Pause between FLVs loading

I'm loading 26 one sec FLVs (letters of the alphabet)
dynamically by using EventListener, "complete". There is about a
one second delay between clips. This is running locally so there is
no downloading and even clips which are used more than once (I am
spelling sentances) take this long.
Any ideas?
Thanks

No, there isn't a way to do that.
-Wei Zhang
Senior Computer Scientist
Adobe Systems, Inc.
[email protected]

Similar Messages

Why does my Apple TV pause frequently to load?

WHy does my Apple TV pause frequently to load?

load what? there is a world of difference between if it's playing a movie from your LAN networks shared itunes lib located on a harddisk close to you
compared to transfering data from youtube or netflix or itunes store or...

Multiple FLVs loaded properly

Ok,
On my main timeline i have some buttons. When you click a button you are diverted to the a frame label on the main timeline.
When the timeline stops at say frame 2 an flv is loaded into an empty movie clip on the main stage. If you click on button 2, same thing. So in total I have about four FLV's that play when a button is pushed. If i keep clicking my buttons to test the smoothness of my flv's, after about three clicks from navigating between my frames/loaded flvs, my entire main movie becomes slower.
Each FLV is about 5mb.
Below is the code that gets initated when I click my button and am taken to that frame. My question is this, if i'm jumping between FLV's at every button click is the FLV that played first still playing and causing the entire main movie to slow down? Is there a better way to manage this? Do I have to unload the movie being played when i click? I'm trying to see if there an more efficient way to have smooth streaming from my flv. The flv that is getting initated is simply looping when it's done and servers a 'moving background'.
is there something else i can implement into my code that will keep my loaded flv's playing smoothly? Thanks,
this is the code on the main timeline that loads my external swf that will load the FLV
var myLoader:Loader = new Loader();
addChild(myLoader);
var url:URLRequest = new URLRequest("theexternal.swf");
myLoader.load(url);
This is the code that resides in the external SWF that will initiate the FLV.
import fl.video.*;
function onFLVComplete(event:VideoEvent):void {
event.target.play();
swl.addEventListener(VideoEvent.COMPLETE, onFLVComplete);

ok,
so you are saying that the "unloadAndStop() is a Loader method" should be placed on the main timeline where my button is pointed to instead of inside the button?
example.
my button that points to frame 2 of the main timeline will also load the flv. Frame 2 in my main timeline simply has a stop(); action
How does the code look if i want to unload the physical movie that i created called 'night_mov'

AS3, 33rd FLV loaded loses sound: with solution

Loading FLVs into an flvplayback component, the 33rd FLV
loaded is silent, and no FLVs loaded after this will have sound.
I had assumed that as the instance was leaving the stage and
it's parents etc were being deleted, and there were no persistent
references to the content, the player would deal with garbage
collection.
It seems this is not the case.
I don't know why the 33rd is the one to fail, but I guess 32
might be the maximum number that work?
So, if loading multiple FLVs into your movie, remember to
manually close the FLVs once they are finished, before loading the
next one.
I used
myFlvPlayback.getChildAt(0).close();
you could also use
currentVideoPlayerIndex =
myFlvPlayback.activeVideoPlayerIndex;
myFlvPlayback.closeVideoPlayer(currentVideoPlayerIndex);
but I found that this errors when you have only loaded one
video, as you can't closeVideoPlayer where the current index is 0.
I can't find anywhere in the documentation that states that
you can only load a maximum of 32 videos into the player, perhaps
it's a sound channel limitation? It would have been helpful for
there to be a note of it in the help files!
Maybe I should have known to manually clean up anyway, but
hopefully this will save a few people a few hours of head
bashing.

Good question!
They are all being loaded into a single component. However,
the component is in a MC being attached dynamically using "new
VideoPanelClass()" (the name of my specific class for the MC that
includes the FLVPlayback), and is being removed from the stage in
between loadings - not just for a split second but for significant
lengths of time. I had imagined it would count as a new component
each time, but it seems this is not the case, despite it tracing as
a new instantiation of the parent MC each time.

