Peopletools 8.53 - Data Mover - Database setup Utility

Hello Everyone,
I have some doubts about the new parameters while creating DEMO database using Database setup utility in Data Mover. On the Database Setup- Database parameters page, few new parameters are intorduced from 8.53 I suppose. The parameters are
Appllication Server ID
Application Server Password
Web Server Password
Enable All Profiles
Set Global Password
Global Password
Could anyone please help in understanding the below parameters and what should I write against those parameters. How do we decide on that what values to provide?
The screenshot and some details is on Peopletools 8.53 Installation guide, page 416
Thanks in advance
Amit

user10787406 wrote:
Since the tables are not loaded in the database ( PSOPRDEFN ) , How can we decide on which user we will give for Application server .Yes, that's the dark side of such parameter in that stage, I know. I don't find it very useful neither. Just use the default one, PS, or VP1.
Also in case we want to change it later ?Sure, give a the proper right to a user, and specify it in you psappsrv.cfg.
Generally we will load all the peoplesoft tables and decide for the Application Server ID . Same we do for PTWEBSERVER IDGenerally and so far yes, but it has obviously been decided otherwise with PTools 8.53. As explained earlier andd many times across conferences and release value proposition, that's for security reason. Not all the shops/teams will now have the same default users/pwd.
Nicolas.

Similar Messages

  • Unable to create Temp table in Data mover

    Hi dudes,
    i tried to create a Temp table in Datamover but could not. i have tried to run it in user mode as well as bootstrap mode, even though not get success. i have added my sample datamover script, please go through the scripts and notice my error.
    SET LOG D:\PT851\log\test1537.log;
    SET NO DATA;
    SET NO TRACE;
    CREATE_TEMP_TABLE test1537DB;
    SET OUTPUT D:\PT851\test1537.out;
    EXPORT test1537DB;
    and my error is,
    Error Message:- PeopleTools 8.51 - Data Mover Copyright (c) 2012 PeopleSoft, Inc. All Rights Reserved Started: Sun Dec 23 02:57:24 2012 **** PeopleSoft trace has been turned off Data Mover Release: 8.51 Database: C91TST (ENG) Ended: Sun Dec 23 02:57:24 2012 **** PeopleSoft trace has been turned back on Unsuccessful completion

    Is the record definition test1537DB existing?

  • How to select for Database Setup via Data Mover

    install PT849+HRMS89 with MUL on REH 5.4 x64+Weblogic92+Tuxedo 91+Oracle 10g
    after database instance installation manually, need to use Data Mover to import *.db file into database from windows client server.
    in this step, any one can advice the setup for DEMO and SYSTEM type.
    See the screen https://docs.google.com/file/d/0B50TDBQBIUW7NUZyLUpJY01zcVU/edit
    PeopleTools System DataBase-->ptengs.db
    PeopleSoft HRCS Database - Simplified Chinese --> hczhsa.db
    PeopleSoft HRCS Database - English--> hcengs.db
    if Demo selected, hcengl.db is involved, but no ptengs.db
    I have tried:
    1. select SYSTEM and PeopleTools Database, then import ptengs.db, Then hcengs.db and hczhsa.db.
    2. Only import hcengs.db and hczhsa.db
    But both are failed for there exists many database record error in the subsequent step.
    Thank you very much.
    Andy

    The second option is the correct one, but if you already ran the 1st, then it will fail. Better to recreate the db from scratch and directly go for the 2nd option.
    Nicolas.

  • Peoplesoft setup - unable to launch Data Mover

    Hello,
    Background info:
    Peopletools 8.53
    FSCM 9.1
    Oracle Database 11.2.0.3
    Windows 7 64-bit
    Oracle Linux 6.3 64-bit (on a virtual machine)
    Demo database
    I am doing a PeopleSoft installation for the first time. I have installed all the necessary components on my Windows machine and the Linux VM on it. I've created the demo database and when I try to launch Data Mover, I get the following error:
    File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 12154 - ORA-12154: TNS:could not resolve the connect identifier specified
    I do have an entry for the database in tnsnames.ora. The listener is running and I can tnsping the database. Any ideas?
    Thanks,
    Maya

    SERVICE_NAME = PST didn't work either
    lsnrctl status results:
    [oracle@localhost ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 21-FEB-2013 09:46:02
    Copyright (c) 1991, 2011, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost.localdomain)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
    Start Date                21-FEB-2013 08:29:22
    Uptime                    0 days 1 hr. 16 min. 39 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
    Services Summary...
    Service "ORCL.localdomain" has 1 instance(s).
      Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
    Service "ORCLXDB" has 1 instance(s).
      Instance "PST", status READY, has 1 handler(s) for this service...
    Service "PST" has 1 instance(s).
      Instance "PST", status READY, has 1 handler(s) for this service...
    Service "PST.localdomain" has 1 instance(s).
      Instance "PST", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully-Maya

  • After installed DMO of Campus, installing SYS , data mover don't show PeopleSoft HRCS Database

    Hello  every one, I've made the installation of PeopleSoft Campus (DMO) instance and it's running right now. After that I began the installation of the SYS instance, using the same servers: Oracle Linux (database), Oracle Linux (Application Server), Windows Server (1 machine) for Installation & Crystal Reports.
    I created a new database named HRMS9SYS without errors.
    Now its time to work with Data Mover. The first task is to use de database Wizard.
    Select target database ORACLE
    database type    UNICODE
    character set AL32UTF8
    And in the next step Peoplesoft Applications to Add
    I can only see People Tools System Database US-English
    ¿Can someone explain why there is not PeopleSoft HRCS Database - English and PeopleSoft HRCS Database - Spanish?
    Theese are the same files with wich I installed the DMO instance...

