Periodic Aquisition Cost Error -Cost management
We have run the program Periodic Aquisition Cost but it error out. the Error is
CSTPPACQ.acq_cost_processor(30):ORA-01436: CONNECT BY loop in user data
Hi,
You have to create an expense type for Estimated cost.
Go to Travel Management-> Master data-> Create Expense Type
Maintain an Expense type called Estimated cost and select "Estimated cost,no reimbursmenent to employee" from "amounts are" drop down.
Assign this expense type to a wage type.
You will not get error once u maintain this expense type.
Thnaks and Regards,
Shilpashree.M.R
Similar Messages
-
Hi,
We have run the program Periodic Aquisition Cost but it error out. the Error is
CSTPPACQ.acq_cost_processor(30):ORA-01436: CONNECT BY loop in user data.
Plz guide me.Hello,
For this error, I think you should open an SR. It looks like patch 5378145 that is references in Metalink note 405966.1.
It could be useful to run the Cost manager in Trace mode, in order to get the statement that fails. -
Dear all,
I have got an error while creating service notification with reference to service contract(wv). I am getting an error like " no cost management is provided for sales document item : item no: 40000146
code : ix057 "
please send me the solution as soon as
thanks in advanceHi ,
Your thread is related to Customer Services Module, you can post such issues in Forum called u201CEnterprice Asset Managemnt (EAM)u201D in sdn. Sap. Forum.
This error is common when you maintain, service contract type u201CWVu201D.
W.r.t your proble just go to u201CVa42u201D and select your contract then for the line item you go to u201CProcurementu201D tab and change the u201CRequirment type u201C to u201CSE or KEu201D, save and execute.
Please make sure to maintain all configurations pertaining to service contract type u201CWVu201D in CS module .
I am sure this error will not be repeated.
If your thread is solved then please mark thread as solved
Thanks and Regards
DSR
Edited by: D.Srinivasa Rao on Nov 2, 2011 8:13 AM
Edited by: D.Srinivasa Rao on Nov 2, 2011 12:15 PM -
INV와 WIP TRANSACTION에 대한 COST MANAGER의 ERROR발생시 처리방법
제품 : MFG_INV
작성날짜 : 2004-05-20
INV와 WIP TRANSACTION에 대한 COST MANAGER의 ERROR발생시 처리방법
====================================================
PURPOSE
Inventory와 WIP Transaction에 대해 Inventory Cost manager가
정상적으로 작동하지 않고 Error가 발생한 경우, Data Fix방법에
대해 기술하고자 한다.
Explanation
Cost Manager는 다음의 Transaction들에 대해 처리한다.
1. Material transactions
2. WIP Resource transactions
Cost Manager가 수행 시 정상적으로 처리하지 못한 경우,
다음과 같이 Error처리를 한다.
(1) mtl_material_transactions의 costed_flag = 'E'
(2) wip_cost_txn_interface에 data가 존재한다.
:정상적으로 수행한 경우, Interface table에서 Record가 삭제된다.
1. To resolve the Material transactions:
Select request_id, costed_flag, transaction_group_id
from mtl_material_transactions
where costed_flag is not null;
(If this picks up any records - uncosted transactions exist).
update mtl_material_transactions
set request_id = null,
costed_flag = 'N',
transaction_group_id = null
where costed_flag is not null;
2. To resolve any WIP transactions:
Select request_id, group_id, process_status
from wip_cost_txn_interface;
(ie. only uncosted transactions exist in this table)
Update wip_cost_txn_interface
set request_id = null,
group_id = null,
process_status = 1;
The next Cost manager run should pick up the transactions and
reprocess them
Example
Reference Documents
------------------- -
Error in mtl_material_transactions Cost Manager
Hi,
I am using EBS-R12 I want to find per unit costl.But I find in mtl_material_transactions Costed_flag=E
and ERROR_EXPLANATION='The transaction date is not within the accounting period specified.' & inventory costing methods
is average.
I have update apply update
update mtl_material_transactions
set costed_flag = 'N',
transaction_group_id = NULL,
transaction_set_id = NULL
where costed_flag = 'E' or costed_flag = 'N' ;
and apply relaunch cost manager but Coted_flag remain unchanged.