Continuous play between songs without a pause between tracks

I have a lot of "mixed" cds which I have uploaded into my ipod. The cd's feature many songs mixed together into one continuous flow. Each track is marked (1-?) so you may select a specific song instead of their only being one long track. The problem is that when uploaded into my itunes (and ipod), when the cd is played, there is a pause between the tracks (like on normal cds) which obviously breaks the flow of the music. Is there any way around this?

One other option that I've begun using to separate tracks in a cd with songs that flow from one to the next (Dream Theater anyone?) yet retain the artists vision is to use Apple's Chapter Tool and use this in conjunction with a tool like Scriptbuilder's . "Podcastenhancer". (There are other utilities but this is the one I personally use.)
What this does is allow you to rip the cd with all tracks joined and then add "Chapters" to the file to indicate where each track should start. Created for use in building podcasts (like the iTunes New Music Tuesday podcast) where you want the content broken up, the combination of these tools will help you separate your songs and add album artwork at the same time. What you end up with is one long continuous song file with the ability to jump from track to track on your iPod and select the appropriate "song" in iTunes from the chapter list that appears when the file is played.
iMac 800 Mhz G4/iPod Photo 40GB Mac OS X (10.4.4) http://www.itunesregistry.com/user/user/Jamvan

Why is the ipod insisting on pausing between tracks?

My ipod 30g is pausing between tracks and there is no apparent way of altering that. This is a serious unresolved problem with the ipod which I feel needs to be discussed until Apple either recalls it or resolves the issue.
I did a search for this topic and I found that the few discussions that existed did not get the airing they deserved before they were archived.
If I didn't know Apple better I would think this is a cover-up. I called tech support and after I assured them that the itunes cd preference was set to no pause they had no answer but to re-install the software which would involve erasing all my content. And you know I got the "I haven't heard of this problem yet.." cliche tech response to de-emphasize a gaping disfunction.
Yes I'm keeping my ipod but they should not have released it for market with this audio anomaly. And yes I will merge all my tracks in itunes because that pause can ruin and entire CD if there is continuous sound.
Does anyone know if Apple is at least considering rectifying this flaw?

The iPod has never supported gapless playback.
You can suggest Apple add this feature here;
http://www.apple.com/feedback/ipod.html
It's no big conspiracy - we're not alowed to speculate here about what features Apple may or may not add in the future, so there really isn't much to talk about.

Pause between inro and menu

Hi!
I have made an intro to my menu (animating the menu in).
But there is a little thing that is enoying. The pause between the intro and the menu that happends when the dvd are played on a dvd player.
I have heard about something that is called VTS (Video Title Set)
My question is: Is this possible to configurate is Encore dvd 2??
(excuse my bad english. I did not have a dictionary right now ;-) )
About VTS (from the Apple dvd studio por manual):
VTS Editor
The VTS Editor allows you to verify and control the VTS (Video Title Set) structure of your project. Using the VTS Editor, you are able to manually assign elements to VTS blocks. This makes it possible for you to optimize the final DVDs layout so that when its played there are minimum pauses due to the player having to move between elements in different parts of the disc.
When you play a DVD and a jump must occur, such as when a menu button is selected that jumps to a tracks chapter marker, there is a slight pause while the DVD players laser locates where to jump to on the disc.
- If the track is in a different VTS block than the menu, the laser must first jump to the video manager files, and from there on to the tracks VTS.
- If the track is in the same VTS block as the menu, the laser is able to go directly to the track.
You can improve a discs playback performance by keeping related elements together whenever possible. For example, you should place the scripts used with a specific track in the same VTS as the track.
Since menus often link to multiple tracks or slideshows, you will not be able to keep them together with everything they can jump to. However, you can minimize the time a DVD player spends jumping from the menu to the video manager files by keeping the menus in the first VTS, which is physically located close to the video manager files.
Anders

Anders.
You cannot configure projects in quite this manner with EncoreDVD - and in all honesty, this is pure sophistry on Apple's part.
The way Encore works is to turn the timelines into VTS
i in the order in which you create the timelines in your project.
This cannot be altered later, but would make a fine feature request
http://www.adobe.com/support/feature.html
There will
i always
be a slight lag between a movie and a menu, no matter what application you author in - even Scenarist has this, as the player is jumping from a Movie into Menu Space. In Encore, you can minimize this lag by creating the intro sequence as a motion menu, and then using a transition to the main menu - this would keep both your intro and the main menu in Menu Space, and very close together indeed.
It's probably the best solution for you - much better than DVDSP, that's for sure!