    Yagu,
    1) Be sure the PS_APP_HOME variable is pointing to the right directory where HCM has been installed (check within ConfManager/Profile (Default)/Edit/ProcessScheduler tab).
    2) Be sure you checked the "Peoplesoft HCM Database" checkbox during the application installation. Open the log file HCM_InstallLog.log in the directory where you installed the application.
    You may have something like this:
    CHOSEN_FEATURE_LIST=PeopleSoft HCM Demo Database
    CHOSEN_INSTALL_FEATURE_LIST=PeopleSoft HCM Demo Database
    CHOSEN_INSTALL_SET=
    => this means only Demo is installed and you cannot go for something else (except for Peopletools system database which you don't want).
    If you have a long list of features, be sure there is something like this :
    CHOSEN_FEATURE_LIST=PeopleSoft Absence Management,<...snipped for reading, this is the list of the features you checked when installing HCM...>,PeopleSoft HCM Demo Database,PeopleSoft HCM Database
    CHOSEN_INSTALL_FEATURE_LIST=PeopleSoft Absence Management,<...snipped for reading, this is the list of the features you checked when installing HCM...>,PeopleSoft HCM Demo Database,PeopleSoft HCM Database
    CHOSEN_INSTALL_SET=PT
    I tested it, if PeopleSoft HCM Database is unchecked during installation (and consequenty not in the feature list in the logfile), there's no option to install a SYS database later on.
    If this is the case, you may want to reinstall the appl in the same directory. I do not think it will hurt.
    HTH,
    Nicolas.

  • Why cannot find data movement for clone database option on OEM 11gr2

    Hi Expert,
    I have Oracle 11gr2 11.2.3 normal OEM install to monitor our RAC database. When i go click data movement option, i can't find the clone database option. Any idea why ? Thanks

    Hi;
    Similar question mention in below links:
    Clone Database: Select Destination in OEM 10g Database Control
    Also see:
    http://www.stanford.edu/dept/itss/docs/oracle/10g/em.101/b12016.pdf << part 6-6
    Regard
    Helios

  • Cannot login to App designer using PS id while able to login in data mover.

    Hi,
    I am installing peopletool 8.50 (HRMS). I ran all the sql scripts successfully. Ran the DMS script as well for demo database.
    When I am trying to login in App designer using PS/PS i'm getting the following error..
    File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 404 - ORA-01017: invalid username/password; logon denied
    while I am able to login in data mover in boot strap. Can anybody pls help me out?

    yes I am using Oracle 11g.
    and man.. thanks a lot for your help. that was really awesome post :-)
    People do say true.. here only I can find the GODs of Oracle.
    Thanks Again
    Gaurav
    Edited by: Gaurav_laconic on Mar 12, 2013 6:13 PM

  • Select data from DataBase

    Hi;
    I try to select data from DataBase, But I get the following error, Could anyone help? thanks.
    Exception in thread "main" java.lang.ClassNotFoundException: oracle.jdbc.driver.
    OracleDriver
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at Lookup.main(Lookup.java:12)
    import java.sql.*;
    import java.io.*;
    import java.util.*;
    public class Lookup {
        public static void main(String[] args)
            throws SQLException, ClassNotFoundException {
            String dbUrl = "jdbc:oracle:thin:@augur.scms.waikato.ac.nz:1521:comp319";
            String user = "group029";
            String password = "group029";
            // Load the driver (registers itself)
            Class.forName("oracle.jdbc.driver.OracleDriver");
            Connection c = DriverManager.getConnection(dbUrl, user, password);
            Statement s = c.createStatement();
            //SQL code:
            ResultSet r =
                s.executeQuery("SELECT * " +"FROM movie");
         StringBuffer results= new StringBuffer();
            ResultSetMetaData metaData = r.getMetaData();
         int numberOfColumns = metaData.getColumnCount();
         for(int i=1; i<=numberOfColumns; i++)
             results.append(metaData.getColumnName(i)+"\t");
         results.append("\n");
         while (r.next()){
             for( int i=1; i <=numberOfColumns; i++)
              results.append(r.getObject(i)+"\t");
             results.append("\n");
         s.close();
    }

    It's a classpath problem. Either you mistyped the class name, or you don't have the class in your classpath. I think Oracle's drivers come in db12.zip or db12.jar or some such. Whatever that jar or zip file is, it has to be in your classpath, but it's not.
    Or it is in your classpath, but you're in an appserver context where the classloader that the container provides for your app uses something other than the classpath variable. For instance, in tomcat, the jar file would be uder webapps/yourApplication/WEB-INF/lib I think.

  • Move database from server running Oracle 11G to server running Oracle 12c

    I'm trying to find out the easiest way to migrate a database from a server running Oracle 11G to a server running Oracle 12c. I have tried using RMAN's duplicate database command but have run into far too many issues when trying to setup both servers before running the duplicate command.  If someone could provide some clear guidance on configuring both servers for the RMAN Duplicate command then that would be great.  The other thing I have tried is performing a cold backup of all the files for the database (control files, data files, etc.).  Copying them to the new server and then recreating the control file to include the correct location and names for the datafiles and redologs.  After recreating the control file the database will not start up.  I'm suspecting this is due to the version differences. If you can provide me clear (ie. migration for dummies) instruction for getting either of these methods to work it would be greatly appreciated.  I'm also open to any other method you can think of to achieve what I'm trying to accomplish. Thanks, Paul Noyes

    Pl do not post duplicates - Move database from server running Oracle 11G to server running Oracle 12c

  • Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

    SQL Server: 2008 R2 SP2
    Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
    When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
    comes again. During these few weeks, there is no restart or query plan clearing.
    If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
    here.
    There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
    My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
    Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
    DBCC checkdb has been run
    The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
    The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
    INSERT @ChequeAccount
    SELECT        PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
                (PS.GrossPay    + PS.LumpSumA + PS.LumpSumB    + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax    - PS.DeductionsAfterTax  
     - PS.Tax- PS.ETPTax    + PS.TaxRebate) * -1 AS Amount,
                CGLM.GLAccountID
    FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID  AND  ISH.PayrollID = @binPayrollID   
    AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
    JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
    JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

    The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
    query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
    Or it may not detect it, and return uncommitted data or fail to return committed data.
    All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
    Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
    resubmit the query. But what about spurious incorrect results?
    If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
    and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
    and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
    This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
    http://www.sommarskog.se/query-plan-mysteries.html
    However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Problem with direct input program while uploading data into database

    TABLES:  BGR00,                        " Mappensatz
             BMM00,                        " MM01/MM02  BTCI-Kopfdaten
             BMMH1,                        " MM01/MM02 Hauptdaten
             BMMH2,                        " Länderdaten (Steuern)
             BMMH3,                        " Prognosewerte
             BMMH4,                        " Verbrauchswerte
             BMMH5,                        " Kurztexte
             BMMH6,                        " Mengeneinheiten
             BMMH7,                        " Langtexte
             BMMH8.                        " Referentielle EAN's
           Satztypen
    DATA:    MAPPENSATZ  LIKE BMM00-STYPE VALUE '0',
             KOPFSATZ    LIKE BMM00-STYPE VALUE '1',
             HAUPTSATZ   LIKE BMM00-STYPE VALUE '2',
             KUN_SATZ    LIKE BMM00-STYPE VALUE 'Z',
             LANDSATZ    LIKE BMM00-STYPE VALUE '3',
             PROGSATZ    LIKE BMM00-STYPE VALUE '4',
             VERBSATZ    LIKE BMM00-STYPE VALUE '5',
             KTEXTSATZ   LIKE BMM00-STYPE VALUE '6',
             MESATZ      LIKE BMM00-STYPE VALUE '7',
             TEXTSATZ    LIKE BMM00-STYPE VALUE '8',
             EANSATZ     LIKE BMM00-STYPE VALUE '9'.
    Common Data Bereich fuer die extern aufgerufenen Routinen
           Initialstrukturen
    DATA:  BEGIN OF COMMON PART RMMMBIMY.
    DATA:    BEGIN OF I_BMM00.
               INCLUDE STRUCTURE BMM00.    " Kopfdaten
    DATA:    END OF I_BMM00.
    DATA:    BEGIN OF I_BMMH1.
               INCLUDE STRUCTURE BMMH1.    " Haupdaten
    DATA:    END OF I_BMMH1.
    DATA:    BEGIN OF I_BMMH2.
               INCLUDE STRUCTURE BMMH2.    " Länderdaten
    DATA:    END OF I_BMMH2.
    DATA:    BEGIN OF I_BMMH3.
               INCLUDE STRUCTURE BMMH3.    " Prognosewerte
    DATA:    END OF I_BMMH3.
    DATA:    BEGIN OF I_BMMH4.
               INCLUDE STRUCTURE BMMH4.    " Verbrauchswerte
    DATA:    END OF I_BMMH4.
    DATA:    BEGIN OF I_BMMH5.
               INCLUDE STRUCTURE BMMH5.    " Kurztexte
    DATA:    END OF I_BMMH5.
    DATA:    BEGIN OF I_BMMH6.
               INCLUDE STRUCTURE BMMH6.    " Mengeneinheiten
    DATA:    END OF I_BMMH6.
    DATA:    BEGIN OF I_BMMH7.
               INCLUDE STRUCTURE BMMH7.    " Textzeilen
    DATA:    END OF I_BMMH7.
    DATA:    BEGIN OF I_BMMH8.
               INCLUDE STRUCTURE BMMH8.    " Referentielle EAN's
    DATA:    END OF I_BMMH8.
    DATA:  END OF COMMON PART.
    DATA: WA LIKE TEDATA-DATA.
           Einzelfelder
    DATA:    GROUP_COUNT(6) TYPE C,    " Anzahl Mappen
             TRANS_COUNT(6) TYPE C,    " alte Definition für rmmmbim0
             SATZ_COUNT  LIKE MUEB_REST-TRANC, " Trans.zähler neu
             H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
             SATZ2_COUNT(6) TYPE C.    " Anz. Sätze je Trans. ohne Kopfsatz
    DATA:    XEOF(1)          TYPE C,  " X=End of File erreicht
             XHAUPTSATZ_EXIST TYPE C,  " X=Hauptsatz zum Kopf exi.
             NODATA(1)        TYPE C.  " kein BI für dieses Feld
    mk/15.08.94:
    DATA:    GROUP_OPEN(1)  TYPE C.             " X=Mappe schon geöffnet
    *eject
           Konstanten
    DATA:    C_NODATA(1)    TYPE C VALUE '/'.   " Default für NODATA
    DATA:    MATNR_ERW     LIKE MARA-MATNR  VALUE '0                 '.
    DATA:    MATNR_ERW_INT LIKE MARA-MATNR.  "internal sight of '0      '
    DATA:    MATNR_LAST    LIKE MARA-MATNR.  "Material number
    mk/11.08.94 2.1H:
    If this flag is initial, the database updates will be done directly
    during background maintenance instead of using a separate update
    task. (no usage of this flag in dialogue mode!)
    DATA: DBUPDATE_VB(1) VALUE ' '.       "note 306628
    data: matsync type mat_sync. "wk/99a no update in dialog if called
