Payload with Spaces

Hi,
In my scenario I am getting the data transferred to the receiver system properly.But the input payload generated is having spaces .
The input XML is as follows : The XML is generated correctly but there is a gap after Data. Each time a gap is generated before the fields .Can anyone comment on this.
<?xml version="1.0" encoding="utf-8" ?>
- <ns:DEMO_MT xmlns:ns="urn:unilever.com/demo">
- <Record>
- <Data>
<row>101015,112007,DETS,RPXF17A,20071116,166.66,500,200,6,18,16</row>
</Data>
- <Data>
<row>101015,112007,DETS,RPXF17A,20071116,166.64,501,201,7,19,17</row>
</Data>
</Record>
</ns:TURSAL_UNIFY_MT>

Hi Amit,
Dowload the file from Appliacation server / FTP to u r desktop and check the file whether its contains the spaces or not.
Cheers
Veera
>>>Reward points, if it is needful

Similar Messages

Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

Hi All,
I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
Test Disk 3" as follows:
The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
If you modify the data in the SharedVolumeMappings value in both
0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
and would be prone to errors that could cause further problems.
Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
Many thanks in advance,
Tom

Hi Subhasish,
Thanks for the reply, glad that its something that is reproducible!
Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
VMs?
Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
Thanks again,
Tom

Problems with spaces in file or directory names and Word.exe

Hi
I'm trying to open a file with Word from my java aplication, and I have a problem with some file/directory names.
I have this
String cmd = "c:\\Program Files\\Microsoft Office\\Office10\\WINWORD.EXE" + " " + path;
try {
Runtime.getRuntime().exec(cmd);
} catch (Exception errorea){ }
Here is what happens:
if path is something like this: "c:\people\info.doc" , there's no problem, Word opens the document, but if path contains blank spaces somewhere, it doesn't work. For example:
path = "c:\Documents and Settings\info.doc"
path = "c:\Hi everybody\info.doc"
path = "c:\tests\test results.doc"
with the above examples it doesn't work :( Word tries to open "c:\Documents", "c:\Hi" or "c:\tests\test".
Can anyone help? thanx a lot ! : )

Hint: use the variant Runtime.exec(String[] args).
Create a command array, with each token in a separate argument. The entire filename with spaces goes into one argument.

[SOLVED] problem with spaces and ls command in bash script

I am going mad with a bash script I am trying to finish. The ls command is driving me mad with spaces in path names. This is the portion of my script that is giving me trouble:
HOMEDIR="/home/panos/Web Site"
for file in $(find "$HOMEDIR" -type f)
do
if [ "$(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)")" -gt 30 ];
then echo -e "File $file is $(dateDiff -d $(ls -lh "$file" | awk '{ print $6 }') "$(date +%F)") old\r" >> /home/panos/scripts/temp;
fi
done
The dateDiff() function is defined earlier and the script works fine when I change the HOMEDIR variable to a path where there are no spaces in directory and file names. I have isolated the problem to the ls command, so a simpler code sample that also doesn't work correctly with path names with spaces is this:
#!/bin/bash
HOMEDIR="/home/panos/test dir"
for file in $(find "$HOMEDIR" -type f)
do
ls -lh "$file"
done
TIA
Last edited by panosk (2009-11-08 21:55:31)

oops, brain fart. *flushes with embarrassment*
-- Edit --
BTW, for this kind of thing, I usually do something like:
find "$HOMEDIR" -type f | while read file ; do something with "$file" ; done
Or put those in an array:
IFS=$'\n' ; files=($(find "$HOMEDIR" -type f)) ; unset IFS
for file in "${files[@]}" ; do something with "$file" ; done
The later method is useful when elements of "${files[@]}" will be used multiple times across the script.
Last edited by lolilolicon (2009-11-09 08:13:07)

Unable to access files with spaces in the path

Hi all, I am accessing files which reside on the server using a java applet.
The typical path of a file could be:
http://192.168.0.2/agat/data/AF190701 0003.agt
(not the space in the filename).
When I try to open this file using a URL object:
URL file = new URL(filename);
BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));
I get exception 400 ( I think) whihc I assume is file cant be found.
However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.
What should I do to make the applet able to open paths with spaces? Or is this just not possible.
I did try including quotes with the special characte precessor:
filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""
But this didnt work either, please could someone tell what I need.
Thanks.

Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.
while (file.lastIndexOf(" ") >0)
String temp;
int num = file.lastIndexOf(" ");
temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
file = temp;
}

How to access a url in file receiver CC with space in the folder name?

