PC crashed trying to reload iTunes from XML file.

I am trying to reload iTunes library from a XML file. I followed the support suggestions of draging and droping the file into the music tab in itunes. As well as placeing the XML file into the iTunes library itself. I have had zero luck with either. If I open the XML file I can see a ton of script and code. Can you reload iTunes from XML file at all? Help Any suggestions would be great.

OK, I decided to give Apple more money and bought iTunes Match. It seems to be more headachs than it's worth. And it's neglected by Apple. Last time I'll be doing that! that's for sure!

Similar Messages

I normally do backups of my iTunes music files. After a recent hard disc failure I tried reloaded iTunes from these backups. This was ok but I lost all my ratings. How do I have to save the music library to include the rating information?

I normally do backups of my iTunes music files. After a recent hard disc failure I tried to reload iTunes from these backups. This was ok, i.e. the music was all there but I lost my ratings. How do I have to save the music library to include the rating information?

See this backup strategy.
tt2

Data Load from XML file to Oracle Table

Hi,
I am trying to load data from XML file to Oracle table using DBMS_XMLStore utility.I have performed the prerequisites like creating the directory from APPS user, grant read/write to directory, placing the data file on folder on apps tier, created a procedure ‘insertXML’ to load the data based on metalink note (Note ID: 396573.1 How to Insert XML by passing a file Instead of using Embedded XML). I am running the procedure thru below anonymous block to insert the data in the table.
Anonymous block
declare
begin
insertXML('XMLDIR', 'results.xml', 'employee_results');
end;
I am getting below error after running the anonymous block.
Error :     ORA-22288: file or LOB operation FILEOPEN failed”
Cause :   The operation attempted on the file or LOB failed.
Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
I searched this error on metalink and found DOC ID 1556652.1 . I Ran the script provided in the document. PFA the script.
Also, attaching a document that list down the steps that I have followed.
Please check and let me know if I am missing something in the process. Please help to get this resolve.
Regards,
Sankalp

Thanks Bashar for your prompt response.
I ran the insert statement but encountered error,below are the error details. statement.
Error report -
SQL Error: ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 1
22288. 00000 - "file or LOB operation %s failed\n%s"
*Cause:    The operation attempted on the file or LOB failed.
*Action:   See the next error message in the error stack for more detailed
           information. Also, verify that the file or LOB exists and that
           the necessary privileges are set for the specified operation. If
           the error still persists, report the error to the DBA.
INSERT statement I ran
INSERT INTO employee_results (USERNAME,FIRSTNAME,LASTNAME,STATUS)
    SELECT *
    FROM XMLTABLE('/Results/Users/User'
           PASSING XMLTYPE(BFILENAME('XMLDIR', 'results.xml'),
           NLS_CHARSET_ID('CHAR_CS'))
           COLUMNS USERNAME NUMBER(4)    PATH 'USERNAME',
                   FIRSTNAME VARCHAR2(10) PATH 'FIRSTNAME',
                   LASTNAME    NUMBER(7,2) PATH 'LASTNAME',
                   STATUS VARCHAR2(14) PATH 'STATUS'
Regards,
Sankalp

Is there a way to rebuild the ITunes Library XML file from my IPod?

After several promptings, I finally decided to install ITunes 7.4.3.1. Like a fool, I did not backup my entire library prior to doing this upgrade. Nothing is going to go wrong now mate, is it? Everything seemed to proceed just fine with the upgrade. I noticed that ITunes updated the XML Library in the process. Where the problems occured was after the upgrade, I was in the middle of listening to the latest "NPR Wait Wait Don't Tell Me" Podcast (I have some 3,000 downloaded podcasts in over 85GB worth of space) when ITunes crashed. When I brought ITunes back up, it had seemed to have reverted to an earlier backup ITunes Library XML file that I had made months ago.
I still have all of the .mp3, .m4a, .mp4 and .m4v files stored in my ITunes Music folder. Somehow when I brought ITunes back up, it had lost all of the music I had dowloaded from the ITunes store even though the files were still out on disk. It thought there were only 395 podcasts despite the 3,000 plus files out there.
Clearly, something went horribly wrong and I don't want to spend weeks downloading these files again when the only thing that really needs to be done is the ITunes Library XML data file needs to be rebuilt. It dawns on me that my IPod has an XML data file that save any updates I have not yet synced with it that it is quite current. Is there some way that I can sync my IPod with ITunes and copy the IPod XML data file into ITunes Library XML data file? I know that there must be some way to access the IPod since I can plug it into my Kenwood car stereo and read through the IPod's contents.
Is there anyone out there that has an idea that might be able to help me recover my ITunes library?
Thanks for any assistance,
--randyt00

