Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

Hi All,
I have identified a bug in the copy cluster roles wizard in 2012 R2, which is preventing me from migrating my clusters from 2008 R2 & 2012 to 2012 R2.
The bug surfaces when you attempt to copy a VM role from a 2008 R2 or 2012 cluster that has a CSV reparse point name that contains spaces as follows:
The role appears to copy across fine, but once you've migrated the CSV and brought it online followed by starting the VM, the VM configuration resource promptly fails along with the VM.
The issue can be spotted inside the copy cluster roles wizard, where it presents itself by removing all text after the first space in the name to read "C:\ClusterStorage\CSV" rather than "C:\ClusterStorage\CSV
Test Disk 3" as follows:
The bug only appears for VMs on CSVs with a reparse point name containing spaces - all other scenarios succeed.
After searching through the registry on the new cluster, you can clearly see that the VM role hasn't been correctly copied.
It shows a value called SharedVolumeMappings with the data C:\ClusterStorage\CSV|<guid>|<integer>
Whereas it should show the data C:\ClusterStorage\CSV Test Disk 3|<guid>|<integer>
If you modify the data in the SharedVolumeMappings value in both
0.Cluster\Resources\<VM guid> and Cluster\Resources\<VM guid> keys, the VM will start and work correctly.
The problem for me is that I have many VMs on many different CSVs all with spaces in the names of the reparse point! Its not feasible for me to go through the registry for every copied VM on every node of the new cluster, as this would take a very long time
and would be prone to errors that could cause further problems.
Can anyone provide any help on this? A hotfix for the issue would be great, if anyone from Microsoft is reading :-)
My deadline to get the VMs migrated to the new cluster is the 21st February, so I would really like to have a solution to the problem before then if at all possible.
Many thanks in advance,
Tom

Hi Subhasish,
Thanks for the reply, glad that its something that is reproducible!
Do you have any idea of timescale? Or is it likely that I will have to modify the registry as above to get this working?
If I am going to have to modify the registry, please can you let me know if the resolution I have tested above is safe and viable? Or are there other settings that I will need to change to make the cluster fully aware of the proper path to the CSVs for its
VMs?
Also, is there a known procedure for renaming the reparse point whilst VMs are running on it? This would allow me to negate the issue before copying the roles to the new cluster :-)
Thanks again,
Tom

Similar Messages

Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

when trying to download new messages into Thunderbird, I keep getting the error message:
Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
what does this mean and how do I correct it???
thanks

I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
The site you recommended is "having difficulties".
May 4
I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

Hi there,
I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
instances.
A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
Currently both instances are running on same node.
While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
Please help resolve the issue.
Thanks,
AY

Hello,
I Confirm that I encountred the same problem when the first domain controller was dow !!
During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
When the firts DC restart finishied restarting every thing was Ok !
The Question here : Why the cluster instance does'nt used the second DC ???
Best Regards
J.K

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number?

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?

No. Turn it into the military police.

Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.

Hello,
I have gone through couple of posts regarding this issue but couldn't get the right solution. Could you please help what exactly we are missing here.
Details:
1) we have two SQL instances on one standalone machine (Default Instance (2008 SP3) + Named Instance (SQL 2012 SP1))
2) Both instances are configured to accept SQL+ Windows authentication.
3) when we give access to our users they are getting following exception if they connect with 'windows authentication'. (For both instances)
Login failed. The login is from an untrusted domain and cannot be used with Windows authentication.
Note: (Being a sys + windows admin I'm able to connect both the instances from same client machine without
any issues)
4) Also, we observed following error in windows application event log,
SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.
The logon attempt failed [CLIENT: 192.168.xxx.xyx]
5) If we create SQL login it is working fine without any issues.
Could someone guide/help me identifying and fixing this issue.
Thank you

Hello,
Are those Windows Logins associated to domain Windows accounts? Windows Logins work for domain accounts and local Windows account created on the server where the SQL Server instance is installed (and used to login locally to the server).
Could you try to delete one of the Windows logins that fail to login , and try to recreate them?
The following resources may help:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/12/19/error-message-quot-login-failed-the-login-is-from-an-untrusted-domain-and-cannot-be-used-with-windows-authentication-quot.aspx
http://support.microsoft.com/kb/555332
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

I am running out of hard drive space so I clear 32GB of space at midnight, went to bed. When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore? What's eating it up?

I am running out of hard drive space so I clear 32GB of space at midnight and went to bed.
When I wokle up I had no space left even though I had not used the computer, the system.lg is FULL of stuff and I have no HD space anymore?
What's eating it up?

