Article created via ARTMAS05 and M.C. Reference article - Listing View

Has anyone ever encountered the following scenario and resolved it? We are creating articles using ARTMAS05 IDOC. We have reference articles assigned to the merchandise categories. The reference articles have the Basic, Listing, Sales, Logistics Store and Logistics DC views extended. The ARTMAS05 is created so as to extend all of those views when the IDOC is processed. The created article has all the views extended, but the Listing view is the ONLY view where none of the values from the reference article are copied into the created article.
If I add the Listing view values to the E1BPE1MAW1RT (and RTX) segement of ARTMAS05, they are passed to the article. Yet, I don't have to do that with the other views so it does not make sense for us to do that.
I am very interested in learning whether or not there is a solution to this issue as nothing we do appears to fix this. (Other than custom development.)
Thank you.
Dalia

Hi Anisha,
In IS-Retail, you need to maintain Logistics DC and Store View of Article Master.
To overcome this, you have two options.
1) Maintain Reference article in Initial Screen of MM41
2) Otherwise Maintain reference article for MC in WG21.
You create one reference article with Basic View, Listing, Logistics DC and Store View Details.
Use the reference article, while creating new Article master in MM41. Its not even required now to maintain Logistics Dc and Store View for New Article. For new articles system copy's the logistics details from reference article.
Carry out Listing in WSM3 Tcode.
Regards,
Selvakumar. M

Similar Messages

PE 9 and 10 Help PDF Invalid List View Descriptions

Bottom line: Has anyone reported on these problems, and, if so, what is being done about them?
Until proven otherwise, I believe that Premiere Elements 9 and 10 Help PDF requires editing of its List View Descriptions which are appropriate for at least version 8.0/8.0.1, 7, and 4, but not versions 9.0/9.0.1 and 10. Please refer to the Help PDF Projects/View Clip Properties
for version 10:
http://help.adobe.com/en_US/premiere...B-312BB3F13B11
for version 9:
http://help.adobe.com/en_US/Premiere...355c-7f98.html
Problems in this regard for Premiere Elements later than version 8.0/8.0.1 and not for versions 8.0/8.0.1, 7, and 4:
1. List View Properties display in text for export video file, no Data Rate Analysis graphs
2. List View Columns, no ADD to add your own columns, so only Adobe built in ones, and none of the Adobe built in ones, like Client, allow for editable text.
Comments:
Data Rate Analysis
I had read somewhere that these graphs appear for tape based rather than non tape based imports. Mini test: Premiere Elements MPEG4.avi import and DV AVI export of the MPEG4.avi. Results: Version 8.0/8.0.1 Properties for import in text format (file properties) only and Properties for export in text format (file + export properties) as well as display of Data Rate Analysis graph. Versions 9 and 10 Properties for import (file properties) and for export (file + export properties), both import and export text only.
List View Columns
1. If I look at the project.prel WordPad documents and the Client Column information there in each, I do not see any difference.
2. If I create a Premiere Elements 8.0/8.0.1 project, set List View column choices Comments and Client, type in the comments and client information, and save/close/and re-open the project in:
a. Premiere Elements 9.0/9.0.1, the Comments columns and its information will not appear; the Client column will appear, but its information will not be editable. (The 9.0/9.0.1 version does have Client, but not Comments, as a built in choice under Edit Columns)....the latter might explain why no Comments column except...
b. Premiere Elements 10, neither the Comments nor Client columns and their information will appear. (The 10 version does have Client, but not Comments, as a built in choice under Edit Columns.)
One of the Potential Problems:
It is well accepted that, if you edit a project from an earlier version in a later version, you cannot go back to the earlier version for editing. So, one potential problem that I see in all this is the loss of this type of information on upgrading from 8.0/8.0.1 and earlier....
a. If you create a Premiere Elements 8.0/8.0.1 or earlier project which includes Comments and Client information in these List View Column choices, you will lose all that information in version 10 and have only non-editable Client information in version 9.
And, yes we have filed an Adobe Feature Request/Bug Form on this one.
Any comments about what I may have overlooked in trying to get those Help PDF List View Descriptions to work for me would be appreciated.
Thanks.
ATR

I definitely agree that the Help files could use some updating, Tony.

