PE 9 and 10 Help PDF Invalid List View Descriptions

Bottom line: Has anyone reported on these problems, and, if so, what is being done about them?
Until proven otherwise, I believe that Premiere Elements 9 and 10 Help PDF requires editing of its List View Descriptions which are appropriate for at least version 8.0/8.0.1, 7, and 4, but not versions 9.0/9.0.1 and 10.  Please refer to the Help PDF Projects/View Clip Properties
for version 10:
http://help.adobe.com/en_US/premiere...B-312BB3F13B11
for version 9:
http://help.adobe.com/en_US/Premiere...355c-7f98.html
Problems in this regard for Premiere Elements later than version 8.0/8.0.1 and not for versions 8.0/8.0.1, 7, and 4:
1. List View Properties display in text for export video file, no Data Rate Analysis graphs
2. List View Columns, no ADD to add your own columns, so only Adobe built in ones, and none of the Adobe built in ones, like Client, allow for editable text.
Comments:
Data Rate Analysis
I had read somewhere that these graphs appear for tape based rather than non tape based imports. Mini test: Premiere Elements MPEG4.avi import and DV AVI export of the MPEG4.avi. Results: Version 8.0/8.0.1 Properties for import in text format (file properties) only and Properties for export in text format (file + export properties) as well as display of Data Rate Analysis graph. Versions 9 and 10 Properties for import (file properties) and for export (file + export properties), both import and export text only.
List View Columns
1. If I look at the project.prel WordPad documents and the Client Column information there in each, I do not see any difference.
2. If I create a Premiere Elements 8.0/8.0.1 project, set List View column choices Comments and Client, type in the comments and client information, and save/close/and re-open the project in:
a. Premiere Elements 9.0/9.0.1, the Comments columns and its information will not appear; the Client column will appear, but its information will not be editable. (The 9.0/9.0.1 version does have Client, but not Comments, as a built in choice under Edit Columns)....the latter might explain why no Comments column except...
b. Premiere Elements 10, neither the Comments nor Client columns and their information will appear. (The 10 version does have Client, but not Comments, as a built in choice under Edit Columns.)
One of the Potential Problems:
It is well accepted that, if you edit a project from an earlier version in a later version, you cannot go back to the earlier version for editing. So, one potential problem that I see in all this is the loss of this type of information on upgrading from 8.0/8.0.1 and earlier....
a. If you create a Premiere Elements 8.0/8.0.1 or earlier project which includes Comments and Client information in these List View Column choices, you will lose all that information in version 10 and have only non-editable Client information in version 9.
And, yes we have filed an Adobe Feature Request/Bug Form on this one.
Any comments about what I may have overlooked in trying to get those Help PDF List View Descriptions to work for me would be appreciated.
Thanks.
ATR

I definitely agree that the Help files could use some updating, Tony.

Similar Messages

  • Help !  The 'list view' for the Calendar app. on my Ipod touch is haywire..

    The 'list view' seems to be all wonky in Calendar on my iPod touch.
    The dates for a given day that's displayed don't make sense:
    i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
    Also, the 'events' given for each day listed don't make sense and are often duplicated.
    The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
    Has anybody experienced this ? Very frustrating, since I like the list view.
    I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
    Any help greatly appreciated.
    ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....
    ipod touch 16 GB 2nd generation iPhone OS 3.1 iPhone OS 3.1.1 (7C145)

    Attach the iPod and launch iTunes.
    Select it and goto Info tab / Advanced.
    Try using the "replace..." option and sync to see if it places the good data on there.

  • [HOWTO] Nautilus and mp3 metadata columns in list view (bitrate etc.)

    Hidden deeply in the wikipages, I just added a small howto on adding music metadata columns to nautilus's list view:
    http://wiki.archlinux.org/index.php/Gno … te_etc..29
    It allows for Album, Artist, Track Title and Bitrate Columns in list view mode. A feature I was missing from Nautilus.
    Credit to be found here:
    http://ubuntuforums.org/showthread.php?t=878683
    Posted here for all to enjoy.
    Last edited by stefanwilkens (2009-07-09 13:00:43)

    hello,
    searching for the same thing.
    what about using mutagen and python2-nautilus from
    the official repositories?
    can not run it succesful. any idea?
    thanks
       red

  • PDF Portfolio List View

    Is there a way to turn off the list view when making a pdf protfolio. I don't want the end user to see the file list.

    No, there is not that I am aware.

