Pause/play buttons on black remote

Hi I've just started using btvision. I was supplied a blac remote. In the Guide Booklet, when describing the pause function it tells you to use the pause and play buttons on your remote. However ther aren't either of thes buttons on my black remote so how do I use the function? Can anybody help? Thanks, dougiecs.

dougiecs wrote:
Hi I've just started using btvision. I was supplied a blac remote. In the Guide Booklet, when describing the pause function it tells you to use the pause and play buttons on your remote. However ther aren't either of thes buttons on my black remote so how do I use the function? Can anybody help? Thanks, dougiecs.
Underneath the "back" button there is a what looks like the number 11 ...This is the pause button
to the right of the pause button is an arrow pointing to the right this is the play button
I hope..!!!

Similar Messages

Photos slideshow pause/play button not displaying in 3.0

I've been running 3.0 on my first generation Touch for several months. Throughout, I've noticed that the Photos slideshow lower-center pause/play button no longer displays once I've paused a slideshow. While the left/right arrows show and I am able to advance photos one at a time, I am unable to re-engage the slideshow.
In software versions 1 and 2, one could freely pause and play a running slideshow. Now, when I pause the slideshow, I'm forced to bail out of the slideshow and start a new one.
A longtime Touch owner, I'm not certain if my problem is a 3.0 software glitch or things have changed. Has anyone else encountered the issue?

Hi,
look here: http://discussions.apple.com/message.jspa?messageID=9843694#9843694
I hope Apple will fix this and some other Bugs in their 3.0.1 Update which will hopefully appears in a few days.

Pause/Play button on toolbar

When running a captivate slide show, and using the pause/play
button on the customisable toolbar, we have noticed that when
clicked this button does not pause any audio that may be currently
running on the slide, therefore making the facility partly
nonsensical. Is this a feature of Captivate 3.0, or is it just me
not embedding the sound in the correct place????
Please help.

Hi Kate,
My instincts tell me that you are experiencing a change in
focus, but I'll tell you what I mean, and you can decide if that
may be the problem. Assuming you are publishing to SWF/HTM output
... when your movie starts, what is actually happening is, you are
opening a HTML document, and the movie (the SWF document) is
"called" (commanded to open) by that (HTM) document. Therefore,
when it is first begun, the computer's "focus" is on the HTM, not
the SWF contained in it.
Keeping that in mind, the first time you click (an object in
the movie itself), the Windows operating system must change the
focus
from the HTM document
to the SWF movie, which accounts for the first "click". The
second time you click, the SWF document makes the correct
assumption that the "click" is meant to be interpreted as a command
intended for the object in the SWF movie.
This behavior may vary, depending on the browser being used,
and perhaps even the operating system (I'm guessing here, because I
don't know how Windows Vista might treat the action of clicking in
a browser window as opposed to the way Windows XP handles the same
command-action).
Another possible cause might be the mouse itself, or its
software. You can check this easily enough, by seeing if the
failure to function always occurs on the same machine, and if it
changes when you install a different pointing device. I know from
personal experience that sometimes I have to click really firmly,
and sometimes not. I use a battery powered optical mouse, and its
behavior is subject to change as the batteries get older.
I don't know if there is any help in my comments ... I
certainly hope so. Let us know, because sometimes when one member
"hits a wall" in offering solutions, another member "sees a light"
and a difficut problem ends up having a simple solution.
All the best,
Larry

ZVM pause/play button prob

I just got my ZVM the ither day and the day after I got it the pause/play button went dodgy. It only works when I press it really hard in the middle and doesn't make a normal clicking noise and if i press it at the side it comes up with the menu.

Sounds defecti've, is it possible to return it for a new one?

Captivate 4 - Advanced Actions - Pause/Play buttons

Hi - So I have created a 2 buttons - a pause and play - so my users can pause/play my captivate video (audio and actual slide). I have created my 2 variables for the buttons and I have created my advanced action. I'm assigning my pause to 'rdcmndPause', hide pause, show play. And I'm assigning play to 'rdcmndResume', hide play, show pause. It's not working. The pause/play buttons appear and disappear like they should - but my project isn't pausing or playing. Any thoughts?

