Pcast in registry and runs in process

I dont have an IPod, and when I upgraded itunes it installed this ipod service that runs every time I run itunes. it's easy enuff to stop the process in ctrl-alt-del, but how can I get it to not run at all?
Also the last spyware that ran on my computer, found what it called a high rick trojan...it was in my registry, Pcast. When I saw it, it said itunes podcast. I was not able to delete this. What is it? can i disable it since I dont really use podcasts?
thanks
Lady K )0(

Hi,
1. can we use more than one DTP parallelly to load data in target? if yes then plz explain.
It will not be advisable to load data in same target from different datasource at the same time.
However, if you are trying to load data from same datasource into various data targets, separate DTPs can be scheduled parallely.
2. can we use more than one IP parallelly to load data in target in BW 3.5? if yes then plz explain.
One IP from same datasource can not be done in parallely. However if you have different sources and corresponding different targets, you can schedule those IPs parallely.
Note that it will never be advisable to load data from various data sources into one target at the same time.
Hope it helps.
Rgrds,
Nilima

Similar Messages

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

How to kill Forms Runaway Process using 95% CPU and running for 2 hours.

We had a situation at E-Business Suite customer (using Oracle VM server) where some of Form processes were not being cleared by form timeout settings automatically.
Also when user exits the form session from front end, the linux form process (PID) and DB session did not exit properly, so they got hung.
They were spiking CPU and memory usage and causing e-business suite to perform slowely and ultimately causing VM host to reboot the production VM guest (running on Linux).
We could see the form processes (PIDs) using almost 100% cpu with "top" command and running for a long time.
Also we verified those Form Sessions did not exist in the application itself.
ie. Using from Grid Control -> OAM-> Site Map -> Monitoring (tab) -> "Form Sessions".
It means that we could safely kill that form process from Linux using "kill -9 <PID>" command.
But that required a continuous monitoring and manual DBA intervention as customer is 24x7 customer.
So, I wrote a shell script to do the following;
• Cron job runs every half an hour 7 days a week which calls this shell script.
• Shell script runs and tries to find "top two" f60webmx processes (form sessions) using over 95% cpu with 2 minutes interval.
• If no process is found or CPU% is less than 95%, it exits and does nothing.
• If top process is found, it searches for its DB session using apps login (with hidden apps password file - /home/applmgr/.pwd).
a. If DB session is NOT found (which means form process is hung), it kills the process from unix and emails results to <[email protected]>
b. If DB session is found, it waits for 2 hours so that form process times automatically via form session timeout setting.
It also emails the SQL to check the DB session for that form process.
c. If DB session is found and it does not timeout after 2 hours,
it kills the process from unix (which in turn kills the DB session). Output is emailed.
This are the files required for this;
1. Cron job which calls the shell script looks like this;
# Kill form runaway process, using over 95% cpu having no DB session or DB session for > 2hrs
00,30 * * * * /home/applmgr/forms_runaway.sh 2>&1
2. SQL that this script calls is /home/applmgr/frm_runaway.sql and looks like;
set head off
set verify off
set feedback off
set pagesize 0
define form_client_PID = &1
select count(*) from v$session s , v$process p, FND_FORM_SESSIONS_V f where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='&form_client_PID';
3. Actual shell script is /home/applmgr/forms_runaway.sh and looks like;
# Author : Amandeep Singh
# Description : Kills runaway form processes using more than 95% cpu
# and Form Session with no DB session or DB session > 2hrs
# Dated : 11-April-2012
#!/bin/bash
. /home/applmgr/.bash_profile
PWD=`cat ~/.pwd`
export PWD