I have created several templates and they look great in live view, however they look like crap when actually tried to set up a webpage based on the template. Help!

I have created sevedral templates and they look great in the live view, however they look like plain HTML text when I try to create a webpage based on the template. HELP!

This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

[HOWTO] Nautilus and mp3 metadata columns in list view (bitrate etc.)

Hidden deeply in the wikipages, I just added a small howto on adding music metadata columns to nautilus's list view:
http://wiki.archlinux.org/index.php/Gno … te_etc..29
It allows for Album, Artist, Track Title and Bitrate Columns in list view mode. A feature I was missing from Nautilus.
Credit to be found here:
http://ubuntuforums.org/showthread.php?t=878683
Posted here for all to enjoy.
Last edited by stefanwilkens (2009-07-09 13:00:43)

hello,
searching for the same thing.
what about using mutagen and python2-nautilus from
the official repositories?
can not run it succesful. any idea?
thanks
red

"U rgent correction" created via CRMD_ORDER and DSWP

Seems we have 2 ways to created an "u-rgent correction"
-- via txn crmd_order, click the "create u-rgent correction" button
-- via txn dswp, in the subject field, select "u-rgent correction" from the dropdown.
What is the difference between them?
Which way is the recommended?
Thanks a lot!

hi
pls check this it will clear ur doubt
https://websmp108.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
https://websmp108.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
Hope it helps
Regards
Prakhar

How to create a navibar and gear(spinner) programatically in cocoa view app

Hi All,
How to create a navigation bar and gear(spinner) programmatic ally in cocoa view based application.
In navigation bar just i need to display Application Title.

Tod Kuykendall wrote:
The issue that I think you're running into is the fact that an application like this breaks some of the rules that Apple has set-up for applications. Because of this I would strongly suspect that the only way to circumvent these restrictions is to write a kernel extension that alters the way the system operates. If you download the package Ray referenced I bet it installs a .kext onto your system that provides the functionality.
I can name several dozen applications that float their windows without installing any kernel extensions.
http://developer.apple.com/documentation/Cocoa/Reference/ApplicationKit/Classes/ NSWindowClass/Reference/Reference.html#//apple_ref/doc/cref/NSNormalWindowLevel

Bizzare effects when letters are created via a CASE...

CRM 5.0
Our production CRM system is periodically copied into our regression system.
Sometime in late October it was noted that all apostrophe (') characters we being replaced by hash (#) characters when any letter was produced as part of a Case run. Letters produced by a Case are displayed as PDF documents in the WebIC, where as regular letters are displayed as Word docs. Anyway, taking a particular service ticket containing a letter created via the Case run I can attempt to view it in the Regression system, but it simply will not display. However, the same letter against the same service ticket does display in the Production system, although the Hash characters are being displayed instead of apostrophe characters.
If I a create a new letter in the Regression via a Case run it produces a letter which displays apostrophe's perfectly. But any new letters created in the same way within the Production system still show hashes in the letters.
To me it sounds like an OSS note has been applied to Production but not to Regression, however, if that were true QAS and Development would have the same problem as the OSS Notes would have to first be tested in them, but both QA and DEV displapostrophe's fine the Case letters.
I should add that any e-mails created as part of the same CASE run are sent out perfectly in both our production and regression environment so the problem only seems to affect letters. I was wondering if maybe the default printer settings might affect this in some way as I'm sure that when HTML is output by Smartforms it problems uses an alternative printer, maybe.
Has anyone encountered anything like this before?.
Gary King
Edited by: Gary King on Nov 30, 2009 1:15 PM

It would seem that the two senior agents do not have the right authority and this is somehow affecting the Case letters. We know this as other agents have produced Case letters and the apostrophe's have been displayed in the letters.