    ***INCLUDE ZMUSD070.
    TABLES: MARA,                          "Material Master: General Data
            MARC,                          "Material Master: C Segment
            MARD,                          "Material Master: St Loc/Batch
            MBEW,                          "Material Valuation
            MVKE,                          "Material Master: Sales Data
            MLGN,                          "Material Data per Whse Number
            MLAN,                          "Tax Classification: Material
            T001W,                         "Plants/Branches
            TBICU.
    DATA: BEGIN OF VALUTAB OCCURS 0.
            INCLUDE STRUCTURE RSPARAMS.
    DATA: END OF VALUTAB.
    DATA: BEGIN OF VARTECH.
            INCLUDE STRUCTURE VARID.
    DATA: END OF VARTECH.
    DATA: PARMS LIKE ZXXDCONV.
    DATA: REC_COUNT      TYPE  I,
          REC_COUNT_BAD  TYPE  I,
          ZJOBID         LIKE  TBIZU-JOBID,
          ZJOBCOUNT      LIKE  TBIZU-JOBCOUNT,
          ZMATNR         LIKE  MARA-MATNR,
          ZTEXT(80)      TYPE  C.
    CONSTANTS: LIT_ZERO(18)  TYPE  C            VALUE '000000000000000000',
               LIT_CHAR      TYPE  C            VALUE '_',
               LIT_CREATE    LIKE  BMM00-TCODE  VALUE 'MM01',
               LIT_CHANGE    LIKE  BMM00-TCODE  VALUE 'MM02',
               LIT_CHECK(1)  TYPE  C            VALUE 'X'.
    DATA:  BEGIN OF INP_DATA OCCURS 0,
             MATNR(18)  TYPE C,            " Material code
             UMREN(6)   TYPE C,            " Denominator
             MEINH(3)   TYPE C,            " Alternate UOM
             UMREZ(6)   TYPE C,            " Numerator
           END OF INP_DATA.
    *eject
    SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT (13) TEXT-004.
    PARAMETERS:     P_PC        RADIOBUTTON GROUP SRC DEFAULT 'X'.
    SELECTION-SCREEN COMMENT (6) TEXT-005.
    PARAMETERS:     P_UNIX      RADIOBUTTON GROUP SRC.
    SELECTION-SCREEN COMMENT (6) TEXT-006.
    PARAMETERS:     P_DS_TYP    LIKE     ZXXDCONV-DS_TYP
                                   DEFAULT 'ASC'.
    SELECTION-SCREEN END OF LINE.
    *SELECT-OPTIONS: S_PATH      FOR      PARMS-PATH
                                  NO INTERVALS
                                  LOWER CASE.
    PARAMETERS:  P_PATH TYPE RLGRAP-FILENAME.
    PARAMETERS:     P_HDRLIN   LIKE     ZXXDCONV-HDR_LINES
                                   DEFAULT 0,
                    P_JOBNAM   LIKE     TBICU_S-JOBNAME
                                   MEMORY ID BM1,
                    P_DI_EXE    AS       CHECKBOX
                                   DEFAULT  LIT_CHECK,
                    P_MAPPE     LIKE     BGR00-GROUP
                                   DEFAULT  'MRP_UOM_LOAD'
                                   NO-DISPLAY.
    SELECTION-SCREEN END OF BLOCK INOUT.
    *eject
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
           EXPORTING
                PROGRAM_NAME  = SYST-REPID
                DYNPRO_NUMBER = SYST-DYNNR
                FIELD_NAME    = 'P_PATH'
           CHANGING
               FILE_NAME     = S_PATH-LOW
                FILE_NAME     = P_PATH
           EXCEPTIONS
                MASK_TOO_LONG = 1
                OTHERS        = 2.
    AT SELECTION-SCREEN.
    Set up parameter record
      PARMS-UNIX      = P_UNIX.
      PARMS-PC        = P_PC.
      PARMS-DS_TYP    = P_DS_TYP.
      PARMS-JOBNAME   = P_JOBNAM.
      PARMS-MAPPE     = P_MAPPE.
      PARMS-HDR_LINES = P_HDRLIN.
    *eject
           Main Processing Routine                                       *
    START-OF-SELECTION.
    Initialization
      PERFORM 0000_HOUSEKEEPING.
    Initialize transaction data in I_BM00
    PERFORM 0500_INIT_BMM00.
    Process input files
    SORT S_PATH BY SIGN OPTION LOW.
         MOVE S_PATH-LOW TO PARMS-PATH.
          MOVE P_PATH TO PARMS-PATH.
    LOOP AT S_PATH.
       AT NEW LOW.
          CLEAR   INP_DATA.
         REFRESH INP_DATA.
    Read source data into internal table
          PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
    Processs each record in internal table
          ZTEXT    = TEXT-007.
          ZTEXT+13 = PARMS-DS_NAME.
          PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
    Initialize transaction data in I_BM00
      PERFORM 0500_INIT_BMM00.
          LOOP AT INP_DATA.
    Reset tables for each record
            BMM00              = I_BMM00.
            BMMH1              = I_BMMH1.
            BMMH6              = I_BMMH6.
    Load structures with data
            MOVE-CORRESPONDING INP_DATA TO BMM00.
            PERFORM 2000_WRITE_OUTPUT USING BMM00.
            MOVE-CORRESPONDING INP_DATA TO BMMH1.
            PERFORM 2000_WRITE_OUTPUT USING BMMH1.
            MOVE-CORRESPONDING INP_DATA TO BMMH6.
            PERFORM 2000_WRITE_OUTPUT USING BMMH6.
            REC_COUNT = REC_COUNT + 1.
          ENDLOOP.
       ENDAT.
    ENDLOOP.
      IF  REC_COUNT GT 0
      AND P_DI_EXE  EQ LIT_CHECK.
        PERFORM 3000_START_DI_JOB.
      ENDIF.
    WRITE: / TEXT-008,
               REC_COUNT.
      PERFORM 9000_END_OF_JOB.
    *eject
    Include containing common routines used by direct input programs
      INCLUDE ZMUSD071.
    *eject
          FORM 0500_INIT_BMM00                                          *
          Initialize I_BMM00 with transaction code and views selected   *
    FORM 0500_INIT_BMM00.
    ***this changes done by samson**
    if not inp_data[] is initial.
    select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
    if sy-subrc = 0.
      I_BMM00-TCODE = LIT_CHANGE.
    Basic data
      I_BMM00-XEIK1  = LIT_CHECK.
    else.
      I_BMM00-TCODE = LIT_CREATE.
    Basic data
      I_BMM00-XEIK1 = LIT_CHECK.
    endif.
    endif.
    **this changes above done by samson**
    Transaction code
    I_BMM00-TCODE = LIT_CHANGE.
    Basic data
    I_BMM00-XEIK1  = LIT_CHECK.
    ENDFORM.
    INCLUDE ZMUSD069.
    *eject
