Performance Tuning Section in Business Blueprint

Dear Gurus,
I am at a client location doing a blueprint. We are in the closure level of the business blueprint and one of the sections need to be added is the Performance Tuning. Can anybody suggest me what would be content to be added in the Performance Tuning section of blueprint. If anybody got the content section with them please forward that to my mail id, i.e. [email protected]
Thanks and regards
Vijay

Hi,
Think abt all BI is made up of an dhow to tune them..
Some hints:
1 Performance tuning for data loads : ( number range buffering, parallel loading..pseudo delta..chnging technical properties of tables if rec >100,000...IDOC clogging...etc)
2) Performnce tuing for Queries Aggregate...Cube modelling, OLAP cache....efficient multiprovider queries.etc.)
MEntion about transactiona whoich you will require for these things..such as RSRV..RSRTRACE..STO3n..ST05..etc...
gaurav

Similar Messages

Business Process Performance Tuning

Hi Pals,
I would like to request your help and inputs regarding tuning performance of Business process for my scenario.
I have created a synchronous Process with 3 message mapping transformation steps. ( inbetween Sync Receive and Sync Send steps). So its pretty simple process.
I am able to execute only 3500 processes per hour.
The SAP Netweaver Server m/c configuration is 2 dual core processors with 12 GB RAM.
Business process - Without buffering with multiple queues (content specific).
IE Logging - No sync logging, logging level - 0 ( so logging turned off )
I have tried out all the configurations mentioned in below weblogs, but with very less improvement in my case.
Performance Tuning Checks in SAP Exchange Infrastructure(XI): Part-III
Performance Tuning Checks in SAP Exchange Infrastructure(XI): Part-II
Performance Tuning Checks in SAP Exchange Infrastructure
I think something else is choking the execution, as the CPU or memory usage is not more than 10-20%.
Please pour in your inputs.
Thank you!
Best Regards,
Saravanan N

Thank you very much Bhavesh!
In my BPM, all the steps are set for "No New Transaction". So as to avoid any performance issue. But there is no improvement.
Even I have deleted all the work-items from Trxn: SWWL before the test.
From ST03N, for each process instance executed, four function modules takes the maximum time.
Function Module--No. of Calls--
Execution Time/RFC Call
TRFC_QIN_DEST_SHIP-- 1--
995 milliseconds
TRFC_QIN_ACTIVATE--1--
1077 milliseconds
ARFC_DEST_SHIP--2--
280 milliseconds
ARFC_RUN_NOWAIT--2--
402 milliseconds
Best Regards,
Saravanan N

SAP Business Objects Performance Tuning Guides

Hello everyone,
I'm currently looking for Performance Tuning guides for the hardware/software. In particular, parameters for the hardware. I'm having a hard time finding any kind of guides on the server side of Business Objects. So I'm wondering if anybody knows of some that are available on the internet or SAP site?
I've found very few in the software department. However, I'm looking more for the hardware portion of Business Objects. Basically the goal is to get the server as optimal as possible (As far as memory, parameters, CPU, etc) is concerned so we know it can't be a hardware issue. It's kind of narrowing down the potential problems we can have later on down the road so that's why this is very important right now.
Any help with this will be greatly appreciated. Thanks in advance. -Victor
Edited by: Victor Munker on Jul 14, 2010 3:52 PM

Here´s an updated version of that document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50770d8f-5606-3010-28a6-9e3bb14ec6a7?QuickLink=index&…
Cheers,
Esteban

BPC Performance Tuning

Hello,
Is there a guide for performance tuning a BPC installation? There are some items in the installation guide related to App Pool recycling and COM+ working with load balancing. I'm wondering if there are other recommendations or a best practices guide or article.

Hi Josef,
In the [BPC How To Guides page|http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides]
There is section called "Performance", under that section there is a [Business Planning and Consolidation 5.x Performance Tuning Guide|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9016a6b9-3309-2b10-2d91-8233450139c1] article.
Although this is old, most of the content still applies to BPC 7 and BPC 7.5
You should also review general SQL Server Database and [SQL Server Analysis Services performance tuning articles|http://www.google.com/url?sa=t&source=web&cd=2&ved=0CCsQFjAB&url=http%3A%2F%2Fwww.microsoft.com%2Fdownload%2Fen%2Fdetails.aspx%3Fid%3D17303&rct=j&q=sql%20server%20analysis%20services%20tuning%20forum&ei=SwhXTrmIDNTD0AGHwbzTDA&usg=AFQjCNEi2IFiAerH3dku5oGN8JqBw7Re0w&sig2=eQETRDioYNYS2UkHlb2_eA&cad=rja] which are available from Microsoft and other SQL Server forum's such as:
[http://www.sql-server-performance.com/]
[http://social.msdn.microsoft.com/forums/en-US/category/sqlserver/]
[http://www.sqlservercentral.com/]
[http://www.dbforums.com/microsoft-sql-server/]
Goodluck,
John

