PermissionCacheEnable="true"
PermissionCacheSize="211" PermissionCacheTTLNegative="10"
PermissionCacheTTLPositive="60" UserCacheEnable="true"
UserCacheSize="2000" UserCacheTTLNegative="60" UserCacheTTLPositive="60"
/>
<CustomRealm Name="companyRealm" Password="{3DES}2LwBLCayHcc=" RealmClassName
="company.appserver.weblogic.WLRealmStub"/>
<EmbeddedLDAP
Credential="{3DES}VW4H4+7OUny8Er78dGhHbIqbB6w7l9btTnLbz4Cu1jE=" Name="Cy
gent"/>
<FileRealm Name="myFileRealm"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="5"
MaxCapacity="100" Name="Geneva0"
PreparedStatementCacheSize="100"
Properties="user=admin;password=;server=LSUP1"
Targets="Server2" URL="jdbc:weblogic:oracle"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="100" Name="JMSDBConnectionPool"
PreparedStatementCacheSize="100"
Properties="user=admin;password=gent;url=jdbc:oracle:thin:@x.x.x.179:1521:SUP1;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
Targets="Server2" URL="jdbc:oracle:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="100" Name="ejbPool"
PreparedStatementCacheSize="100"
Properties="user=company_admin;url=jdbc:oracle:thin:@10.28.138.179:1521:P
MCLSUP1;password=company;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
SupportsLocalTransaction="true" Targets="Server2,Server2" URL="jdbc:orac
le:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCDataSource JNDIName="geneva.jdbc.GenevaNonTrans0"
Name="GenevaNonTrans0" PoolName="Geneva0" Targets="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="geneva.jdbc.Geneva0" Name="Geneva0" PoolName="Geneva0" Targets
="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="false"
JNDIName="authJtsDataSource" Name="authJtsDataSource"
PoolName="ejbPool" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.ctm.QCFactory"
Name="CTMQCFactory" Targets="Server2"
UserTransactionsEnabled="true" XAConnectionFactoryEnabled="true"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.QCFactory"
Name="QCFactory" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.TCFactory"
Name="TCFactory" Targets="Server2"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyCTMJDBCStore" PrefixName="CTM"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyJMSJDBCStore" PrefixName="IM"/>
<JMSServer Name="CIM JMSServer-0" Store="companyJMSJDBCStore" Targets="Server
2">
<JMSQueue JNDIName="javax.jms.inRequestQueue" Name="inRequestQueue"/>
<JMSQueue JNDIName="javax.jms.inResponseQueue" Name="inResponseQueue"/>
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
<JMSQueue JNDIName="javax.jms.outRequestQueue" Name="outRequestQueue"/>
<JMSQueue JNDIName="javax.jms.outResponseQueue" Name="outResponseQueue"/
>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inRequestQueue"
MessagesMaximum="10" Name="InboundRequestSessionPool" Selector="
TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inResponseQueue"
MessagesMaximum="10"
Name="InboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outRequestQueue"
MessagesMaximum="10"
Name="OutboundRequestConnectionPool" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outResponseQueue"
MessagesMaximum="10"
Name="OutboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSTopic JNDIName="javax.jms.CreateOfferTopic" Name="createOfferTopic"/
>
<JMSTopic JNDIName="javax.jms.CreateProductTopic" Name="createProductTop
ic"/>
</JMSServer>
<JMSServer Name="JMSServer-0">
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
</JMSServer>
<JMSServer DeploymentOrder="1" Name="Task Manager Server-1"
Store="companyCTMJDBCStore" Targets="Server2">
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="activate_task"
Name="AT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="complete_process_flow" Name="CPF1 Queue" RedeliveryL
imit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="complete_task"
Name="CT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="error_task" Name="ERT1 Queue" RedeliveryLimit="1"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="escalate_task"
Name="ET1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="recover_process_flow" Name="RPF1 Queue" RedeliveryLi
mit="5"/>
<JMSQueue JNDIName="terminate_process_flow" Name="TPF1 Queue" Redelivery
Limit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue"
JNDIName="terminate_task" Name="TT1 Queue" RedeliveryLimit="5"/>
</JMSServer>
<JTA Name="company" TimeoutSeconds="3600"/>
<Log FileName="./logs/company.log" Name="company"/>
<Machine Name="MyMachine">
<NodeManager Name="MyMachine"/>
</Machine>
<PasswordPolicy MinimumPasswordLength="8" Name="mypasswordpolicy"/>
<Realm CachingRealm="companyCacheRealm" FileRealm="myFileRealm" Name="myRealm
"/>
<SNMPAgent Name="company"/>
<Security CompatibilityMode="true" Name="company"
PasswordPolicy="mypasswordpolicy" Realm="myRealm" RealmSetup="true"/>
<SecurityConfiguration Credential="{3DES}Osb3tCLDbyc="
CredentialGenerated="false" Name="company"/>
<Server HelpPageURL="c:/public/as" InstrumentStackTraceEnabled="true"
JDBCLogFileName="Server2\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7771" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="Server2"
NativeIOEnabled="true" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_Server2" XMLRegistry="company XMLRegistry">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferredSer
ver="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log FileMinSize="4096" FileName="Server2\company.log"
FileTimeSpan="24" Name="Server2"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer DefaultWebApp="go" LogFileName="Server2\access.log"
LoggingEnabled="true" Name="Server2" Targets="Server2"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="200" Name="companyShutdown2" Targets="Server2"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="175" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="100" FailureIsFatal="true"
Name="companyStartup1" Targets="Server2,Server2"/>
<StartupClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="125" FailureIsFatal="true"
Name="TaskManagerStartup" Targets="Server2"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImp
l"
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transform
erFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
</Domain>
I start the admin server first followed by one of the managed servers. The admin server
starts fine. When I start the managed server 1, it is not deploying the application on the
managed server and I am getting the following exception on the managed server.