PR automatic deleted which are created via MRP

Hi,
I have lot of purchase requisitions in system which are automatically deleted.
There are no change logs for these PRs.
There PRs are automatically created via MRP and POs are also automatically created with a batch job.
How these PRs are getting deleted?
Please advice.
Thanks,

Hi
When you are running MRP through MD01 and entering in put paramenter in the initial screen as below.
Processing key            NETCH   Net Change in Total Horizon
Create purchase req.       1       Purchase requisitions in opening period
Schedule lines                  3       Schedule lines
Create MRP list                 1       MRP list
Planning mode                  3       Delete and recreate planning data
Scheduling                       1       Determination of Basic Dates for Planned
marked are the reason because of which during next MRP run Purchase requisition are deleting & recreating new as per current demand. If any partial PR converted in to PO will become firm & those PR will not be delted automatically during MRP run
Hope this clear.

Bug with workflow that creates a folder and sub folder with the same name.

Hi,
I've found a possible bug in SharePoint 2010 workflows. I only have access to SharePoint 2010 and SharePoint Designer 2010 over my companies intranet, afaik I don't have access to to logs or anything server side so sorry for the any missing information.
I had some problems with a workflow in one list that needed to create some folders and subfolders in a second list. The production version did a lot more so I setup a test area with 1 list and a workflow that only does the folder creation part and have managed
to consistently replicate this problem.
The test list has two columns, [title] and [sub folder title]
The workflow starts by getting the values for [title] and [sub folder title] into variables.
It then creates a folder in the same list with the same name as [title], and then creates a sub folder under this with the name from [sub folder title]
So the resulting structure would be:
Test List:-
List item with fields [title] and [sub folder title]
[folder: title]:-
[folder: sub folder title]
If both folder names are different (e.g Folder1 and Folder2) then it works perfectly fine, if both folder names are the same (regardless of character case, e.g. samefolderName and sameFolderName) then the workflow fails.
As part of the test i made the first action of the workflow to log the message "Workflow Started" to the history list. When the workflow fail there's nothing logged in the history list other than the error: "The workflow could not update the
item, possibly because one or more columns for the item require a different type of information."
Creating a sub folder with the same name as it's parent works fine manually but for some reason a workflow can't seem to do it in one action.
As there's no history list entries before the error it looks like the workflow is just failing to start but if i do something like add an if statement to check if [title] and [sub folder title] are the same, and only create the subfolder when they are not
then it runs fine doing what it's set to.
The function of the workflow in our office was for convenience so were just working without it. Just wanted to post to see if anyone else has come across this/could try to replicate or explain this and see if it's a SharePoint bug or something specific
to our setup.
thanks,
Martin

not sure about the specifics of your workflow, but if you're querying the list for the folders... keep in mind that a list lookup will only ever bring back ONE item... even if there are several items that meet the filter criteria... example: if i search
a list for an item assigned to "john doe", there may be 15 tasks that meet the criteria, and it'll only grab one... this is why SP Designer WARNS you when your list lookup may exhibit this behavior.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Filter a list-views on page by Date and Time column, not only by Date (Connected Webpart)

I have a task - create a page and display on it all lists/libraies with documents of team meetings. Every meeting has a documents and another information, which is storing in the same lists/libraries on website as another meetings. Additionally there
is a field "MeetingDate" (type: DateTime), which help to indetify a meeting documents.
I have added all on one page and my custom connected webpart (IWebpartRow interface), which help to filter all views on page by field meeting date. It send a date to another webparts on page, and user see information only for this date.
It works fine, but the problem is, that it used only DATE (without time) and i need now to filter all by date and time.
Unfortunately, i noticed that i cannot filter items by date with time in the standard list too. Please see my screenshot.
My question is: may be i should use another interface (not IWebPartRow) that to send 2 values (1 - date, 2 - time) and filter all by 2 columns. Is it possible?
Unfortunatelly i didn't find something like this. I found only a solution to build url like 'http://sp2013/SitePages/Homepage.aspx#InplviewHasha2528afc-50c3-4d5e-aae9-682400976409=FilterField1%3DDatum-FilterValue1%3D2015%252D02%252D27-FilterField2%3DCustomTime-FilterValue2%3D11%253A00'
, but it looks not so good ..(
from MSDN forum...

