PDA Folder Directory Listing

Hello List,
In an attempt to minimize typing for the PDA User, I would like to show a list of files located in a particular folder or let them select a file name while browsing.
I know how to accomplish this using LabVIEW; however, the PDA Module does not seem to support List.VI and some of the other "browsing" tools. In fact, I would be able to capature the file name if I could force some type of a browse event similar to what occurs using the simple "File Dialog" in LabVIEW.
My objective is to let them select files (about 15 characters in length) without having to manually enter them with stylus, which can be time consuming.

It can be done through API calls, however, I tried several times to build a DLL out of it for PDA but couldn't get it to work (compile). NI really need to simplify the process to call native API functions.
-Joe

Similar Messages

Read Directory Listing of a password protected Folder

Hello all,
I am using an Intranet, and I want to read the directory listing of a password protected Folder, which is located onto an other computer.
Thanks
Geotos

hello,
in the VI below is a small example. It uses the command line to map a share and log in a user, reads the mapped drive or the network-path and deletes the connection.
matthias k
Attachments:
NetListDirectory.vi ‏35 KB

Get directory listing or files contained in a folder which is placed on a s

Hello,
I want to get the directory listing of a particular folder say 'xyz' which is placed on the server.
I am using tomcat. I want to use Http to do it. How do it do it.
Please guide.
Regards,
JAVA_student

JAVA_student ,
as pointed out file list is (in productional environments) usually turned off for security reasons.
But I had a similiar requirement to the one you posted. I had a directory with thousands of image files with the name pattern <id>.jpg and the id's stored in a database. Not for every id in the database there existed a file. I wanted to show an image or in case the image file did not exist a default jpg. I could not set the error pages in web.xml to do it.
So I had to take the id (a parameter in the request to the servlet I wrote for that), had to concat it with the 'virtual' directory name used in the applicationserver for the img directory. Then I had to check the existance of the file and to load it it and display it, if it existed otherwise I had to load and display the default picture.
The problem is similiar to yours as the problem basically is to map a directory in a web application to a real directory in a filesystem (which works for files and directories.
The answer is use getRealPath(String) of the ServletContext-object.
Note: This only allows access to files and directories in the web application.
e.g.
http://www.theserver.com/mywebapp/img/ is a folder containing img files. The server does not allow directory listing.
In a jsp within the application mywebapp you want to show a list of the files in /mywebapp/img/ .
<HTML>
<BODY>
<%
// in a jsp application gives you access to the context
String sRealPath = application.getRealPath("/img") ;
java.io.File fDir = new java.io.File(sRealPath) ;
java.io.File[] allFiles = fDir.listFiles() ;
for (int i = 0 ; i < allFiles.length;i++) {
String sName = allFiles.getName() ;
%>
<%=sName%><br>
<%
%>
</BODY>
</HTML>

Very slow network directory listing - but fast data transfer speed once listed?

Hello,
I have really tried to sort this myself before opening up to the community, however I have run out of ideas, and hope someone can offer the magic solution I have missed.
I am currently using the 3.4ghz i7 iMac on a 1GB LAN, running OSX10.7.2 - connecting to a Windows Server 2008 (Running Release 2) over ethernet.
If i go to a network directory that i haven't recently accessed it can take up to 60 seconds to show the contents of that directory. Once i have accessed that folder, if i come out of it and go back in it will be instant again - but the first time it lists the directory it looks like i have opened an empty folder - which after anything from 10seconds to 1 minute will suddenly show the files that are there.
Internet connectivity is fast through the network, and file transfers across the LAN are fast. (showing as approx 300mb per second) I can play and edit HD content across the network with no slowdown so I am confident that this issue is not related to the network speed itself, and is more to do with a setting on this mac.
Symptoms are very similar to this post: https://discussions.apple.com/message/12245148?messageID=12245148&amp%3b#1224514 8 - however i understand that in OSX Lion - SMB was removed - so i cannot find this file to edit.
I have tried bypassing additional hubs in the network by wiring direct cables to the switch that is connected to the file server, this made no difference.
I have also tried disconnecting the ethernet cable, and running over wifi. This fixes the listing problem, but when editing HD content over a network drive, this connection is not fast enough to carry the data without interruption (some projects are linked to up to 900gb of hd video content!)
Using ethernet, I have tried DHCP, DHCP with manual address, and manual mode. All reproduce this problem. i have tried using the windows workgroup, and tried without it.
I have also followed this suggestion: https://discussions.apple.com/thread/2134936?threadID=2134936&tstart=45 and used OpenDNS. this did not fix the issue.
For argument sake, I have also just tested a Macbook Pro running Snow Leopard to see if it was OS related. This reproduces the exact same problem, near instant directory listing on the wifi, a long and arduous wait on ethernet.
I cannot work out why directory listing is instant over wifi, but not over ethernet on 2 different macs, running 2 different versions of OSX. I also do not understand why if the network is having trouble listing the directories - the data transfer speed is 300mbps when i copy files across the wired network from the file server to the mac.
Does anyone have any other ideas as to what could be the problem here? We are about to start work on a very large project, where the content we are editing is spread out across around 200 different network folders (different shoots captured over the past 2 years). We really don't have the time to wait 60 seconds each time we need to access one of those directories to look for a file, and I am very close to pulling all my hair out!
I really look forward to hearing from anyone who can offer any insight.