Setting custom initial context factory<Nov 25, 2004 11:54:44 PM CET> <Notice> <Management> <141053> <Application Polle
r not started for production server.>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <Management> <141030> <Starting discover
y of Managed Server... This feature is on by default, you may turn this off by p
assing -Dweblogic.management.discover=false>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <WebLogicServer> <000354> <Thread "Liste
nThread.Default" listening on port 7770>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.x and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server2 on listen address x.x.x.223 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.222 and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server1 on listen address x.x.x.222 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Notice> <WebLogicServer> <000329> <Started WebLo
gic Admin Server "myserver" for domain "company" running in Production Mode>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000360> <Server starte
d in RUNNING mode>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server1,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server1,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
Can somebody help me find out why this problem is occuring..?I am having problems deploying our application to a weblogic cluster. Environment is
windows 2000/XP and weblogic 7.0 SP2.
Here's a simplified version of the cluster.
I have 2 managed servers that are part of the cluster.I have defined the managed server
configuration in the admin server's config.xml as below.
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine1" Name="Server1" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server1">
<COM Name="Server1"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server1"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server1" UserPreferred
er="Server1"/>
<JTARecoveryService Name="Server1"/>
<KernelDebug Name="Server1"/>
<Log Name="Server1"/>
<SSL Enabled="false" ListenPort="7772" Name="Server1"/>
<ServerDebug Name="Server1"/>
<ServerStart Name="Server1"/>
<WebServer Name="Server1"/>
</Server>
<Server Cluster="myCluster" ExpectedToRun="false" ListenPort="7771"
Machine="machine2" Name="Server2" ServerVersion="7.0.2.0"
WeblogicPluginEnabled="false" XMLEntityCache="XMLCacheMBean_Server2">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferred
er="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log Name="Server2"/>
<SSL Enabled="false" ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer Name="Server2"/>
</Server>
<Server AcceptBacklog="50" HelpPageURL="c:/public/as"
InstrumentStackTraceEnabled="true"
JDBCLogFileName="myserver\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7770" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="myserver"
NativeIOEnabled="false" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_myserver" XMLRegistry="company XMLRegist
<COM Name="myserver"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="myserver"/>
<JTAMigratableTarget Cluster="" Name="myserver" UserPreferredServer="
rver"/>
<JTARecoveryService Name="myserver"/>
<KernelDebug Name="myserver"/>
<Log FileMinSize="4096" FileName="myserver\company.log"
FileTimeSpan="24" Name="myserver"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7775" Name="myserver"/>
<ServerDebug Name="myserver"/>
<ServerStart Name="myserver"/>
<WebServer DefaultWebApp="go" LogFileName="myserver\access.log"
LoggingEnabled="true" Name="myserver" Targets="myserver"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="600" Name="companyShutdown2"
Targets="myCluster,Server1,Server2,myserver"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="675" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="myserver"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server1"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLEntityCache Name="XMLCacheMBean_myserver"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactory
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transf
rFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
/Domain>
The managed server config.xml looks like below.
$ cat config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!--Last updated on: Fri Nov 12 15:46:28 CET 2004, If your domain is active, ple
ase do not edit the config.xml file. Any changes made to that file while the dom
ain is active will not have any effect on the domain's configuration and are lik
ely to be lost. If your domain is inactive, you may edit this file with an XML e
ditor. If you do so, please refer to the BEA Weblogic Server Configuration Refer
ence documentation available from http://edocs.bea.com/wls/docs70/config_xml.
In general, we recommend that changes to your configuration file be made through
the Administration Console.-->
<Domain ConfigurationVersion="7.0.2.0" Name="company">
<Application Deployed="true" Name="AGENTMANAGER"
Path=".\deployments\activity" TwoPhase="false">
<EJBComponent DeploymentOrder="20" Name="AGENTMANAGER"
Targets="Server2" URI="AGENTMANAGER.jar"/>
</Application>
<Application Deployed="true" Name="MDBERT1"
Path=".\deployments\service" TwoPhase="false">
<EJBComponent DeploymentOrder="46" Name="MDBERT1"
Targets="Server2" URI="MDBERT1.jar"/>
</Application>
<Application Deployed="true" Name="TM" Path=".\deployments\service" TwoPhase
="false">
<EJBComponent DeploymentOrder="15" Name="TM.jar"
Targets="Server2" URI="TM.jar"/>
</Application>
</Application>
<Application Deployed="true" Name="go" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="go" Targets="Server2" URI="go"/>
</Application>
<Application Deployed="true" Name="im" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="im" Targets="Server2" URI="im"/>
</Application>
<Application Deployed="true" Name="pmcl" Path=".\applications"
StagedTargets="" TwoPhase="false">
<WebAppComponent Name="pmcl" Targets="Server2" URI="pmcl"/>
</Application>
<ApplicationManager Name="company"/>
<CachingRealm ACLCacheEnable="true" ACLCacheSize="2000"
ACLCacheTTLNegative="60" ACLCacheTTLPositive="60"
AuthenticationCacheEnable="false" AuthenticationCacheSize="211"
AuthenticationCacheTTLNegative="10"
AuthenticationCacheTTLPositive="60" BasicRealm="companyRealm"
CacheCaseSensitive="true" GroupCacheEnable="true"
GroupCacheSize="100" GroupCacheTTLNegative="60"
GroupCacheTTLPositive="60" GroupMembershipCacheTTL="17700"
Name="companyCacheRealm" PermissionCacheEnable="true"
PermissionCacheSize="211" PermissionCacheTTLNegative="10"
PermissionCacheTTLPositive="60" UserCacheEnable="true"
UserCacheSize="2000" UserCacheTTLNegative="60" UserCacheTTLPositive="60"
/>
