PCL custom Payslip not aligned after 12.1.3 upgrade

Hi,
We have upgraded our TEST instance from 11.5.10 to 12.1.3, everything looks ok except for our custom payslip. We get a print out and the data looks good except for some reason the print seems to be a couple of characters out to the left and everything is one row higher then it should be.
I have checked the print drivers on the servers (between TEST and PRODUCTION) and they are identical. Our PRODUCTION 11.5.10 instance is printing correctly still. Also checked printer set up in apps system manager->Install and everything is identical.
Does anybody know if something to do with PCL printing has changed in the upgrade which i need to check?
Thanks
Chris

Hi Amit,
Did yoy apply all pre-req. patches? If yes, then please log a SR for this issue.
Thanks,
Hussein

Similar Messages

Field width alignment after 2006 to 2008 upgrade

Field width alignment after 2006 to 2008 upgrade
I've noticed that after upgrading from 2006 to 2008 all of the textarea type fields are no longer being displayed the same way they used to be. In the 2006 version I would create text fields with a width of 50 and textarea fields with 37 columns, which would end up being displayed in the browser as the same width. After the upgrade all of the textareas are smaller in width. I tried changing the width of one to 50 and that made it match the width of the text field. If a change was made to make it easier to keep the widths of different field types aligned, that is great for building future services, but I don't want to have to go update every service across every environment to make the forms display properly. Has anyone else run into this?

Tylor,
Here's the scoop directly from the man who runs our UI team.
In 2006 we had a bug where the field sizes specified for “text” and “textarea” fields were rendered as different sizes. Therefore the customer would use a field with 50 for “text” and 37 for “textarea”. This has been fixed in 2008. So, in 2008 if 50 is specified for “text” and “textarea”, the rendered versions of these are aligned.
To solve the problem two approaches can be taken.
#1. Update all “textarea”

My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

Welcome to the HP Forums MillaMagia,
I see by your post that the USB isn't being recognized.
I can help you with this issue.
Are you using the same USB cable? (known good USB cable)
You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
USB 3.0 are supposed to be backwards compatible.
Try another USB port on the Laptop, some of the USB ports are more powered then others.
I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
How do I get into Windows Device Manager?
Here is a document for Identifying problems in Windows Device Manager.
Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
Let me know how it was listed. (screen shots welcome)
If this is a Laptop then check the power management settings.
Access the device manager. Windows 8-How do I access the Device Manager.
Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
Disconnect the USB, run the full uninstall and reinstall the printer software again.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

IMessage not working after iOS 5.1 upgrade! Feedback pls

iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

You shouldn't have to hard restart and it shouldn't have anything to do with your router. If anyone else runs into this problem try resetting the network settings on your phone. All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
Edit: Some of us don't have the option of resetting our DNS servers. I run my own for example for caching purposes.

Battery #2 not present after windows 8.1 upgrade

battery #2 not present after windows 8.1 upgrade. I am using sony vaio laptop model VPCZ2390X

Hi aalmoeen,
Thank you for visiting Sony Community!
I assume your computer has an extended battery pack, right? Are you using a genuine Sony battery packs? Please follow these steps to isolate the issue:
Power Cycle
Turn off the laptop -> push and hold the battery off button for 5 seconds located on the bottom of the laptop. (You may use safety pin).
Remove the battery pack and install it once again. Test the laptop again.
Remove the battery pack -> push the battery off button -> install the battery pack once again.
Reset BIOS
Run Vaio update and Windows update.
Make sure you have the updated drivers and software, check on eSupport website.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Hope these steps help.
Thanks,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
Any alternative sir?

GPS not working after froyo 2.2 upgrade

I upgraded to froyo 2.2 yesterday and since then my GPS won't work. The only way I can get it to work is to turn GPS on, power off/on my phone, then the GPS will work when the phone is first powered back on. If I turn off the GPS off and then try it again later, it won't work again. I don't normally leave GPS turned on because it drains the battery too fast, but now I have to restart my phone any time I want to use GPS?!?!?

OK. Not just me then. I have 3 Fascinates since last Sept. First couple months, none of the 3 GPS would work.
Then after first verizon patch/upgrade, all 3 worked better. Then after 2nd and finally 3rd EA28, GPS worked
GREAT on all 3 phones. Been working great since the EA28 upgrade.
Yesterday, 2 of the 3 got their Froyo 2.2 upgrade.
Now, the GPS on both of them quit working again. They either never get a signal lock or take over 20 minutes to get one
and IF they do, its a once a day event.
The one that didnt yet receive its 2.2 update, its GPS is still working fine. ( though I'm sure it will quit post update as well).
Since all 3 worked great last 4 or 5 months, I can only assume the gps radios in all 3 are fine and this is some kind
of Android bug. ( i've seen similiar posts in other forums for other phones after gettting various android updates. )
So, $64,000 question for Verizon, Samsung or whomever: How do I fix this now and keep it fixed ??
( I've cleared all cache data I can find, turned off/on, removed battery turned off/on ...Nothing helps on either phone.)
I have not yet tried a 'factory reset' , though I could on 1 of the 2 phones.
Thanks.

Where did my notes go after my mountain lion upgrade?

I just upgraded to mountain lion. I'm not using the cloud yet. I opened notes on the dock and it's empty. Where did all of my notes go after the upgrade. I really need that information Can anyone help me find my notes and get them into the new notes folder.
Thanks, ervernon

I found that the iPhone appeared to have finished syncing, but in fact the apps were still being copied back to the phone from iTunes. If you wait a while (with the phone connected to your computer), you may find that they just keep appearing. Mine took about 30 mins.