The XML file is not used by iTunes. It is created for the use of other programs. Your library is in the itl file. SInce you still have the file you could simply add them to your library using the add folder option instead of downloading again.
What are library files
http://docs.info.apple.com/article.html?artnum=93732
Rebuild library.
http://docs.info.apple.com/article.html?artnum=93313

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

LPX-00601: Invalid token in: err while trying to read data from xml

Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile   BFILE;
l_clob    CLOB;
l_parser dbms_xmlparser.Parser;
l_doc     dbms_xmldom.DOMDocument;
l_nl      dbms_xmldom.DOMNodeList;
l_nl2    dbms_xmldom.DOMNodeList;
l_n       dbms_xmldom.DOMNode;
l_n2     dbms_xmldom.DOMNode;
l_temp    VARCHAR2(1000);
v_errors        internet_clients.errors%type;
src_csid       NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset    INTEGER := 1;
src_offset     INTEGER := 1;
lang_context   INTEGER := dbms_lob.default_lang_ctx;
warning        INTEGER;
v_count       number := 0;   --total records
v_count_s      number := 0;   -- sucsess record
v_count_f      number := 0;   -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
    dbms_xmlparser.parseClob(l_parser, l_clob);
    l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
   l_n := dbms_xmldom.item(l_nl, cur_emp);
   cur_emp2:=0;
   loop
     v_count := v_count + 1;
     begin
    -- Use XPATH syntax to assign values to he elements of the collection.
    dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
    dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
    dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
    dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
    dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
        exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
      --COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
   dbms_lob.freetemporary(l_clob);
    dbms_xmlparser.freeParser(l_parser);
   dbms_xmldom.freeDocument(l_doc);
    null;
    ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010

Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service          UTL_DBWS.service;
l_call             UTL_DBWS.call;
l_a_ns                     VARCHAR2(32767);
l_wsdl_url         VARCHAR2(32767);
l_namespace        VARCHAR2(32767);
l_service_qname    UTL_DBWS.qname;
l_port_qname       UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in       SYS.XMLTYPE;
l_xmltype_out      SYS.XMLTYPE;
l_return           VARCHAR2(32767);
BEGIN
l_wsdl_url        := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace       := 'http://tempuri.org/';
l_service_qname   := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname      := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
    wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
    service_name           => l_service_qname);
l_call := UTL_DBWS.create_call (
    service_handle => l_service,
    port_name      => l_port_qname,
    operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
    <GetFieldsName xmlns="' || l_namespace || '">
    <user>' || in_username || '</user>
    <password>'|| in_password || '</password>
    </GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
                                   request     => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
   dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair

Trying to upgrade itunes from 10.4 to 10.6.3 and nothing happens when i click download. could anyone help please?

trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download. could anyone have a suggestion of a possible solution? Thx

trying to upgrade itunes from 10.4 to 10.6.3 while in itunes app and nothing happens when i click download.
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

I am trying to download itunes from the web, but meanwhile I am executing the installation error 2202 appears. Does this problem happens to anyone?

I have a problem when I am trying to download itunes from the itunes web page. After i download the software and execute it appears error 2202 and it is not possible to continue. Does anyone knows how to solve this problem. Francesc from Barcelona

Hi amazer55,
If you are having issues downloading and installing iTunes, or if your computer for some reason thinks you have already installed iTunes when you have not, you may want to try manually removing all of the associated iTunes files and reinstalling the application entirely from scratch. You may find the following article helpful:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Regards,
- Brenden

Help! Trying to move itunes from one PC to another but iPod keeps dying

Hi everyone,
I'm trying to move my itunes from my old, sad lap top to a decent used PC. I tried to go the route of using my iPod as a hard drive to move itunes but when i'm trying to load itunes from the iPod to the new PC, the process is interrupted because the iPod loses power. Now what?? I'm goin nuts...

Once you settle on one of the options Kay provided you with, have a look at this post for some particulars:
http://discussions.apple.com/message.jspa;jsessionid=a-sDj0Cp0o255UV1AE?messageI D=607339&ft=y&#607339

Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't do it because two files, ShellStreams.resources and ShellStreams.dll were in use. Any suggestions, please?

Months ago I tried to uninstall itunes from Windows 7 after an update failed. I couldn't complete it because two files (ShellStreams.resources and ShellStreams.dll ) were in use. I'm ready to try again. Any Suggestions, please.