<CustomRealm Name="companyRealm" Password="{3DES}2LwBLCayHcc=" RealmClassName
="company.appserver.weblogic.WLRealmStub"/>
<EmbeddedLDAP
Credential="{3DES}VW4H4+7OUny8Er78dGhHbIqbB6w7l9btTnLbz4Cu1jE=" Name="Cy
gent"/>
<FileRealm Name="myFileRealm"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="weblogic.jdbc.oci.Driver" InitialCapacity="5"
MaxCapacity="100" Name="Geneva0"
PreparedStatementCacheSize="100"
Properties="user=admin;password=;server=LSUP1"
Targets="Server2" URL="jdbc:weblogic:oracle"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="100" Name="JMSDBConnectionPool"
PreparedStatementCacheSize="100"
Properties="user=admin;password=gent;url=jdbc:oracle:thin:@x.x.x.179:1521:SUP1;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
Targets="Server2" URL="jdbc:oracle:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.xa.client.OracleXADataSource"
InitialCapacity="5" MaxCapacity="100" Name="ejbPool"
PreparedStatementCacheSize="100"
Properties="user=company_admin;url=jdbc:oracle:thin:@10.28.138.179:1521:P
MCLSUP1;password=company;dll=ocijdbc8;dataSourceName=ejbPool;protocol=thin"
SupportsLocalTransaction="true" Targets="Server2,Server2" URL="jdbc:orac
le:thin:@x.x.x.x:1521:LSUP1"/>
<JDBCDataSource JNDIName="geneva.jdbc.GenevaNonTrans0"
Name="GenevaNonTrans0" PoolName="Geneva0" Targets="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="true"
JNDIName="geneva.jdbc.Geneva0" Name="Geneva0" PoolName="Geneva0" Targets
="Server2"/>
<JDBCTxDataSource EnableTwoPhaseCommit="false"
JNDIName="authJtsDataSource" Name="authJtsDataSource"
PoolName="ejbPool" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.ctm.QCFactory"
Name="CTMQCFactory" Targets="Server2"
UserTransactionsEnabled="true" XAConnectionFactoryEnabled="true"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.QCFactory"
Name="QCFactory" Targets="Server2"/>
<JMSConnectionFactory DefaultRedeliveryDelay="5000"
DefaultTimeToDeliver="3000" JNDIName="company.im.TCFactory"
Name="TCFactory" Targets="Server2"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyCTMJDBCStore" PrefixName="CTM"/>
<JMSJDBCStore ConnectionPool="JMSDBConnectionPool"
Name="companyJMSJDBCStore" PrefixName="IM"/>
<JMSServer Name="CIM JMSServer-0" Store="companyJMSJDBCStore" Targets="Server
2">
<JMSQueue JNDIName="javax.jms.inRequestQueue" Name="inRequestQueue"/>
<JMSQueue JNDIName="javax.jms.inResponseQueue" Name="inResponseQueue"/>
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
<JMSQueue JNDIName="javax.jms.outRequestQueue" Name="outRequestQueue"/>
<JMSQueue JNDIName="javax.jms.outResponseQueue" Name="outResponseQueue"/
>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inRequestQueue"
MessagesMaximum="10" Name="InboundRequestSessionPool" Selector="
TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="company.service.mg.impl.InboundMsgListener"
Name="InboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.inResponseQueue"
MessagesMaximum="10"
Name="InboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundRequestSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outRequestQueue"
MessagesMaximum="10"
Name="OutboundRequestConnectionPool" Selector="TRUE"/>
</JMSSessionPool>
<JMSSessionPool ConnectionFactory="company.im.QCFactory"
ListenerClass="pmcl.company.service.mg.impl.PmclOutboundMsgListener"
Name="OutboundResponseSessionPool" SessionsMaximum="5">
<JMSConnectionConsumer
Destination="javax.jms.outResponseQueue"
MessagesMaximum="10"
Name="OutboundResponseConnectionConsumer" Selector="TRUE"/>
</JMSSessionPool>
<JMSTopic JNDIName="javax.jms.CreateOfferTopic" Name="createOfferTopic"/
>
<JMSTopic JNDIName="javax.jms.CreateProductTopic" Name="createProductTop
ic"/>
</JMSServer>
<JMSServer Name="JMSServer-0">
<JMSQueue JNDIName="javax.jms.logQueue" Name="logQueue"/>
</JMSServer>
<JMSServer DeploymentOrder="1" Name="Task Manager Server-1"
Store="companyCTMJDBCStore" Targets="Server2">
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="activate_task"
Name="AT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="complete_process_flow" Name="CPF1 Queue" RedeliveryL
imit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="complete_task"
Name="CT1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="error_task" Name="ERT1 Queue" RedeliveryLimit="1"/>
<JMSQueue ErrorDestination="ERT1 Queue" JNDIName="escalate_task"
Name="ET1 Queue" RedeliveryLimit="5"/>
<JMSQueue JNDIName="recover_process_flow" Name="RPF1 Queue" RedeliveryLi
mit="5"/>
<JMSQueue JNDIName="terminate_process_flow" Name="TPF1 Queue" Redelivery
Limit="5"/>
<JMSQueue ErrorDestination="ERT1 Queue"
JNDIName="terminate_task" Name="TT1 Queue" RedeliveryLimit="5"/>
</JMSServer>
<JTA Name="company" TimeoutSeconds="3600"/>
<Log FileName="./logs/company.log" Name="company"/>
<Machine Name="MyMachine">
<NodeManager Name="MyMachine"/>
</Machine>
<PasswordPolicy MinimumPasswordLength="8" Name="mypasswordpolicy"/>
<Realm CachingRealm="companyCacheRealm" FileRealm="myFileRealm" Name="myRealm
"/>
<SNMPAgent Name="company"/>
<Security CompatibilityMode="true" Name="company"
PasswordPolicy="mypasswordpolicy" Realm="myRealm" RealmSetup="true"/>
<SecurityConfiguration Credential="{3DES}Osb3tCLDbyc="
CredentialGenerated="false" Name="company"/>
<Server HelpPageURL="c:/public/as" InstrumentStackTraceEnabled="true"
JDBCLogFileName="Server2\jdbc.log" JDBCLoggingEnabled="false"
ListenPort="7771" LogRemoteExceptionsEnabled="true"
LoginTimeout="1000" Machine="MyMachine" Name="Server2"
NativeIOEnabled="true" ReverseDNSAllowed="false"
ServerVersion="7.0.2.0" StdoutDebugEnabled="true"
StdoutEnabled="true" StdoutSeverityLevel="32"
SystemPassword="{3DES}2LwBLCayHcc="
ThreadPoolPercentSocketReaders="99" TunnelingClientPingSecs="45"
TunnelingClientTimeoutSecs="40" TunnelingEnabled="false"
WorkspaceShowUserKeysOnly="false"
XMLEntityCache="XMLCacheMBean_Server2" XMLRegistry="company XMLRegistry">
<COM Name="Server2"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<IIOP Name="Server2"/>
<JTAMigratableTarget Cluster="myCluster" Name="Server2" UserPreferredSer
ver="Server2"/>
<JTARecoveryService Name="Server2"/>
<KernelDebug Name="Server2"/>
<Log FileMinSize="4096" FileName="Server2\company.log"
FileTimeSpan="24" Name="Server2"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL ListenPort="7772" Name="Server2"/>
<ServerDebug Name="Server2"/>
<ServerStart Name="Server2"/>
<WebServer DefaultWebApp="go" LogFileName="Server2\access.log"
LoggingEnabled="true" Name="Server2" Targets="Server2"/>
</Server>
<ShutdownClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="200" Name="companyShutdown2" Targets="Server2"/>
<ShutdownClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="175" Name="TaskManagerShutdown" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.ContextHandler"