IPad keyboard not responsive after iOS 7.1 upgrade

I have an iPad Air and upgraded to 7.1. After upgrading my keyboard became almost non-responsive. It literally takes several seconds for a keystroke to appear on the screen. I have tried this in several apps with the same result.
I reset my iPad Air and restored from my backup. No change to the keyboard behavior. Also tried resetting all settings and that did not work either.
I also upgraded my iPhone 5 to 7.1 and am not experiencing this problem.

I have the exact same problem on my iPad Air. Every keystroke takes up to 10 seconds to register. I have not tried any resets or restores yet.
I'm using the norwegian on-screen keyboard. If I change to english while the keyboard is displaying, the stutter/lag/freeze disappears.
@Shing If you're also using a localized keyboard, can you check if the problem disappears when changing to the english keyboard?

A1: Home button not working after Ideapad A1 ICS upgrade

So yesterday I finally tried the ICS upgrade for my Ideapad A1. It worked OK besides all data on internal memory and SD being deleted so I had to reinstall all my apps or restore from Titanium backup.
In any case the only real problem is that the home button is not working after the upgrade. Does anybody else have this problem and maybe even a solution?
Thanks!

Hi, Im using A1 16G and tried to upgrade to ICS for couple of days i read too many articles in different forums....
Can you put any instruction on how you made it?
Thanks

Power key not working after few hours of upgrade to Lollipop

Please, i need urgent assistance as the power key/button on my device isnt working. I can't switch off the device and it worries me cos this started few hours after i performed the upgrade to Lollipop.
Urgent response would be highly appreciated.

Hi,
Unfortunately, it's not much more that you can do as troubleshooting than the software repair that Thommo mentioned. If there still are no reaction when pressing the ON/OFF button after a software repair, it sounds more related to a hardware issue that needs to be examined by a technician at an authorized service center. You can contact your local support team for further information about nearest service center and/or how to proceed with this in the best possible way:
http://support.sonymobile.com/global-en/contactUs/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Custom application is not working after the support package upgrade.

Hi SDN Folks,
I have upgraded the portal from SP09 to SP25 successfully. But after the upgrade our custom application is not behaving as before. When we submit anything in the custom page its returning to home page. No error in the log files also.
Custom application is a devoloped in webdynpro java.
Kindly suggest.
regards,
Mahesh.N.R

Hi Sita,
Currently I canot take help form the developers, please let me know where i ca checkwhether the custom URLs are set to home page.
regards,
Mahesh.N.R

ITS custom Theme not working after upgrade EHP7

Dear Experts,
We previously created changed the standard theme SL and changed the html templates GENERATOR and GUI_CUA and we also added mime objects for logos and header. It was working fine untill upgrade but after upgrade it is not bringing hte custom theme, instead it is bringing the standard theme.
My page was like below before upgrade:
Now the page looks like below after upgrade:
Below are the parameters maintained in SICF for service:
~TRANSACTION    zva01i
~GENERATEDYNPRO    1
~WEBGUI    1
~COOKIES    0
~NOHEADEROKCODE    1
~THEME    sl
~WEBGUI_THEME    sl
~NO_ITS_HEADER    1
~WEBGUI_SIMPLE_TOOLBAR    34
~WDSKIPSPLASHSCREEN    1
I am new to ITS and I am unsure on what to do. could someone help me resolve this issue.
Thanks,
Naveen

After the upgrade of our systems, the ITS server was not recognizing a few of the things like styling and the linking. So we just published the following core services again:
ITSMOBILE
SYSTEM
ITSGENMOBILE
ITSGENMOBILE4
ITSGENMOBILEXV
and everything fell into place.
If everything else looks fine and is in place, you may try the above.
Regards,
Utkarsha

The customer themes not working after installing support package.

Hi,
In a Web dynpro ABAP aplication that i made in a project, we have a customer theme. We transported the development of a new host that had a higher level of support package, and it has stopped working properly the customer theme. We´ve gone from 7.0 sp 9 to sp 20. Well, when you run the programa WD_THEMES, in the ALV appeared to me not the customer theme. So I exported the standar themes and with Eclipse, I´ve copied and re-created the customer theme by modifying the latter.
Once changed, I try exporting to the test environment and it is here that the level of support package was sp18. I could not import it because the version was not the same.In the development environment was 7.0.19.1 and in the test environment was 7.0.15.1.
The question that comes to me is when we have a customer theme in a environment and upgrade the level of support package, is the version of all themes listed in the program updated or only the standar themes?. If this is so, if we upgrade the level of support package we will have to re-export the standar themes, copy one of theme and go back to redo our theme, right?.
Thanks and hope your answer.

Hi Karthik,
Let me clarify on "Not working"
It showned synchrozation successuffly but no data transfer between client and middleware and vs. For instance, the user never receive any new work orders, or their times never got transfered back to R/3. Even though, there is no error on the client.
It appear that step 1-4 are required otherwise, you get ABAP Runtime error (using ST22):
Runtime Error          CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          02/07/2007 08:12:27
After we performed step 1-4 but there were data transfer between client and R/3. The only way to get it working, we had to delete client and re-assign MAM 2.5 back to each users.
No, we didn't apply client patch SP19. We are still using SP16.
As we speak, everything is working because we had to re-assign MAM 2.5 for every users. but I hope we don't have to do this next time we apply another Support Package.
Thanks.
Dai Ly

PCL custom Payslip not aligned after 12.1.3 upgrade

Similar Messages

Maybe you are looking for