Performance of the select query
i want to know wheter the conversion of the select query
SELECT * FROM mchb
WHERE matnr EQ mch1-matnr
AND charg EQ mch1-charg
AND werks EQ plant-werks.
itab-lgort = mchb-lgort.
itab-clabs = mchb-clabs.
APPEND itab.
ENDSELECT.
into following pattern
select lgort clabs
from mchb
into corresponding fields of itab
WHERE matnr EQ mch1-matnr
AND charg EQ mch1-charg
AND werks EQ plant-werks.
ENDSELECT.
will give the same results ?
Hi,
It will results in performance issue because of end select statement.
select lgort clabs
from mchb
into table itab
WHERE matnr EQ mch1-matnr
AND charg EQ mch1-charg
AND werks EQ plant-werks.
Use like this you will get the values of lgort and clabs in the internal table itab.
Then use loop statement to use that values further.
Dont use end select it will be a performance issue.
In this code there is no need to use of ENDSELECT and use corresponding fields of table itab.
select lgort clabs
from mchb
into corresponding fields of itab
WHERE matnr EQ mch1-matnr
AND charg EQ mch1-charg
AND werks EQ plant-werks.
ENDSELECT.
Thanks,
Sakthi
Similar Messages
-
Needed help to improve the performance of a select query?
Hi,
I have been preparing a report which involves data to be fetched from 4 to 5 different tables and calculation has to performed on some columns also,
i planned to write a single cursor to populate 1 temp table.i have used INLINE VIEW,EXISTS more frequently in the select query..please go through the query and suggest me a better way to restructure the query.
cursor c_acc_pickup_incr(p_branch_code varchar2, p_applDate date, p_st_dt date, p_ed_dt date) is
select sca.branch_code "BRANCH",
sca.cust_ac_no "ACCOUNT",
to_char(p_applDate, 'YYYYMM') "YEARMONTH",
sca.ccy "CURRENCY",
sca.account_class "PRODUCT",
sca.cust_no "CUSTOMER",
sca.ac_desc "DESCRIPTION",
null "LOW_BAL",
null "HIGH_BAL",
null "AVG_CR_BAL",
null "AVG_DR_BAL",
null "CR_DAYS",
null "DR_DAYS",
--null "CR_TURNOVER",
--null "DR_TURNOVER",
null "DR_OD_DAYS",
(select sum(gf.limit_amount * (scal.linkage_percentage / 100)) +
(case when (p_applDate >= sca.tod_limit_start_date and
p_applDate <= nvl(sca.tod_limit_end_date, p_applDate)) then
sca.tod_limit else 0 end) dd
from getm_facility gf, sttm_cust_account_linkages scal
where gf.line_code || gf.line_serial = scal.linked_ref_no
and cust_ac_no = sca.cust_ac_no) "OD_LIMIT",
--sc.credit_rating "CR_GRADE",
null "AVG_NET_BAL",
null "UNAUTH_OD_AMT",
sca.acy_blocked_amount "AMT_BLOCKED",
(select sum(amt)
from ictb_entries_history ieh
where ieh.acc = sca.cust_ac_no
and ieh.brn = sca.branch_code
and ieh.drcr = 'D'
and ieh.liqn = 'Y'
and ieh.entry_passed = 'Y'
and ieh.ent_dt between p_st_dt and p_ed_dt
and exists (
select * from ictm_pr_int ipi, ictm_rule_frm irf
where ipi.product_code = ieh.prod
and ipi.rule = irf.rule_id
and irf.book_flag = 'B')) "DR_INTEREST",
(select sum(amt)
from ictb_entries_history ieh
where ieh.acc = sca.cust_ac_no
and ieh.brn = sca.branch_code
and ieh.drcr = 'C'
and ieh.liqn = 'Y'
and ieh.entry_passed = 'Y'
and ieh.ent_dt between p_st_dt and p_ed_dt
and exists (
select * from ictm_pr_int ipi, ictm_rule_frm irf
where ipi.product_code = ieh.prod
and ipi.rule = irf.rule_id
and irf.book_flag = 'B')) "CR_INTEREST",
(select sum(amt) from ictb_entries_history ieh
where ieh.brn = sca.branch_code
and ieh.acc = sca.cust_ac_no
and ieh.ent_dt between p_st_dt and p_ed_dt
and exists (
select product_code
from ictm_product_definition ipd
where ipd.product_code = ieh.prod
and ipd.product_type = 'C')) "FEE_INCOME",
sca.record_stat "ACC_STATUS",
case when (trunc(sca.ac_open_date,'MM') = trunc(p_applDate,'MM')
and not exists (select 1