Report running for long time & performance tuning

Hi All,
(1). WebI report is running for long time.so what are the steps i need to check for it ?
(2). Can you tell me about performance tuning in BO ?
please help me.....
Thanks
Kumar

(1). WebI report is running for long time.so what are the steps i need to check for it ?
The first step is to see if the problem lies in the query on the data source or in webi itself. Depending on the data source there are different ways to extract the query and try to run it against the database. Which source does your report uses?
(2). Can you tell me about performance tuning in BO ?
I would recommend to start by reading the administrator's guide. There is a section about how to improve performance.
Regards,
Stratos

Performance tuning related issues

hi experts
i am new to performance tuning application. can any one share some stuff(bw3.5& bi7)related to the concern area.send any relavent docs to my id: [email protected] .
thanks in advance
regards
gavaskar
[email protected]

hi Gavaskar,
check this, you can download lot of performance materials
Business Intelligence Performance Tuning [original link is broken]
and e-learning -> intermediate course and advance course
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/fe5b0b5e-0501-0010-cd88-c871915ec3bf [original link is broken]
e.g
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/10b589ad-0701-0010-0299-e5c282b7aaad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/d9fd84ad-0701-0010-d9a5-ba726caa585d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/8e6183ad-0701-0010-e083-9ab1c6afe6f2
performance tools in bw 3.5
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/07a4f070-0701-0010-3b91-a6bf7644c98f
(here also you can download the presentation by righ click the disk drive icon)
hope this helps.

Performance Tuning in IR

Hello All,
We have created some reports using Interactive Reporting Studio. The volume of data in that Oracle database are huge and in some tables of the relational database are having above 3-4 crores rows individually. We have created the .oce connection file using the 'Oracle Net' option. Oracle client ver is 10g. We earlier created pivot, chart and report in those .bqy files but had to delete those where-ever possible to decrease the processing time for getting those report generated.
But deleting those from the file and retaining just the result section (the bare minimum part of the file) even not yet helped us out solving the performance issue fully. Still now, in some reports, system gives error message 'Out of Memory' at the time of processing those reports. The memory of the client PCs,wherefrom the reports are being generated are 1 - 1.5 GB. For some reports, even it takes 1-2 hours for saving the results after process. In some cases, the PCs gets hanged at the time of processing. When we extract the query of those reports in sql and run them in TOAD/SQL PLUS, they take not so much time like IR.
Would you please help us out in the aforesaid issue ASAP? Please share your views/tips/suggestions etc in respect of performance tuning for IR. All reply would be highly appreciated.
Regards,
Raj