  • Article created via ARTMAS05 and M.C. Reference article - Listing View

    Has anyone ever encountered the following scenario and resolved it?  We are creating articles using ARTMAS05 IDOC.  We have reference articles assigned to the merchandise categories.  The reference articles have the Basic, Listing, Sales, Logistics Store and Logistics DC views extended.  The ARTMAS05 is created so as to extend all of those views when the IDOC is processed.   The created article has all the views extended, but  the Listing view is the ONLY view where  none of the values from the reference article are copied into the created article. 
    If I add the Listing view values to the E1BPE1MAW1RT (and RTX)  segement of ARTMAS05, they are passed to the article.  Yet, I don't have to do that with the other views so it does not make sense for us to do that. 
    I am very interested in learning whether or not there is a solution to this issue as nothing we do appears to fix this.  (Other than custom development.)
    Thank you.
    Dalia

    Hi Anisha,
    In IS-Retail, you need to maintain Logistics DC and Store View of Article Master.
    To overcome this, you have two options.
    1) Maintain  Reference article in Initial Screen of MM41
    2) Otherwise Maintain reference article for MC in WG21.
    You create one reference article with Basic View, Listing, Logistics DC and Store View Details.
    Use the reference article, while creating new Article master in MM41. Its not even required now to maintain Logistics Dc and Store View for New Article. For new articles system copy's the logistics details from reference article.
    Carry out Listing in WSM3 Tcode.
    Regards,
    Selvakumar. M

  • I'm brand new here and need help with invalid sim in 8120

    Hi. I just got an 8120 from someone on Ebay who said the phone was unlocked. I have AT&T and when this phone is powered on it says Cincinnati Bell - and at the top of the screen it says Invalid SIM... I'm guessing either its NOT unlocked or maybe its just an incompatible phone... any ideas?

    It sounds like you are absolutely correct.  It was probably not unlocked or elase it should work with any sim you put in.  There are a ton of sites to purchase the unlock code.  Try a google search, most of the codes will run you about $30.  You can also find sellers on Ebay that provide unlock codes.

  • PDF and Illustrator CC opacity mask.  The opacity mask displays perfectly in the print preview, and in the pdf document when viewed on my computer, but when printed the gradient opacity mask doesn't work.  Any suggestions?  Have not had this problem in ot

    Never had this issues in previous versions.  This IS a black/white gradient opacity mask over a black and white photo, but still don't think that is the problem.

    You may try the forum LiveCycle Designer.

  • How do I show what folders files are in in list view? MacGenius NO help.

    I recently went to the Natick Mall Mac Store to see a MacGenuis. I had two issues. The first was whether it is possible to view what files my documents and photos are in in list view, as I used to be able to view on my PC. The MacGenius tried to sell me a one-on-one lesson. When I asked how a lesson would help if it was not a possiblity, he told me to right click each document or photo to get that information. That is exactly the cumbersome, time consuming an inefficient process I was trying to avoid. I asked if he was aware of any third party software that could provide that function, and he said no.
    A little more research on my own shows that if you put your cursor on the item, the information shows up in the bar at the bottom of the finder screen. Not exactly what I was hoping for, but certainly more efficient and quicker than right clicking on each individual item, and I can at least toggle back and forth to compare documents and photos in multiple locations so I can delete those no longer needed without having to worry about doing an extra step and moving docs in and out of individual folders to re-consolidate them and delete uneccessary copies. (I have extras because I do legal work and have to keep copies of all items submitted in a single court filing together, but may need the same photos or docs in other court filings, which also have their own folders so I have a complete set of what was filed in each filing).
    Shouldn't the MacGenius have known about this function as an option for finding folders? He also told me I could not back up my computer on a disk I had previously used for a back up because the new back up would wipe out everything previously backed up.
    I also asked him about the whirling colored circle which I seem to be getting a lot of lately. He "checked" my computer and determined that I need a new battery (mine had slightly over 450 cycles, according to him) and my hard drive is failing. All could be repaired for a little over $300. I was told I could not do the repair myself, it had to be done by a Mac technician, and that the parts could only be purchased at the Mac store and they don't sell the parts except to Mac technicians.
    I was dubious, only because the MacGenius was consistently unhelpful and consistently tried to sell me items. I did stop and look at some PCs, figuring if my Mac was on its way out I would back up my docs and photos to a new PC and save a ton of time and money because I could consolidate on the PC which would show what folders my docs and photos were in - and use the PC for a backup drive until the Mac dies.
    I got Tech Tool Pro 6 and ran the diagnostics. All of which contradicted what the MacGenius told me, and gives me multiple options for backups without having to buy multiple backup drives for fear of having prior backups overwritten. So I don't need a new computer, I have an acceptable, altho less than desirable, way of telling what folders my items are in, and Tech Tool's optimization fixed the whirling "wait" cirle. 
    The only thing left is to ask if anyone has a hint or knows of software available that will in list (or other) view what folders my docs are in.
    Except to ask, has anyone else experienced such disappointing help and annoying upsell from a MacGenius? In all fairness, the few times in the past that I have been helped by a MacGenius, they were extremely helpful and didn't try to sell me anything (altho my computer was new and still under warranty).