How to manage wait time in between pages loading

Hi,
Could you please help me "How to manage wait time in between pages loading while playback script using etester?
Thanks,
RJ.

RJ
You can edit the think time in eTester by:
Expand the tree node and right click on the address bar to select Address Properties, you can then edit the text box called Delay Before PlayBack
If you like to specify think time between actions instead of action groups: right click on the actions ans select properties, there are 2 text boxes in the new window; one for milliseconds and the other for seconds
Hope this helps
Alex

How to get laserjet to pause between print jobs

I just reinstalled my OS (Win7) over the weekend, and the laserjet P1102w is working fine, but it is doing one thing differently than before. For as long as I can remember (even going back to an earlier laserjet 1018), I could send 2-3 print jobs to the printer. When the first was done, the printer would pause for a few seconds, and only then, start pushing out the pages of the second print job (I'd use that pause to alert me to go to the printer and scoop up all the pages of that first job).
Now, it isn't doing that.
Is there a setting to check? Honestly I'm not sure what to look for, but I didn't see anything in Windows' printer preferences.

Hi paulri,
Sorry that I had misread your post. The pausing between print jobs, was most likely a function of a communication lag between the printer and the computer, and not a feature of the printer or the software. This option is not available with the Operating Systems print spooler.
As a workaround, I would just print one document at a time, and wait for it to finish printing, before printing the next document.
For future reference, just in case you may need it, here is your printer's user guide.
Thank you for posting, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Pausing between chapters in DVD Pro

I would like to have my finished DVD pause automatically pause between chapters, then resume when I press play on the controller. Simple concept. Can I set that up in DVD Pro or is it done in FCP? Thanks

I set chapter markers at the beginning of each section. There are 5 sections with a transition between each one. I put the chapter marker in the center of each transition where the image was black.
To create a pause in DVD Pro I selected a chapter marker which activated the navigation menu where I could select Playback Options. Under Playback Options I selected 'Pause after each VOBU'.
That didn't seem to work at first until I selected 'Wait: Infinite'.
It worked perfectly in my Simulator. I was thrilled. I burned the DVD without making any other changes and then had the problems on the finished DVD. Should I save the project or something before burning? That's where I am. thanks for your time!
Les

Pauses between tracks? (Brutal 1 or 2 second interruption between tracks)

I would like to know if there is a way to program the iPod so that when I’m listening to an album that is supposed to be heard in continuous playback (no pauses between tracks, like in operas, some new age albums and classical music) I can hear it without the brutal one or two second interruption the internal software inserts between tracks.
Here’s what I have tried. I went to iTunes preferences, in PLAYBACK, and set the CROSSFADE PLAYBACK indicator to ZERO (0) seconds. Then, I updated the iPod. There remains a very noticeable skip between tracks that isn’t there on the original CDs. It is a little better, but still too noticeable.
What I mean is this. When I listen to my CD on my computer or sound system, there is absolutely no gap or skip between tracks…the music just flows on (example : Alexander by Vangelis, or a Wagner opera). The music is continuous. No skip between tracks.
Should I conclude there is no way to import this type of recording on the iPod (and iTunes) without adding a skip (even if only a short one) between tracks?
I have a 40 Gigabytes iPod, version 3.1 of the iPod software.
Thanks
Charles
PowerPC G4, 733 MHz Mac OS X (10.4.3)

This question is one that crops up a lot on these forums and has been a major source of complaint for as long as the iPod has been in existence.
Currently the only way to eliminate the gap between songs is to import the cd as one track. You do this by using the “join cd tracks” option in the advanced menu of iTunes.
Make sure the tracks are in their correct order, and highlight those you wish to join.
No gaps, but the downside is that you will of course lose the ability to navigate between tracks, and the song info is also lost. The iPod will display the cd title in the song field in the “now playing” screen . You’ll also have one large file instead of a number of smaller ones.
If you would like to see gapless playback implemented to the iPod, add your voice to the many here.
iPod Feedback.
The crossfade feature is an iTunes feature only just fyi.