DeploymentOrder="105" FailureIsFatal="true"
Name="ContextHandlerStartup1" Targets="Server2"/>
<StartupClass ClassName="company.appserver.weblogic.companyStartup"
DeploymentOrder="100" FailureIsFatal="true"
Name="companyStartup1" Targets="Server2,Server2"/>
<StartupClass
ClassName="company.appserver.weblogic.WLTaskManagerInit"
DeploymentOrder="125" FailureIsFatal="true"
Name="TaskManagerStartup" Targets="Server2"/>
<XMLEntityCache Name="XMLCacheMBean"/>
<XMLEntityCache Name="XMLCacheMBean_Server2"/>
<XMLRegistry
DocumentBuilderFactory="org.apache.xerces.jaxp.DocumentBuilderFactoryImp
l"
Name="company XMLRegistry"
SAXParserFactory="org.apache.xerces.jaxp.SAXParserFactoryImpl" Transform
erFactory="org.apache.xalan.processor.TransformerFactoryImpl"/>
</Domain>
I start the admin server first followed by one of the managed servers. The admin server
starts fine. When I start the managed server 1, it is not deploying the application on the
managed server and I am getting the following exception on the managed server.
Setting custom initial context factory<Nov 25, 2004 11:54:44 PM CET> <Notice> <Management> <141053> <Application Polle
r not started for production server.>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <Management> <141030> <Starting discover
y of Managed Server... This feature is on by default, you may turn this off by p
assing -Dweblogic.management.discover=false>
<Nov 25, 2004 11:54:45 PM CET> <Notice> <WebLogicServer> <000354> <Thread "Liste
nThread.Default" listening on port 7770>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.x and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:06 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server2 on listen address x.x.x.223 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <RJVM> <000519> <Unable to connect to a
remote server on address x.x.x.222 and port 7771 with protocol t3. The Exce
ption is java.net.ConnectException: Connection refused: connect>
<Nov 25, 2004 11:55:08 PM CET> <Warning> <Management> <141028> <Unable to locate
Managed server Server1 on listen address x.x.x.222 listen port 7771. Ignore
this message if the Managed server was shutdown intentionally. The Managed serv
er will connect to the Admin server when it is re-started.>
<Nov 25, 2004 11:55:08 PM CET> <Notice> <WebLogicServer> <000329> <Started WebLo
gic Admin Server "myserver" for domain "company" running in Production Mode>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000365> <Server state
changed to RUNNING>
<Nov 25, 2004 11:55:09 PM CET> <Notice> <WebLogicServer> <000360> <Server starte
d in RUNNING mode>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server1,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server1,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
<Nov 25, 2004 11:56:57 PM CET> <Warning> <rmi> <080005> <Exception thrown by rmi
server: weblogic.management.internal.AdminMBeanHomeImpl.getMBean(Ljava.lang.Str
ing;Ljava.lang.String;)
javax.management.InstanceNotFoundException: company:Name=Server2,Type=Migratable
Target
javax.management.InstanceNotFoundException: company:Name=Server2,Type=MigratableT
arget
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:144)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.jav
a:268)
at weblogic.management.internal.AdminMBeanHomeImpl.getMBean(AdminMBeanHo
meImpl.java:288)
at weblogic.management.internal.AdminMBeanHomeImpl_WLSkel.invoke(Unknown
Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:821)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:308)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest
.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
Can somebody help me find out why this problem is occuring..? -
Clustering Problem on WLS 5.1 sp 2/3
I've set up a multihomed machine running four instances of WLS 5.1 sp2 on
solaris 7. When I initially added them to a cluster and tested them for
serving JSPs everything seemed fine. I've since tried deploying an EJB
(which works in a non clustered server) and I'm suddenly getting the
following errors:
stdout:
... <E> <MutlicastSocket> Multicast socket receive error:
java.lang.runtimeException: I/O error opening JAR file from
file:/export/home0/weblogic/cluster1/serverclasses
stderr:
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.open(Compiled Code)
at java.util.zip.ZipFile.<init>(Compiled Code)
at java.util.zip.ZipFile.<init>(Compiled Code)
at
weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java:74)
at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(Comp
iled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compiled
Code)
at weblogic.cluster.Announcement.readObject(Announcement.java:73)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(Comp
iled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compiled Code)
at weblogic.cluster.TMSocket.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
(My EJB is deployed it its expanded directory form, which worked in a single
server, this error happens repeatedly, regardless of accessing the EJB. The
weblogic log says that the EJB deployed successfully)
I've also tried upgrading to sp3, now it cannot even serve jsps, I get the
following error:
Wed Jun 14 10:36:06 GMT+01:00 2000:<I> <ServletContext-General> file: init
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: init
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
verbose initialized to: true
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
packagePrefix initialized to: jsp_servlet
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
compileCommand initialized to: /usr/java1.2/bin/javac
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
srcCompiler initialized to weblogic.jspc
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
superclass initialized to null
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
workingDir initialized to: /export/home0/weblogic/cluster1/classfiles
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp: param
pageCheckSeconds initialized to: 1
Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
initialization complete
Wed Jun 14 10:36:24 GMT+01:00 2000:<E> <ServletContext-General> Servlet
failed with Exception
java.lang.NullPointerException
at
weblogic.servlet.internal.session.ReplicatedSession.setMaxInactiveInterval(R
eplicatedSession.java:339)
at
weblogic.servlet.internal.session.SessionContext.getNewSessionInstance(Sessi
onContext.java:322)
at
weblogic.servlet.internal.ServletRequestImpl.getNewSession(ServletRequestImp
l.java:1104)
at
weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.j
ava:1007)
at
weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.j
