PDF report viewer Axtivex Control

Its an Urgent,can any one please suggest about a PDF report viewer Axtivex Control that is compatible with VS2005.That report viewer should be compatible with both 32 bit and 64 bit Windows operating system.And it should be freeware.

I have problem with Windows Vista Os in 64 bit.The problem is that i have a webbrowser control in Windows application in VS2005 for displaying PDF file.Its working fine in 32 bit operating system.The PDF file is shown within the control.But when i deploy the application in 64 bit Vista operating system,its give an error and the pdf is open in new window.Please can you provide any PDF viewer control that is free and compatible with VS2005,so that pdf should open in that control and is compatible with both 32 bit and 64 bit OS.

Similar Messages

Crystral reports viewer activex control 11.5 - export to pdf - misaligned

good morning
i have been advised to post here for a better response
i have a slight issue im trying to get an answer for with crystral reports viewer activex control 11.5
when exporting data from the report on screen to pdf, everything is mostly ok except for some lines which are not correctly aligned with everything else
when i do a print instead to software such as primopdf, the alignment is fine, its exactly as it looks on the onscreen report, howeverm primopdf is unable to print the whole report due to a control error & it also takes far too long exporting the data out of crystal reports
obviously, getting the activex control export to pdf working is the preferred option, else why bother using it
has anyone else had similar issues & what did you do to resolve?
i wouldnt be suprised if the answer is simply to update to the latest version
Thank You & Regards,
Matteo Vinci II GradOIEAust
SD Innovative Solutions

Well, perhaps not the latest version, but certainly the latest Service Pack would be the place to start. For CR XI r2 (11.5), the latest SP can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006255422008E/crxir2_sp4_inc.exe
If that does not help, have a look at [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d3639373635463644364636343635334433393339333832363639373635463733363137303645364637343635373335] kbase.
Now, the above was created for CR 10.2, so the registry for CR XI r2 is:
HKLMsoftware usiness objectssuite 11.5crystal reports.
You may have to create the "Export" folder and PDF folder so that this looks as:
HKLMsoftware usiness objectssuite 11.5crystal reportsexportpdf
Now, Right-click the pdf sub key and click New > DWORD Value. Name the DWORD value "ForceLargerFonts" and set it to the value of 1.
Restart IIS, and try the application again.
If this does not help, let me know if this is a web or a win app.
Ludek

Hidden Report Viewer Confiugration Error on aspx pages that use report viewer web control

I try to fix the problem. The error below is embedded on aspx pages that use report viewer web control. Please note that the div element is hidden, and the reportviewer is displaying correct contents.
Div element hidden on aspx page
<div id="ReportViewer1_HttpHandlerMissingErrorMessage" style="border-color:Red;border-width:2px;border-style:Solid;padding:10px;display:none;font-size:.85em;">
<h2>
Report Viewer Configuration Error
</h2><p>The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> to the system.webServer/handlers section for Internet Information Services 7 or later.</p>
</div>
I tried adding the two elements to web.config, but to no avail.
Add below to system.web/httpHandlers
<add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
or add below to system.webServer/handlers for Internet Information Services 7 or later.
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
The required assemblies below are installed under C:\Windows\assembly folder. I have installed both Microsoft ReportViewer 2010 Redistributable, and 2008 SP1.
Microsoft.ReportViewer.WebForms, version 10
Microsoft.ReportViewer.Common, version 10
Below is the whole web.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration>
<connectionStrings>
<add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="car" value="myCar" />

</appSettings>
<system.web>
<httpHandlers>
<add verb = "*" path = "Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />

</httpHandlers>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="Microsoft.Build.Framework, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
<add assembly="System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" />
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</buildProviders>
</compilation>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login.aspx" timeout="2880" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider" connectionStringName="ApplicationServices" applicationName="/" />
<add name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider" applicationName="/" />
</providers>
</roleManager>
<pages>
<controls>
<add tagPrefix="ajaxToolkit" assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" />
</controls>
</pages>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<httpProtocol>
<customHeaders>
<remove name="X-Powered-By" />
</customHeaders>
</httpProtocol>
</system.webServer>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="WebService1Soap" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:58269/WebService1.asmx" binding="basicHttpBinding"
bindingConfiguration="WebService1Soap" contract="ServiceReference1.WebService1Soap"
name="WebService1Soap" />
</client>
</system.serviceModel>
</configuration>
Any idea?
Update:
IIS is7.5, AppPool is Integrated.
I have tried below, none of them works:
1) Add it only to system.web\httpHanders. Changed AppPool to classic, still got hidden error.
2) Add it only to system.webServer\handlers. Integrated mode,still got hidden error.
3) Add both to both element. Integrated mode, still got hidden error.