Please help me about this issue.
Regards
OmarDear Hassan,
My problem is resolved now. I have apply update on mtl_material_transactions with period_id.
So thanks for cordial co-operations & positive approach.
Thanks
Omar
Edited by: user13140975 on Mar 10, 2012 11:59 AM -
Set batch management for reasons of cost management item cannot be deleted
Discovery was made that a material should have had batch management MARC-XCHPF selected. Within that time sales orders were created as well as sales order stock. 411E movements were done to get rid of the sales order stock, and it can not be seen in MMBE. MD04 is also clear. New attempt to add batch management in the plant displayed errors - SD Documents exist (orders or deliveries) that have not yet been
processed or that have been processed only in part.
Document Item
206365 000020
Attempt to remove item 20 from sales order and receive error
Message no. V1128
For reasons of cost management, item 000020 cannot be deleted.
Diagnosis
You tried to delete a sales document item for which cost management is carried out. Cost management can exist at item level for
- make-to-order production
- make-to-order stock
- service contract item
Procedure
Enter a reason for rejection at item level.
I found a similar problem on the forum but not really a solution other than throwing in the towel and making new materials.Hi
What I understand from your thread is:
You have chekced batchmanagement in
material master & after working some time you want to remove that tick mark.
First of all one should understand that for what ever reason batch management is ON, you can not reverse it .
Either activation or deactivation of batchmanagement is irreversible.
Oflat SAP had come with a note telling that how to proceed with reversal batch management.
I have gone through that note .Finally SAP wants to take consultancy with some fees to make reversal.
It is all pain ful job.
If you can do it abandom thta material & create new material.
This is the solution I can give.
Hope it is celar to you.
Regards
YMREDDY -
Landed Cost manager Program is scheduled to run everyday but it did not run
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
Thanks
De1006390 wrote:
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001 -
Slowness in Cost Manager costing the Inventory Transactions : performance
Hi All,
We have just upgraded to R12.0.6 and we are facing performance issues with the Cost Manager ..it is costing the Inventory/Material transactions very very slowly..about 1-2 Inventory transactions are getting costed within a minute.
The Actual Cost workers are taking a lot of time to process the transactions as well..
Could someone please suggest or help us troubleshoot this issue , as this very critical as we are facing this performance issue in 12.0.6 production enviornment.
Thanks
SachinHi,
Can you find any errors in the CM/DB log files? Do you run Gather Schema Statistics and Purge Concurrent Manager/Programs on regular basis?
Please see if these documents help.
Note: 387669.1 - Cost Manager Performance Issues
Note: 304313.1 - Understanding Cost Manager
Could someone please suggest or help us troubleshoot this issue , as this very critical as we are facing this performance issue in 12.0.6 production enviornment.If the issue with your production instance, I would suggest you log a SR.
Regards,
Hussein -
Change sales order - for reasons of cost management item cannot be deleted
Hello Friends,
When I try to delete a line item from sales order below error is fired and it doesnot allows to delete the items which has a WBS element.
The function name is :BAPI_SALESORDER_CHANGE
The error message is as below:
ORDER_HEADER_IN has been processed successfully
For reasons of cost management, item 001001 cannot be deleted
Error in ITEM_IN 001001
KONVKOM has been processed successfully
KONVKOM has been processed successfully
KONVKOM has been processed successfully
KONVKOM has been processed successfully
KONVKOM has been processed successfully
The sales document is not yet complete: Edit data
Sales document 0002012766 was not changed
Information
Sales order: 0002012766
Item : 001001
WBS element: 2012766-001 The wbs status is "REL"
I found a similar problem on the forum but not really a solution other than giving a suggestion as "Enter a reason for rejection at item level.".
but when I put the field ORDER_ITEM_IN-REASON_REJ = 'Z1' and ORDER_ITEM_INX-REASON_REJ = 'X',the error is still occurring.
'Z1'-WBS has been cancelled
How can I remove this item from the sales order?
Please help me.....
Best Regards,
bluebabyHello Lakshmipathi,
thank you very much for answering my question..