WORD TO THE WISE
the OmniDiskSweeper was a very helpful download, because it laid out the HD and all the files on it in a "largest to smallest" fashion. When I did this I found that I had an inordinate amount of memory being taken up in my Mail Data folder, this did not make much sense so when I dug deeper I found that a 59MB scanned file that I had emailed 3 weeks ago had not been delivered, so the computer was retrying every minute and saving the history of what it was doing, so it was saving the 59MB file as well as the log about the 59MB file and hence for the last 3 weeks it's been chewing away at HD space recording the activity of the undeliverable file.
I deleted the Data record folders and removed the yahoo account from My Mail and reinstalled it with proper IMAP information and the HD is secure and holding at 331GB of free space. Like it ought to be.
I love the fact that if something very strange is happpening on your MAC there is a REASON....find it and fix it, and move on. In the PC world you would reboot 20 times, call some guy in India who will ony try to sell you a new subscription or warranty for $99 and never solve anything.
I am at rest once more, thanks for the tip

My Verizon Cloud says "Content is pending for backup" and (Update pending), but it's been doing this for over a day now. The number of photos hasn't changed and I have 26GB of space. What's going on?

My Verizon Cloud says "Content is pending for backup" and (Update pending), but it's been doing this for over a day now. The number of photos hasn't changed and I have 26GB of space. What's going on?

Tinigal2112,
We want to make sure your photos are backed up successfully! Have you tried to stop the process and start it again? You can stop the process by stopping the Cloud and backup process completely in Settings>Applications>All>Verizon Cloud>Force stop. One it has stopped make sure you care connected to WiFi and try the backup again.
LindseyT_VZW
Follow us on Twitter @VZWSupport

Role names with spaces (6.1 to 8.1)

Hi All
I'm working in an organization that has group and role names within their LDAP
repository such that the group and role names contain spaces. Hence, for example,
within a web.xml file lines like the following exist:
<role-name>Some Role Name</role-name>
This has worked without problem in Weblogic 6.1 but given some prelimanary work
within 8.1 we are noticing that Weblogic 8.1 does not appear to like spaces within
the <role-name> element.
Is this just the way it is with Weblogic 8.1? Or is there a way to continue to
use role names with embedded spaces within Weblogic 8.1?
Thanks,
Rob

"Peter" <PeterB> wrote:
>
"Rob" <[email protected]> wrote in message
news:3f57d329$[email protected]..
Hi All
I'm working in an organization that has group and role names withintheir
LDAP
repository such that the group and role names contain spaces. Hence,for
example,
within a web.xml file lines like the following exist:
<role-name>Some Role Name</role-name>
This has worked without problem in Weblogic 6.1 but given some prelimanarywork
within 8.1 we are noticing that Weblogic 8.1 does not appear to likespaces within
the <role-name> element.
Sounds like a bug. File a support case.
Hi,
A workaround exists :
1 - in web.xml, update your role-name element by replacing spaces with "_"
2 - in weblogic.xml, add :
<security-role-assignment>
     <role-name>Some_Role_Name</role-name>
     <principal-name>Some Role Name</principal-name>
     </security-role-assignment>
Regards
Christophe

Have just found a hickup on the Lion software 10.7.2 When using a access point that you name with letters that is only in Norwegian æøå you will loose connections and only get time out. So the solution will be to rename the access point.

Any solution beside to rename the wifi access point without the spesial Norwegian letters æøå?

Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

Can't paste copied entries from online CSV file into Excel spreadsheet (chatted with zzxc on 5/3/10 at around 2.30 CST but got disconnected. did not get an answer ...)