ava:981)
at
weblogic.servlet.jsp.PageContextImpl.initialize(PageContextImpl.java:47)
at
weblogic.servlet.jsp.PageContextImpl.<init>(PageContextImpl.java:64)
at
weblogic.servlet.jsp.JspFactoryImpl.getPageContext(JspFactoryImpl.java:31)
at jsp_servlet.simpleSession._jspService(simpleSession.java:64)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:123)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:141)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java:744)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java:692)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java:251)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
Thanks in advance, tell me if you need more info
Loz (ECsoft/MyNet)
I got that working. Never mind.
Amit Bhutra <[email protected]> wrote in message
news:[email protected]...
> I am getting same error. How did you resolved it?
> Weblogic creates a jar file in mycluster/tmp_deployment directory.
>
> Do i need to include this jar file in my weblogic.properties?
>
> Loz <[email protected]> wrote in message
> news:[email protected]...
> > OK, I got rid of the EJB problem by deploying as a jar, how about the
sp3
> > problem?
> >
> > Loz
> >
> > "Loz" <[email protected]> wrote in message
> > news:[email protected]...
> > > I've set up a multihomed machine running four instances of WLS 5.1 sp2
> on
> > > solaris 7. When I initially added them to a cluster and tested them
for
> > > serving JSPs everything seemed fine. I've since tried deploying an EJB
> > > (which works in a non clustered server) and I'm suddenly getting the
> > > following errors:
> > >
> > > stdout:
> > > ... <E> <MutlicastSocket> Multicast socket receive error:
> > > java.lang.runtimeException: I/O error opening JAR file from
> > > file:/export/home0/weblogic/cluster1/serverclasses
> > >
> > > stderr:
> > > java.util.zip.ZipException: error in opening zip file
> > > at java.util.zip.ZipFile.open(Native Method)
> > > at java.util.zip.ZipFile.open(Compiled Code)
> > > at java.util.zip.ZipFile.<init>(Compiled Code)
> > > at java.util.zip.ZipFile.<init>(Compiled Code)
> > > at
> > > weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
> > > at
> > >
> >
>
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
> > > .java:74)
> > > at weblogic.cluster.AnnotatedServiceOffer.readObject(Compiled
> > Code)
> > > at
> > >
> >
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(Comp
> > > iled Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compiled
> > Code)
> > > at
> > >
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compiled
> > > Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compiled
> > Code)
> > > at
> > >
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(Compiled
> > > Code)
> > > at
> weblogic.cluster.Announcement.readObject(Announcement.java:73)
> > > at
> > >
> >
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(Comp
> > > iled Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readLeftover(Compiled
> > Code)
> > > at
> > >
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(Compiled
> > > Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readObject(Compiled
> Code)
> > > at
> > > weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(Compiled
> > Code)
> > > at weblogic.cluster.TMSocket.execute(Compiled Code)
> > > at weblogic.kernel.ExecuteThread.run(Compiled Code)
> > >
> > > (My EJB is deployed it its expanded directory form, which worked in a
> > single
> > > server, this error happens repeatedly, regardless of accessing the
EJB.
> > The
> > > weblogic log says that the EJB deployed successfully)
> > >
> > > I've also tried upgrading to sp3, now it cannot even serve jsps, I get
> the
> > > following error:
> > >
> > > Wed Jun 14 10:36:06 GMT+01:00 2000:<I> <ServletContext-General> file:
> init
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > init
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > verbose initialized to: true
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > packagePrefix initialized to: jsp_servlet
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > compileCommand initialized to: /usr/java1.2/bin/javac
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > srcCompiler initialized to weblogic.jspc
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > superclass initialized to null
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > workingDir initialized to: /export/home0/weblogic/cluster1/classfiles
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > param
> > > pageCheckSeconds initialized to: 1
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<I> <ServletContext-General> *.jsp:
> > > initialization complete
> > > Wed Jun 14 10:36:24 GMT+01:00 2000:<E> <ServletContext-General>
Servlet
> > > failed with Exception
> > > java.lang.NullPointerException
> > > at
> > >
> >
>
weblogic.servlet.internal.session.ReplicatedSession.setMaxInactiveInterval(R
> > > eplicatedSession.java:339)
> > > at
> > >
> >
>
weblogic.servlet.internal.session.SessionContext.getNewSessionInstance(Sessi
> > > onContext.java:322)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletRequestImpl.getNewSession(ServletRequestImp
> > > l.java:1104)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.j
> > > ava:1007)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletRequestImpl.getSession(ServletRequestImpl.j
> > > ava:981)
> > > at
> > >
weblogic.servlet.jsp.PageContextImpl.initialize(PageContextImpl.java:47)
> > > at
> > > weblogic.servlet.jsp.PageContextImpl.<init>(PageContextImpl.java:64)
> > > at
> > >
> weblogic.servlet.jsp.JspFactoryImpl.getPageContext(JspFactoryImpl.java:31)
> > > at
jsp_servlet.simpleSession._jspService(simpleSession.java:64)
> > > at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> > > :123)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
> > > :141)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> > > l.java:744)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
> > > l.java:692)
> > > at
> > >
> >
>
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
> > > Manager.java:251)
> > > at
> > >
> >
>
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:363)
> > > at
> > > weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:263)
> > > at weblogic.kernel.ExecuteThread.run(Compiled Code)
> > >
> > > Thanks in advance, tell me if you need more info
> > >
> > > Loz (ECsoft/MyNet)
> > >
> > >
> >
> >
>
>
-
No Lock & Edit button in WLS 10 Console
I don't have the Lock & Edit button in the WLS 10 Console. I know that this could be turned on and off in previous versions of WebLogic in the config.xml file, but I didn't find this anywhere in the documentation anymore.