You can create and use Widgets for Adobe Captivate 4 in AS2 as well Mike.
If you go to your Captivate Installation directory and find the "Gallery" folder and "Widgets" then you should be able to find some AS2 Widget Source files. Take a look at the "Flash Button" widget. This is a relatively simple widget and you can basically just use the code framework to make your own button widget.
If your end users have low-end systems then it's probably safer to stay with AS2 and publish towards Flash Player 8.
/Michael
Visit my Captivate blog with tips & tricks, tutorials and Widgets.

I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.

I have a 7th generation ipod, i have a problem with the pause/play button, it no longer works.
What does it take to make sure it works ????
Thanks

If you successfullt restore to factory defaults/new iPod and still have the problem then it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Allowing the Pause / Play buttons to work with VLC player

I would like to use my pause / play buttons when I am using VLC player. I use VLC player to watch many movies, but I still use iTunes to play music, so I was wondering if there was a way to switch which application my play / pause button controls. Right now, even if VLC player is open it will only control iTunes.
Thanks,
Travis

Under VLC preferences look for the options "Control with media keys" and "...when VLC is in background".

Pause play button

Does having the iPod on pause - play have an adverse affect on battery life???

U it will use some battery so if your going to be away from it for a long while just hold down the play pause button until the ipod screen blacks out. This will save battery life too.

ITunes missing pause/play/ / buttons

For the past month (I believe sometime around the time I updated itunes to iTunes 11) I have been missing the section on my iTunes window that has the pause, play, >>, and << buttons and shows the status of the song (time wise). I am also missing the red, yellow, and green buttons on the upper left hand side and I am unable to click and drag the window around at all. I have googled this problem for hours and come up with nothing. Hoping someone here can help because for a long time the only way to stop a song from playing once it started was the quit iTunes. Now, just today I figured out that I can open the miniplayer on top of my iTunes window and that is better than having to close out of iTunes altogether, but I'd still like the features that are in the miniplayer to be available to me on my screen all the time like they always were in the past.

Hello 3isenuf,
Thanks for using Apple Support Communities.
I'd like you to please reinstall iTunes by following the steps below.
Download the latest installer
Open Safari or another web browser.
Go to the iTunes download webpage and click the Free Download button.
Make sure that the Mac OS X version is selected on that page.
Click the Download button to start the download.
Once the file is downloaded, a new Finder window appears containing two items (below). If a Finder window doesn't appear, locate the iTunesX.dmg file (where X is the iTunes version number) on the desktop (or wherever your downloads go) and double-click it to display these items:
A "Read Before You Install iTunes" file. This document contains the system requirements for the version of iTunes, and may contain other useful information about installing.
An iTunes.mpkg file (this is the installer file itself)
Install iTunes
Quit iTunes if it is currently open.
Double-click the iTunes.mpkg file. This opens the Installer application in Mac OS X.
Follow the instructions in the installer screens. If all of the installation components appear unchecked and dimmed (unavailable, and therefore not installable), refer to Mac OS X iTunes installer components are disabled.
After the installation has completed, quit the Installer and restart the computer. The new version of iTunes appears on your hard disk in your Applications folder.
Opening iTunes
It's possible that clicking the iTunes icon in your Dock or double-clicking an iTunes icon on your desktop could open an older version of iTunes. Open iTunes from the Applications folder to be sure you are opening the right version:
Double-click your hard disk.
Double-click the Applications folder.
Double-click the iTunes icon.
If you notice another copy of iTunes in the Dock after following these steps, here's a way to take care of that:
Quit iTunes.
Drag the iTunes icon out of the Dock.
Drag the iTunes icon from the Applications folder to the Dock.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/HT2311
Take care,
Alex H.

I was playing Angry Birds and had to hit the pause button to listen to something. When I hit the pause/play button again to resume, I heard talking that sounded like a talk-radio program and I couldn't turn it off, even when I turned off my iPad.

Does anyone know what would cause me to start hearing a talk program of some type after hitting the play button after it had been on pause. Hitting the pause button shuts off the talking, but hitting the play button starts it up again. The strange thing is that the talking continues even after I turn off my iPad. The talk program was about silly or trendy news items, not regular news. It sounds like it could be a talk-radio program, but there were no call letters or information on where it was coming from or who was talking. The person doing all the talking is a male and sounds like he could be in his 20's. The only way I could turn it off was to hit the pause button and then turn off my iPad. I just got my iPad last week and had not had any problems with it until this happened. At the time this happened I was playing a version of Angry Birds that kept being interrupted by t-mobile commercials from time to time, which I had never experienced before. either.