But how I get the file SAP note 14097,I was search this file in SDN and google but cannot find this file,if you know pls give me a hyperlink to view the content,thanks a lot.
Best regards,
Sophia -
Hi Experts,
Am facing a problem in Interface MAnager.
Sy
SELECT request_id RequestId,
request_date RequestDt,
phase_code Phase,
status_code Status FROM
fnd_concurrent_requests fcr,
fnd_concurrent_programs fcp
WHERE fcp.application_id = 702 AND
fcp.concurrent_program_name = 'CMCTCM' AND
fcr.concurrent_program_id = fcp.concurrent_program_id AND
fcr.program_application_id = 702 AND fcr.phase_code <> 'C'
The output of this showing Status is INACTIVE.
When i try to LAuch Cost MAnager am getting error like Cost MAnager is already running cancel first..
Wen query the cost manager in Request.. its not showing...
THanks in advance..Hi user;
concurent manager.. << your other thread. Please post once...
Regard
Helios -
Cost manager status is inactive with no manager(ERGENT)
Hi,
All the cost manager requests are running in error and the cost manager downs once the request is finished.
Error log:
APP-FND-01564: ORACLE error 12500 in AFPCOA
Cause: AFPCOA failed due to ORA-12500: TNS:listener failed to start a dedicated server process
The SQL statement being executed at the time of the error was: and was executed from the file .
/s01/oracle/prodappl/bom/11.5.0/bin/CMCTCM
Program exited with status 1
Thanks,
Sai MahadevHere is some infor about database:
SELECT NAME, BYTES FROM v$sgainfo;
fixed sga size --- 1337152
redo buffers --- 1048576
buffer cache size --- 5335154688
shared pool size --- 1056964608
large pool size --- 16777216
java pool size --- 16777216
streams pool size --- 0
granule size --- 16777216
maximum sga size --- 6442450944
startup overhead in shared pool --- 117440512
free sga memory available --- 0
select server,count(server) from v$session group by server;
server count(server)
dedicated 165
processes = 300
sessions = 600
Thanks,
Srikanth
Edited by: SaiMahadev on Dec 22, 2010 4:49 PM -
Cost manager status is inactive with no manager
APP-FND-01564: ORACLE error 12500 in AFPCOA
Cause: AFPCOA failed due to ORA-12500: TNS:listener failed to start a dedicated server process
The SQL statement being executed at the time of the error was: and was executed from the file .
/s01/oracle/prodappl/bom/11.5.0/bin/CMCTCM
Program exited with status 1
555448.1
Thanks,
SaiHi Sai;
APP-FND-01564: ORACLE error 12500 in AFPCOA
Cause: AFPCOA failed due to ORA-12500: TNS:listener failed to start a dedicated server process
The SQL statement being executed at the time of the error was: and was executed from the file .
/s01/oracle/prodappl/bom/11.5.0/bin/CMCTCM
Program exited with status 1What is your EBS version and OS? Please be sure adalnctl.sh working correctly.
Did you run autoconfign on appstier?If answer no please also run it.
Check below notes:
CMCTCM Cost Manager Fails with APP-FND-01564: ORACLE error 1841 in cmltcm [ID 360455.1]
CMCTCM Cost Manager Fails with APP-FND-01564: ORACLE error 1841 in cmltcm [ID 360455.1]
CMCTCM - Cost Manager Completes with APP-FND-01564 Error [ID 184592.1]
Also see:
Understanding Cost Manager [ID 304313.1]
CMCTCM - Cost Manager Completed With Error APP-FND-00126 [ID 314441.1]
CMCTCM - Cost Manager Completed With Error APP-FND-00126 [ID 314441.1]
Regard
Helios -
Creating Dynamic Time Series in Hyperion Profitability and Cost Management
I am creating Dimensions in Dimension Library for Hyperion Profitability and Cost Management. Please let me know if we can set Dynamic Time Series for HPCM.
I can see DTS Manager option for Period Dimension in Hyperion Planning but this option is not available for Period Dimension in HPCM Application.
Is there any other way to drill down upto weeks level or day level data in Time Series.I am also facing the same issue. Does we have any option to create Dynamic time series in HPCM. Please let me know.