SQL + & Toad are tools that send SQL and spool results; IR is a tool that sends a request to the database to run SQL and then fiddles with the results before the user is even told data has been received. You need to minimize the time spent by IR manipulating results into objects the user isn't even asking for.
When a request is made to the database, Hyperion will wait until all of the results have been received. Once ALL of the results have been received, then IR will make multiple passes to apply sorts, filters and computed items existing in the results section. For some unknown reason, those three steps are performed more inefficiently then they would be performed in a table section. Only after all of the computed items have been calculated, all filters applied and all sorts sorted, then IR will start to calculate any reports, charts and pivots. After all that is done, the report stops processing and the data has been "returned"
To increase performance, you need to fine tune your IR Services and your BQY docs. Replicate your DAS on your server - it can only transfer 2g before it dies, restarts and your requested document hangs. You can replicated the DAS multiple times and should do so to make sure there are enough resources available for any concurrent users to make necessary requests and have data delivered to them.
To tune your bqy documents...
1) Your Results section MUST be free of any sorts, filters, or computed items. Create a staging table and put any sorts or local filters there. Move as many of your computed items to your database request line and ask the database to make the calculation (either directly or through stored procedures) so you are not at the mercy of the client machine. Any computed items that cannot be moved to the request line, need to be put on your new staging table.
2) Ask the users to choose filters. Programmatically build dynamic filters based on what the user is looking for. The goal is to cast a net only as big as the user needs so you are not bringing back unnecessary data. Otherwise, you will bring your server and client machines to a grinding halt.
3) Halt any report pagination. Built your reports from their own tables and put a dummy filter on the table that forces 0 rows in the table until the report is invoked. Hyperion will paginate every report BEFORE it even tells the user it has results so this will prevent the user from waiting an hour while 1000s of pages are paginated across multiple reports
4) Halt any object rendering until request. Same as above - create a system programmically for the user to tell the bqy what they want so they are not waiting forever for a pivot and 2 reports to compile and paginate when they want just a chart.
5) Saved compressed documents
6) Unless this document can be run as a job, there should be NO results stored with the document but if you do save results with the document, store the calculations too so you at least don't have to wait for them to pass again.
7) Remove all duplicate images and keep the image file size small.
Hope this helps!
PS: I forgot to mention - aside from results sections, in documents where the results are NOT saved, additional table sections take up very, very, very small bits of file size and, as long as there are not excessively larger images the same is true for Reports, Pivots and Charts. Additionally, the impact of file size only matters when the user is requesting the document. The file size is never an issue when the user is processing the report because it has already been delivered to them and cached (in workspace and in the web client)
Edited by: user10899957 on Feb 10, 2009 6:07 AM

Oracle Application Performance Tuning

Hello all,
Please forgive me if I am asking this in the wrong section.
I am a s/w engineer with 2 years of exp. I have been working as a performance tuning resource for Oracle EBS in my company. The work mostly involved SQL tuning and dealing with indexes etc. In this time I took up interest in DBA stuff and I completed my OCA in Oracle 10g. Now my comany is giving me an oppurtunity to move into an Application DBA team and I am totally confused about it.
Becoming an Apps DBA will mean that the effort I put into the certification in 10g will be of no use. There are other papers for Apps DBA certification. Should I stay put in performance tuning & wait for a Core DBA chance or shall I accept the Apps DBA oppurtunity.
Also, does my exp. in SQL performace tuning hold any value as such with out an exposure to DBA activities?
Kindly guide me in this regards as I am very confused at this juncture.
Regards,
Jithin

Jithin wrote:
Hello bigdelboy , Thank you for your reply.
Yes, By oracle Apps DBA I meant Oracle EBS.
Clearing 1Z0-046 is an option. However, my doubt is will clearing both the exams Admin I and Admin II be of any help without having practical expericnce? The EBS DBA work involves support and patching, cloning, and new node setup etc.
Also, is my performance tuning experience going to help me in any way in the journey forward as a DBA/ EBS DBA?
Thank you for your valuable time.
Regards,
Jithin SarathThe way I read it is this.
People notice you are capable of understanding and performance tuning SQL. And you must have some knowledge of Oracle EBS. And in fact you also have a DBA OCA.
So there is a 98% + chance you can be made into a good Oracle Apps DBA (and core DBA). If I was in their position I'd want you on my team too; this is the way we used to bring on DBA's in the old days before certification and it has a lot of merit still. Okay you can only do limited tasks at first ... but the number of taks you can do will increase dramatically over a number of months.
I would imagine the Oracle Apps DBA will be delighted to have someone on board who can performance tune SQL which sometimes can sometimes seem more like an art than a science. The patching etc can be taught in small doses. If they are a good team they wont try to give you everything at once, they'll get you to learn one procedure at a time.
And remember, if in doubt ask; and if you dont understand ask again. And be safe rather than sorry on actions that could be critial.
If your worried about liinux: Linux Recipes For Oracle Dbas (Apress) might be a good book to read but could be expensive in India
Likewise: (Oracle Applications Dba Field Guide) may suit and even (Rman Recipes For Oracle Database 11 G: A Problem-solution Approach) may have some value if you need to get up to speed quickly in those areas.
These are not perfect but they sometimes consolidate the information neatly; however only buy if you feel they are cheap enough. You may well buy them and feel disappointed (These all happen to be by Apress who seem to have produced a number of good books ... they've also published some rubbish as well)
And go over the 2-day dba examples as well and linux install examples n OTN as well ... they are free compared to the books I mentioned.
Rgds -bigdelboy.