If you are suspecting that the Windows update had something to do with your LAN going slow, then try the following:
1. Look for updates for your clients LAN NIC driver; or
2. Un-install the updates.

How to apply style sheet (.css) in Weblogic directory listing

Hi,
We are migrating a directory listing application from Apache to Weblogic.
Earlier we did this by Apache httpd.conf entry like below :
<Directory "/opt/apache/httpd-2.1.9/htdocs/Myreportfolder">
IndexOptions FancyIndexing FoldersFirst NameWidth=* XHTML
IndexOrderDefault Descending Date
IndexStyleSheet "/css/style.css"
</Directory>
/opt/apache/httpd-2.1.9/htdocs folder has all it's usual resource files.
We were able to see documents in "Myreportfolder".
Now we have moved to Weblogic and using virtual directory mapping as below and we are trying to achieve the same thing:
<?xml version="1.0" encoding="UTF-8" ?>
- <wls:weblogic-web-app xmlns:wls="http://www.bea.com/ns/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://www.bea.com/ns/weblogic/weblogic-web-app http://www.bea.com/ns/weblogic/weblogic-web-app/1.0/weblogic-web-app.xsd">
- <wls:container-descriptor>
<wls:index-directory-enabled>true</wls:index-directory-enabled>
<wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by>
</wls:container-descriptor>
- <wls:virtual-directory-mapping>
<wls:local-path>/Myreportfolder</wls:local-path>
<wls:url-pattern>/*</wls:url-pattern>
</wls:virtual-directory-mapping>
<wls:context-root>/getreports</wls:context-root>
</wls:weblogic-web-app>
We are able to view the reports but we do not get look-and-feel of Apache like directory listing.
but we encounter below issues:
1) File/Folder icons are not visible - we want to use style sheets in http header from the response that is returned from weblogic server
2) Filename is limited to 29 characters when it is showing
3) Files are not sortable as Descending order - we sorted using tag <wls:index-directory-sort-by>LAST_MODIFIED</wls:index-directory-sort-by> but the latest file is shown at the last
We are thinking that Weblogic must be having some configuration like Apache httpd.conf where we can apply style sheets (css ).
We would appreciate af anyone can provide better insight into the issue.
or is it possible to extend weblogic.servlet.fileservlet class to serve this purpose.
Thanks & regards,
Rabi

Hi Vikash,
Check the below links which will you idea on the same.
Stylesheet for WDA without integrating in SAP Portal
Apply custom css to WebDynpro application
Thanks
KH

Front end directory listing

Question:
Trying to create a page that displays a directory list of a folder content.
Don't want to use the literature module...
Would like to create a folder where I easily can upload files (ftp) and create a menu link that displays the folder content as a list using my master template and css ...
The files in the list should be available for download.
Any suggestions on how to achieve this?
Answer:
This is not possible on BC. You can display a folder view and links to all the content in it. You'll have to upload your items and create a page with links to those items.

That's a server message. Means what it says.