Pause between clips after rendering

I have a sequence with several video clips. I shot this entirely with a Canon 5DMarkII so the video format is H.264 mov.
Playback in the canvas/timeline is great until I render. Once I render- either the entire sequence or just a single transition- the playback pauses/stutters between clips. The stutter happens anywhere on the timeline, not isolated to the transition. Intra-clip playback is great, just when it gets to the end of the clip, it hiccups before moving to the next one.
If I delete the render files, playback goes back to normal.
I am editing on a new macbook pro, with an external firewire800 drive as scratch disk. I originally created the project on a new iMac with the same firewire drive and never had this problem. Its just since I have moved to my laptop.
Adjusting RT settings does not seem to correct this problem. Either does moving scratch disk locally or to another drive.
Any ideas?

I'm having the same problem using the canon 5d Mark 2 with final cut... it's really odd... can't put a finger on the problem... i checked the format of the sequence, along with the video clip... they both match... even the playback in the canvas i can notice the pause... i tried exporting a little portion of it just to preview, and the playback was smoother, but still noticed the pause between cuts...
another thing i noticed was that certain clips there was no pause... could it be a frame rate issue? perhaps it's trying to fill in the frames in between... i don't know... just a guess... i would still like to know how to remedy this problem tho... so let me know your findings... i'll do the same...

EXACT DIFFERENCE BETWEEN FULL LOAD AND REPAIRFULL LOAD?

HI Champ,
Can anyone explain me the exact difference between full load and Repairfull load?Give e some senario where we can go for this?Please.....
10zin

Hi,
Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
This is normally done we when we lose some data or there is data mismatch between source system and BW.
Check the OSS Note 739863 'Repairing data in BW' for all the details
Symptom
Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
Solution
Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
1. Repair request: Definition
If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
2. Prerequisites for using the "Repair Request" function
2.1. Troubleshooting
Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
We always recommend that you load the data into the PSA table in the first step and check the result there.
2.2. Analyze the effects on the downstream targets
Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
2.3. Analysis of the selections
You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
Some applications have additional special features:
Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
3. Repair request execution
How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets."
Refer.
Repair full request
Re: Repair full request
Steps to perform repair full request
full repair request
repair full request
Re: Repair Full Request
Thanks,
JituK

How to code a button to play and pause sound using load sound?

how to code a button to play and pause sound using load sound?I have used load sound methos to attach the sound.Can anyone help me?

Hey thnx,
I have used this code on sound's button's frame.and my stop n play button is on another screen.main sound button and stop button is on diffrent screen.
Here is my code-
stop();
adaDrut1.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.loadSound("F#/Bhajni1.ark", true);
mySoundC.onSoundComplete = function() {
_root.mySoundC.start(0,999); }
         gotoAndPlay("play2");
        _global.myTaalLaya = "Low1";
adaDrut1 is a sound button.And there are lot of buttons with diffrent sound.
Thanks..

Eliminating pauses between LIVE tracks?

Hi. I listen to some music on my iPod (4G) and iPod Nano, that is either live, or music that is continuous from track to track, with no break (such as some of the later Beatles albums). Unfortunately, you get a fraction-of-a-second pause between all tracks. It's not noticeable when listening to most music, but it IS noticeable when listening to live tracks. Is there anyway to make the tracks flow smoothly together, and eliminate this pause? Thanks.
iMac G3 Mac OS X (10.3.9)

This question is one that crops up a lot on these forums and has been a major source of complaint for as long as the iPod has been in existence.
Currently the only way to eliminate the gap between songs is to import the cd as one track. You do this by using the “join cd tracks” option in the advanced menu of iTunes.
Make sure the tracks are in their correct order, and highlight those you wish to join.
No gaps, but the downside is that you will of course lose the ability to navigate between tracks, and the song info is also lost. The iPod will display the cd title in the song field in the “now playing” screen . You’ll also have one large file instead of a number of smaller ones.
Be aware also that playback of single large audio files can shorten battery playtime between charges.
If you would like to see gapless playback implemented to the iPod, add your voice to the many here.
iPod Feedback.

Pause between FLVs loading

Similar Messages

Maybe you are looking for