          FORM 0000_HOUSEKEEPING                                        *
          Initialization routines                                       *
    FORM 0000_HOUSEKEEPING.
      PERFORM 0010_LDS_NAME.
      PERFORM 0020_DS_NAME.
      PERFORM 0030_OPEN_FILE.
      PERFORM 0040_INIT_STRUCTS.
    ENDFORM.
    *eject
          FORM 0010_LDS_NAME                                            *
          Obtain logical file name from DI job details                  *
    FORM 0010_LDS_NAME.
    Check valid job name
      SELECT SINGLE * FROM  TBICU
                      WHERE JOBNAME EQ PARMS-JOBNAME.
      IF SY-SUBRC EQ 0.
        CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
             EXPORTING
                  REPORT               = TBICU-REPNAME
                  VARIANT              = TBICU-VARIANT
             IMPORTING
                  TECHN_DATA           = VARTECH
             TABLES
                  VARIANT_VALUES       = VALUTAB
             EXCEPTIONS
                  VARIANT_NON_EXISTENT = 1
                  VARIANT_OBSOLETE     = 2
                  OTHERS               = 3.
        IF SY-SUBRC EQ 0.
          READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
          MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
        ELSE.
          MESSAGE I001 WITH PARMS-JOBNAME.
          MESSAGE A099.
        ENDIF.
      ELSE.
        MESSAGE I000 WITH PARMS-JOBNAME.
        MESSAGE A099.
      ENDIF.
    ENDFORM.
    *eject
          FORM 0040_INIT_STRUCTS                                        *
          Initialize structures for direct input records                *
    FORM 0040_INIT_STRUCTS.
    Start of standard SAP initialization from example program RMMMBIME
    *------- Write session record -
      CLEAR BGR00.
      BGR00-STYPE  = MAPPENSATZ.
      BGR00-GROUP  = PARMS-MAPPE.
      BGR00-NODATA = C_NODATA.
      BGR00-MANDT  = SY-MANDT.
      BGR00-USNAM  = SY-UNAME.
      BGR00-START  = BGR00-NODATA.
      BGR00-XKEEP  = BGR00-NODATA.
      PERFORM 2000_WRITE_OUTPUT USING BGR00.
    *----- Initialize structures -
      NODATA = BGR00-NODATA.
      PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
    End of standard SAP initialization from example program RMMMBIME
    ENDFORM.
    *eject.
          FORM 3000_START_DI_JOB                                        *
          Start direct input job                                        *
    FORM 3000_START_DI_JOB.
      ZTEXT = 'Starting '(021).
      ZTEXT+9 = TBICU-JOBNAME.
      PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
      CALL FUNCTION 'BI_START_JOB'
           EXPORTING
                JOBID                 = ' '
                JOBTEXT               = TBICU-JOBNAME
                REPNAME               = TBICU-REPNAME
                SERVER                = TBICU-EXECSERVER
                VARIANT               = TBICU-VARIANT
                NEW_JOB               = 'X'
                CONTINUE_JOB          = ' '
                START_IMMEDIATE       = 'X'
                DO_NOT_PRINT          = 'X'
                USERNAME              = SY-UNAME
           IMPORTING
                JOBID                 = ZJOBID
                JOBCOUNT              = ZJOBCOUNT
           EXCEPTIONS
                JOB_OPEN_FAILED       = 1
                JOB_CLOSE_FAILED      = 2
                JOB_SUBMIT_FAILED     = 3
                WRONG_PARAMETERS      = 4
                JOB_DOES_NOT_EXIST    = 5
                WRONG_STARTTIME_GIVEN = 6
                JOB_NOT_RELEASED      = 7
                WRONG_VARIANT         = 8
                NO_AUTHORITY          = 9
                DIALOG_CANCELLED      = 10
                JOB_ALREADY_EXISTS    = 11
                PERIODIC_NOT_ALLOWED  = 12
                ERROR_NUMBER_GET_NEXT = 13
                OTHERS                = 14.
      IF SY-SUBRC EQ 0.
        WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
      ELSE.
        WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
      ENDIF.
    FORM 0020_DS_NAME.
      CALL FUNCTION 'FILE_GET_NAME'
           EXPORTING
                CLIENT           = SY-MANDT
                LOGICAL_FILENAME = PARMS-LDS_NAME
                OPERATING_SYSTEM = SY-OPSYS
           IMPORTING
                FILE_NAME        = PARMS-DS_NAME
           EXCEPTIONS
                FILE_NOT_FOUND   = 1
                OTHERS           = 2.
      IF SY-SUBRC NE 0.
        MESSAGE E002 WITH PARMS-LDS_NAME.
        MESSAGE A099.
      ENDIF.
    ENDFORM.
    *eject
          FORM 0030_OPEN_FILE                                           *
          Open physical file for output                                 *
    FORM 0030_OPEN_FILE.
    OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
      OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
                                     encoding default. "thg191105
      IF SY-SUBRC NE 0.
        MESSAGE E003 WITH PARMS-DS_NAME.
        MESSAGE A099.
      ENDIF.
    ENDFORM.
    *eject
          FORM 1000_GET_SOURCE_DATA                                     *
          Read source data into internal table                          *
    -->  INP_DATA   " Name of internal table passed as parameter       *
    FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
      CALL FUNCTION 'Z_FILE_UPLOAD'
           EXPORTING
                UNIX                = PARMS-UNIX
                PC                  = PARMS-PC
                FILETYPE            = PARMS-DS_TYP
                FILENAME            = PARMS-PATH
                HDR_LINES           = PARMS-HDR_LINES
           TABLES
                DATA_TAB            = INP_DATA
           EXCEPTIONS
                CONVERSION_ERROR    = 1
                FILE_OPEN_ERROR     = 2
                FILE_READ_ERROR     = 3
                INVALID_TABLE_WIDTH = 4
                INVALID_TYPE        = 5
                NO_BATCH            = 6