Directory listing from my OS X 10.5.8 server into a text file

Does anyone know how I can get a directory listing from my server, which I can put into an Excel Spreadsheet?
Thanks

Download the free TextWrangler and drag the enclosing folder into it. Alternatively, open the AppleScript Editor in the /Applications/Utilities/ folder, paste the following in:
do shell script "ls -AR " & quoted form of POSIX path of ((choose folder) as alias) & " >> ~/Desktop/inventory.txt"
and run it as is.
(104088)

Directory Listing from Web

Hi All,
I am trying to populate a menu with a list of PDF files from
a particular folder. I've got this working perfectly for a local
path using the FileXtra4 xtra, but I'm stumped with getting a
folder from the web. I've tried the Buddy Web xtra, but it returns
an empty list when I use:
fileList = bwFileList("
http://www.awebsite.com/stuff/",
Maybe I could embed a Flash Movie and have Flash pass the
list to Director?
I'm using Director and Flash MX 2004
Any help much appreciated
Thanks guys,

Hi,
I'm not sure about Buddy Web xtra (I've not used it), but you
have a couple of other options:
1. Use the excellent free and for absolutely no sane reason
depreciated MultiUSer Xtra to create a network connection with an
ftp server and use standard ftp commands to get a directory
listing. see
http://www.lingoworkshop.com/Testzone/FTP_Client_Test.php
2. Use getNetText to ask a server-script to return the list
of files. This is probably the safest but is dependent on the
server (example php script attached).

How to Submit Directory List on Dmoz and Yahoo

Hello Friends
I want to submit business directory of my company on Dmoz-directory. Share the best suggestions to post directory list on Dmzo and
yahoo directory

Go to your Utilities folder and open DirectoryAccess. You may have to click the padlock and authenticate as an administrator. Next Click on LDAPv3 and click the Configure button. If the add DHCP supplied... box is checked, uncheck it. Click OK and you're done. If not, you may have to click the triangle next to Show Options to view the configuration. Once the configureation is displayed, click on it then click the delete button. You may have to authenticate again, and you may need a network admin password to do so. That should do it.
hth
Jeff

Folder Directory Create

I recently Migrated our sharepoint from windows 2003 to 2008. In doing so I lost Cold fusion and a directory Wizard, This wizard was put in place to create a folder directory out on our network drive when used. Now I have Coldfusion 10 installed on my new sharepoint server, I have brought over all of these directory wizard files but it still does not work. Its like I am missing a certain link in the chain here. Can anyone shed some light on the topic?
The wizard opens up to the first page, which it says next to continue. You would select a company which the code is written to pull a companies list from the network drive, then it creates a folder directory with files in the on that network drive. Now when you lick the initital next button it buttons and takes us to a The website cannot display the page. I still have all the original code files, placed into the same exact directory on the sharepoint server. The sharepoint server is an identical match, but its like somewhere something isnt lined up correctly.
I also have downloaded Coldfusion builder also.