from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null))
then 1 else 0 end "NEW_ACC_FOR_THE_MONTH",
case when (trunc(sca.ac_open_date,'MM') = trunc(p_applDate,'MM')
and trunc(sc.cif_creation_date,'MM') = trunc(p_applDate,'MM')
and not exists (select 1
from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null))
then 1 else 0 end "NEW_ACC_FOR_NEW_CUST",
(select 1 from dual
where exists (select 1 from ictm_td_closure_renew itcr
where itcr.brn = sca.branch_code
and itcr.acc = sca.cust_ac_no
and itcr.renewal_date = sysdate)
or exists (select 1 from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null)) "RENEWED_OR_ROLLOVER",
(select maturity_date from ictm_acc ia
where ia.brn = sca.branch_code
and ia.acc = sca.cust_ac_no) "MATURITY_DATE",
sca.ac_stat_no_dr "DR_DISALLOWED",
sca.ac_stat_no_cr "CR_DISALLOWED",
sca.ac_stat_block "BLOCKED_ACC", Not Reqd
sca.ac_stat_dormant "DORMANT_ACC",
sca.ac_stat_stop_pay "STOP_PAY_ACC", --New
sca.ac_stat_frozen "FROZEN_ACC",
sca.ac_open_date "ACC_OPENING_DT",
sca.address1 "ADD_LINE_1",
sca.address2 "ADD_LINE_2",
sca.address3 "ADD_LINE_3",
sca.address4 "ADD_LINE_4",
sca.joint_ac_indicator "JOINT_ACC",
sca.acy_avl_bal "CR_BAL",
0 "DR_BAL",
0 "CR_BAL_LCY", t
0 "DR_BAL_LCY",
null "YTD_CR_MOVEMENT",
null "YTD_DR_MOVEMENT",
null "YTD_CR_MOVEMENT_LCY",
null "YTD_DR_MOVEMENT_LCY",
null "MTD_CR_MOVEMENT",
null "MTD_DR_MOVEMENT",
null "MTD_CR_MOVEMENT_LCY",
null "MTD_DR_MOVEMENT_LCY",
'N' "BRANCH_TRFR", --New
sca.provision_amount "PROVISION_AMT",
sca.account_type "ACCOUNT_TYPE",
nvl(sca.tod_limit, 0) "TOD_LIMIT",
nvl(sca.sublimit, 0) "SUB_LIMIT",
nvl(sca.tod_limit_start_date, global.min_date) "TOD_START_DATE",
nvl(sca.tod_limit_end_date, global.max_date) "TOD_END_DATE"
from sttm_cust_account sca, sttm_customer sc
where sca.branch_code = p_branch_code
and sca.cust_no = sc.customer_no
and ( exists (select 1 from actb_daily_log adl
where adl.ac_no = sca.cust_ac_no
and adl.ac_branch = sca.branch_code
and adl.trn_dt = p_applDate
and adl.auth_stat = 'A')
or exists (select 1 from catm_amount_blocks cab
where cab.account = sca.cust_ac_no
and cab.branch = sca.branch_code
and cab.effective_date = p_applDate
and cab.auth_stat = 'A')
or exists (select 1 from ictm_td_closure_renew itcr
where itcr.acc = sca.cust_ac_no
and itcr.brn = sca.branch_code
and itcr.renewal_date = p_applDate)
or exists (select 1 from sttm_ac_stat_change sasc
where sasc.cust_ac_no = sca.cust_ac_no
and sasc.branch_code = sca.branch_code
and sasc.status_change_date = p_applDate
and sasc.auth_stat = 'A')
or exists (select 1 from cstb_acc_brn_trfr_log cabtl
where cabtl.branch_code = sca.branch_code
and cabtl.cust_ac_no = sca.cust_ac_no
and cabtl.process_status = 'S'
and cabtl.process_date = p_applDate)
or exists (select 1 from sttbs_provision_history sph
where sph.branch_code = sca.branch_code
and sph.cust_ac_no = sca.cust_ac_no
and sph.esn_date = p_applDate)
or exists (select 1 from sttms_cust_account_dormancy scad
where scad.branch_code = sca.branch_code
and scad.cust_ac_no = sca.cust_ac_no
and scad.dormancy_start_dt = p_applDate)
or sca.maker_dt_stamp = p_applDate
or sca.status_since = p_applDate
l_tb_acc_det ty_tb_acc_det_int;
l_brnrec cvpks_utils.rec_brnlcy;
l_acbr_lcy sttms_branch.branch_lcy%type;
l_lcy_amount actbs_daily_log.lcy_amount%type;
l_xrate number;
l_dt_rec sttm_dates%rowtype;
l_acc_rec sttm_cust_account%rowtype;
l_acc_stat_row ty_r_acc_stat;
Edited by: user13710379 on Jan 7, 2012 12:18 AMI see it more like shown below (possibly with no inline selects
Try to get rid of the remaining inline selects ( left as an exercise ;) )