Can anybody tell me how to make the Lock & Edit buton visible again in WebLogic 10.3a?
Thanx
PeterHere is my config.xml ( I guess I cannot just attach it):
<?xml version='1.0' encoding='UTF-8'?>
<domain xsi:schemaLocation="http://www.bea.com/ns/weblogic/920/domain.xsd" xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xmlns:xacml="http://www.bea.com/ns/weblogic/90/security/xacml">
<name>IOP5</name>
<domain-version>10.3.0.0</domain-version>
<security-configuration>
<name>IOP5</name>
<realm>
<!--
IA(X509)
CSPrincipal
B1
Test
ATN(LDAP)
[RealmAdapter]
InternalIA
-->
<sec:auditor xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-auditorType">
<sec:name>CSRealmCSAuditor</sec:name>
<prov:audit-logger-name>@audit.WLSAuditChannel</prov:audit-logger-name>
<prov:use-wls-log-handler>false</prov:use-wls-log-handler>
<prov:providers-logs-enabled>false</prov:providers-logs-enabled>
</sec:auditor>
<sec:authentication-provider xsi:type="wls:saml-identity-asserter-v2Type">
<sec:name>SAMLIdentityAsserter</sec:name>
<wls:name-mapper-class-name>com.csg.cs.security.wls.authentication.saml.SAMLNameMapperImpl</wls:name-mapper-class-name>
</sec:authentication-provider>
<sec:authentication-provider xsi:type="prov:cssaml-authenticatorType" xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xmlns:dom="http://www.bea.com/ns/WebLogic/920/domain" xmlns:xsi1="xsi">
<sec:name>CS SAML Authenticator</sec:name>
<sec:control-flag>OPTIONAL</sec:control-flag>
</sec:authentication-provider>
<!-- IBIP Configuration start -->
<!-- IBIP Configuration end -->
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-identity-asserterType">
<sec:name>CS Identity Asserter</sec:name>
<prov:credentials-validators>X.509=com.csg.cs.security.wls.authentication.pki.ext.CSPKICredentialValidator</prov:credentials-validators>
</sec:authentication-provider>
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-principal-authenticatorType">
<sec:name>CS Principal Authenticator</sec:name>
<sec:control-flag>OPTIONAL</sec:control-flag>
<prov:credential-validator>com.csg.cs.security.wls.authentication.pki.ext.CSPrincipalCredentialValidator</prov:credential-validator>
</sec:authentication-provider>
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:csb1-authenticatorType">
<sec:name>CS B1 Authenticator</sec:name>
<sec:control-flag>OPTIONAL</sec:control-flag>
<!-- @B1_KEYSTORE -->
</sec:authentication-provider>
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-authenticatorType">
<sec:name>CS Authentication Provider</sec:name>
<sec:control-flag>SUFFICIENT</sec:control-flag>
<prov:log-in-module-class-name>com.csg.cs.security.wls.authentication.ldap.LDAPAtnLoginModuleImpl</prov:log-in-module-class-name>
<prov:assertion-module-class-name>com.csg.cs.security.wls.authentication.ldap.LDAPAtnLoginModuleImpl</prov:assertion-module-class-name>
</sec:authentication-provider>
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-internal-identity-asserterType">
<sec:name>CS Internal Identity Asserter</sec:name>
</sec:authentication-provider>
<sec:authentication-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-data-layer-providerType">
<sec:name>CS Data Layer Security Provider</sec:name>
<sec:control-flag>OPTIONAL</sec:control-flag>
<prov:key-alias>SYSTEM</prov:key-alias>
<prov:key-store-pass-phrase-encrypted>{3DES}aqglyJbnET5qUuwQ1cujHw==</prov:key-store-pass-phrase-encrypted>
<prov:key-pass-phrase-encrypted>{3DES}aqglyJbnET5qUuwQ1cujHw==</prov:key-pass-phrase-encrypted>
</sec:authentication-provider>
<sec:role-mapper xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-role-mapperType">
<sec:name>CS Role Mapper</sec:name>
<sec:role-deployment-enabled>true</sec:role-deployment-enabled>
<prov:is-debug>false</prov:is-debug>
<prov:application-role-mapper-class-name></prov:application-role-mapper-class-name>
</sec:role-mapper>
<sec:authorizer xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-authorizerType">
<sec:name>CS Authorization Provider</sec:name>
</sec:authorizer>
<sec:credential-mapper xsi:type="sam:saml2-credential-mapperType" xmlns:sam="http://www.bea.com/ns/weblogic/90/security/saml2">
<sec:name>SAML2CredentialMapper</sec:name>
<sam:issuer-uri>http://www.credit-suisse.com</sam:issuer-uri>
<sam:name-qualifier>CS_SWISS_TEST_PROTECTIONDOMAIN</sam:name-qualifier>
<sam:name-mapper-class-name>com.csg.cs.security.wls.authentication.saml.SAML2NameMapperImpl</sam:name-mapper-class-name>
</sec:credential-mapper>
<sec:credential-mapper xsi:type="wls:saml-credential-mapper-v2Type" xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers">
<sec:name>SAMLCredentialMapper</sec:name>
<wls:issuer-uri>http://www.credit-suisse.com</wls:issuer-uri>
<wls:name-qualifier>CS_SWISS_TEST_PROTECTIONDOMAIN</wls:name-qualifier>
<wls:name-mapper-class-name>com.csg.cs.security.wls.authentication.saml.SAMLNameMapperImpl</wls:name-mapper-class-name>
</sec:credential-mapper>