OKay since page 1 actually doesnt do anything I can skip that, and ill start on page 2 and the other esential code files that actually build the directory.
DIRECTORY.CFM
Unable to Determine Parse Mode!
The validator can process documents either as XML (for document types such as XHTML, SVG, etc.) or SGML (for HTML 4.01 and prior versions). For this document, the information available was not sufficient to determine the parsing mode unambiguously, because:
in Direct Input mode, no MIME Media Type is served to the validator
No known Document Type could be detected
No XML declaration (e.g <?xml version="1.0"?>) could be found at the beginning of the document.
No XML namespace (e.g <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">) could be found at the root of the document.
As a default, the validator is falling back to SGML mode.
No DOCTYPE found! Checking with default HTML 4.01 Transitional Document Type.
No DOCTYPE Declaration could be found or recognized in this document. This generally means that the document is not declaring its Document Type at the top. It can also mean that the DOCTYPE declaration contains a spelling error, or that it is not using the correct syntax.
The document was checked using a default "fallback" Document Type Definition that closely resembles “HTML 4.01 Transitional”.
Learn how to add a doctype to your document from our FAQ.
No Character encoding declared at document level
No character encoding information was found within the document, either in an HTML meta element or an XML declaration. It is often recommended to declare the character encoding in the document itself, especially if there is a chance that the document will be read from or saved to disk, CD, etc.
See this tutorial on character encoding for techniques and explanations.
Using Direct Input mode: UTF-8 character encoding assumed
Unlike the “by URI” and “by File Upload” modes, the “Direct Input” mode of the validator provides validated content in the form of characters pasted or typed in the validator's form field. This will automatically make the data UTF-8, and therefore the validator does not need to determine the character encoding of your document, and will ignore any charset information specified.
If you notice a discrepancy in detected character encoding between the “Direct Input” mode and other validator modes, this is likely to be the reason. It is neither a bug in the validator, nor in your document.
↑ Top
Validation Output: 27 Errors
Line 1, Column 1: no document type declaration; implying "<!DOCTYPE HTML SYSTEM>"<HTML>
✉
The checked page did not contain a document type ("DOCTYPE") declaration. The Validator has tried to validate with a fallback DTD, but this is quite likely to be incorrect and will generate a large number of incorrect error messages. It is highly recommended that you insert the proper DOCTYPE declaration in your document -- instructions for doing this are given above -- and it is necessary to have this declaration before the page can be declared to be valid.
Line 3, Column 11: cannot generate system identifier for general entity "I" <TITLE>C&I Engineering - Project Directory Wizard</TITLE>
✉
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&" (even inside URLs!). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and æ are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
Line 3, Column 11: general entity "I" not defined and no default entity <TITLE>C&I Engineering - Project Directory Wizard</TITLE>
✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 3, Column 12: reference to entity "I" for which no system identifier could be generated <TITLE>C&I Engineering - Project Directory Wizard</TITLE>
✉
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
Line 3, Column 10: entity was defined here <TITLE>C&I Engineering - Project Directory Wizard</TITLE>
Line 10, Column 21: there is no attribute "TEMPLATE"<CFINCLUDE TEMPLATE="HEADER.CFM">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 10, Column 33: element "CFINCLUDE" undefined<CFINCLUDE TEMPLATE="HEADER.CFM">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 11, Column 45: invalid comment declaration: found name character outside comment but inside comment declaration
✉
Line 11, Column 1: comment declaration started here
Line 12, Column 35: element "CFINCLUDE" undefined<CFINCLUDE TEMPLATE="MAINAREA.CFM">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 16, Column 3: invalid comment declaration: found name character outside comment but inside comment declaration--->
✉
Line 14, Column 1: comment declaration started here<!---
Line 20, Column 28: there is no attribute "HEIGHT"<TABLE WIDTH="100%" HEIGHT="100%" BGCOLOR="#D4D0C8">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 24, Column 21: there is no attribute "ACTION"<CFDIRECTORY action="list" DIRECTORY="\\ci-data\shared\PROJECTS"
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 24, Column 38: there is no attribute "DIRECTORY"<CFDIRECTORY action="list" DIRECTORY="\\ci-data\shared\PROJECTS"
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 25, Column 10: there is no attribute "NAME"    NAME="myDirectory"
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 26, Column 10: there is no attribute "SORT"    SORT="Name ASC">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 26, Column 20: element "CFDIRECTORY" undefined    SORT="Name ASC">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 27, Column 15: there is no attribute "NAME"<CFPARAM NAME="SELECTEDDIRECTORY" DEFAULT="">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 27, Column 43: there is no attribute "DEFAULT"<CFPARAM NAME="SELECTEDDIRECTORY" DEFAULT="">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 27, Column 45: element "CFPARAM" undefined<CFPARAM NAME="SELECTEDDIRECTORY" DEFAULT="">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 31, Column 17: there is no attribute "QUERY"<CFOUTPUT QUERY="myDirectory">
✉
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
Line 31, Column 30: element "CFOUTPUT" undefined<CFOUTPUT QUERY="myDirectory">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 32, Column 12: "TYPE" is not a member of a group specified for any attribute<CFIF TYPE IS "Dir">
✉
Line 32, Column 15: an attribute value literal can occur in an attribute specification list only after a VI delimiter<CFIF TYPE IS "Dir">
✉
Have you forgotten the "equal" sign marking the separation between the attribute and its declared value? Typical syntax is attribute="value".
Line 32, Column 15: element "CFIF" undefined<CFIF TYPE IS "Dir">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 33, Column 8: an attribute specification must start with a name or name token <CFIF "#NAME#" IS "#UCASE(SELECTEDDIRECTORY)#">
✉
An attribute name (and some attribute values) must start with one of a restricted set of characters. This error usually indicates that you have failed to add a closing quotation mark on a previous attribute value (so the attribute value looks like the start of a new attribute) or have used an attribute that is not defined (usually a typo in a common attribute name).
Line 33, Column 8: element "CFIF" undefined <CFIF "#NAME#" IS "#UCASE(SELECTEDDIRECTORY)#">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 35, Column 9: element "CFELSE" undefined <CFELSE>
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 54, Column 40: element "CFINCLUDE" undefined<CFINCLUDE TEMPLATE="ACTIONBUTTONS.CFM">
✉
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Frameset" document type to get the "<frameset>" element),
by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead).
by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
Line 57, Column 7: end tag for "CENTER" omitted, but its declaration does not permit this</BODY>
✉
You forgot to close a tag, or
you used something inside this tag that was not allowed, and the validator is complaining that the tag should be closed before such content can be allowed.
The next message, "start tag was here" points to the particular instance of the tag in question); the positional indicator points to where the validator expected you to close the tag.
Line 7, Column 1: start tag was here<CENTER>