                UNKNOWN_ERROR       = 7
                INVALID_SOURCE      = 8
                OTHERS              = 9.
    ENDFORM.
    *eject
          FORM 2000_WRITE_OUTPUT                                        *
          Write record in standard SAP structure to UNIX file           *
    -->  I_STRUCT   " Name of record passed as parameter               *
    *FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
    FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY.      "SRY28NOV05
       TRANSFER I_STRUCT TO PARMS-DS_NAME.
      IF SY-SUBRC NE 0.
        MESSAGE E004 WITH PARMS-DS_NAME.
        MESSAGE A099.
      ENDIF.
    ENDFORM.
    *eject
    *&      Form  2100_WS_DOWNLOAD
          text                                                           *
    -->  p1        text
    <--  p2        text
    FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
    DATA: FILENAME LIKE RLGRAP-FILENAME.   "SRY28NOV05
      DATA: W_FILENAME TYPE STRING.             "SRY28NOV05
      DATA: W_FTYP(10) TYPE C VALUE 'DAT'.      "SRY28NOV05
    MOVE PARMS-DS_NAME TO FILENAME.       "SRY28NOV05
      MOVE PARMS-DS_NAME TO W_FILENAME.      "SRY28NOV05
    *BEGIN OF BLOCK COMMENT BY SRY28NOV05
    CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            BIN_FILESIZE        = ' '
            CODEPAGE            = ' '
               FILENAME            = FILENAME
               FILETYPE            = 'DAT'
            MODE                = ' '
            WK1_N_FORMAT        = ' '
            WK1_N_SIZE          = ' '
            WK1_T_FORMAT        = ' '
            WK1_T_SIZE          = ' '
            COL_SELECT          = ' '
            COL_SELECTMASK      = ' '
       importing
            filelength          =
          TABLES
               DATA_TAB            = INP_DATA
            FIELDNAMES          =
          EXCEPTIONS
               FILE_OPEN_ERROR     = 1
               FILE_WRITE_ERROR    = 2
               INVALID_FILESIZE    = 3
               INVALID_TABLE_WIDTH = 4
               INVALID_TYPE        = 5
               NO_BATCH            = 6
               UNKNOWN_ERROR       = 7
               OTHERS              = 8.
    *END OF BLOCK COMMENT BY SRY28NOV05
    *BEGIN OF BLOCK ADDED BY SRY28NOV05
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                        = W_FILENAME
          FILETYPE                        = W_FTYP
        TABLES
          DATA_TAB                        = INP_DATA
       EXCEPTIONS
         FILE_WRITE_ERROR                = 1
         NO_BATCH                        = 2
         GUI_REFUSE_FILETRANSFER         = 3
         INVALID_TYPE                    = 4
         NO_AUTHORITY                    = 5
         UNKNOWN_ERROR                   = 6
         HEADER_NOT_ALLOWED              = 7
         SEPARATOR_NOT_ALLOWED           = 8
         FILESIZE_NOT_ALLOWED            = 9
         HEADER_TOO_LONG                 = 10
         DP_ERROR_CREATE                 = 11
         DP_ERROR_SEND                   = 12
         DP_ERROR_WRITE                  = 13
         UNKNOWN_DP_ERROR                = 14
         ACCESS_DENIED                   = 15
         DP_OUT_OF_MEMORY                = 16
         DISK_FULL                       = 17
         DP_TIMEOUT                      = 18
         FILE_NOT_FOUND                  = 19
         DATAPROVIDER_EXCEPTION          = 20
         CONTROL_FLUSH_ERROR             = 21
         OTHERS                          = 22.
      IF SY-SUBRC NE 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *END OF BLOCK ADDED BY SRY28NOV05
    ENDFORM.                               " 2100_WS_DOWNLOAD
    *eject
          FORM 4000_PROGRESS_INDICATOR                                  *
          Write progress text to status bar                             *
    -->  TEXT   " Text passed as parameter                             *
    FORM 4000_PROGRESS_INDICATOR USING TEXT.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
           EXPORTING
                PERCENTAGE = 0
                TEXT       = TEXT
           EXCEPTIONS
                OTHERS     = 1.
    ENDFORM.
    *eject.
          FORM 9000_END_OF_JOB                                          *
          Close files on UNIX                                           *
    FORM 9000_END_OF_JOB.
      CLOSE DATASET PARMS-DS_NAME.
    ENDFORM.
    FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
      CALL FUNCTION 'Z_FILE_UPLOAD'
           EXPORTING
                UNIX                = PARMS-UNIX
                PC                  = PARMS-PC
                FILETYPE            = PARMS-DS_TYP
                FILENAME            = PARMS-PATH
                HDR_LINES           = PARMS-HDR_LINES
           TABLES
                DATA_TAB            = INP_DATA
           EXCEPTIONS
                CONVERSION_ERROR    = 1
                FILE_OPEN_ERROR     = 2
                FILE_READ_ERROR     = 3
                INVALID_TABLE_WIDTH = 4
                INVALID_TYPE        = 5
                NO_BATCH            = 6
                UNKNOWN_ERROR       = 7
                INVALID_SOURCE      = 8
                OTHERS              = 9.
    ENDFORM.
    *eject
          FORM 2000_WRITE_OUTPUT                                        *
          Write record in standard SAP structure to UNIX file           *
    -->  I_STRUCT   " Name of record passed as parameter               *
    *FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
    FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY.      "SRY28NOV05
       TRANSFER I_STRUCT TO PARMS-DS_NAME.
      IF SY-SUBRC NE 0.
        MESSAGE E004 WITH PARMS-DS_NAME.
        MESSAGE A099.
      ENDIF.
    ENDFORM.
    *eject
    *&      Form  2100_WS_DOWNLOAD
          text                                                           *
    -->  p1        text
    <--  p2        text
    FORM 2100_WS_DOWNLOAD TABLES INP_DATA.