VAL_FIELD selection to determine RSDRI or MDX query: performance tuning

according to on of the HTG I am working on performance tuning. one of the tip is to try to query base members by using BAS(xxx) in the expension pane of BPC report.
I did so and found an interesting issue in one of the COPA report.
with income statement, when I choose one node gross_profit, saying BAS(GROSS_PROFIT), it generates RSDRI query as I can see in UJSTAT. when I choose its parent, BAS(DIRECT_INCOME), it generates MDX query!
I checked DIRECT_INCOME has three members, GROSS_PROFIT, SGA, REV_OTHER. , none of them has any formulars.
in stead of calling BAS(DIRECT_INCOME), I called BAS(GROSS_PROFIT),BAS(SGA),BAS(REV_OTHER), I got RSDRI query again.
so in smmary,
BAS(PARENT) =>MDX query.
BAS(CHILD1)=>RSDRI query.
BAS(CHILD2)=>RSDRI query.
BAS(CHILD3)=>RSDRI query.
BAS(CHILD1),BAS(CHILD2),BAS(CHILD3)=>RSDRI query
I know VAL_FIELD is SAP reserved name for BPC dimensions. my question is why BAS(PARENT) =>MDX query.?
interestingly I can repeat this behavior in my system. my intention is to always get RSDRI query,
George

Ok - it turns out that Crystal Reports disregards BEx Query variables when put in the Default Values section of the filter selection.
I had mine there and even though CR prompted me for the variables AND the SQL statement it generated had an INCLUDE statement with hose variables I could see by my result set that it still returned everything in the cube as if there was no restriction on Plant for instance.
I should have paid more attention to the Info message I got in the BEx Query Designed. It specifically states that the "Variable located in Default Values will be ignored in the MDX Access".
After moving the variables to the Characteristic Restrictions my report worked as expected. The slow response time is still an issue but at least it's not compounded by trying to retrieve all records in the cube while I'm expecting less than 2k.
Hope this helps someone else

Reg: Process Chain, query performance tuning steps

Hi All,
I come across a question like, There is a process chain of 20 processes.out of which 5 processes are completed at the 6th step error occured and it cannot be rectified. I should start the chain again from the 7th step.If i go to a prticular step i can do that particular step, How can i start the entair chain again from step 7.i know that i need to use a function module but i dont know the name of FM. Please somebody help me out.
Please let me know the steps involved in query performance tuning and aggregate tuning.
Thanks & Regards
Omkar.K

Hi,
Process Chain
Method 1 (when it fails in a step/request)
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
How is it possible to restart a process chain at a failed step/request?
Sometimes, it doesn't help to just set a request to green status in order to run the process chain from that step on to the end.
You need to set the failed request/step to green in the database as well as you need to raise the event that will force the process chain to run to the end from the next request/step on.
Therefore you need to open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
Now the actual process will be set to green and the following process in the chain will be started and the chain can run to the end.
Of course you can also set the state of a specific step in the chain to any other possible value like 'R' = ended with errors, 'F' = finished, 'X' = cancelled ....
Check out the value help on field rspcprocesslog-state in transaction se16 for the possible values.
Query performance tuning
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
/people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
/people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. --- sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
You can go to T-Code DB20 which gives you all the performance related information like
Partitions
Databases
Schemas
Buffer Pools
Tablespaces etc
use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
If aggregates contain incorrect data, you must regenerate them.
Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
Thanks,
JituK

LDAP Performance Tuning In Large Deployments - dir_chkcredentialsonreadonly parameter

Calendar users are experiencing long delays in logging in or updating a meeting
with many attendees or dates. This is especially notificeable after migrating
from calendar server 1.0x to calendar server 3.x.

At this time, calendar performance can be improved by up to 30% by reconfiguring
the calendar server to bind to it's directory server either anonymously or with
a specific user. The default is to bind as the user requesting directory
information.

There is a parameter that can be added in the server configuration file by
editing the /users/unison/misc/unison.ini file. For anonymous binds
adding the dir_chkcredentialsonreadonly line to the DAS section:

[DAS]
dir_updcalonly = TRUE
dir_connection = persistent
dir_service = LDAP,v2,NSCP,1
enable = TRUE
dir_chkcredentialsonreadonly = FALSE

For binding as a specific user, also add the following to the LDAP,..,...,,
section:

[LDAP...]
binddn = dn
bindpwd = password

Going forward, we are working on other changes in the next versions of the
Calendar Client and Calendar Server to improve performance. Please check with
your Netscape Sales contact for announcements on the availability of these
versions.