Hi
PI 7.11 sp4:
In a file receiver channel I would like to send the message to this folder:
de-prod.dk\bu\something\something\PTI eventstanden\archive\"
But I get this error message:
"Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
When I log on the server on which Pi is running I can access the folder using the mentioned url including the ""s.
All suggestions would be highly appreciated!
MIkael

> But I get this error message:
>
> "Target directory 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\"\de-prod.dk\bu\something\something\PTI eventstanden\archive"' does not exist"
>
> My question is: where the f.... does it get the 'F:\usr\sap\XP7\DVEBMGS02\j2ee\cluster\server0\ from, and how can I fix it?
It comes from the "
Anything else but \ is treated as local folder under working directory of PI
> One issue is the space in the folder name. I have tried to replace the space with %20 and then remove the "" s around the whole url, but without any luck.
It works for me just to copy the folder from Windows explorer into channel config. With space and without ".

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

Error in query " Value '' of characteristic is not a number with spaces "

Hi Gurus,
I am facing an error in a query with the description:
Error
Value '' of characteristic is not a number with spaces
System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Description
This error is occuring in Production system only, the report is running fine in Development environment.
The error is also visible when I execute it in RSRT, I am not able to find the cause of error through RSRT.
Can anyone please help me with the possible solutions.
Thanks & Regards,
Shreyas

Hi Juergen,
thanks for the input, I tried to run the report after loading the master data but still there was no improvement.
I am not sure why this kind of problem is rising, some of the similar reports on same infoprovider are running fine.
Please let me know if you know anything about the cause of error.
Thanks & Regards,
Shreyas

Handling flat file conversion with spaces inbetween at sender side

Hi,
   I am facing some problem in configuring the sender JMS adapter file content conversion. Please find the structure of my file below
010AG 07/17/2007 000130800 TOZ07/17/200710:48:46
010AU 07/17/2007 006682800 TOZ07/17/200710:48:46
010-Record key
AG-Metal code
07/17/2007 -price Date
000130800 -pricevalue
TOZ-Unitofmessure
07/17/200710:48:46-Unitofmessure
there are 2spaces inbeween 1and 2nd fields and one space beween 2nd and 3rd ,one space between 3rd and 4th fileds
I declared my source data strucute like below
<source_MT>
<PriceData>
     <Metal code>
      <price Date>
      <pricevalue>
      <Unitofmessure>
       <shipDate>
</priceData>
</source_MT>
I am using this PDF to configure my serder communication channel https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b7
. but i got struck up in declaring these two fields as i need deal with spaces.
xml.NameA.fieldNames
xml.NameA.fieldFixedLengths
It would be great if sombody tell me how ican decalre content conversion rules for the file
Thanks
sudheer

Hi,
Please check some links on FCC.
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani

Export Excel Table in .txt File with space delimited text in UNICODE Format

Hi all
I've a big unsolved problem: I would like to convert an Excel table with some laboratory data in it (descriptions as text, numbers, variables with some GREEK LETTERS, ...). The output should be a formatted text with a clear structure. A very good solution is
given by the converter in Excel "Save As" .prn File. All works fine, the formattation is perfect (it does not matter if some parts are cutted because are too long), but unfortunately the greek letters are converted into "?"!!!
I've tried to convert my .xlsx File in .txt File with formatting Unicode and the greek letters are still there! But in this case the format is not good, the structure of a table is gone!
Do you know how to save an Excel file in .prn but with Unicode formatting instead of ANSI or a .txt with space delimited text?
Thanks a lot to everyone that can help me!
M.L.C.

This solution works in Excel/Access 2013.
Link the Excel table into Access.
In Access, right-click the linked table in the Navigation Pane, point your mouse cursor to "Export", and then choose "Text File" in the sub-menu.
Name the file, and then under "Specify export options", check "Export data with formatting and layout". Click "OK".
Choose either Unicode or Unicode (UTF-8) encoding. Click "OK".
Click "Close" to complete the export operation.

Photoshop not working with "Spaces"

Whenever I try to view multiple, open photoshop documents with spaces, I'm unable to see each document in their assigned space. Anyone else having this problem?

I apologize, I meant to say the "all windows" function. All of my open photoshop documents will only show up as a white and gray checkerboard image.

