Pdf reader that will let me print the current page number to stdout ?

I'm looking into annotating my readings, and it'd really speed things up if I were able to get the current page number printed to stdout.
I've been through evince and xpdf's manuals, the latter will let you output the file to ps, so there might be some hacking possible there, but maybe there is a more convenient alternative...?
Would appreciate some suggestions.
Cheers !

Sure that works, it's just that I'm already wrapping my pdf reader in a ruby script to allows me to make annotations linking back to the original document and page, and I also use the clipboard to quote.
So instead of being a keybinding away, I end up have to juggle with windows...

Similar Messages

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? is there a cable i can connect to another mac that will let me transfer the file?

The circuit of my macbook is dead yet the hard drive is fine. I need to access a file from the hard drive, how can i do this? The mac turns on the screen freezes as bright blue. Is there a cable i can connect to another mac that will let me transfer the file?

There is another option if the Macbook will start up in Target Disk Mode.
Restart the computer while holding down the T key. If you see the firewire symbol moving around on the screen you can connect this one to another one in TDM. You will need a suitable cable to connect the two Macs.
http://support.apple.com/kb/ht1661
Firewire symbol:

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

I need to install iWork 09 so I can open the many pages document files that will NOT open under the new pages 5. Mavericks will not accept an install from my iWork's 09 CD. How do I get around this?

Hi, I'm helping StringSinger2 with this problem.
The previously installed version is Pages 3.0.3 (the same as from iWork 08). This version (Pages 3.0.3/iWork 08) is incompatible with Pages 5.
That is why it would be helpful to install iWork 09, which is the version between the two. It will open the older 08 files, and its saved files are readable by the new Pages5.
SO...
When I try to install iWorks 09 from my retail DVD the error message is "the installer is damaged". (I know the dvd is good, I installed iWorks09 to my laptop today.) Is the "installer" part of the system files? And - If that is damaged is there a patch for that?
Many Thanks!

How to you reference the current page number and total pages in a script?

I'm trying write a small script to make field invisible when the current page equals the total number of pages, but with no luck.
Can anyone advise how to do this?
I've tried various ways to reference my fields, this being the most basic:
if(pageNumber == totalPages) {
continuedBase.presence = "invisible";
// pageNumber has a run time property as "Current Page Number"
// totalPages has a run time property as "Number of Pages"
// continuedBase is a text field within the same subform as pageNumber and totalPages
Thanks for any help offered.
Russell

If you are asking how to get the current page and total pages you acn use these commands:
current page ----- xfa.layout.page(this)
total pages ------ xfa.layout.pageCount()
so your code woudl look like this:
app.alert("The curent page is: " + xfa.layout.page(this));
app.aler("The total number of pages is: " + xfa.layout.pageCount());
if(xfa.layout.page(this) == xfa.layout.pageCount()) {
continuedBase.presence = "invisible";

How do you create a login page using dashcode for the iPhone's mobile safari that will transfer you to the next page?

     Hey I have created a login page in Dashcode for a mobile safari app (aka iphone web app) and I am having trouble since I can not find any useful info about multiple pages. I don't want to use a stack layout view because it is only a login page and I need to check with a database to make sure the user's login info is correct. Right now I have it set up so that it loads another iphone web app project once it validates the info.
     The only problem with this is I am having a good bit of trouble trying to pass values from my php code to javascript or html. For some reason calling the javascript inside the php code makes the actual code inside the app not be called and same with the echo statment for the html.
So I would like to be able to create the app in this way:
Login page > PHP > MS SQL > PHP > UNKNOWN (if I can't get the javascript or html to output both) > Secure info on the next page
     I believe It would be a lot easier if I had the option for a multiple page but instead I am having to load up an entirely new dashcode project. If anyone knows a better way please let me know. Or if anyone knows a link to good information on passing values from php to javascript, because I couldn't get any of the code I tried to work, I would really appreciate it.

Addendum to previous reply:
OK. This is weird--but I should be used to that, and just grateful that it seems to work (for now).
What I had done is FTPd some image files to my site using Filezilla, but when I had tried to access them, I was unsuccessful. I am almost sure that I used the same url (and variations of it) as you suggested, namely,  http://mysite.verizon.net/username/filename , and it either did not work, or gave me the "Page under construction", or, in some cases asked me for my username and password.
But, when I did it this time, it worked. So I probably had something off, but I can now do what I want.
By the way, if you'll permit another question, while on the site-builder site, it said that there was a "Web Photo Manager", and said that "To download the Web Photo Manager: Open the Site Builder application and go to the All My Sites page. Click on the Web Photo Manager link (listed under Advanced Building Tools )." I can't find it--would you happen to know where it is?
In any case, thanks a lot for all your help--it solved my problem.

For some reason every time I start Firefox I get a window to print the current page. Am I the only one this happens to? Is there any way to get rid of it? It just started with the previous update.

When I start Firefox, the standard print window comes up as if I had clicked on print under the file menu. I close the window without problems, and it doesn't show up again until the next time I start Firefox. When I click on print under the file menu, I get the print window without any problems.

See:
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then easiest is to download the full version and uninstall the currently installed version and remove the Firefox program folder to do a clean install of the new version.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

How do I install the plugins that will let me print from CS5?

