Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Similar Messages

Exporting to PDF fails for a report

Hi,
One of my reports no longer exports to PDF. When run through our ERP system it looks as if it's exporting but the progress popup window quickly dissappears. When we go to the location where the exported file should be nothing is there.
I tried opening up the report in the Crystal 11 and exporting from there. I get the following two error messages:
Failed to export the report.
Not supported
This was working yesterday. The only thing I did was to add the u2lbar.dll to the bin folder and copy over the barcode font so that we could display barcodes on this report. However, even if I comment the line to do the barcode I still get the same problem.
Thanks,
Jon

The font you are using probably doesn't have embedding permissions.
hth,
- Ido

Export to PDF fails for FR - EPM 11.1.2

Looking at server noticed that the HRPrinters1-5 were created but going to non-existant directory d:\hyperion\...\pdfoutput\ Should be going to d:\oracle\middleware\...\pdfoutput. Had to delete hrprinters1-5, edit Oracle\Middleware\EPMSystem11R1\products\biplus\bin\hrcreateprinters.ini and hardcode the correct directory, run hrcreateprinters.exe in same directory, restart printer service, test export to pdf successful.

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
Please some one help on this

You need to try exporting the first half of the book.
If that exports ok then export the other half of the book.
Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
For example if your book is 128 pages long:
1. Export pages 1 - 63
2. If these Fail to Export then
3. try exporting1-32
4. If these Fail to Export
5. then try exporting1-16
If it doesn't fail (step 2)
Then export pages 64-128
and 64-90 etc.
until you find the pages causing the issues.

I need to make a pdf document, made in photoshop, 'page turn' and then add it to my website. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?

Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter

Adobe Premiere Pro CC launches for some users, but crashes for others.

I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
For these students, the following error appears:
Adobe Premiere Pro CC has stopped working
Check Online for a solution and close the program (Tried this nothing seems to come of it)
Close the program
I clicked View problem details
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: dvaui.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532bed86
Exception Code: c0000005
Exception Offset: 00000000002d31c1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 3272
Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
Additional Information 3: 3e22
Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
-Barb

I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Printer GPOs fail on some computers but work on others - error code 0x80070034

Hello, I have a couple of GPOs that roll our printers. They have been running smoothly for quite some time, then suddenly started giving our errors on our newer machines. Meaning, the GPOs will work fine on some clients but will not work on others. Also
all other GPOs work fine on all clients. The clients are similar Lenovo Windows 7 64-bit machines.
This is the error: Event ID: 4098, Group Policy Printers. The computer '123.123.123.123' preference item in the 'Deploy printers - {3F6DE6D0-86DC-4D1F-AB99-81BC07F23F3C}' Group Policy object did not apply because it failed with error code '0x80070034 You
were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup, choose another workgroup name.' This error was suppressed.
I turned every stone I could think of on the problematic machines but cannot find out a reason. I disabled anti-virus/firewall, I logged in as domain admin and I tried both user & computer GPOs. No luck. Notice that I can successfully connect manually
to the Printer shares (the ones used to distribute the drivers).
Domain is Win2008 R2. The printers "live" on a Win2012 machine and the drivers come from there. I am using Group Policy Preferences. Ideas are welcome.
Thanks
Christos