Hi Kingofwebguru,
According to your description, when you use reportviewer control, you got the error message: The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file.
To troubleshoot the problem, please refer to the following steps:
Click Start, click Run, then type InetMgr.exe and click OK.
Click plus sign next to server name to expand it.
Click Application Pools in left pane.
In Application Pools list, click DefaultAppPool.
In the Actions pane, in Edit Application Pool section, click Edit Settings to check the Pipeline mode.
Configuration settings for the HTTP handlers are specified in the system.web/httpHandlers element and the system.webServer/handlers element. of your application Web.config file. The handler specified in system.web/httpHandler is used by Internet Information
Services (IIS) 6.0 or IIS 7.0 in Classic mode, whereas the handler specified in system.webServer/handlers is used by IIS 7.0 in Integrated mode. To use IIS 7.0 in Integrated mode, you must remove the HTTP handler in system.web/httpHandlers. Otherwise, IIS
will not run the application, but will display an error message instead.
For more information about Web.config Settings for ReportViewer, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms251661.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.
Wendy Fu
TechNet Community Support

Crystal Report Viewer ActivX Control into an SAP Form

Hi
I need to show an Crystal Report Viewer in a SAP form This code show an blanck from.
I know that only ATL activX are supported by SB1, but I dont have more information about the Crystal ActivX.
Dim oFormTST As SAPbouiCOM.Form
Dim oCreatP As SAPbouiCOM.FormCreationParams
oCreatP = oApp.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
oCreatP.UniqueID = "TEST"
oCreatP.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
oCreatP.FormType = "TESTFtype"
oFormTST = oApp.Forms.AddEx(oCreatP)
Dim oItemX As SAPbouiCOM.Item
Dim oActivX As SAPbouiCOM.ActiveX
oFormTST.Height = 400
oFormTST.Width = 400
oItemX = oFormTST.Items.Add("TEST01", SAPbouiCOM.BoFormItemTypes.it_ACTIVE_X)
oActivX = oItemX.Specific
oActivX.ClassID = "CrystalReports11.CrystalReportViewer.1"
Dim oRep As CrystalDecisions.Windows.Forms.CrystalReportViewer
oRep = oActivX.Object
oRep.ReportSource = "E:\DevLoc\App\bin\FICHETECH.rpt"
oItemX.Height = oFormTST.Height
oItemX.Width = oFormTST.Width
oFormTST.Visible = True
Some one as an idea ?
Thks

Vishal,
I would like to let you know of an SBO addon that we have created called CrystalWave. This addon integrates Crystal reports with B1. This might save you a some time trying to recreate the wheel. Please take a look at the following link:
http://www.twbs.com/CrystalWave.html
YOu can download a fully functional copy at http://www.twbs.com/selectcwversion.html
This will work only on the SBODEMO_US company.
Let me know if you have any questions.
Gopal Viswanathan

Pdf report viewing problem using Sun appserver9

i want to generate a report from my web application.if i use appserver8.2 it can view report in pdf ,html and csv format.but when use appserver 9 it cant show the report in pdf format.message is shown as File is not a valid postscript document.i am using fedora core 4 and mozilla firefox.pls help someone

Hi user;
Please check below thread and related docs,suggestion
Re: Print pdf direct from concurrent manager
Re: How to print PDF file with hp-ux 11.31 on itanium
Hope it helps
Regard
Helios

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

How to hide the preview section in the crystal report viewer activex cntrl.

Dear All,
I am using the Crystal report viewer ActiveX to display the Crystal report. When the report opens in the Crystal report viewer ActiveX control, a preview section comes at the left hand side of the panel. How can I hide the preview section from the Report viewer control.Is it possible to customize the the report viewer control. Awaiting for your suggestions.
Thank you.
Regards,
Rahaneef

Just to get the terminology correct. I believe you are meaning the Group Tree(?).
Vb Code:
CrystalActiveXReportViewer1.DisplayGroupTree = False.
Also, do consult the developer help file;
C:\Program Files\Business Objects\Crystal Reports 11.5\Help\en\rdcsdk_com_dg_doc\doc\rdcsdk_com_dg.chm
Ludek

Issue With Report Viewer Version 11 On VS2012 & VS2013

I create a sample project on VS 2012 @ VS2013 and created a report with some static data . I am trying to print the Report generated through report viewer 2012, but it is throwing the following
"error An error occurred during printing. (0x80070006)".
I am trying to test this on Windows 8.0 and Windows 7. It is working perfectly fine on Windows 8 . The issue is only on windows 7.
Checked “Downloaded Program Files” folder. All the required files were existed.
Enabled Active X.
Please suggest me how i can resolve this issue in Windows7 ?.