How to avoid directory listing in java web applications.

how to avoid directory listing in java web applications.
That is on typing the url of the application it should not the directory listing. Welcome tag in web.xml doesnot fully solve the problem, since still the images folder etc is still accessible

I know of two ways.
If you're using tomcat and have access to the conf directory.
Edit your $TOMCAT/conf/web.xml. Find your default servlet properties and change
<servlet>
    <servlet-name>default</servlet-name>
    <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-class>
    <init-param>
      <param-name>debug</param-name>
      <param-value>0</param-value>
    </init-param>
    <init-param>
      <param-name>listings</param-name>
      <param-value>true</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>to <servlet>
    <servlet-name>default</servlet-name>
    <servlet-class>org.apache.catalina.servlets.DefaultServlet</servlet-class>
    <init-param>
      <param-name>debug</param-name>
      <param-value>0</param-value>
    </init-param>
    <init-param>
      <param-name>listings</param-name>
      <param-value>false</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>And restart your server. This will affect every directory on the server, and return a 405 directory browsing forbidden error.
Another way, is to place an index.jsp inside each directory with a simple one line redirect to your applications CONTEXT_PATH.response.sendRedirect("http://yourserver/yourapp/");This will only affect specific directories which contain these index.jsp files.
Hope this helps

Remote System Directory Listing/Navigation in JTree

Hi
I want my Remote System(Linux) directory listing to be available in a JTree. I need some help on implementing the same. Also How do i constantly get the directory structure of the remote system.
Thanks in Advance

http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html
http://en.wikipedia.org/wiki/Model-view-controller
How you get the data depends on how you access the server. Maybe FTP.

How do I populate an array with a directory listing.

I have a web site that has its photos updated by another person using a content management system that I have written. As Dreamweaver does not know about these extra photos, if I try to
syncronise the site on my machine for backup purposes, Dreamweaver downloads all 5000+ photos, and this can take upwards of 12 hours if there are no breaks in the connection.
So I am trying to write a page that creates an array of the existing files on the remote site. It will then do the same on my local site, and by comparing the arrays, will make a list of the new files, and then download these, which will save a lot of time and bandwith charges.
First I have to read the directory list, using the code below which reads and echos it on screen.
However, I cannot work out how to populate the required array.
<?php
    try
    {          /***photo directory ***/
        $it = new directoryIterator('../web/thumbs');
        while( $it->valid())
              /*** echo if not a dot directory ***/
            if( !$it->isDot() )
/**** Array creation code needs to go here I think.***/
echo $it->current()."<br />";
     /*** move to the next element ***/
                  $it->next();
    catch(Exception $e)
        /*** echo the error message ***/
        echo $e->getMessage();
?>
This creates a list of files and displays it on the page.
How do I store it in an array?
Howard Walker

Although not the solution you were looking for, consider the following:
Click the icon in DW for "Expand to show local and remote sites." Arrange the remote image directory by "Modified date," Then select all the recent images and GET them.
I find the above method good enough for occassional synchronization. I also simply ignore broken image links on the testing system.
If the above is not a solid enough solution, perhaps someone else will write your array function for you. I don't have the time.

How to get a directory listing in XE?

So how would you best get a directory listing?
There was a lovely thread about using dbms_scheduler to make external calls:
Re: External procedure calls supported?
Which discussed how to run an external prcoedure. So using that technique would an approach be:
create procedure get_dir(p_dir varchar2)
--get sequence for directory call
--call 'synronous dbms_scheduler that executes "ls -l > /tmp/listing[sequence]
--create external table temp_dir_[sequence]
--load it into a global temp table ala ASKTOM http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584
--drop the external table
Someone on Asktom said they were going to do it via dbms_pipe but was not forthcoming with an example.
I'm not sure I like creating and dropping an external table every time this procedure is called and I feel I am missing a technique (or a good idea) to make this work effectively.
Kind Regards,
James
Got the link to the 'External procedure calls support' wrong.
Message was edited by: jcrockart