Document library: File name with spaces at EOF

I noticed a strange issue with uploading files with space at end of file (example "ABC .xlsx"). Such files are allowed to be uploaded for the first time but when the end user (with contribute permission) tries to upload the same file again
(overwrite) then it uploads the file and goes to the next dialog box where properties for the form is collected (EditForm) and then when user tries to hit save, he gets "Sorry this site is not shared with you" error. The owners (with Full control
permission) get the error message that the file needs to be renamed.
This does not happen with files having proper names. The files are automatically overwritten as expected.
Is it a SharePoint bug or am I missing something ?

Hi Prakash,
When we upload a document which contains spaces at the end of the file name, then SharePoint will trim out the spaces in the Edit Item Form, so the name for this document should be “ABC.xlsx”.
When we re-upload the document to SharePoint, because of that extra space it sees the filename(ABC .xlsx) as different to the existing document (ABC.xlsx) so it adds it as a new document.
And in the edit item form, the space has been trimmed out. Because there is already a document with that filename in the document library, it throws the error.
So this issue is by design that SharePoint uploads the document first and then edit the properties of the document.
For more details, please refer to the link below:
https://discoverlars.wordpress.com/2012/10/27/sharepoint-doesnt-overwrite-a-document-with-the-same-name-but-creates-duplicates/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Link to Network Drive with Spaces

I need to create a link in SharePoint 2010 that points to a network drive with spaces in the title. SharePoint substitutes %20 for spaces, but I need the space character.
For example:
file:///\\company\foldername works
file:///\\company\folder name does not work, it becomes
file:///\\company\folder%20name
Has anyone run into this issue before?

Hi Andy,
20% represents space in url encoding and it is hardcoded. I don’t think it is better to remain space character in the link.
http://en.wikipedia.org/wiki/URL-Encoding
Here is a thread discuss about that:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5cc9881d-e72c-434f-be07-bd6d2a74eec6/sharepoint-file-issue-20-replaces-space-in-file-name?forum=sharepointadminlegacy
http://www.networkworld.com/article/2221731/microsoft-subnet/simple-naming-conventions-that-improve-end-user-experience-in-sharepoint-sites.html
Regards,
Rebecca Tu
TechNet Community Support

Use REGEXP_INSTR to find a text string with space(s) in it

I am trying to use REGEXP_INSTR to find a text string with space(s) in it.
(This is in a Function.)
Let's say ParmIn_Look_For has a value of 'black dog'. I want to see if
ParmIn_Search_This_String has 'black dog' anywhere in it. But it gives an error
Syntax error on command line.
If ParmIn_Look_For is just 'black' or 'dog' it works fine.
Is there some way to put single quotes/double quotes around ParmIn_Look_For so this will
look for 'black dog' ??
Also: If I want to use the option of ignoring white space, is the last parm
'ix' 'i,x' or what ?
SELECT
REGEXP_INSTR(ParmIn_Search_This_String,
'('||ParmIn_Look_For||')+', 1, 1, 0, 'i')
INTO Position_Found_In_String
FROM DUAL;
Thanks, Wayne

Maybe something like this ?
test@ORA10G>
test@ORA10G> with t as (
2    select 1 as num, 'this sentence has a black dog in it' as str from dual union all
3    select 2, 'this sentence does not' from dual union all
4    select 3, 'yet another dog that is black' from dual union all
5    select 4, 'yet another black dog' from dual union all
6    select 5, 'black dogs everywhere...' from dual union all
7    select 6, 'black dog running after me...' from dual union all
8    select 7, 'i saw a black dog' from dual)
9 --
10 select num, str
11 from t
12 where regexp_like(str,'black dog');
       NUM STR
         1 this sentence has a black dog in it
         4 yet another black dog
         5 black dogs everywhere...
         6 black dog running after me...
         7 i saw a black dog
5 rows selected.
test@ORA10G>
test@ORA10G>pratz
Also, 'x' ignores whitespace characters. Link to doc:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions007.htm#i1048942
Message was edited by:
pratz

Field names with spaces in target file using fcc

Hello Friends,
My target structure fields:
MT_Target
ItemNo, ItemName, ItemQuantity, AmountValue, TotalAmount
My requirement here is - In the target file - these fields should be generated with space. Shown as below:
Item No, Item Name, Item Quantity, Amount Value, Total Amount
How can i achieve this.
Thanx
S.

if i understood u correctly u want to have a header line in ut target file same as that ur field names but with a space in between??
if yes the use :
NameA.addHeaderLine=3
NameA.headerLine =Item No, Item Name, Item Quantity, Amount Value, Total Amount
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm

Payload with Spaces

Similar Messages

Maybe you are looking for