<sec:credential-mapper xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cs-credential-mapperType">
<sec:name>CSCredentialMapper</sec:name>
</sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-provider xmlns:prov="http://www.credit-suisse.com/ns/wls10/security/providers" xsi:type="prov:cert-path-providerType">
<sec:name>CS Certificate Path Provider</sec:name>
<prov:cert-path-validator-class-name>com.csg.cs.security.wls.authentication.cert.ext.CSPKICertPathValidator</prov:cert-path-validator-class-name>
</sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:deploy-role-ignored>true</sec:deploy-role-ignored>
<sec:deploy-policy-ignored>true</sec:deploy-policy-ignored>
<sec:deploy-credential-mapping-ignored>false</sec:deploy-credential-mapping-ignored>
<sec:fully-delegate-authorization>true</sec:fully-delegate-authorization>
<sec:security-dd-model>Advanced</sec:security-dd-model>
<sec:name>CSRealm</sec:name>
<sec:delegate-m-bean-authorization>true</sec:delegate-m-bean-authorization>
</realm>
<default-realm>CSRealm</default-realm>
<anonymous-admin-lookup-enabled>true</anonymous-admin-lookup-enabled>
<credential-encrypted>{3DES}Zk0PFQd/y2JbBwcVCkoTVA==</credential-encrypted>
<connection-filter>com.csg.cs.security.wls.net.ConnectionFilterImpl</connection-filter>
<connection-logger-enabled>true</connection-logger-enabled>
</security-configuration>
<server>
<name>IOPWLS5</name>
<reverse-dns-allowed>true</reverse-dns-allowed>
<ssl>
<use-java>true</use-java>
<enabled>true</enabled>
<!-- JAP00002101 -->
<ciphersuite>TLS_RSA_WITH_RC4_128_SHA</ciphersuite>
<ciphersuite>TLS_RSA_WITH_3DES_EDE_CBC_SHA</ciphersuite>
<cert-authenticator></cert-authenticator>
<hostname-verifier>com.csg.cs.security.wls.net.SSL.ext.CSPKIHostNameVerifier</hostname-verifier>
<hostname-verification-ignored>false</hostname-verification-ignored>
<export-key-lifespan>500</export-key-lifespan>
<client-certificate-enforced>false</client-certificate-enforced>
<listen-port>7002</listen-port>
<two-way-ssl-enabled>true</two-way-ssl-enabled>
<server-private-key-alias>tipd.csintra.net</server-private-key-alias>
<server-private-key-pass-phrase-encrypted>{3DES}mQrgg0qTDHAhuU+2FACgZQ==</server-private-key-pass-phrase-encrypted>
<ssl-rejection-logging-enabled>true</ssl-rejection-logging-enabled>
<inbound-certificate-validation>BuiltinSSLValidationAndCertPathValidators</inbound-certificate-validation>
<outbound-certificate-validation>BuiltinSSLValidationOnly</outbound-certificate-validation>
</ssl>
<log>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Notice</logger-severity>
<stdout-severity>Notice</stdout-severity>
<log-file-filter xsi:nil="true" />
<stdout-filter xsi:nil="true" />
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<domain-log-broadcast-filter xsi:nil="true" />
<memory-buffer-filter xsi:nil="true" />
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
<redirect-stderr-to-server-log-enabled>true</redirect-stderr-to-server-log-enabled>
</log>
<machine xsi:nil="true"></machine>
<listen-port>7001</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<cluster xsi:nil="true"></cluster>
<web-server>
<!-- Portal Configuration start -->
<!-- Portal Configuration end -->
<send-server-header-enabled>false</send-server-header-enabled>
</web-server>
<iiop-enabled>false</iiop-enabled>
<listen-address>127.0.0.1</listen-address>
<staging-directory-name>./stage</staging-directory-name>
<classpath-servlet-disabled>true</classpath-servlet-disabled>
<key-stores>CustomIdentityAndCommandLineTrust</key-stores>
<custom-identity-key-store-file-name>./keystores/identity.properties</custom-identity-key-store-file-name>
<custom-identity-key-store-type>CS_PKI</custom-identity-key-store-type>
<custom-identity-key-store-pass-phrase-encrypted>{3DES}DbuNFX1jQ5s=</custom-identity-key-store-pass-phrase-encrypted>
<custom-trust-key-store-file-name>./keystores/trustedca.properties</custom-trust-key-store-file-name>
<custom-trust-key-store-type>CS_PKI</custom-trust-key-store-type>
<custom-trust-key-store-pass-phrase-encrypted>{3DES}DbuNFX1jQ5s=</custom-trust-key-store-pass-phrase-encrypted>
</server>
<embedded-ldap>
<name>IOP5</name>
<credential-encrypted>{3DES}nQpvTCkYlf4h4+8bAEI7JH8pg2Zo4uqNrVEu9bfYSr8=</credential-encrypted>
</embedded-ldap>
<administration-port-enabled>true</administration-port-enabled>
<administration-port>9999</administration-port>
<configuration-version>10.3.0.0</configuration-version>
<app-deployment>
<name>IOPA_root</name>
<target>IOPWLS5</target>
<source-path>C:\Apps\Tip50/cs/appsrv/app/IOP5/IOPA/root.ear</source-path>
<!-- if a deployment plan is available ... -->
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>IOPD_prsysmgmt</name>
<target>IOPWLS5</target>
<source-path>C:\Apps\Tip50/cs/appsrv/app/IOP5/IOPD/prsysmgmt.ear</source-path>
<!-- if a deployment plan is available ... -->
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>IOPC_prhelp</name>
<target>IOPWLS5</target>