Hi Arc Sam,
Please find the details information below:
You can install the control using the RSClientPrint.cab file... You can find this file in your VS installation at "\Microsoft Visual Studio 9.0\ReportViewer\". Below is a link to a related thread
which may help you:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
Similar thread below:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0501da39-0a27-4f61-81e0-7c6bb2c5a189/reporting-services-report-viewer-activex-control?forum=sqlreportingservices
Regards,
Swallow

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Print SSRS Server Report in landscape or portrait mode directly(without report viewer control)

Hello,
.Net 4.0\VS2010\C#\ssrs 2008 on Sql Server 2008R2
Having a problem printing a Server report while controlling the orientation and the size of the emf rendered to the physical page.
I have the report cutting off in both landscape and portrait modes. I'm passing the following deviceinfo to the render function:
string DeviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
return DeviceInfo;
string mimeType; string fileExtension; Stream pageStream = serverReport.Render("IMAGE", deviceInfo, firstPageParameters, out mimeType, out fileExtension);
No other settings seem to have an affect on controlling the output to printer or pdf. i.e. The deviceinfo params fed to server report's render function are all you get. I think my original code comes from an MSDN or CodeProject example. I'm not
inventing anything new here.
Links below indicate similar problems but they are looking at the issue from just landscape mode. Seems like I ought to be able to squash or expand the image to whatever size I specify, separate from the 'page' size. Please let me know what i need
to know to make these reports print without bleeding onto 2 pages or slicing off the right side of the document image.
http://stackoverflow.com/questions/25652415/cant-print-ssrs-rdlc-report-in-landscape-mode-directly-to-printer-using-suggest
https://social.technet.microsoft.com/Forums/sqlserver/en-US/06a9b432-c8a5-4952-a07c-867742a26c47/print-rdlc-without-report-viewer-either-in-portrait-or-landscape?forum=sqlreportingservices
print ssrs rdlc report in landscape mode directly
Thanks!

Hi
FraterJoanni,
Thanks for posting in MSDN forum.
I am not expert in SSRS. You should get better response in SQL Server > SQL
Server Reporting Services, Power View forum.
After take a look at the similar threads links as you posted above.
The conclusion is we needn’t tell the program o this report is landscape not portrait. If the width is larger than the height, the report will be printed in landscape; otherwise, it will be printed in portrait.
>>Links below indicate similar problems but they are looking at the issue from just landscape mode.
But in C# forum, we only from the point of code, code looks OK to me.
A similar blog talking about this
Controlling Page Size in a Reporting Services Report
And I have got the default page size in the US is Letter, 8.5in x 11in. In other parts of the world A4 (8.3in x 11.7in) is the standard.
65: //build the device settings (A4 8.3 × 11.7)
66: string deviceInfo = string.Format("<DeviceInfo><PageHeight>{0}</PageHeight><PageWidth>{1}</PageWidth></DeviceInfo>", "11.7in", "8.3in");
67:
68: //get report bytes
69: result = rs.Render(format, deviceInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
70:
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is there a report viewer control for html5 using javascript?

VS 2005,2008,2010,2012
SSRS-2008,2012
I want to be able to create a simple report viewer that will run on ios, android, and win8 devices.
I believe that the solution lay with the concept of HTML5 and javascript.
If I use aspx and vb also HTML5, then don't I run the risk of the target device not having the required .net lbrary?
Is that correct? Or does the server alone need the library? what about printing or saving as PDF options on the client side?
So is there a SSRS report viewer control that I can use to create a report that runs on any device that supports HTML5? I want it to look professional.
Or any technique or tutorial that I can look at to accomplish this goal?
Thanks
Jerry C

Hi Jerry,
To work around this issue, you can write .aspx pages using html 5 and use ReportViewer control or iframe to display the report. For more information, please see:
http://www.hanselman.com/blog/AnnouncingTheWebStandardsUpdateHTML5SupportForTheVisualStudio2010Editor.aspx.
Since the ReportViewer itself uses Ajax, if the mobile device doesn't support that, you're better use some type of front end code to pull data from a web service and render it.
Besides, according to the document
View Reporting Services Reports on Microsoft Surface Devices and Apple iOS Devices, to view and interact with a report on iPad device or Microsoft Surface device, there are several methods:
from Email subscription
from Windows Azure portal
from Report Server
from Report Manager
from a SharePoint document library
from SharePoint web part
So, it seems impossible to view report through Report Viewer control on mobile devices.
Reference:
http://forums.asp.net/t/1863129.aspx/1
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Can Grow Vertical Alignment Error in Embedded Report View, but not in .PDF