and rewrite traditional joins as ansi joins as problems might arise using mixed syntax as I have to leave so I don't have time to complete the query
select sca.branch_code "BRANCH",
sca.cust_ac_no "ACCOUNT",
to_char(p_applDate, 'YYYYMM') "YEARMONTH",
sca.ccy "CURRENCY",
sca.account_class "PRODUCT",
sca.cust_no "CUSTOMER",
sca.ac_desc "DESCRIPTION",
null "LOW_BAL",
null "HIGH_BAL",
null "AVG_CR_BAL",
null "AVG_DR_BAL",
null "CR_DAYS",
null "DR_DAYS",
-- null "CR_TURNOVER",
-- null "DR_TURNOVER",
null "DR_OD_DAYS",
w.dd "OD_LIMIT",
-- sc.credit_rating "CR_GRADE",
null "AVG_NET_BAL",
null "UNAUTH_OD_AMT",
sca.acy_blocked_amount "AMT_BLOCKED",
x.dr_int "DR_INTEREST",
x.cr_int "CR_INTEREST",
y.fee_amt "FEE_INCOME",
sca.record_stat "ACC_STATUS",
case when trunc(sca.ac_open_date,'MM') = trunc(p_applDate,'MM')
and not exists(select 1
from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null
then 1
else 0
end "NEW_ACC_FOR_THE_MONTH",
case when (trunc(sca.ac_open_date,'MM') = trunc(p_applDate,'MM')
and trunc(sc.cif_creation_date,'MM') = trunc(p_applDate,'MM')
and not exists(select 1
from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null
then 1
else 0
end "NEW_ACC_FOR_NEW_CUST",
(select 1 from dual
where exists(select 1
from ictm_td_closure_renew itcr
where itcr.brn = sca.branch_code
and itcr.acc = sca.cust_ac_no
and itcr.renewal_date = sysdate
or exists(select 1
from ictm_tdpayin_details itd
where itd.multimode_payopt = 'Y'
and itd.brn = sca.branch_code
and itd.acc = sca.cust_ac_no
and itd.multimode_offset_brn is not null
and itd.multimode_tdoffset_acc is not null
) "RENEWED_OR_ROLLOVER",
m.maturity_date "MATURITY_DATE",
sca.ac_stat_no_dr "DR_DISALLOWED",
sca.ac_stat_no_cr "CR_DISALLOWED",
-- sca.ac_stat_block "BLOCKED_ACC", --Not Reqd
sca.ac_stat_dormant "DORMANT_ACC",
sca.ac_stat_stop_pay "STOP_PAY_ACC", --New
sca.ac_stat_frozen "FROZEN_ACC",
sca.ac_open_date "ACC_OPENING_DT",
sca.address1 "ADD_LINE_1",
sca.address2 "ADD_LINE_2",
sca.address3 "ADD_LINE_3",
sca.address4 "ADD_LINE_4",
sca.joint_ac_indicator "JOINT_ACC",
sca.acy_avl_bal "CR_BAL",
0 "DR_BAL",
0 "CR_BAL_LCY", t
0 "DR_BAL_LCY",
null "YTD_CR_MOVEMENT",
null "YTD_DR_MOVEMENT",
null "YTD_CR_MOVEMENT_LCY",
null "YTD_DR_MOVEMENT_LCY",
null "MTD_CR_MOVEMENT",
null "MTD_DR_MOVEMENT",
null "MTD_CR_MOVEMENT_LCY",
null "MTD_DR_MOVEMENT_LCY",
'N' "BRANCH_TRFR", --New
sca.provision_amount "PROVISION_AMT",
sca.account_type "ACCOUNT_TYPE",
nvl(sca.tod_limit, 0) "TOD_LIMIT",
nvl(sca.sublimit, 0) "SUB_LIMIT",
nvl(sca.tod_limit_start_date, global.min_date) "TOD_START_DATE",
nvl(sca.tod_limit_end_date, global.max_date) "TOD_END_DATE"
from sttm_cust_account sca,
sttm_customer sc,
(select sca.cust_ac_no
sum(gf.limit_amount * (scal.linkage_percentage / 100)) +
case when p_applDate >= sca.tod_limit_start_date
and p_applDate <= nvl(sca.tod_limit_end_date, p_applDate)
then sca.tod_limit else 0
end
) dd
from sttm_cust_account sca
getm_facility gf,
sttm_cust_account_linkages scal
where gf.line_code || gf.line_serial = scal.linked_ref_no
and cust_ac_no = sca.cust_ac_no
group by sca.cust_ac_no
) w,
(select acc,
brn,
sum(decode(drcr,'D',amt)) dr_int,
sum(decode(drcr,'C',amt)) cr_int
from ictb_entries_history ieh
where ent_dt between p_st_dt and p_ed_dt
and drcr in ('C','D')
and liqn = 'Y'
and entry_passed = 'Y'
and exists(select null
from ictm_pr_int ipi,
ictm_rule_frm irf
where ipi.rule = irf.rule_id
and ipi.product_code = ieh.prod
and irf.book_flag = 'B'
group by acc,brn
) x,
(select acc,
brn,
sum(amt) fee_amt
from ictb_entries_history ieh
where ieh.ent_dt between p_st_dt and p_ed_dt
and exists(select product_code
from ictm_product_definition ipd
where ipd.product_code = ieh.prod