Thank you very much, I am looking from now for a good performance Tuning book writen by Jonathan Lewis. I dont think Jonathan can come to Spain and give lessons...Anyway I will email to him...
But, could you please clarify 2 points to me
1- Should I modify manually memory parameters like buffer cache, shared pool, large pool etc...if those areas are spotted Small and areas causes of performace problem in the AWR, ADDM or ASH reports even if the memory is automatic managed ?
In the case of yes, Why Oracle named it "Memory automatic managed" if I have to set some values of memory manually ?
2- When ADDM report suggests me to increase the SGA size; from where ADDM got this recomandation?. I mean is it recomandation based on statistics collected of Both Oracle and OS ? I am asking this question because, from our report I ran 3 weeks ago, ADDM suggested me to increase the SGA to 10GB (total memeory of the serve is 16GB), I did the change and from that moment the server is SWAP... and now ADDM report suggests me again to increase the SGA to 12GB .
Best reagards

LDAP Performance Tuning In Large Deployments - numconnect parameter

LDAP Performance Tuning In Large Deployments - numconnect parameter

Tuning the LDAP connections
(numconnect parameter)
This parameter translates directly into the number of unidas processes that will
be launched when Calendar Server is started. A process takes time to load, uses
RAM, and when active, CPU cycles. And, unidas maintains an LDAP client
connection to a Directory Server which can only support a fixed number of these
connections. Since a calendar client does not require constant directory access
then having a matching number of unidas processes (to match uniengd "client"
processes) is not a good configuration.
Basically, a calendar client will make many requests for LDAP information, even
if the event information being retrieved is not currently view able. For example,
if the calendar client is displaying a week view with 20 events and each event
has 5 attendees, that will translate into at least 100 separate ldap search
requests for the given name and surname of each attendee. What this means is
that an "active" calendar user will require the services of a calendar server
unidas connection quite often.
Recommendation is that you increase the number of unidas connections
to match the number of "active" calendar users. Our experience is that
at least 20% of the number of configured users (lck_users from the
/users/unison/misc/unison.ini file) are actually logged in, and 10% of
those calendar users are active. For example, if have 3000 configured
calendar users, 600 configured are logged in and 10% of the logged in
are active, which would translate into at least 60 unidas connections.
Keep in mind that configured vs logged in vs active might be different at each
customer site, so please adjust your number of unidas connections
accordingly. To set this up, edit the /users/unison/log/unison.ini file and add
the numconnect parameter to the section noted (where "hostname" is the name of
your local host):
[LCK]
lck_users = 600
[hostname,unidas]
numconnect = 60
The calendar server will need to be restarted after making changes
to the /users/unison/log/unison.ini file, before those changes will
take effect.
Note: Due to some architectural changes in the Calendar Server 4.x, the total
number of DAS connections should never be set higher than 250.
Recommendations for num_connect would be a maximum of 5% of logged on users.
However, keep in mind that 250 das connections is a very high number.
Example:
[LCK]
lck_users = 5000
[hostname,unidas]
numconnect = 250

Thank you very much, I am looking from now for a good performance Tuning book writen by Jonathan Lewis. I dont think Jonathan can come to Spain and give lessons...Anyway I will email to him...
But, could you please clarify 2 points to me
1- Should I modify manually memory parameters like buffer cache, shared pool, large pool etc...if those areas are spotted Small and areas causes of performace problem in the AWR, ADDM or ASH reports even if the memory is automatic managed ?
In the case of yes, Why Oracle named it "Memory automatic managed" if I have to set some values of memory manually ?
2- When ADDM report suggests me to increase the SGA size; from where ADDM got this recomandation?. I mean is it recomandation based on statistics collected of Both Oracle and OS ? I am asking this question because, from our report I ran 3 weeks ago, ADDM suggested me to increase the SGA to 10GB (total memeory of the serve is 16GB), I did the change and from that moment the server is SWAP... and now ADDM report suggests me again to increase the SGA to 12GB .
Best reagards

Performance tuning for new OFMW environment

Hello
We have just set up a new UAT environment entirely on all Oracle FMW latest products which includes:
1) OS -RHEL V5
2) WebCenter
3) SOA Suite
4) Database
5) IDM
6) HTTP Server
7) WebLogic Server
As as post infrastructure setup plan we need to to performance tuning as well. Shall we do only WLS performance tuning or we need to tune each and every product in order to get optimum results.
Any guide? resource to help?
Pls advice
Regards
Dev