Ok.
Well here is the solution... Can I make it better?
FROM OS (oracle user):
vi ~/get_dir.sh
#!/bin/sh
ls $1 > /tmp/$2
exit 0
##end
FROM SYS:
create directory OS_TMP as '/tmp';
grant read,write on directory OS_TMP to hr;
grant create table to hr;
FROM HR:
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
--create the following:
CREATE OR REPLACE procedure get_dir_list (
p_directory     in varchar2
IS
l_jobname VARCHAR2 (100);
BEGIN
     l_jobname := DBMS_SCHEDULER.generate_job_name (prefix => 'get_dir_list');
     dbms_output.put_line(l_jobname);
     --dbms_output.put_line('ls '||p_directory||' > /tmp/blah');
     --creat syncrhous job
     DBMS_SCHEDULER.create_job (
          job_name => l_jobname,
          job_type => 'EXECUTABLE',
          job_action => '/home/oracle/get_dir.sh',
          number_of_arguments => 2,
          enabled => FALSE,
          comments => 'directory listing for '||p_directory);
     DBMS_SCHEDULER.set_job_argument_value (l_jobname, 1, p_directory);
     DBMS_SCHEDULER.set_job_argument_value (l_jobname, 2, l_jobname);
     -- Run job synchronously.
     DBMS_SCHEDULER.run_job (job_name => l_jobname, use_current_session => TRUE);
     -- Remove job after run
     DBMS_SCHEDULER.drop_job (l_jobname);
     --create external table
     execute immediate '
          create table '||l_jobname||'_ext
          file_name               varchar2(1000)
          organization external (
          type          oracle_loader
          default     directory os_tmp
          access parameters (
               records delimited by newline
               fields terminated by '',''
               missing field values are null
               file_name)
          location ('''||l_jobname||''')
          reject limit unlimited';
          execute immediate '
          INSERT INTO DIR_LIST(FILENAME) select file_name from '||l_jobname||'_ext
END;
--test it
exec get_dir_list('/home/oracle')
GET_DIR_LIST14
PL/SQL procedure successfully completed.
hr>select * from dir_list;
FILENAME
apex
apex_3.0.1.zip
get_dir.sh
go.log
go.txt
test.sh
6 rows selected.
hr>
Apologies for butchering Dietmar Aust dbms_schedule example.
I can't drop the external table as the data in the global temporary table will be lost, so I will have to periodically clean up after this procedure.
Please somebody feel free to give me the one line solution ;-)
Regards,
James

Directory listing of a Multi volume encrypted tapes on OpenVMS 8.3

I have a full data backup for an openvms 8.3 server integrity server on two tapes that are encrypted. If I mount the first volume and try to do a directory listing the process goes on indefinately; without giving any output and eventually I have to kill the process. e.g. DEV_DAISY> sh dev mk Device Device Error Volume Free Trans MntName Status Count Label Space Count CntPLUTO$MKC200: Online 0 DEV_DAISY> mount PLUTO$MKC200: dat801%MOUNT-I-MOUNTED, DAT801 mounted on _PLUTO$MKC200: DEV_DAISY> dir PLUTO$MKC200:[000000] The process goes on indefinately at this point of time. However If I mount the second volume and do a directory listing, It executes and gives me the required output as : Directory PLUTO$MKC200:[]DAT801.BCK;1 294976 31-MAR-2015 00:00:00.00Total of 1 file, 294976 blocks. I want to ask is it possible to do a directory listing on first volume. If not is it possible to read tape header information (i.e saveset name and date on which backup was taken) from the first volume without specifying the encryption key.

I have a full data backup for an openvms 8.3 server integrity server on two tapes that are encrypted. If I mount the first volume and try to do a directory listing the process goes on indefinately; without giving any output and eventually I have to kill the process. e.g. DEV_DAISY> sh dev mk Device Device Error Volume Free Trans MntName Status Count Label Space Count CntPLUTO$MKC200: Online 0 DEV_DAISY> mount PLUTO$MKC200: dat801%MOUNT-I-MOUNTED, DAT801 mounted on _PLUTO$MKC200: DEV_DAISY> dir PLUTO$MKC200:[000000] The process goes on indefinately at this point of time. However If I mount the second volume and do a directory listing, It executes and gives me the required output as : Directory PLUTO$MKC200:[]DAT801.BCK;1 294976 31-MAR-2015 00:00:00.00Total of 1 file, 294976 blocks. I want to ask is it possible to do a directory listing on first volume. If not is it possible to read tape header information (i.e saveset name and date on which backup was taken) from the first volume without specifying the encryption key.

PDA Folder Directory Listing

Similar Messages

Maybe you are looking for