echo "`date`">/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR1=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID1=`echo $VAR1|awk '{print $1}'`
CPU1=`echo $VAR1|awk '{print $2}'`
TIME1=`echo $VAR1|awk '{print $3}'`
PROG1=`echo $VAR1|awk '{print $4}'`
PID_1=`echo $VAR1|awk '{print $5}'`
CPU_1=`echo $VAR1|awk '{print $6}'`
TIME_1=`echo $VAR1|awk '{print $7}'`
PROG_1=`echo $VAR1|awk '{print $8}'`
echo "PID1="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
echo "PID_1="$PID_1", CPU%="$CPU_1", Running Time="$TIME_1", Program="$PROG_1>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
sleep 120
echo "`date`">>/tmp/runaway_forms.log
echo "----------------------------------">>/tmp/runaway_forms.log
VAR2=`top -b -u applmgr -n 1|grep f60webmx|grep -v sh|grep -v awk|grep -v top|sort -nrk9|head -2|sed 's/^[ \t]*//;s/[ \t]*$//'| awk '{ if ($9 > 95 && $12 = "f60webmx") print $1 " "$9 " "$11 " "$12; }'`
PID2=`echo $VAR2|awk '{print $1}'`
CPU2=`echo $VAR2|awk '{print $2}'`
TIME2=`echo $VAR2|awk '{print $3}'`
PROG2=`echo $VAR2|awk '{print $4}'`
PID_2=`echo $VAR2|awk '{print $5}'`
CPU_2=`echo $VAR2|awk '{print $6}'`
TIME_2=`echo $VAR2|awk '{print $7}'`
PROG_2=`echo $VAR2|awk '{print $8}'`
HRS=`echo $TIME1|cut -d: -f1`
exprHRS=`expr "$HRS"`
echo "PID2="$PID2", CPU%="$CPU2", Running Time="$TIME2", Program="$PROG2>>/tmp/runaway_forms.log
echo "PID_2="$PID_2", CPU%="$CPU_2", Running Time="$TIME_2", Program="$PROG_2>>/tmp/runaway_forms.log
echo " ">>/tmp/runaway_forms.log
# If PID1 or PID2 is NULL
if [ -z ${PID1} ] || [ -z ${PID2} ]
then
echo "no top processes found. Either PID is NULL OR CPU% is less than 95%. Exiting...">>/tmp/runaway_forms.log
elif
# If PID1 is equal to PID2 or PID1=PID_2 or PID_1=PID2 or PID_1=PID_2
[ ${PID1} -eq ${PID2} ] || [ ${PID1} -eq ${PID_2} ] || [ ${PID_1} -eq ${PID2} ] || [ ${PID_1} -eq ${PID_2} ];
then
DB_SESSION=`$ORACLE_HOME/bin/sqlplus -S apps/$PWD @/home/applmgr/frm_runaway.sql $PID1 << EOF
EOF`
echo " ">>/tmp/runaway_forms.log
echo "DB_SESSION ="$DB_SESSION >>/tmp/runaway_forms.log
# if no DB session found for PID
if [ $DB_SESSION -eq 0 ] then
echo " ">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "Killed: `hostname -a` Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
# If DB session exists for PID
if [ ${exprHRS} -gt 120 ]; then
echo $DB_SESSION "of Database sessions exist for this forms process-PID="$PID1". But its running for more than 2 hours. ">>/tmp/runaway_forms.log
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo "Killed Following Runaway Forms Process:">>/tmp/runaway_forms.log
echo "-------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "PID="$PID1", CPU%="$CPU1", Running Time="$TIME1", Program="$PROG1>>/tmp/runaway_forms.log
kill -9 $PID1
#Email the output
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
else
echo "Process running time is "$exprHRS" minutes.">>/tmp/runaway_forms.log
echo $DB_SESSION "of Database sessions exist for PID="$PID1" and is less than 2 hours old. Not killing...">>/tmp/runaway_forms.log
echo "For more details on this PID, run following SQL query;">>/tmp/runaway_forms.log
echo "-----------------------------------------------------------------------">>/tmp/runaway_forms.log
echo "set pages 9999 lines 150">>/tmp/runaway_forms.log
echo "select f.user_form_name, f.user_name, p.spid DB_OS_ID , s.process client_os_id,, s.audsid, f.PROCESS_SPID Forms_SPID,">>/tmp/runaway_forms.log
echo "to_char(s.logon_time,'DD-Mon-YY hh:mi:ss'), s.seconds_in_wait">>/tmp/runaway_forms.log
echo "from v\$session s , v\$process p, FND_FORM_SESSIONS_V f">>/tmp/runaway_forms.log
echo "where S.AUDSID=f.audsid and p.addr=s.paddr and s.process='"$PID1"' order by p.spid;">>/tmp/runaway_forms.log
mailx -s "`hostname -a`: Runaway Form Processes" [email protected] </tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
fi
else
#if PID1 and PID2 are not equal or CPU% is less than 95%.
echo "No unique CPU hogging form processes found. Exiting...">>/tmp/runaway_forms.log
cat /tmp/runaway_forms.log
fi
If you have the same problem with some other unix and DB processes, the script can be easily modified and used.
But use this with thorough testing first (by commenting out <kill -9 $PID1> lines.
Good luck.
Edited by: R12_AppsDBA on 19/04/2012 13:10