and ipd.product_type = 'C'
group by acc,brn
) y,
ictm_acc m,
(select sca.cust_ac_no,
sca.branch_code
coalesce(nvl2(coalesce(t1.ac_no,t1.ac_branch),'exists',null),
nvl2(coalesce(t2.account,t2.account),'exists',null),
nvl2(coalesce(t3.acc,t3.brn),'exists',null),
nvl2(coalesce(t4.cust_ac_no,t4.branch_code),'exists',null),
nvl2(coalesce(t5.cust_ac_no,t5.branch_code),'exists',null),
nvl2(coalesce(t6.cust_ac_no,t6.branch_code),'exists',null),
nvl2(coalesce(t7.cust_ac_no,t7.branch_code),'exists',null),
decode(sca.maker_dt_stamp,p_applDate,'exists'),
decode(sca.status_since,p_applDate,'exists')
) existence
from sttm_cust_account sca
left outer join
(select ac_no,ac_branch
from actb_daily_log
where trn_dt = p_applDate
and auth_stat = 'A'
) t1
on (sca.cust_ac_no = t1.ac_no
and sca.branch_code = t1.ac_branch
left outer join
(select account,account
from catm_amount_blocks
where effective_date = p_applDate
and auth_stat = 'A'
) t2
on (sca.cust_ac_no = t2.account
and sca.branch_code = t2.branch
left outer join
(select acc,brn
from ictm_td_closure_renew itcr
where renewal_date = p_applDate
) t3
on (sca.cust_ac_no = t3.acc
and sca.branch_code = t3.brn
left outer join
(select cust_ac_no,branch_code
from sttm_ac_stat_change
where status_change_date = p_applDate
and auth_stat = 'A'
) t4
on (sca.cust_ac_no = t4.cust_ac_no
and sca.branch_code = t4.branch_code
left outer join
(select cust_ac_no,branch_code
from cstb_acc_brn_trfr_log
where process_date = p_applDate
and process_status = 'S'
) t5
on (sca.cust_ac_no = t5.cust_ac_no
and sca.branch_code = t5.branch_code
left outer join
(select cust_ac_no,branch_code
from sttbs_provision_history
where esn_date = p_applDate
) t6
on (sca.cust_ac_no = t6.cust_ac_no
and sca.branch_code = t6.branch_code
left outer join
(select cust_ac_no,branch_code
from sttms_cust_account_dormancy
where dormancy_start_dt = p_applDate
) t7
on (sca.cust_ac_no = t7.cust_ac_no
and sca.branch_code = t7.branch_code
) z
where sca.branch_code = p_branch_code
and sca.cust_no = sc.customer_no
and sca.cust_ac_no = w.cust_ac_no
and sca.cust_ac_no = x.acc
and sca.branch_code = x.brn
and sca.cust_ac_no = y.acc
and sca.branch_code = y.brn
and sca.cust_ac_no = m.acc
and sca.branch_code = m.brn
and sca.cust_ac_no = z.sca.cust_ac_no
and sca.branch_code = z.branch_code
and z.existence is not nullRegards
Etbin -
How to optimize the select query that is executed in a cursor for loop?
Hi Friends,
I have executed the code below and clocked the times for every line of the code using DBMS_PROFILER.
CREATE OR REPLACE PROCEDURE TEST
AS
p_file_id NUMBER := 151;
v_shipper_ind ah_item.shipper_ind%TYPE;
v_sales_reserve_ind ah_item.special_sales_reserve_ind%TYPE;
v_location_indicator ah_item.exe_location_ind%TYPE;
CURSOR activity_c
IS
SELECT *
FROM ah_activity_internal
WHERE status_id = 30
AND file_id = p_file_id;
BEGIN
DBMS_PROFILER.start_profiler ('TEST');
FOR rec IN activity_c
LOOP
SELECT DISTINCT shipper_ind, special_sales_reserve_ind, exe_location_ind
INTO v_shipper_ind, v_sales_reserve_ind, v_location_indicator
FROM ah_item --464000 rows in this table
WHERE item_id_edw IN (
SELECT item_id_edw
FROM ah_item_xref --700000 rows in this table
WHERE item_code_cust = rec.item_code_cust
AND facility_num IN (
SELECT facility_code
FROM ah_chain_div_facility --17 rows in this table
WHERE chain_id = ah_internal_data_pkg.get_chain_id (p_file_id)
AND div_id = (SELECT div_id
FROM ah_div --8 rows in this table
WHERE division = rec.division)));
END LOOP;
DBMS_PROFILER.stop_profiler;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHEN TOO_MANY_ROWS
THEN
NULL;
END TEST;The SELECT query inside the cursor FOR LOOP took 773 seconds.