Here is the transcript of a chat with Firefox community member zzxcon May 3/10
You are now chatting with Firefox community member zzxc
zzxc: Hello
zzxc: What happens when you attempt to download a .csv file?
seegal: hello
seegal: it doesn't copy
zzxc: how are you trying to copy?
seegal: pls bear with me I'm a slow typist. Just copy selected text
Biolizard has joined the conversation.
zzxc: ok - which text are you selecting?
seegal: I reconcile my checkbook (spreadsheet this way). I copy the items in my online bank acc and paste it to the spreadsheet
seegal: I'm using Firefox /2.0.0.19. Have no problem to do this.
zzxc: Which version of OS X?
seegal: In all newer version nothing happens when trying to paste- just doesn't paste
zzxc: Firefox 2.0.0.x is no longer supported, and hasn't been supported in over a year
zzxc: Paste into Excel, from Firefox?
seegal: Sorry, I'm ahead... /2.0.0.19
seegal: Yes. I open my bank acc in Firefox
zzxc: Which version of Excel?
zzxc: It would really help if you could tell me step by step what you're doing.
seegal: First re: your previous question: it's OS 10.4.11
seegal: About Excell: it'as 2004 version - the lasat one produced for Macs. The specific version is 11.3.7
seegal: So I open my bank acc online in Firfox (my primary browser). I copy the latest entry in the account and paste it into my Excel spreadsheet.
zzxc: so, you copy direct from the web page without downloading a CSV file?
seegal: What do you mean by downloading to CSV file? I could export from the https://chat-support.mozilla.com:9091/webchat/getimage?image=sendmessage&workgroup=support%40workgroup.chat-support.mozilla.comFirefox to the CSV file, but the other way around?
zzxc: Are you copying your bank statement directly from the web site to Excel using the clipboard?
seegal: sI don't use the clipboard. This is a mac. There is no need to do that. In PC it would be yes.
zzxc: I need to know the exact steps you're taking to get them into excel
zzxc: And I need to know what exactly goes wrong in the latest version of Firefox.
seegal: Do you have a mac there with Firefox and Excel? It would be very easy to reproduce. Imagine you open an online bank acc, select some entries , click "copy", than proceed to your already open Excel spreadsheet and click' paste". That's it!
zzxc: When this happens, do you get cryptic code pasted into Excel?
seegal: As I said before: in all newer versions starting with 3.0 when I go to Excel to "paste" from my bank acc nothing happens. It does not paste. No, I don't get a cryptic code pasted, just NOTHING.
zzxc: what if you paste into MS Word instead?
seegal: haven't tried that, the formatting most likely would be lost. Tried that with an other Exc el spreadsheet- it lost all the formating and pasted as continous text.
== This happened ==
Every time Firefox opened
== Pls. see copy of the chat above. THIS A MAC OS X. In older versions, prior to 3.0 I could copy from CSV file on the website Ibank acc) and paste directly to my Excel spreadheet to reconcile my account.

See also:
Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852
TableTools: https://addons.mozilla.org/firefox/addon/2637

I've imported one folder with MXF files successfully, but cannot do it with the other two folders. I fear I may have messed with the original naming. How can I import the rest?

I shot footage with a rented Canon C300 (using their cards). I transferred the footage to my laptop and I've been able to use log and transfer for the first folder of footage, but the remaining two folders of footage aren't being acknowledged as importable [it "contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."] is there an example of a valid structure that I could mirror to make log and transfer successful?

Look at the first folder for the proper file structure. But it might not be as simple as folders and the order things are, you might be missing ancillary data...files that tie to the media files. If you are, then L&T won't work, and your best bet is to get the Calibrated MXF software from divergentmedia.com That will allow your computer to read the MXF files natively...to allow you to convert them to ProRes. (trying to work with those native might prove difficult).
I highly recommend tapeless offload software when shooting tapeless. ShotPut Pro from imagineproducts.com is my favorite...works with just about every tapeless format. What it does is copy the footage, and verify that everything has copied over...double checks everything. It also automates the process, will offload to multiple locations... I swear by this software.

In the middle of a session foxfire comes up not responding a lot of the time if i am on the same page 5 minutes or more then i have trouble with get out [end now] some times i have to cut computer off manually please help this is annoying

it does this when i stay on the page 5 minutes or and try to scroll up or down it shows 'not responding' then the boxs comes up with 'end now' or cancel'[return to windows to check on program] then it want let me end now display at program not responding at down i have to turn off manually this is windows xp compaq presario 2002 year model telphone hi speed internet provider google is search engine

I personally like to Crop, and then use PNG for my screen-caps. If I need more images, say to show other Palettes, etc., then I do one each for those shots.
We see a lot of full-screen caps posted, where aggressive JPEG is used, and nothing can be read. That is especially true with images, like Adobe Encore's Flow-chart, where there is a lot of text and linking being shown.
Just my personal preferences.
Hunt

I can't find most of my files for the songs in my iTunes library and so cannot Sync them with my iPhone, Help please

Help please! When I try to sync my iPhone it tells me it can't find most of my files for the songs in my iTunes library, although the songs are there!!

Can anyone help?

TS4036 on iCloud I get The last backup could not be completed? I have 4gb of space

Hi trying to back up my stuff on icloud. I can do it on the computer but it will not let me on my iphone.
i have 4GB space, so thats not the problem.
it says - The last backup could not be completed.
any ideas?
thanks

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

Bug in the copy cluster roles wizard - CSV reparse points cannot have names with spaces

Similar Messages

Maybe you are looking for