    Hi,
    Thnaks for your reply, This is my requirement.
    Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
    Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
    here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
    when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
    then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
    then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
    So could u help me in this it will be gr8.
    Thanks & Regards,
    RamNV

  • Printer setup utility freezes when I try to add drivers

    I have an Epson Stylus Photo RX500 all-in-one printer which worked fine until a few weeks ago. My best guess as to why it stopped working is that I let my hard drive fill up and some data got corrupted/overwritten (I've had numerous problems incuding my System Folder becoming 'unblessed' which necessitated a reinstall).
    When I tried to print there were no drivers recognized. If I checked in home>library>printers I could find what appeared to be the driver (Stylus Photo RX500) but opening that would bring up a message it wasn't in my list of printers. Trying to add the printer to the list gave the message that the driver wasn't found. In the Finder the driver was listed as 372KB. In my cloned external HD the same file was listed as 408KB. Copying over the larger file to my internal didn't solve the problem.
    I went to the Epson site and found a driver which was only listed for OS10.2 and a driver to Intel Macs (I have a G4 PB). I downloaded the 10.2 driver and installed it (408KB). Now when I open the printer setup utility EPSON USB is listed as an option but when I click on that the utility freezes. I've tried restarting and repairing permissions but still no go.
    Yoroshiku onegaishimasu. TIA.

    Ohayo gozaimasu,
    I saw what was available on the US site, so went to the Epson UK site, where they show one driver for OSX - PowerPC, for the RX500, it's version 1.9b versus the 1.7 on the US site. The driver is a 7.9mb download. Looking at the other English sites around the world, 1.9b seems to be the lastest OSX PPC driver.
    The link is http://esupport.epson-europe.com/FileDownload.aspx?lng=en-GB&ID=19449&data=6D58D 013F2B22854B9450E1814C134D338E0C605169D8D398A3275D13F8B5BB5
    Perhaps that will work better for you.

  • Error inserting data into database

    Hello I am having error inserting data into database through a servlet.Please I am very new to Java Technology and need your immediate help. beloww is the codea nd the error
    Apache Tomcat/4.0.3
    ERROR: Problems with adding new entry
    java.sql.SQLException: [Microsoft][ODBC SQL Server Driver][SQL Server]There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.
         at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6106)
         at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:6263)
         at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:2525)
         at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:337)
         at Register.insertIntoDB(Register.java:71)
         at Register.doPost(Register.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2343)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
         at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
         at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1012)
         at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1107)
         at java.lang.Thread.run(Thread.java:536)
    COde:
    import java.util.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    import java.sql.*;
    public class Register extends HttpServlet
         public static Statement statement;
         private Connection DBConn;
         public void init(ServletConfig config) throws ServletException
              super.init(config);
              try {
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   DBConn=DriverManager.getConnection("jdbc:odbc:Challenge");
              catch(Exception e) {
                   e.printStackTrace();
                   DBConn=null;
         public void doPost(HttpServletRequest req, HttpServletResponse res)
              throws ServletException, IOException
                   String user_id,FirstName,LastName, Email, Login, Password;
              FirstName = req.getParameter("FirstName");
              LastName = req.getParameter("LastName");
              Email = req.getParameter("Email");
              Login = req.getParameter("Login");
              Password = req.getParameter("Password");
              PrintWriter output = res.getWriter();
              res.setContentType("text/html");
              if (user_id.equals("")||
              FirstName.equals("") ||
                   LastName.equals("") ||
                   Email.equals("") ||
                   Login.equals("") ||
                   Password.equals(""))
                        output.println("<H3>Please click back " + "button and fill in all " + "fileds.</H3>");
                        output.close();
                        return;
                   boolean success = insertIntoDB("'" + FirstName + "','" + LastName + "','" + Email + "','" + Login + "','" + Password + "'");
                   if (success)
                        output.print("<H2>Thank You " + FirstName + " for registering.</H2>");
                        res.sendRedirect("file:///Register.html");
                   else
                        output.print("<H2>An error occured. " + "Please try again later.</H2>");
                        output.close();
              private boolean insertIntoDB(String stringtoinsert)
                   try
                        statement = DBConn.createStatement();
                        statement.execute("INSERT INTO Users(user_id,FirstName,LastName,Email,Login,Password) values (" + stringtoinsert + ");");
                        statement.close();
                   catch (Exception e)
                        System.err.println("ERROR: Problems with adding new entry");
                        e.printStackTrace();
                        return false;
                   return true;
              public void destroy()
                   try
                        DBConn.close();
                   catch(Exception e)
                        System.err.println("Problem closing the database");
    Your Help will be very much appreciate.I am using SQL Server database