I have tried using BULK COLLECT instead of cursor for loop but it did not help.
When I took out the select query separately and executed with a sample value then it gave the results in a flash of second.
All the tables have primary key indexes.
Any ideas what can be done to make this code perform better?
Thanks,
Raj.As suggested I'd try merging the queries into a single SQL. You could also rewrite your IN clauses as JOINs and see if that helps, e.g.
SELECT DISTINCT ai.shipper_ind, ai.special_sales_reserve_ind, ai.exe_location_ind
INTO v_shipper_ind, v_sales_reserve_ind, v_location_indicator
FROM ah_item ai, ah_item_xref aix, ah_chain_div_facility acdf, ah_div ad
WHERE ai.item_id_edw = aix.item_id_edw
AND aix.item_code_cust = rec.item_code_cust
AND aix.facility_num = acdf.facility_code
AND acdf.chain_id = ah_internal_data_pkg.get_chain_id (p_file_id)
AND acdf.div_id = ad.div_id
AND ad.division = rec.division;ALSO: You are calling ah_internal_data_pkg.get_chain_id (p_file_id) every time. Why not do it outside the loop and just use a variable in the inner query? That will prevent context switching and improve speed.
Edited by: Dave Hemming on Dec 3, 2008 9:34 AM -
Performance issue with select query and for all entries.
hi,
i have a report to be performance tuned.
the database table has around 20 million entries and 25 fields.
so, the report fetches the distinct values of two fields using one select query.
so, the first select query fetches around 150 entries from the table for 2 fields.
then it applies some logic and eliminates some entries and makes entries around 80-90...
and then it again applies the select query on the same table using for all entries applied on the internal table with 80-90 entries...
in short,
it accesses the same database table twice.
so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
is around 80-90 entries too much for using "for all entries"?
the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
i really cant find the way out...
please help.chinmay kulkarni wrote:Chinmay,
Even though you tried to ask the question with detailed explanation, unfortunately it is still not clear.
It is perfectly fine to access the same database twice. If that is working for you, I don't think there is any need to change the logic. As Rob mentioned, 80 or 8000 records is not a problem in "for all entries" clause.
>
> so, i tried to get the database table in internal table and apply the logic on internal table and delete the unwanted entries.. but it gave me memory dump, and it wont take that huge amount of data into abap memory...
>
It is not clear what you tried to do here. Did you try to bring all 20 million records into an internal table? That will certainly cause the program to short dump with memory shortage.
> the logic that is applied to eliminate the entries from internal table is too long, and hence cannot be converted into where clause to convert it into single select..
>
That is fine. Actually, it is better (performance wise) to do much of the work in ABAP than writing a complex WHERE clause that might bog down the database. -
Need help in improving the performance for the sql query
Thanks in advance for helping me.
I was trying to improve the performance of the below query. I tried the following methods used merge instead of update, used bulk collect / Forall update, used ordered hint, created a temp table and upadated the target table using the same. The methods which I used did not improve any performance. The data count which is updated in the target table is 2 million records and the target table has 15 million records.
Any suggestions or solutions for improving performance are appreciated
SQL query:
update targettable tt
set mnop = 'G',
where ( x,y,z ) in
select a.x, a.y,a.z
from table1 a
where (a.x, a.y,a.z) not in (
select b.x,b.y,b.z
from table2 b
where 'O' = b.defg
and mnop = 'P'
and hijkl = 'UVW';987981 wrote:
I was trying to improve the performance of the below query. I tried the following methods used merge instead of update, used bulk collect / Forall update, used ordered hint, created a temp table and upadated the target table using the same. The methods which I used did not improve any performance. And that meant what? Surely if you spend all that time and effort to try various approaches, it should mean something? Failures are as important teachers as successes. You need to learn from failures too. :-)
The data count which is updated in the target table is 2 million records and the target table has 15 million records.Tables have rows btw, not records. Database people tend to get upset when rows are called records, as records exist in files and a database is not a mere collection of records and files.
The failure to find a single faster method with the approaches you tried, points to that you do not know what the actual performance problem is. And without knowing the problem, you still went ahead, guns blazing.
The very first step in dealing with any software engineering problem, is to identify the problem. Seeing the symptoms (slow performance) is still a long way from problem identification.
Part of identifying the performance problem, is understanding the workload. Just what does the code task the database to do?
From your comments, it needs to find 2 million rows from 15 million rows. Change these rows. And then write 2 million rows back to disk.
That is not a small workload. Simple example. Let's say that the 2 million row find is 1ms/row and the 2 million row write is also 1ms/row. This means a 66 minute workload. Due to the number of rows, an increase in time/row either way, will potentially have 2 million fold impact.