Hi,
Per my understanding, you might want to display all the specific documents in a page, they can be filtered by values of a Date and time column.
A possible solution I will provide is that, we can create custom visual web part to display all these documents. In the code behind, run a query with CAML to retrieved all the
documents with the specific date and time, then generate a view of hyperlinks that points to these documents.
In this way, we can combine the filter component with the data display component into one web part, with the help of CAML query and Object Model, it would not be a tough job to
implement such a solution.
More information about CAML and Object Model:
https://msdn.microsoft.com/en-us/library/office/ee536691%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to change to Icon View for some folders but and List View for the rest

I've had a bear of a time with View options in my folders. I'd like some folders to be in Icon view and other to be in List view. For what ever reason if I change the view option of one folder it changes the view option of EVERY folder. What can I do to make this happen?

I was about to ask the same. I'd like to use icon view normally, but list view for folders containing lots of text documents. It looks like the solution is using View > Show View Options, change the folder to the view you want, and then tick the box at the top fo the dialogue for "Always open in __ view".
Message was edited by: Adrian Bolt
Message was edited by: Adrian Bolt

HT4927 I have OS 10.7.5 and iPhoto 11 -9.4.2 . My iPhoto is (was) split into 7 libraries created via iPhoto Buddy . Two libraries are now missing marked n/a in Buddy. Exactly how may I restore these 2 specific libraries from Time Machine.

I am looking for simple step by step assistance to restore 2 missing and important (to me) libraries in iPhoto via Time Machine.
Used iPhoto Buddy to create 8 libraries and this worked well until yesterday. Now these missing libraies are just marked n/a. The other 6 appear OK.
Don't resally know what I'm doing with Time Machine it has just sat there on a separate hard drive backing up... never had to call on it before.
Thanks for any help - about 6000 images missing.

Using Time Machine
LN

Creating and updating cross-references in a book

Hello everybody,
I created a book of several files. Now I would like to create and update cross-references from one chapter to another. What do I have to do? (I use Framemaker 8).
Thank you for your help.
Bye
Vreni

For creating cross-references between chapters, open the chapter documents and insert cross-references as is done for any normal document using menu command "Special->Cross-Reference".
For updating all cross-references throughout the book, you can use the menu command "Edit->Update Book".
Regards,
Tarun Garg
Adobe Certified Expert, FrameMaker
http://blogs.adobe.com/techcomm/framemaker/

Create a Credit and Debit memo with reference

Dear Gurus,
When creatting credit and debit sales document with reference to a billing document it is not possible to modify value of the sales document, in order to create a partial document.
It only happens when the billing document refered has billing plan.
I need to create partial debit and credit memo from a billing document with billing plan.
Can anybody take a hand?
best regards,
Juan

Hi,
I presume you are asking , instead of creating credit and debit memos, why cant we change the sales order, Am I right ?
If I am right, then I like to say here, we have a provision in SAP of creating Invoice correction request.
Which would satisfy your quest I suppose. Invoice correction request of customers complaints, has sales document type is RK, and Document category is K.
"I need to create partial debit and credit memo from a billing document with billing plan" I say why not, you can do it with suggested Invoice correction request which is the combination of G2 & L2 in a single document.
However If I have helped you for dispeling your doubt, I am glad.
Regards,
Saplinx

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Article created via ARTMAS05 and M.C. Reference article - Listing View

Similar Messages

Maybe you are looking for