Hello,
I have seen postings about this issue before, but have yet to find a solution.
I am using Visual Studio 2008 w/ the basic version of Crystal Reports that is included.
I have a simple report that displays results of a stored procedure as rows across the report. One field can be of variable length, anywhere from 0 to 100 characters. Usually it's something reasonable (less than 40 chars), and so I have only given it so much width in the report. For when it is longer than that, I turned the "Can Grow" property ON, and set the Maximum Number of Lines property to 0.
When the report displays embedded in my Web Form, and this field's data is wider than the space I have allowed, it breaks the data down into multiple lines of the same correct width, as you'd expect, but those lines end up displaced vertically upward several rows, and print directly on top of other data from the above rows, make the report unreadable in that area (and quite ugly overall!).
If I export this report to a .PDF, it displays perfectly, without the vertical displacement error.
Anyone know what the official work is on this? Is there a fix or is this a bug?
If there is no fix, does anyone know how to direct the report to the .PDF file viewer, so the embedded report remains invisible (and thus hides the ugly error), but the user has the .PDF version to see? My client ultimately wants to export the report to .PDF, which I have already coded, but it does not open the .PDF Viewer, just saves the report to disk. However, if I use the Crystal built-in Export button, it first displays a pop-up asking which format to export to, then if .PDF is chosen and okay is clicked, the pop-up switches to contain the .PDF Viewer, and opens the report. In my user-defined export code, the .PDF is correctly created, but I am missing the step on how to open the .PDF Viewer.
Any ideas?

Thanks for the responses.
Jonathan, moving the field in question to its own details section (details B) did not fix the issue. The field in question is moved slightly down as its in a new details section with sits slightly lower than details A, but when it has to be broken up into multiple lines, the same issue arises, the field text is displaced vertically upward and sits on top of other data.
Ludek, I wanted to send the report to a .PDF Viewer in a new browser, and keep the original browser intact. I'm using code very similar to yours. To launch the new broswer I added this code to the Page_Load of my main browser:
btnViewReport.Attributes.Add("onclick", "window.open(Page.aspx', """", """", 'height=200,width=400')")
When the button is clicked the report is exported, and the new browser opens Page.aspx.
I use this code in Page_Load of Page.aspx:
        Dim webClient As System.Net.WebClient = New System.Net.WebClient()
        Dim buffer As Byte() = webClient.DownloadData("C:\Reports\Report.pdf")
        If Not buffer.Length.Equals(0) Then
            Response.ContentType = "application/pdf"
            Response.AddHeader("content-length", buffer.Length.ToString())
            Response.BinaryWrite(buffer)
        End If
Any other ideas on the original vertical displacement issue when using Can Grow, I'd still appreciate it.
Thanks,
Scott
Edited by: Scott Deltorto on Sep 23, 2008 10:15 PM

Crystal Report/STRUTS: Error (404) when clicking on Control Buttons (Print, Export, Next, Previous, etc...) on report viewer

Post Author: jwenny
CA Forum: Deployment
Need help badly!!!
We are using the crystal reports plugin for STRUTS.
We are able to display the report in the crystal report viewer. However, when we click any control buttons (print, export, etc...), then we get:
JSPG0036E: Failed to find resource /Report-viewer.jsp
We then moved Report-viewer.jsp to the WebContents folder (root directory) and got a different error when we clicked any control button:
Error: 400 page not found
Does anyone know how to solve this problem? For instance, is there a setting or parameter that needs to be set?
Greatly appreciate any help!

HI,
Whenever we print the viewer does an auto postback, I believe due to this some of the values are getting missed. Moreover we are referring to the viewer and reportdocument object, it seems. So can you try this simple code in an application to see if it helps:
ReportDocument rdoc = new ReportDocument();
rdoc.Load("C:\TASKECrystalReports\Intraday.rpt");
rdoc.SetDatabaseLogon("uid","pwd");
rdoc.SetParameterValues("parameter name","value");
CrystalReportViewer.ReportSource = rdoc;
Helps?
Thanks.

Crystal Report as PDF without Crystal Report Viewer

Hi,
i have a question to a Crystal Report document. The situation is, that i have a document in InfoView. If i open the Crystal document, it will be launch the Crystal Report viewer in the IE. The next step is to use the export function, to create a PDF Document.
Now, i would like to open a PDF Document directly, without the Crystal Report Viewer. How can i configuration that?
Thanks for help.

You could always schedule the report to PDF format, then when you clicked to view the Latest Instance, it would come up in PDF format.

PDF report viewer Axtivex Control

Similar Messages

Maybe you are looking for