    Customize the Finder window toolbar, adding the Path icon to it. Select an item and click on the Path icon or, as you already know, add path to the window. There's also copypath.app available via the App Store.

  • Disappearing of Web Parts and a custom List Views containing XSL

    Hello!
    Recently, on the sites with Web Parts
    containing XSL or on List Views (.aspx-pages) containing
    XSL a message appears:
    Unable to display this Web Part. To troubleshoot the problem, open this Web page in a Microsoft SharePoint Foundation-compatible HTML editor such as Microsoft SharePoint Designer. If the problem persists, contact your Web server administrator.
    Correlation ID:98bcff3d-5cc0-42b6-819c-41d36a4aa335
    And so it is as long as I do not take
    certain actions: indicated below as I
    struggled with this. In a day or two it
    repeats.
    Web Parts and List Views without XSL
    are displayed normal.
    Related LOGs for such Web Parts and List View containing XSL:
    Error while executing web part: System.IndexOutOfRangeException: Index was outside the bounds of the array.
    at Microsoft.Xslt.MethodCollection.ResolveMethodDef(Int32 tokenNum)
    at Microsoft.Xslt.MethodCollection.GetMethodInfo(Int32 methodNumber)
    at Microsoft.Xslt.STransform.GetCompiledTransform()
    at Microsoft.SharePoint.WebPartPages.BaseXsltListWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver)
    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
    Herewith:
    1. Updates have been installed on the server
    with a further rebooting.
    2. No doubt the correctness of XSL:
    previously these web parts and list views were displayed.
    And it is displayed in SP Designer.
    My actions for troubleshooting (a day or two
    it reappears):
    For Web Parts containing XSL:
    - Server rebooting does not help.
    - Resaving of Web Part settings
    helps (Web Part menu -> Change Web Part -> OK).
    - Sometimes resaving of Web Part settings does not help. In this case restarting of Application Pool 'SharePoint - 80' with further
    resaving of Web Part settings helps.
    For List Views containing XSL:
    - Server rebooting does not help.
    - Server updating with futher rebooting
    helps.
    - Restarting of Application Pool 'SharePoint - 80'
    helps.

    Hi,
    According to your post, my understanding is that Web Parts and List Views with XSL were displayed unnormal.
    The error message is caused by that the time allowed for doing the XSL transformation was exceeded.
    In SharePoint 2010 the XSL transform cannot take longer than 1 second.
    There is now a hot fix available from Microsoft to resolve this issue,  the solution are at this page:
    http://support.microsoft.com/kb/2639184. 
    In addition, you can install  sharepointfoundation2010-kb2597136-fullfile-x64-glb.exe and use the PowerShell
    script below to make the change to the Timeout value
    If the issue still exists, you can perform an AppPool recycle in IIS.
    More information:
    http://englando.wordpress.com/2012/01/05/unable-to-display-this-web-part-xsltlistview-and-xsltdataview-web-part-issues-in-ie/
    http://hsdhaarsma.blogspot.in/2013/06/indexoutofrangeexception-in.html#!/2013/06/indexoutofrangeexception-in.html
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to change to Icon View for some folders but and List View for the rest

    I've had a bear of a time with View options in my folders. I'd like some folders to be in Icon view and other to be in List view. For what ever reason if I change the view option of one folder it changes the view option of EVERY folder. What can I do to make this happen?

    I was about to ask the same. I'd like to use icon view normally, but list view for folders containing lots of text documents. It looks like the solution is using View > Show View Options, change the folder to the view you want, and then tick the box at the top fo the dialogue for "Always open in __ view".
    Message was edited by: Adrian Bolt
    Message was edited by: Adrian Bolt

  • Calendar List View MISSING in iOS 7.1 on iPhone 4S

    The old way to get list view was to tap the magnifying lens.
    Since 7.1 there is supposed to be a red button that toggles list view and month calendar + partial (smailler) list view.
    The icons for these are 3 lines for List View and a small rectangle with 2 lines under it for Month + List view.
    I only have Month + List view and never see the 3 line icon, nor can I find any way to get full screen list views of my calendar.
    Any suggestions welcome. Thank you.

    See this
    http://help.apple.com/iphone/7/#/iph3d110f84

  • How can I see my albums in list view on itunes 11.1.5

    I used to be able to see and sort my albums in list view.  With this latest release all I can find are my album covers.  I want to see them in text, and sortable by name, artist, etc as I can with songs.  I've checked Show List View for All Media in my preferences.  Thanks for any help with this.