-
Oracle Primavera Cost manager v 6.2 web access issue
Hi,
We are trying to integrate the cost manager for web access. However, after setting up the IIS for the latest version, an error message is generated saying the web access installation was interrupted abruptly.
Assistance is highly appreciated.
thank you,One other thing to check is that iptables on your Oracle VM Manager box/vm is not blocking the Oracle VM Manager UI, to test type /sbin/iptables status, if iptables running turn it off by typing /sbin/iptables stop.
-
ESYU: Cost Manager(CMCTCM)을 cancel 하고 다시 실행하는 방법
Purpose
Oracle Cost Management - Version: 11.5.9 to 11.5.10
Information in this document applies to any platform.
MTL_MATERIAL_TRANSACTIONS(MMT) table에 costed_flag = E 인 error transaction이
존재하는 경우 debug를 위해 cost manager를 다시 실행해야 될 경우가 있다.
보통 Cost Manager는 일정 주기로 running 되고 있기 때문에 이를 cancel 하는
작업이 필요하다.
여기서는 실행중인 Cost Manager를 cancel 하는 방법을 알아본다.
아래 사항을 방지하면서 Cost Manager를 cancel 하는 방법:
- 동시에 여러개의 Cost Manager가 launch 되는 것
- CMCTCM log에서 아래와 같은 warning message가 발생 되는것
" A Cost Manager is already launched.
Action: If you want to launch a new manager, cancel earlier manager first."
Solution
1. Cost Manager를 cancel: 아래 방법 중 하나를 선택한다.
a) Use Sysadmin responsability
Navigate to /Request/view
Set : specific Request=on
Name=Cost Manager.
Find request 화면의 아래쪽에 있는 "Select the Number of Days to view"
field에 9999를 입력한다.
조회된 Request 중 Pending Scheduled 상태의 Cost Manager request를
찾아 request를 cancel 한다.
b) Run
SELECT request_id RequestId,
request_date RequestDt,
concurrent_program_name,
phase_code Phase,
status_code Status
FROM fnd_concurrent_requests fcr,
fnd_concurrent_programs fcp
WHERE fcp.application_id = 702
AND fcp.concurrent_program_name in ('CMCTCM', 'CMCMCW', 'CMCACW')
AND fcr.concurrent_program_id = fcp.concurrent_program_id
AND fcr.program_application_id = 702 AND fcr.phase_code <> 'C';
위 script 결과로 나오는 모든 requests를 /Sysadmin / Concurrent / Request
화면에서 query 하고 모든 request를 cancel 한다.
이 request id를 query 시에도 역시 "Select the Number of Days to view" 값은
'9999'로 입력한다.
2. cmclean.sql script를 실행한다.(Note 134007.1 참조)
3. Cost Manager를 restart 한다.
Inventory / Setup / Transactions / Interface Managers
on line 'cost manager' - do Tools > Launch
Reference
Note 373207.1
Maybe you are looking for
-
I'm hopefully getting an iPhone 5 soon, & I'm just wondering if I could get a different carrier for the phone because I heard that AT&T is more expensive than the other carriers. At my house (for our computer & TV) we have AT&T. So, I'm just wonderin
-
I'm using Flash MX, AS 2, Projector 6, working on a PC. I saved two versions of my project -- one .exe for Windows and one .hqx for Mac. The .exe works fine when burned onto a CD. When opening the .hqx from a CD on a Mac, I got a message that the f
-
Impossible to connect to an ssh server with Mysecureshell
Hi, I have a SSH server (openssh) with MySecureShell and fail2ban installed. When I try to connect as an user whose shell is MySecureShell, I got "permission denied" (in terminal) or "critical error, impossible to connect" in filezilla. As soon as I
-
Having a problem using an Access 2003 database on a Windows 2012 Server
We have an old application developed in Visual Basic 6.0 with an Access 2003 database. We have recently migrated the application from a D-link data server to a new Windows Server 2012. At first everything seemed OK, but then the application began r
-
Hello all, I'm starting to learn flash and scripting and i have run into a problem. I have made navigational buttons to flags i have established in the time line, and i have tow movie clips, one that plays before the other. So far i have a stop actio