Thanks for sharing the script!
Hussein

"up and running no message processing until now"

Hi,
I am doing a multiline scenario with File Content Conversion. In Adapter Monitor, Message is processed in the sender CC and in the Receiver CC it shows "up and running no message processing until now"
Whats mean by this ?. What is the status of my message ? Where I can monitor the message send from sender communication to the Receiver communication channel (If not in SXMB_MONI ?)
Thanks,
Ram

hi,
check adapter message monitor:
http://hostname:portnumber/MessagingSystem/monitor/monitor.jsp
you should see all message over there
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Best way to control and run multiple (up to 20) processes independantly in LV

Hi all,
I'm trying to build an application in LV to independantly control and run multiple (up to 20) processes, ie, it should be able to start and stop any of the processes at any given time. What would the best way to code for this? Off the top of my head would be to use a unique notifier to control each of the process, but I'm thinking that the code upkeep may be a handful with this number of notifiers being defined. Are there better ways of doing this?
Appreciate any help and insight on this.Thanks a bunch in advance!
Solved!
Go to Solution.

I forgot some more important questions:
How large is your development group?
How much "discipline" do you want to program into the Process Commands framework? For instance, is it OK for any VI to command a process into a certain state, or should your program generate a broken wire or run-time error if a command is sent from a non-authorized source?
Where do your needs fall on this spectrum: simplicity that gets the job done and the product out the door and will probably not need much maintenance or upgrading, or flexible framework that will likely undergo multiple upgrades or fall into the hands of multiple developers?
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Parallel running of process and Roi?

Hello,
i have two questions:
1. how can i run two process in parallel in labview,which one process is webcam that stream video,and the other process is image snapshot from the video
(i want to snapshot an image after selecting a ROI from the live camera view and to keep the camera view live).
2. how can i choose that ROI will be the entire image frame?
Solved!
Go to Solution.

Hello,
Below I've attached an example program that implements something similar. It uses an event structure to listen when to snap and save and image while performing an IMAQdx grab. I'm unsure if you are trying to extract the ROI, however you should be able to modify the event structure to perform processing on the image instead of saving it to file. If you are looking to extract an ROI, I recommend you look at Extract Example.vi that ships with Vision Development module. You can find it by going to Help»Find Examples... then navigate to Toolkits and Modules»Vision»Functions»Extract Example.vi. It uses a Get Last Event Invoke Node to listen when an ROI is placed then passes the Image to IMAQ Extract. For your application you could implement something similar to my attachment. Have one loop grabbing images then place the Get Last Event Invoke Node for the image display in a parallel loop to perform the ROI extraction and post processing. You probably wouldn't need an event structure for this. Notice a 2nd IMAQ Create.VI is used in both examples to create a memory space to hold the image for processing/saving.
If you desire to programmatically set the ROI to the whole image, it may be easier to just clear the ROI using a property node and just pass the image as normal for post processing. What ever processing you want to performwill automatically be applied to the whole image.
Regards,
Isaac S.
Applications Engineer
National Instruments
Attachments:
SnapForProcess.vi ‏25 KB

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1

I have Macromedia Fireworks 3.0 and the install process doesn´t run! After the installation the message is: fireworks cannot run. the resource files are missing or damaged. I use Windows 8.1. Antworten auf Deutsch wären super!

As far as I know there is no download resource for older Macromedia programs and it is highly unlikely that one as old as version 3 of Fireworks will be able to work on a Windows 8.1 system. I was unable to get a Studio 8 version installation on a Vista system, and likely even an XP system (cannot remember that far back).

Why can't we change and activate a process chain while it is running?

why can't we change and activate a process chain while it is running?

Hi.........
Yes u can activate the changed PC...............but don't schedule it...........
If u schedule the Chain............when the current chain is running..............it will get stucked in the process..............which was executing ........at the time when it was scheduled.............
I thnk u hav made some chainges in the PC in Planning mode.............right...............Activate it............after the completion of the current run of the chain............schedule the chain........
Regards,
Debjani.........