    The error concerns these two lines:
    boolean success = insertIntoDB("'" + FirstName + "','" + LastName + "','" + Email + "','" + Login + "','" + Password + "'");
    statement.execute("INSERT INTO Users(user_id,FirstName,LastName,Email,Login,Password) values (" + stringtoinsert + ");");
    In the first line above, you have a string which represents the VALUES which you are inserting. There are 5 values. However in the second line above this is your actual SQL execution you are specifying 6 columns of data. If the column "user_id" is an identity or auto-incrementing field in the database, just remove it from this line. If not then you need to supply the "UserID" into the VALUES.
    This should fix the problem.

  • Urgent help with simple BPEL process for reading data from database

    Hello there,
    I need help with BPEL project.
    i have created a table Employee in Database.
    I did create application, BPEL project and connection to the database properly using Database Adapter.
    I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
    Can someone please describe me step by step what i need to do.
    Thx,
    Dps

    I have created a table in Database with data like Empno,name,salary,comments.
    I created Database Connection in jsp page and connecting to BPEL process.
    It initiates the process and it goes automatically for approval.
    Please refer the code once which i created.
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
    "http://www.w3.org/TR/html4/loose.dtd">
    <%@page import="java.util.Map" %>
    <%@page import="com.oracle.bpel.client.Locator" %>
    <%@page import="com.oracle.bpel.client.NormalizedMessage" %>
    <%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
    <%@page import="javax.naming.Context" %>
    <%@page import="java.util.Hashtable" %>
    <%@page import="java.util.HashMap" %>
    <%@ page import="java.sql.*"%>
    <%@ page import= "jspprj.DBCon"%>
    <html>
    <head>
    <title>Invoke CreditRatingService</title>
    </head>
    <body>
    <%
    DBCon dbcon=new DBCon();
    Connection conn=dbcon.createConnection();
    Statement st=null;
    PreparedStatement pstmt=null;
    Hashtable env= new Hashtable();
    ResultSet rs = null;
    Map payload =null;
    try
    env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
    env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
    env.put("java.naming.security.principal", "username");
    env.put("java.naming.security.credentials", "password");//bpel console
    Locator locator = new Locator("default","password",env);
    IDeliveryService deliveryService =
    (IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
    // construct the normalized message and send to Oracle BPEL Process Manager
    NormalizedMessage nm = new NormalizedMessage();
    java.util.HashMap map = new HashMap();
    st=conn.createStatement();
    out.println("connected");
    String query1="Select * from EMPLOYEE";
    rs=st.executeQuery(query1);
    /*reading Data From Database and converting into XML format
    so that no need of going to BPEL console and entering the details.
    while (rs.next()){
    String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
    "<Empno>"+rs.getString(1)+"</Empno>"+
    "<EmpName>"+rs.getString(2)+"</EmpName>"+
    "<Salary>"+rs.getString(3)+"</Salary>"+
    "<Comments>"+rs.getString(4)+"</Comments>"+
    "</AsynchBPELProcess1ProcessRequest>";
    out.println(xml1);
    nm.addPart("payload", xml1 );
    // EmployeeApprovalProcess is the BPEL process in which human task is implemented
    deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
    // payload = res.getPayload();
    out.println( "BPELProcess CreditRatingService executed!<br>" );
    // out.println( "Credit Rating is " + payload.get("payload") );
    //Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
    catch(Exception ee) {
    //("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
    %>
    </body>
    </html>
    Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this.

  • JBO-26041: Failed to post data to database during "Insert": SQL Statement "

    Dear All,
    I am trying to insert the data into custom table,getting the following error. Please help me to resolve the issues.
    I have created one custom table in APPS schema having the primary key and History Columns.
    Created the EO based on the custom table and generate the create method.
    Created the VO based on the EO and generated the VOImpl, RowImpl Java Files.
    I am using the PER_PEOPLE_S sequence to populate the value into Primary key column.
    Calling the below code into create method of EO object to populate the value into Primarykey column.
    setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
    oracle.apps.fnd.framework.OAException: oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO XXUTS_PERSON_T(PERS_PERSONID,PERS_FIRSTNAME,PERS_LASTNAME,CREATION_DATE,CREATED_BY,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN) VALUES (?,?,?,?,?,?,?,?)".
         at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    ## Detail 0 ##
    java.sql.SQLException: ORA-00911: invalid character
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
         at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
         at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
         at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    java.sql.SQLException: ORA-00911: invalid character
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
         at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
         at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
         at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Thanksm
    Sai Sankilisetty

    Dear Kumar,
    I have checked the datatypes of the table and datatypes of the Pageitems, both the datatypes are same.
    I have created the region using the wizard based on the VO.
    My custom table having only 3 columns and History Columns.Out of 3 columns PersPersonid is Primary key column and I am assigning the sequence value to the column in create method of EO as below
    public void create(AttributeList attributeList) {
    super.create(attributeList);
    setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
    //Here PER_PEOPLE_S is the Sequence
    Thanks,
    Sai

Maybe you are looking for