Right now I'm going to PSE 7 to print files edited in CS 5. It's a pain in the neck. I'm unfamiliar with installation of "plug ins" and Bridge does not have the flexibilty I want in printing.

It is the Appstore App. You don't need to download it, it is already there. It is the "A" in a circle.

Adobe reader 9.4.2 only print the first page, although «Send for each page» in advanced settings.

This is under Mint 16 for a Pixma iX 6550 printer
Linux 3.11.0-12-generic
Cups 1.7.0

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Can I print the last page of a PDF document using command line?

Hi
I am in a situation in which I constantly have to deal with multiple PDF documents and I need to print the last page in each of these, and ONLY the last page. The total number of pages will vary for each file, so the page number for the last page will also vary.
I would really prefer to not do this manually, by opening up each file in the visible Adobe Reader window and then print.
Question:
Is there a way with Adobe Reader (maybe with the help of some other Adobe product) to print only the last page of a PDF document using some kind of command line without opening up the PDF file in the visible Adobe Reader window?
I'm using Windows.
Thanks in advance,
Regards,
Emil

Thank you for taking the time to reply.
I tried both ways and neither works. It gives me a prompt box that I have to click "next" for every page but after going thru all pages, nothing is sent to the printer.
Also, all directions I've read indicate it will print to the default printer. If my default printer is on a network, will that cause problems....
and...
should I be getting a prompt box on every page? I thought all this would happen behind the scenes and not force me to interact with every page.
dc

How do i print the current view on a pdf file

How do i print a current view on a pdf file i am looking at, i dont want to print the current page i want to zoom in and print that zoom.

Dansyacht wrote:
Shift-Option 4 with allow you to capture a portion of the screen (the area you want to print) with the mouse.
Shift-Cmd 4 lets you select a portion of the screen
Shift-Cmd 3 takes the entire screen (no selection necessary)
There is a "hidden" setting accessible from the command line ("defaults" command) to change the default screenshot format from png to pdf. Since I always forget the command, I use the free TinkerTool to access/change that setting and others. Screenshot format is found in TinkerTool under "General".

Used to be able to print multiple page pdf files on my HP 7310 all in one and then it stopped and would only print the curent page. This is tedious for long PDF docs. I am on 10.6.8 .

Used to be ablert to print multiple page pdf files on my HP 7310 all in one printer and now I can only print the current page and therefore it takes forever printing them one by one. I am in version 10.6.8. Tried printing as image using the advanced click and that did not work either. I have Adobe 9.0 reader installed.

I tried this earlier, and I tried it again today. Both times it said "Software Missing!" and "HP Software required to connect to your printer over the network could not be found on this computer." But when I tried to install the software (AIO_CDB_Net_Full_Win_WW_130_141.exe, which I downloaded from HP's web site), it wouldn't install, as described above. In the diagnostic utility, I clicked "skip", and it said "Connection Verified!", and "The printer is connected to the network and the services related to the network connections have been verified and reset to a normal operating state. Everything appears to work fine at this point. Please doa test print to verify that the issue is resolved or click Skip to move to the next step." I clickedthe "Test Print" button, and immediately it popped up a box that said "Test Print Failed."
I tried again to install the HP software, and it installed, detected the printer, and asked me to select it. I selected the printer, clicked "next", and it did its network diagnostics. Then it said "Problem(s) found with your network" and "Problem(s) may exist with the network functions of your printer . . ." I continued the installation without connecting to the printer. Then I ran your network printer diagnostic tool again, and got the same result - "HP Software required to connect to youir printer over the network could not be found on this computer."

Free program that I can download that will let me change pixel colors in a photo or image

I not sure what community and category I should put this in, but I am looking for a free program that will let me manipulate the color of pixels in a photo or image. Any suggestions? Thanks Randall

Software Mac OS X Lion 10.7.5 (11G63)
Memory 3 GB 667 MHz DDR2 SDRAM
Processor 2.16 GHz Intel Core 2 Duo

How to report current page number to the browser...

I need to dynamicaly attach a script in a bunch of PDF files. The script will be attached when the user requests the document and the document will be embeded in the page like this:
<embed id="PDFObj" src="test.pdf" width="100%" height="100%">
I have a JavaScript in my webpage with a message handler:
var PDFObject = document.getElementById("PDFObj");
PDFObject.messageHandler =
onMessage: function(aMessage)
    switch (aMessage[0])
      case "_pdf_PageOpened":
        alert("!_pdf_PageOpened!\n" + aMessage[1]);
        break;
I'm using hostContainer.postMessage on Page/Open event and it works just fine when the event(action) is manualy attached.
My question is:
How to attach the Page/Open event on every page in the PDF file using script that runs on Acrobat Reader?
In Acrobat Pro I can use Doc.setPageAction() but it doesn't work in Acrobat Reader that is embeded in the browser window.
OR
Is there any other way to report the current page number to the webbrowser for an embeded PDF?

Hi,
to get the current page, you can use the index of your master page ("Restricted").
$ = $.parent.index +1
and for the total pages use
$ = $layout.pageCount()

Pdf reader that will let me print the current page number to stdout ?

Similar Messages

Maybe you are looking for