When you install the product soa-suite (and probably webcenter too) a prerequisite check is performed
that gives information about packages and parameters that need to be adjusted on your operating system.
For products that run on WebLogic Server you probably have to tune the JVM, examples can be found here:
- http://middlewaremagic.com/weblogic/?p=6930 (discusses JRockit)
- http://middlewaremagic.com/weblogic/?p=7083 (focuses on Coherence, but the considerations can be applied to other environments as well)
Examples that set-up the SOA-Suite can be found here:
- http://middlewaremagic.com/weblogic/?p=6040 (discusses considerations when installing the SOA suite)
- http://middlewaremagic.com/weblogic/?p=6872 (discusses considerations when adding the web-tier to the SOA suite)
The enterprise deployment guides can help too:
- SOA Suite: http://download.oracle.com/docs/cd/E21764_01/core.1111/e12036/toc.htm
- WebCenter: http://download.oracle.com/docs/cd/E21764_01/core.1111/e12037/toc.htm
These also contain sections on integration with Oracle Identity Management and the Oracle HTTP Server

Invalid statement in Performance Tuning Guide

Oracle® Database Performance Tuning Guide
10g Release 2 (10.2)
Part Number B14211-01
13 The Query Optimizer
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/optimops.htm#sthref1324
excerpt:
"You can specify fast full index scans with the initialization parameter OPTIMIZER_FEATURES_ENABLE or the INDEX_FFS hint. Fast full index scans cannot be performed against bitmap indexes."
Emphasis mine - Gints
Here is counterexample:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> create table blah (sex varchar2(1) not null, data varchar2(4000));
Table created.
SQL> insert into blah select 'F', lpad('a', 4000, 'a') from user_objects where rownum<=10;
10 rows created.
SQL> insert into blah select 'M', lpad('a', 4000, 'a') from user_objects where rownum<=10;
10 rows created.
SQL> commit;
Commit complete.
SQL> create bitmap index sexidx on blah(sex);
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 'blah', cascade=>true)
PL/SQL procedure successfully completed.
SQL>
SQL> set autot traceonly expl
SQL> set lines 100
SQL> select count(*) from blah where sex = 'F';
SQL> /
Execution Plan
Plan hash value: 1028317341
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2 | 1 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 2 | | |
| 2 | BITMAP CONVERSION COUNT | | 10 | 20 | 1 (0)| 00:00:01 |
|* 3 | BITMAP INDEX FAST FULL SCAN| SEXIDX | | | | |
Predicate Information (identified by operation id):
 3 - filter("SEX"='F')
SQL> set autot off
SQL> alter session set events '10046 trace name context forever, level 12';
Session altered.
SQL> select count(*) from blah where sex = 'F';
COUNT(*)
 10
SQL> disconn
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining optionsand here is relevant section from tkprofed trace file assuring that bitmap index fast full scan really was performed.
select count(*)
from
blah where sex = 'F'
call count cpu elapsed disk query current rows
Parse 1 0.00 0.02 0 0 0 0
Execute 1 0.00 0.03 0 0 0 0
Fetch 2 0.00 0.00 0 3 0 1
total 4 0.00 0.05 0 3 0 1
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: 60
Rows Row Source Operation
 1 SORT AGGREGATE (cr=3 pr=0 pw=0 time=74 us)
 1 BITMAP CONVERSION COUNT (cr=3 pr=0 pw=0 time=55 us)
 1 BITMAP INDEX FAST FULL SCAN SEXIDX (cr=3 pr=0 pw=0 time=43 us)(object id 98446)Gints Plivna
http://www.gplivna.eu

Hello Gints. I've reported this to the writer responsible for the Performance Tuning Guide. One of us will get back to you with the resolution.
Regards,
Diana

Performance tuning content server

Hi,
I would like to profile my UCM based application. I am using Oracle content server 10g version and has custom java components for my business functionality. I would like to profile this application to identify performance bottlenecks. Is there any profiling tool in market that would get plugged /integrated with oracle content server (UCM 10g)?
What are the general tips for performance tuning custom components?
Thanks in advance
Siva

Some information can be found in the following document on Metalink :
Use VisualVM Tools to Troubleshoot UCM and Observe Performance Problems Occurring in Java Virtual Machine (Doc ID 950621.1)

Performance Tuning Section in Business Blueprint

Similar Messages

Maybe you are looking for