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

AS3 sound pause/play buttons not working

I have three buttons:play_btn, pause_btn; and stop_btn within a movie clip labeled controller.
I can't make the play button start where the pause button is left. Everytime, the sounds starts from the beginning.
Please help!
var mySoundReq65:URLRequest = new URLRequest("sounds/pronouns.mp3");
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:uint= 0;
var isPlaying:Boolean = new Boolean();
var isPaused:Boolean= new Boolean();
mySound65.load(mySoundReq65);
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
if(isPaused) {
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65 = mySound65.play(lastPosition);
isPlaying=true;
// pause sound
function pauseSound(event:MouseEvent): void{
if(isPlaying)
lastPosition=Math.floor(mySoundChannel65.position);
mySoundChannel65.stop();
isPlaying=false;
isPaused=false;
else if (isPaused){
mySoundChannel65=mySound65.play();
isPlaying=true;
isPaused=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
Thanks in advance for any help.

Kglad:
Thanks for replying again. I fixed my script and it's working fine now. The final script is as follows:
var mySound65:Sound = new Sound();
var mySoundChannel65:SoundChannel = new SoundChannel();
var lastPosition:Number= 0;
mySound65.load(new URLRequest("sounds/pronouns.mp3"));
var isPlaying:Boolean = new Boolean();
controller.play_btn.addEventListener(MouseEvent. CLICK, playSound);
controller.pause_btn.addEventListener(MouseEvent. CLICK, pauseSound);
controller.stop_btn.addEventListener(MouseEvent. CLICK, stopSound);
// play sound
function playSound(event:MouseEvent): void{
if(!isPlaying){
mySoundChannel65 = mySound65.play();
isPlaying=true;
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
controller.play_btn.visible=false;
controller.pause_btn.visible=true;
// pause sound
function pauseSound(event:MouseEvent): void{
lastPosition = mySoundChannel65.position;
mySoundChannel65.stop();
controller.play_btn.visible=true;
controller.pause_btn.visible=false;
// stop sound
function stopSound(event:MouseEvent): void{
SoundMixer.stopAll();
lastPosition=0;
mySoundChannel65.stop();
isPlaying=false;
controller.play_btn.visible=true;
I added a couple of things:
a) To avoid clicking the same button more than once, I made either pause or play button invisible.
b) The solution was to include the following conditional in the play button:
if(lastPosition>0) {
mySoundChannel65 = mySound65.play(lastPosition);
Thanks again!

How do I assign the play button on my remote control

I made a simple menu with two buttons and it activates the buttons when I select using arrows and push enter, but not when I push play. I would like to be able to start the movie by pushing play as well. Thank you to anyone who can help me!
Juli Kang

Open up your menu and then select the menu.
Then go to the advanced tab and see what buttons you can enable or disable for the remote. Look under "playback control", "stream selection", "menu call", and "button".
If you have everything enabled, and it doesnt work, then it is just your player.
I am pretty sure it just depends on the player you have.
If hitting play doesnt start the track, then you are just barred i guess with that player. Try another player to see if it works.
Read the manual as well to see what it says.

Play pause toggle button

Hi,
I'm new to Flash. Kindly help anyone.
Need assistance to create toggle button. Here attaced two screenshots.
1. inner-animation.jpg - it contains all movie clips and play pasue controls.
2.main-animation.jpg - this is the main timeline ( inside all movie clips & control buttons)
3.playbuton-inside.jpg - its a button symbol ( as well as pause )
4. There also bg music and sounds for some particular animation.
Here all working fine. But i need play & pause animation as a toggle button.
Here is the code i added for pause:
play();
pause_btn.onRelease=function(){
stop();
Here is the code i added for pause:
stop();
play_btn.onRelease=function (){
play();

You are using AS2 code, so you should be posting in the AS2 forum (http://forums.adobe.com/community/flash/flash_actionscript?view=discussions). If the intention is to use AS3 code, then you need to change things.
If the intention is to use the same single button for both pause and play, then what you normally would do is establish a boolean variable that you se to determine whether the clicking of the button should play or stop the movie...
var playMovie:Boolean = true; // assumes the movie is stopped at the start
pause_play_btn.onRelease = function (){
   if(playMovie){
       play();
       // manage play/pause btn
   } else {
       stop();
       // manage play/pause btn
   playMovie = !playMovie; // reverse the value of the playMovie variable
In that code where I show "// manage play/pause btn" is where you need to do whatever you need to make the pause/play button appear as intended... either hiding one or the other, or changing its frames to show the appropriate image.