So where is the performance problem? Time spend finding the 2 million rows (where other tables need to be read, indexes used, etc)? Time spend writing the 2 million rows (where triggers and indexes need to be fired and maintained)? Both? -
How to improve the performance of the attached query, Please help
Hi,
How to improve performance of the below query, Please help. also attached explain plan -
SELECT Camp.Id,
rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount,
(SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
rCam.AccountKey as AccountKey
FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
WHERE Camp.AccountKey = rCam.AccountKey
AND Camp.AvCampaignKey = rCam.AvCampaignKey
AND Camp.AccountKey = CamBilling.AccountKey
AND Camp.CampaignKey = CamBilling.CampaignKey
AND rCam.AccountKey = xSite.AccountKey
AND rCam.AvSiteKey = xSite.AvSiteKey
AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
to_date('01-01-2011', 'DD-MM-YYYY')
GROUP By rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount
Explain Plan :-
Description Object_owner Object_name Cost Cardinality Bytes
SELECT STATEMENT, GOAL = ALL_ROWS 14 1 13
SORT AGGREGATE 1 13
VIEW GEMINI_REPORTING 14 1 13
HASH GROUP BY 14 1 103
NESTED LOOPS 13 1 103
HASH JOIN 12 1 85
TABLE ACCESS BY INDEX ROWID GEMINI_REPORTING RCAMSIT 2 4 100
NESTED LOOPS 9 5 325
HASH JOIN 7 1 40
SORT UNIQUE 2 1 18
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY SITE 2 1 18
INDEX RANGE SCAN GEMINI_PRIMARY SITE_I0 1 1
TABLE ACCESS FULL GEMINI_PRIMARY SITE 3 27 594
INDEX RANGE SCAN GEMINI_REPORTING RCAMSIT_I 1 1 5
TABLE ACCESS FULL GEMINI_PRIMARY CAMPAIGN 3 127 2540
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY CAMBILLING 1 1 18
INDEX UNIQUE SCAN GEMINI_PRIMARY CAMBILLING_U1 0 1Hello,
This has really nothing to do with the Oracle Forms product.
Please, send the SQL or/and PL/SQL questions in the corresponding forums.
Francois -
Need some help with the Select query.
Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
DeveloperHello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
Poor performance due to select query
Hey ppl,
I am facing a problem in one of the select query on BSEG.
The query is as given
TYPES :BEGIN OF wa1_bseg,
bukrs TYPE bseg-bukrs,
belnr TYPE bseg-belnr,
gjahr TYPE bseg-gjahr,
buzei TYPE bseg-buzei,
fwbas TYPE bseg-fwbas ,
pswbt TYPE bseg-pswbt,
hkont TYPE bseg-hkont,
wrbtr TYPE bseg-wrbtr,
ktosl TYPE bseg-ktosl,
koart TYPE bseg-koart,
shkzg TYPE bseg-shkzg,
mwskz TYPE bseg-mwskz,
qsskz TYPE bsis-qsskz,
dmbtr TYPE bseg-dmbtr,
flag TYPE C,
END OF wa1_bseg.
DATA: it_bsegv TYPE TABLE OF wa1_bseg WITH HEADER LINE.
SELECT bukrs belnr gjahr buzei fwbas pswbt hkont wrbtr ktosl shkzg koart mwskz
FROM bseg INTO TABLE it_bsegv
FOR ALL ENTRIES IN it_ekko
WHERE bukrs = 'MU51' AND
gjahr IN s_fiscal AND
valut IN s_budat1 AND
ebeln = it_ekko-ebeln.
Even if there are only around 5 records in it_ekko it takes very long time in executing. Sumtimes it even shows 'time out' in
foreground. Kindly help me out with itHi,
Go through this link it will helpful,
Re: Performance Issue with BKPF, BSEG, BSET
Re: Reading BSEG: performance problems
/people/rob.burbank/blog/2007/11/12/quickly-retrieving-fi-document-data-from-bseg
Regards
Adil
Edited by: Syed Abdul Adil on Jun 17, 2008 12:33 PM -
How to improve performance of the attached query
Hi,
How to improve performance of the below query, Please help. also attached explain plan -
SELECT Camp.Id,
rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount,
(SUM(rCam.Impressions) * 0.001 + SUM(rCam.Clickthrus)) AS GR,
rCam.AccountKey as AccountKey
FROM Campaign Camp, rCamSit rCam, CamBilling, Site xSite
WHERE Camp.AccountKey = rCam.AccountKey
AND Camp.AvCampaignKey = rCam.AvCampaignKey
AND Camp.AccountKey = CamBilling.AccountKey
AND Camp.CampaignKey = CamBilling.CampaignKey
AND rCam.AccountKey = xSite.AccountKey
AND rCam.AvSiteKey = xSite.AvSiteKey
AND rCam.RmWhen BETWEEN to_date('01-01-2009', 'DD-MM-YYYY') and
to_date('01-01-2011', 'DD-MM-YYYY')
GROUP By rCam.AccountKey,
Camp.Id,
CamBilling.Cpm,
CamBilling.Cpc,
CamBilling.FlatRate,
Camp.CampaignKey,
Camp.AccountKey,
CamBilling.billoncontractedamount
Explain Plan :-
Description Object_owner Object_name Cost Cardinality Bytes
SELECT STATEMENT, GOAL = ALL_ROWS 14 1 13
SORT AGGREGATE 1 13
VIEW GEMINI_REPORTING 14 1 13
HASH GROUP BY 14 1 103
NESTED LOOPS 13 1 103
HASH JOIN 12 1 85
TABLE ACCESS BY INDEX ROWID GEMINI_REPORTING RCAMSIT 2 4 100
NESTED LOOPS 9 5 325
HASH JOIN 7 1 40
SORT UNIQUE 2 1 18
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY SITE 2 1 18
INDEX RANGE SCAN GEMINI_PRIMARY SITE_I0 1 1
TABLE ACCESS FULL GEMINI_PRIMARY SITE 3 27 594
INDEX RANGE SCAN GEMINI_REPORTING RCAMSIT_I 1 1 5
TABLE ACCESS FULL GEMINI_PRIMARY CAMPAIGN 3 127 2540
TABLE ACCESS BY INDEX ROWID GEMINI_PRIMARY CAMBILLING 1 1 18
INDEX UNIQUE SCAN GEMINI_PRIMARY CAMBILLING_U1 0 1duplicate thread..