    I believe the closest you can come is look at your songs in Songs.  There you can sort by albums.
    The album view does not contain a list view any longer.

  • Sharepoint 2013 Discussion Board Web Part, Subject line link on Home Page does not link to the list view

    I am by no means a SharePoint developer, but I really wanted to customize the discussion board for my site - so I found this link: http://www.codeproject.com/Articles/733164/How-to-create-HelpDesk-on-SharePoint-Online
    I added the columns, like the article said, and then completed the section "Modification of the discussion board views".  I skipped the workflow stuff because while I think it would be useful I wanted to make sure I could get
    the actual customization of the discussion board to work first. 
    My Problem (Just to preface - I followed the above instructions, including disabling the Minimal Download Strategy):
    When I clicked into my discussion board list, I was able to get it to look and function as described for both the subject and flat views. However, when I click on the Subject, from the Discussion Board Web Part on my Home Page, it does not redirect into the
    Discussion Board List Flat View.  Instead, it tries to open the root folder from the Home Page while still using the subject view.  The outcome being an empty discussion board on the Home Page.
    So I decided to create a whole new discussion board to see if that one would work, when I inserted a new Discussion Board Web Part into the Home Page, newly created from the app menu, it used the same custom JS file(plumTickets), even though I never linked
    the discussion board to the JS file. Of course when I went into the newly created Discussion Board list it opened as it does OOTB.
    I am so close it having this work like I have been envisioning.  I just need users to be able to click on a discussion subject from the Home Page and be redirected to the list view of the parent folder (I think that is the correct terminology,
    but it may not be) so they would be able to see any replies and be able to reply.  Please Help Me!!!
    I truly appreciate any help you are able to provide, thank you!

    I figured it out. I was using ?FilterField1=fieldname&FilterValue1=value on the URL to the page to pick out one project number. The web part I was trying to add was for a list that did not have that particular fieldname. I didn't realize that would matter
    since I was using the Connections -> Get Filter Values From to get my filter values from the main web part, which does have that fieldname.
    I added a field with that fieldname to the other list and set a workflow to copy the lookup value of the project number lookup field into the new field. Now all is working fine.  Sorry for the wild geese in my original question.

  • List View COLUMN organization does not stick

    i have been trying to organized the columns (left to right) so that, for instance, the size of the file and the pixel dimensions of the file show up right next to the name. i have been doing this in an Album (at least today) but i have not been seeing this "stick" as i seem to have to do it every time i open Aperture and need to see this List View in an organized way.
    can anyone help me with what i am not understanding here or what i am doing wrong?
    TIA

    i would like to take out everything except pixel size and file size and i am forgetting where this happens or what it is called.
    When you use View->Metadata Display->Customize,
    to select the columns to display in list view, as Frank Caggiano pointed out, you can also configure the display order of the list items. Just drag the items in the "Display order" pane into the order you want. And this order will stick between restarts of Aperture, at least it does this in my version. So use this panel to arrange the columns, rather than dragging the columns around.
    BTW: if you configure the display order also for the Browser view, and select to show the filesize and pixelsize first, in the metadata overlay, you can display the images with the filesize shown in the Browser.

  • (IOS 7) Any way to show calendar list view in notification center instead of day view?

    I updated to IOS 7 and I hoped to be able to check my schedule for the next day from the lock screen. Unfortunately at 1 AM the next few hours in the Calendar Day View in Notification Center was empty. The Today Summary just tells me when the first appointment is the next morning but not much else. Is there any way to change the calendar day view to the list view of appointments? Representing the relative times of the appointments with empty space seems like a waste. Especially when the Calendar Day View is 100% empty space and my appointments are just out of view in the wee hours of the morning.
    Thanks,
    Jerrill

    My biggest regret in updating to IOS 7 is the calendar. I often to tap from date to date and wish to see in LIST view my events... not in a today view as mentioned by the various posts above. As someone else noted, events are hiding below the screen view and one must scroll around to see if there are other events scheduled. I'm so afraid I'm going to miss something and make a committment in error. A list view is much more desired and efficient.
    Change for the sake of change...why Apple why?
    I have sent mass texts and Face Book messages to friends telling them not to upgrade to IOS 7 because of the calendar disaster and variouse other changes. Such as why is the font everywhere so small and light? One needs a magnifying glass to see everything that could be seen so clearly before. I've given friends a "tour" of IOS 7 on my iPhone and after seeing it many have thanked me and opted not to upgrade. I only wish I could have been saved.  

Maybe you are looking for