Process full DWASDataBase run and run

Hello everybody,
currently I have a problem with the Data Warehouse of SCSM 2012 R2. All cubes are not processed, the date of the last process is in the year 1699 (!!). If I manually run the process full in the DB DWASDataBase it runs and runs for hours and does not show
any status.
In the event log there are warnings from DW every hour:
Message : Cube translations were not added or updated in the DWMaintenance run.
This is most likely because a cube was processing at the time of the execution of this workitem.
This is an intermittent problem and will resolve on its own as the DWMaintenance jobs continue to run.
BatchId: 15876
I already have run many scripts, one of them is this script here
http://blogs.technet.com/b/thomase/archive/2012/08/27/data-warehouse-jobs-keep-failing.aspx. But the script also run and run for hours.
I would be happy if anybody can give me a hint how I can fix this. Thanks!!

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

How to find out BPEL process server is up and running?

Hi All,
We are invoking a synchronous BPEL process from our application.
Incase of any network failures, we want to switch to other flow.
Is there any way to find out the BPEL process server is up and running?
Thanks,
Uma.

Try accessing the dynamic wsdl (http://server.com:7777/orabpel/default/service/1.0/service?wsdl)
from your application. If there's no error opening this page using http get, the server is alive :)
Marc

When my ipod connect to computer,windowss want me to format the ipod,and when the process is running suddenly windows said"unable to format this disk"and my ipod can't connect to itunes. anyone can help me?

when my ipod connect to computer,windowss want me to format the ipod,and when the process is running suddenly windows said"unable to format this disk"and my ipod can't connect to itunes. anyone can help me?

Check the iPod Hardisk, with DiskDiagnostic as posted here by tt2
https://discussions.apple.com/message/17776595#17776595
It wont fix your problem, but help us both, in troubleshooting, and reducing frivolous suggestions.
If your report says high Realloc or Pending Sector, then it's time to have your hardisk replaced.
Have a nice day!

Whenever I shut down iTunes on my computer, it keeps reopening and I have to go into Task Manager and end the process in order for it to stop doing this. I am running it on a Windows 7 Home Premium 64 bit machine.

Whenever I shutdown iTunes on my computer, it keeps re-opening and I have to go to Task Manager and end the process in order for it to shutdown.

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Help trying to get the F_ApiWinConnectSession initialized and running in the background.

Fellow FM Developers,
I have the FDK8 and have been using framemaker as a processor of templates. We have successfully written a program that uses the framemaker in a user account currently logged in. In other words, USER A logs in with their account on Computer A and processes files just fine. Now, we would like to set up a system where jobs are submitted by USER A and runs on a remote Computer B which processes the document and saves it as a PDF.
We want to make it so users can submit a job through a web service using the .NET framework. We have tried to do this, however we are failing on one crucial part of our development. I am trying to use the single most important (asynchronis) connectivity line:
F_ApiWinConnectSession( NULL, NULL, &ClassID );
This is because we want to have framemaker start in the background with this execution of this service. Unfortunately, without the GUI available this command fails. We have obviously created a Progid and it has been registered in the registry. We did this by runnning :
FrameMaker.exe /progid:FrameMaker.Automation.2 /auto
Can anyone help me with trying to get framemaker to run in a background. Is there a way to process the documents without have the GUI up and loaded and then have it process the document.
Your help is greatly appreciated,
Adam

Adam,
The server license is more tuned to the type of output that you are creating, regardless of the number of users. If you are creating content from external sources and generating a PDF in an automated way via FM, then you need a server license (period).
Read your FM EULA carefully.
2.2. Limitations on Server and Network Use. You may install one copy of the Software on your Computer file server for the sole purpose of downloading and installing the Software onto other Computers within your internal network up to the Permitted Number, provided that the total number of users that are permitted to download and install the Software from such Computer file server, does not exceed the Permitted Number. Except as explicitly described above, no other network or server use is permitted under this license, including but not limited to, using the Software either directly or through commands, data or instructions from or to any other Computer, for internet or web hosting services or by any user not licensed to Use this copy of the Software through a valid license from Adobe. For the avoidance of doubt, this Agreement does not permit the Software to be Used in any batch-oriented environment where such Use of the software is to produce Postscript or PDF output from data originating from any other application, unless such Use is merely incidental to a Use clearly permitted by the license.To obtain rights for additional server, batch oriented or network licensing uses, you may purchase a license(s) for the FrameMaker® Server product. The FrameMaker Server product license is available for review at, http://www.adobe.com/products/eulas/main.html.
This has greatly impacted the database publishing side of things. If all of your content is completely created in FrameMaker, then you should be ok. However, if you create or get any content outside of FrameMaker and pass it through FM to make your documentation sets, then according to Adobe, you need to be using the FrameServer product (for creating the PDFs).

Pcast in registry and runs in process

Similar Messages

Maybe you are looking for