How to improve performance of attached query -
Using case when statement in the select query to create physical table
Hello,
I have a requirement where in I have to execute a case when statement with a session variable while creating a physical table using a select query. let me explain with an example.
I have a physical table based on a select table with one column.
SELECT 'VALUEOF(NQ_SESSION.NAME_PARAMETER)' AS NAME_PARAMETER FROM DUAL. Let me call this table as the NAME_PARAMETER table.
I also have a customer table.
In my dashboard that has two pages, Page 1 contains a table with the customer table with column navigation to my second dashboard page.
In my second dashboard page I created a dashboard report based on NAME_PARAMETER table and a prompt based on customer table that sets the NAME_ PARAMETER request variable.
EXECUTION
When i click on a particular customer, the prompt sets the variable NAME_PARAMETER and the NAME_PARAMETER table shows the appropriate customer.
everything works as expected. YE!!
Now i created another table called NAME_PARAMETER1 with a little modification to the earlier table. the query is as follows.
SELECT CASE WHEN 'VALUEOF(NQ_SESSION.NAME_PARAMETER)'='Customer 1' THEN 'TEST_MART1' ELSE TEST_MART2' END AS NAME_PARAMETER
FROM DUAL
Now I pull in this table into the second dashboard page along with the NAME_PARAMETER table report.
surprisingly, NAME_PARAMETER table report executes as is, but the other report based on the NAME_PARAMETER1 table fails with the following error.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1756 message: [Oracle][ODBC][Ora]ORA-01756: quoted string not properly terminated. [nQSError: 16014] SQL statement preparation failed. (HY000)
SQL Issued: SET VARIABLE NAME_PARAMETER='Novartis';SELECT NAME_PARAMETER.NAME_PARAMETER saw_0 FROM POC_ONE_DOT_TWO ORDER BY saw_0
If anyone has any explanation to this error and how we can achieve the same, please help.
Thanks.Hello,
Updates :) sorry.. the error was a stupid one.. I resolved and I got stuck at my next step.
I am creating a physical table using a select query. But I am trying to obtain the name of the table dynamically.
Here is what I am trying to do. the select query of the physical table is as follows.
SELECT CUSTOMER_ID AS CUSTOMER_ID, CUSTOMER_NAME AS CUSTOMER_NAME FROM 'VALUEOF(NQ_SESSION.SCHEMA_NAME)'.CUSTOMER.
The idea behind this is to obtain the data from the same table from different schemas dynamically based on what a session variable. Please let me know if there is a way to achieve this, if not please let me know if this can be achieved in any other method in OBIEE.
Thanks. -
How can i use index in select query.. facing problem with the select query.
Hi Friends,
I am facing a serious problem in one of the select query. It is taking a lot of time to fetch data in Production Scenario.
Here is the query:
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelat LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelatrprctr
WHERE rldnr = c_telstra_accounting
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
And rzzlstar in r_lstar
AND rpmax = c_max_period.
There are 5 indices present for Table ZTFTELAT.
Indices of ZTFTELAT:
Name Description
0 Primary key( RCLNT,RLDNR,RRCTY,RVERS,RYEAR,ROBJNR,SOBJNR,RTCUR,RUNIT,DRCRK,RPMAX)
005 Profit (RCLNT,RPRCTR)
1 Ledger, company code, account (RLDNR,RBUKRS, RACCT)
2 Ledger, company code, cost center (RLDNR, RBUKRS,RCNTR)
3 Account, cost center (RACCT,RCNTR)
4 RCLNT/RLDNR/RRCTY/RVERS/RYEAR/RZZAUFNR
Z01 Activity Type, Account (RZZLSTAR,RACCT)
Z02 RYEAR-RBUKRS- RZZZBER-RLDNR
Can anyone help me out why it is taking so much time and how we can reduce it ? and also tell me if I want to use index number 1 then how can I use?