How can I make PLAY button be selected by default in top menu?

Hi, I usually have the PLAY button and all the scene selection buttons show up in the same top menu on my DVD's. Is there a way to have the PLAY button be the one that is initially selected when the DVD starts up. In other words, I don't want people to have to scroll the various buttons on the menu to get to the PLAY button. I want it to be selected by default, so all they have to do is hit the PLAY button on their remote control to start the movie.
Thanks, Bob

I think Robert was referring to the triangular play button on the simulator control panel rather than the button on his menu marked 'Play'...
Robert - the 'Enter' button (or your 'Return' key on your keyboard) are the only ways you'll get the simulator to begin to play your project. The Triangular play button is for when you are in a motion menu or track and you pause and re-start playback, and isn't used to select entries on the menu. When you start a track, note how the triangular play button becomes a pause button when the track starts running, and it is no longer greyed out... if you click it, you'll see the triangle return and also not be greyed out.

Play button doesn't work -- doesn't select menu item

By default, the first thing selected in my encore menue is a text button that says "play all". So, you can start the DVD playing by pushing the enter button on the remote, by pushing the play button on the remote, or by pushing the play button on the dvd player. This is as it should be; this is for my dvd (not blu-ray).
When I burn a blu-ray (instead of a DVD), the play button on the remote and the play button on the dvd player do not work. I can only use the enter button on the remote.
I ran a second test by burning a very short movie clip with a simple button in encore. Again, the results were the same--no problems for a dvd, but messed up for a blu-ray.
I am playing the DVD and blu-ary on the same player.
Any ideas?
Thanks

Hi Jim:
The problem is not with the player, a Sony.
A couple of months ago I authored a DVD (Blu-ray) of a wedding anniversary the main menu of which had just a couple of buttons -- the video (about 40 minutes) and a slideshow of a couple of hundred slides with music.   It was wedding present. Everything worked as planned, not only on my Sony equipment but on Panasonic and LG. Menu items highlighted as they should and could be toggled by the remote, just as things have been for years (since 1996 for me I guess.)
The people subsequently asked for 3 extra blu-rays and 12 regular DVDs for people who had seen it but didn't have Blu-ray players. No problem, said I. I still have the Encore "ncor" file and plenty of blanks.
Turns out that I must have relocated some files -- Encore could not find the previous folder. Fortunately the Premiere program files were intact so I simple created a new Encore project and created a new ISO file. This time I made a couple of menu pages and created chapters as well as the slide show. I made a DVD (on a re-writeable disc) and it worked as expected. I cut a dozen disks and labeled them. Meanwhile I made the blu-ray iso file (having made the required changes in Encore.)
First got a Photoshop error code -45 (although I had not even opened Photoshop for a month.)
I shut down everything with the idea of starting Encore as the Administrator (a trick that has fixed other problems) and the blu-ray image file was created without a hitch. But still got an ISO file that, when burned to a blu-ray, had buttons that would not highlight and would not work.   Also the "pause" button would not work. (I have a long organ piece with the home menu page.) Nor would the number buttons. Just the "top menu" buttons on the remote.
Obviously everything worked in preview: highlights showed on the buttons that, when pressed, went to the right files.   So everything works perfectly well in Preview and with DVD. It is just with Blu-ray that there is a problem. And it is with any and all players.
The same Blu-ray can be played on a computer using the mouse. Again, the buttons themselves do not highlight so the software remote does not function.
Confusing............
Any additional thoughts?
Barrie Austin
[email protected]
425-392-5760/425-922-0540 (Cell)

Pause/play buttons on black remote

Similar Messages

Maybe you are looking for