Hello and thanks for the suggestion. Yes the drivers are okay, all clients (working and not) run the same Win 7 x64. Let me summarize the situation:
- The GPO runs because the printer IP ports are created
- The Printer Shares (that distribute the drivers) are accessible because the printer is installed without any problems/warnings if I manually double click on them (the shares)
- Security prompts for driver installs are disabled
I also noticed the following. The error says "The computer '123.123.123.123' preference item in the Group Policy object ... etc" The IP mentioned in that error is NOT the computer/client running the GPO but the IP address of the target printer.
So the client thinks the Printer already exists or the IP is already taken (or something of that sort).
Here is the GPresult XML for this
<GPO>
<Name>Printers - deploy - user</Name>
<Path>
<Identifier xmlns="http://www.microsoft.com/GroupPolicy/Types">{5C21
1010-F5E0-445C-99F3-0B8A9D9CB680}</Identifier>
<Domain xmlns="http://www.microsoft.com/GroupPolicy/Types">mydomain.com</Domain>
</Path>
<VersionDirectory>34</VersionDirectory>
<VersionSysvol>34</VersionSysvol>
<Enabled>true</Enabled>
<FilterId>MSFT_SomFilter.ID="{6272C5C1-9C4E-40B7-BD5A-277ED70B337D}",Domain="mydomain.com"</FilterId>
<FilterName>Any Win Desktop OS</FilterName>
<IsValid>true</IsValid>
<FilterAllowed>true</FilterAllowed>
<AccessDenied>false</AccessDenied>
<Link>
<SOMPath>mydomain.com/Configuration/Sites/MainOffice</SOMPath>
<SOMOrder>3</SOMOrder>
<AppliedOrder>1</AppliedOrder>
<LinkOrder>4</LinkOrder>
<Enabled>true</Enabled>
<NoOverride>false</NoOverride>
</Link>
</GPO>

I have not been able to send email for some time but now i have stopped being able to recieve email.

i have not been able to send emails for some time but in the last two days ive stopped being able to receive, the message says 'username or password incorrect' ive checked all the settings, ive deleated accout and set up again, ive rebooted phone. i tried to sync with pc but this also fails any ideas

That is correct, They don't seem to know about Mac, never got a single scrap of help from them. Try recreating your account from scratch, delete the account, (write down all your settings first) and add an account, see if that works, and if it does, delete the first account to prevent things doubling up on you. I think that's what I did, it was quite a while ago. Hope this helps, or gets you pointed in the right direction. Maybe go to At&t and try creating another account, and if ti works, delete the first.
One other tihing I did was to reset Safari, as AT&T uses the net, that's about all I can remember, like I said it was awhile ago.

How to hide edit link for some rows in report? (according to value of col)

Helo,
How to hide edit link for some rows in report? (according to value of column)
regards
siyavuş

Hi siyavuş
You can do this by taking the edit link off the report and putting it into your report SQL.
Use something like Select CASE WHEN (condition) THEN
'Put your edit link in here as an html Anchor like<a href="(target)">Edit</a>'
ELSE
tt.value
END edit_link
FROM test_table tthope it helps,
Gus..
You can reward this reply (and those of other helpers) by marking it as either Helpful or Correct.
This allows forum users to quickly find the correct answer.
;-)

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

DPM 2012 R2 Backup job FAILED for some Hyper-v VMs
DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
(0x800423F3))
All the vss Writers are in stable state
Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
Host is 2012 R2 and The VM is also 2012 R2.

Hi,
What update rollup are you running on the DPM 2012 R2 server ? DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
Check for VSS errors inside the guests that are having problems being backed up.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

HT1555 i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC

I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free

Hi,
I have installed Photoshop element 12 trail version in my system and i worked also for some days but it given error that "cannot load default brushes because scratch disk is full " but scratch is 158GB free why whats the problem am not getting.

That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.

PDF Maker for Outlook is not installing or working. It shows as an inactive add in but I cannot activate it.

Help. PDF Maker for Outlook is not installing or working. It shows as an inactive add in but I cannot activate it.

You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility

HT1933 Can you help. I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received. I have contacted funzio the games creators and they have told me i need to contac

Can you help. I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received. I have contacted funzio the games creators and they have told me i need to contact Itunes direct. Is that correct

You can contact iTunes support via this page and see if they can help (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have been using Voice memos for some time but now I get a message to say No Microphone Available how do I get the function working again?

I have been using Voice memos for some time but now I get a message to say No Microphone Available how do I get the function working again?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Export to PDF fails for some reports, but report viewer works

Similar Messages

Maybe you are looking for