<source-path>C:\Apps\Tip50/cs/appsrv/app/IOP5/IOPC/prhelp.ear</source-path>
<!-- if a deployment plan is available ... -->
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>IOPA_prpc_j2ee14</name>
<target>IOPWLS5</target>
<source-path>C:\Apps\Tip50/cs/appsrv/app/IOP5/IOPA/prpc_j2ee14.ear</source-path>
<!-- if a deployment plan is available ... -->
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<app-deployment>
<name>IOPB_prdbutil</name>
<target>IOPWLS5</target>
<source-path>C:\Apps\Tip50/cs/appsrv/app/IOP5/IOPB/prdbutil.ear</source-path>
<!-- if a deployment plan is available ... -->
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</app-deployment>
<!-- UNPT 1.0 Library for IBIP WebService Support start -->
<!-- UNPT 1.0 Library for IBIP for WebService Support end -->
<!-- SAML 1.0 and SAML 2.0 Libraries for WebService Support start -->
<library>
<name>CSWSPolicySAML11#[email protected]</name>
<target>IOPWLS5</target>
<source-path>C:\cs\appsrv\bin\wl10.3a\wlfw\lib\WSS11SAML1WSPolicy.jar</source-path>
<deployment-order>1</deployment-order>
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
<library>
<name>CSWSPolicySAML20#[email protected]</name>
<target>IOPWLS5</target>
<source-path>C:\cs\appsrv\bin\wl10.3a\wlfw\lib\SAML2WSPolicy.jar</source-path>
<deployment-order>1</deployment-order>
<security-dd-model>Advanced</security-dd-model>
<staging-mode>nostage</staging-mode>
</library>
<!-- SAML 1.0 and SAML 2.0 Libraries for WebService Support end -->
<!-- external Libraries e.g. Portal Support start -->
<!-- external Libraries e.g. Portal Support end -->
<!-- internal shared Libraries start -->
<!-- internal shared Libraries end -->
<!-- Portal Configuration start -->
<!-- >>> TRACE >>> portalType=$portalType -->
<jms-server>
<name>PRJMS_Server</name>
<target>IOPWLS5</target>
</jms-server>
<jmx>
<management-ejb-enabled>false</management-ejb-enabled>
</jmx>
<shutdown-class>
<name>CSServerLifeCycleShutdown</name>
<target>IOPWLS5</target>
<class-name>com.csg.cs.security.wls.CSServerLifeCycleShutdown</class-name>
</shutdown-class>
<startup-class>
<name>CSServerLifeCycle</name>
<target>IOPWLS5</target>
<class-name>com.csg.cs.security.wls.CSServerLifeCycle</class-name>
<failure-is-fatal>true</failure-is-fatal>
<load-before-app-deployments>true</load-before-app-deployments>
<load-before-app-activation>false</load-before-app-activation>
</startup-class>
<!-- Portal Configuration end -->
<jms-system-resource>
<name>PRJMS_Module</name>
<target>IOPWLS5</target>
<sub-deployment>
<name>PRJMS_Subdeployment</name>
<target>PRJMS_Server</target>
</sub-deployment>
<sub-deployment>
<name>PRJMS_Subdeployment_Topic</name>
<target>PRJMS_Server</target>
</sub-deployment>
<descriptor-file-name>jms/prjms_module-jms.xml</descriptor-file-name>
</jms-system-resource>
<admin-server-name>IOPWLS5</admin-server-name>
<jdbc-system-resource>
<name>pega-rules</name>
<target>IOPWLS5</target>
<descriptor-file-name>jdbc/pega-rules-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
<!-- Portal Configuration start -->
<!-- >>> TRACE >>> portalType=$portalType -->
<!-- Portal Configuration end -->
<webservice-security>
<name>default_wss</name>
<webservice-token-handler>
<name>CSTokenHandler</name>
<class-name>com.csg.cs.security.wls.authentication.wsee.TokenHandler</class-name>
<token-type>ut</token-type>
<handling-order>0</handling-order>
</webservice-token-handler>
</webservice-security>
</domain>
Regards
Peter
Maybe you are looking for
-
Won't shutdown or restart unless hard boot - SMCFanControl Application
I have quite a bit of installed hardware so I thought SMCFanControl would be a good idea. However, it seems that I can reproduce a problem I'm having when utilizing the SMC app. Problem: 1. Won't shutdown or restart unless a power boot is performed 2
-
Todo tab: Routes displayed when selecting the List View
Hi, I have a question about the routes that appear on the workspace's "To do" list view, and how to perform validations when they are clicked. I've created a process that starts with a form being created by a user. Then, it's validated by a sequen
-
IN HR REPORT I HAVE TO USE STANDARD SELECTION SCREEN THIS WIIL GET WHEN I USE LOGICAL DATABASE. BUT I NEED ONE MORE SELECTION PARAMETER WHICH HAS PULL DOWN MENU . CAN ANY BODY PLS LET ME KNOW HOW TO GET PULL DOWN MENU IN SELECTION SCREEN
-
Grainy when elements converts raw to psd file in editor.
Hello, Im having trouble with elements 11. I bring a file in from lightroom and convert it to pds (though i have tried tiff too). Whenever i get it into elements editor, its REALLY grainy and not sharp at all. The image on the left (is in editor)
-
Can't do a complete clean install (defective hard drive?)
Hello I picked up a used G4 Quicksilver 733 mhz. I knew that I would need a retail OS 9.2 bootable install disc, to do a fresh install, so I picked one up. But it appeared as though the prior owner did not do a proper erase of the old hard drive, bec