See Troubleshooting issues with iTunes for Windows updates for tips on repairing the iTunes installation. One of the tools mentioned there, Unlocker, should be able to force delete the files that you are having trouble removing.
tt2

Help please. Lost itunes library.xml file

Hello,
I have windows 7 and have failed in my attempts to locate my itunes library xml file. I think I lost it when I transferred music from one computer to the next. Online I have seen a tutorial on how to find it, user - my music - itunes. However it's not there. I was trying to sync my itunes music to android, but cannot do so unless I have the xml file. Please note, i am not a computer savvy guy. please don't make it to technical.
Thanks
- Anthony

I already have itunes installed and all my music, playlists and podcasts which work fine, but the media cannot be transferred onto my phone via Isyncr due to not having the itunes library.xml file. You are saying all I have to do is get the itl file from my old computer and save it onto my new one. then re-download itunes and it should work?
Edit: I found my old computer and still cannot locate .xml or itl file.
Looked in users/music/itunes music. and nothing saying xml or itl is there.

How to delete a perticular node from xml file using java code

Hii All,
Now i am trying to delete a perticular node from xml file.Like...
XML file:
<Licence>
<SERVER>
<was id="1">1</was>
<was id="2">2</was>
</SERVER>
</LICENCE>
I am working in messaging service using JABBER framework with whiteboard facility.
Here Some commands i have created to add,modify,delete nodes from xml file.They Are
1.If u want to add a new node then.
create Licence.SERVER <ss id="3">ddd</ss> lic.xml
(here u want to add a new node called "ss" under Licence.SERVER.
And lic.xml is tyhe xml file name where it was saved.
2.If u want to delete a node(Suppose <was id="1">),then the command should be
delete Licence.SERVER.was:id='"1" lic.xml
A problem arises that here it find two was attributes.And it delete the last was attribute,not the requested node.
PLEASE HELP ME IN SOLVING THIS CODE..
------------------------------------

Looks like you clicked on "Post" before you pasted in the code you were talking about.

Reading from XML file is too slow

I am trying to read some values from XML file, it takes about 1 or 2 minutes to finish reading, my xml file has about 4000 xml elements. Does anyone know this is normal or something wrong? How could make it faster?
Thank you

fine if it helps others... i hope NI will not be angry *fg*
thx for your bug-report, i do not test the sub.vi until now.
exchange the OR with an AND, solves the problem with the endless-loop, but error checking will not work (the loop only stops if no error AND no start-tag is found)
changing the loop termination condition and putting the NOT from the error condition to the no_starttag_flag do both. correctly stops the loop when error occurs OR no further elements found.
i attached the new sub.vi for version 7.0 and 7.1, also but some colors in the logo, for your convinience
catweazle
Attachments:
xmlFile_GetElements_(Array).vi ‏76 KB
xmlFile_GetElements_(Array).vi ‏65 KB

Error when loading data from xml file

Hi,
I'm trying to load data into a table from XML file using ApEx DATA UNLOAD/LOAD interfaces .
ApEx version is 3.0.1 .
I'm getting this error:
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
How to find cause of the error ?
Janus

Tkank you for the simple but good advice :)
unfortunately even google didn't find many answers :
LPX-00222 + APEX ... NOTHING
LPX-00222 + ORA- ... 2 pages of something like
"Examine the additional error messages and take corrective action"

Storing data from XML files in Oracle DB

Hi!
I just started to work with XML and need to save data from XML files into Oracle database. I tried to run sample from Oracle web site. The code was following:
public class xmlwritedb
public static void main(String args[]) throws SQLException
String tabName = "EMP"; // Table into which to insert XML data
String fileName = "emp.xml"; // XML document filename
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
// Initialize a JDBC connection
Connection conn =
DriverManager.getConnection("jdbc:oracle:oci8:scott/tiger@");
// Insert XML data from file (filename) into
// database table (tabName)
OracleXMLSave save = new OracleXMLSave(conn, tabName);
URL url = save.createURL(fileName);
int rowCount = save.insertXML(url);
System.out.println(" successfully inserted "+rowCount+
" rows into "+ tabName);
conn.close();
But it does not work.
OracleXMLSave object does not see file name.
Please, help me solve this problem. Also,where is it possible to find any documentation on oracle.xml.* classes API.
Thank you.
Maya.
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by sudeepk:
If a java exception is thrown probably during ur install u might have forgotten
grant javauserpriv to scott;
grant javasyspriv to scott;
Thanks
[email protected]
<HR></BLOCKQUOTE>
Thank you!!!

PC crashed trying to reload iTunes from XML file.

Similar Messages

Maybe you are looking for