Thanks in advance.Hi Shiva,
I am using two more select queries with the same manner ....
here are the other two select query :
***************1************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelpt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelptrprctr
WHERE rldnr = c_telstra_projects
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
and the second one is
*************************2************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelnt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelntrprctr
WHERE rldnr = c_telstra_networks
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
for both the above table program is taking very less time .... although both the table used in above queries have similar amount of data. And i can not remove the APPENDING CORRESPONDING. because i have to append the data after fetching from the tables. if i will not use it will delete all the data fetched earlier.
Thanks on advanced......
Sourabh -
Problem in the "select" query....Just check out and help me
Hi there !!
I am getting the following errors while trying to execute the "select" query from JSP page:
java.sql.SQLException: [Microsoft][ODBC Driver Manager] Invalid cursor state
My code is :
String reg_no=(String)session.getAttribute("reg_no");
ResultSet rs=stmt.executeQuery("SELECT * FROM reg WHERE regno = "+reg_no);
(Note: the "regno" in the database is of numeric datatype)
Try to help me...
Thanx,
Ram.Just so everyone knows:
Ram Mohan joined the forum on 7-Sep-2003 and received
his 25 Dukes for joining.
Since then, he's posted three questions, each one
promising 5-10 Dukes, and never once awarded them.
His strategy seems to be to wave Dukes, ask his
hit-and-run question, and then bolt.
Answer his questions if you wish, but don't do it
expecting Dukes. - MODDuffy, you're getting just as cranky as I have. See what hanging around these forums does to oneself? :) -
Performance optimization on select query for all entries
Hi All,
I want to optimize the select query in my Program.
The select query is taking lot of time to search the records for the given condition in the where clause
and more interestingly there are no records fetched from the database as the where condition does not matches.
It is taking more than 30 min to search the record and the result is no record found.
Below is my select query. I have also created the secondary Index for the same.
In My opinion FOR ALL ENTRIES is taking lot of time. Because there are more than 1200 records in internal table t_ajot
select banfn bnfpo bsart txz01 matnr Werks lgort matkl reswk menge meins flief ekorg
INTO CORRESPONDING FIELDS OF TABLE t_req
FROM eban
FOR ALL ENTRIES IN t_ajot
WHERE matkl >= t_ajot-matkl_low
AND matkl <= t_ajot-matkl_high
AND werks = t_ajot-werks
AND loekz = ' '
AND badat IN s_badat
AND bsart = 'NB'.
Please suggest.Hi,
that,
FOR ALL ENTRIES IN t_ajot
WHERE matkl >= t_ajot-matkl_low
AND matkl <= t_ajot-matkl_high
AND werks = t_ajot-werks
AND loekz = ' '
AND badat IN s_badat
AND bsart = 'NB'.
looks strange.
However:
How does your index look like?
What executoin plan do you get?
How do the statistics look like?
Whats the content of the variables t_ajot-... and s_badata?
Kind regards,
Hermann -
Restricting record in the select query
Is there any way to restrict the number of search (e.g 10) records in the SELECT query ?
Hi,
You can use as below:
select <fieldname> up to 10 rows from <tablename> into itab.
Thanks,
Sriram Ponna. -
How to insert the select query result into table?
How to insert the select query result into table?
SELECT top 20 creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
Thanks,
Tirumala1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com
Maybe you are looking for
-
Query using SDO in JDeveloper - NullPointer
I have this java lines for query: DocsOddcModuleServiceImpl docs = new DocsOddcModuleServiceImpl(); FindCriteria findCriteria = new FindCriteriaImpl(); FindControl findControl = new FindControlImpl(); DocsOddcVOSDOResult result = docs.findDocsOddcVO1
-
User exit in material creation
Hi, Can anyone help me to find a user-exit while saving a material in MM01? I need to validate the sales data of the material, table MVKE. Regards, Priya.
-
Missing content of BI statistics table?
Hi, Recently ( Two months back ) we have upgarded our BW system To BI 7.0 and also activated its Technical content! But the Table RSDDSTAT_OLAP has so many objects lists missing in its contents like infoprovider, Processchain, etc-- How to activate t
-
Just pruchased 7120. Doing set up got to the add paper for alignment The paper jammed and code says hit cancel button and restart. There is no cancel button . I cant clear the paper jam and the only button to access is the on/off button. Says
-
Does Apple provide clipart for Keynote
I switched from MS Office to iWorks. With Office, I had PowerPoint, it was easy to use and came with clipart. Keynote doesn't seem to have any clipart. Am I right? Where can i find clipart for Keynote and/or Pages?