Periodic billing value is not dividing as per the months.

Hi,
While mapping periodic billing plan-my requirement is net value 10,000 should split into as per the end date months. But if we see the net value in billing plan is multiplying with the months as per the year i.e.130,000/- is coming which is wrong.
But it should come as 10,000/12= PER MONTH VALUE .(NET VALUE IN CONDITIONS/MONTHS).
Can you guide me to meet the requirement.

Hi Suman,
My sales order value is 10,000/- which I would like to charge my customer for the coming 13 months service.
I have maintained the same in my condition tab (Second screen shot).
But if I see my billing plan the net value is coming as 1,30,000/-. Means it is multiplying instead of dividing.
My requirement is 10,000/13 =
But currently coming as 10,000*13=.
Hope you got my problem.

Similar Messages

Excise base amount is not changing as per the scheduling agreement

Sub: in migo excise base amount is not changing as per the scheduling agreement type LP ( time dependent ).
I have created the scheduling agreement type LP with time dependent.
I have maintained the price value in two validated period i.e
01/07/08 to 31/07/08 price is 100 rs.
01/08/08 to 31/08/08 price is 200 rs.
I have maintained the delivery schedule on
15/07/08 of quantity 1 nos.
When I am doing the goods receipts for the scheduling agreement on
Document date I am giving 15/07/08.
Posting date I am giving 15/07/08.
I am giving the posting date in the excise also 15/07/08.
After item ok.
When I will the excise base value it is taking 200 and also excise duty is also calculating on 200.
When I will post the document
The stock account and GR/IR account is taking 100 only
And excise duty is posting for rs: 200 only
Why the excise base value is not changing as per the validity period.
What setting I have to do the change the excise base value as per the validity date maintained in the time dependent .
regards
jrp

dear sir
doc date and posting date i have given 15/07/08 and also excise posting date i have given 15/07/08,
but excise base value it is taking Rs:200 .
in inforecord price date category 5-goods recepit date i have given
yes i ahve changed the excise base value it will post , if i will not change the excise base value i will post rs:200 only and GR/IR clearing account will post Rs100 only.
why the excise base value will not take based on the time dependent.
regards
JRP

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

Key value does not currently exist in the primary key table error

Im testing out a form and creating a new insert once all the fields are filled in it wont allow me to move on and comes up with this error message;
key value does not currently exist in the primary key table
Is this becuase the form contains foriegn keys which reference different tables which fields are not dispalyed on this form?
If so how to I link the other forms together so that when i create a new record in this form it will automaticaly create the primary key entry in the other form to allow the insert of the referenced foreign key in this form?
does this make sense?

It seems that it has the table in which you'r inserting is a foreign key table.
Take the emp& dept table example in the schema scott/tiger.
Say we have deptno 10, 20, 30, 40 in the dept table.
We make a form for emp table and insert into this form.
Now, we'r bound to insert deptno 10, 20, 30, 40 into this emp form. This form will not allow us to insert deptno 50 as it doesn't exist in the primary key column in dept table.
Obviously if a department doesn't exist in the company, it doesn't make sense to assign the employees to that department.
So for this purpose, we need to add a department in the dept table then we can insert values in the emp table for that department.
For this purpose, I suggest to make a button on the mp form and invoke the dept form and add a new department to it and then insert into emp table.
The same scenario can be applied in your case.

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!

Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now?

I am looking to purchase the software, not rent it by the month. Where do I look to do this?

I am looking to purchase the software, not rent it by the month. Where do I look to do this?

Hi Ron ,
Please refer to the following link to get details about the purchase of Acrobat.
http://www.adobe.com/misc/subscription_terms.html
You may also refer to the following link to get more details about the subscription.
https://helpx.adobe.com/x-productkb/policy-pricing/acrobat-pro-xi-subscription-faqs.html#i d_83547
Hope this will help.
Regards
Sukrit Dhingra

Billing Value is not updating in Cube for 2lis_13_vditm

Hi All,
I am getting Billing Value in PSA for 2lis_13_vditm, while its not getting updated in 0SD_C03 Cube. My transfer rules and transformation both are activated.
In PSA, i am getting Billing value for M and I both document category, while in cube I am getting value 0 for both document category.
I am not getting any error message.
Thanks in Advance,
Rishit

Hello,
Please check if there are any Start Routines , Char Routines or End routines written in the transformation
Also check if a constant is assigned to it.
Waiting for your feedback
Regards
Nitin Bhatia

Shorter contract date, periodic billing plan reduced, not reflected in ECC

Hi,
We get quite a lot similar problems with service contracts with billing plan.
Because of new type of contracts (other material number) being sold to our customers, the old contract will change end date, let's say from 31.12.2012 to 31.05.2011. Next the line item will be put to completed.
The periodic monthly billing plan in CRM now only show billing dates as to 01.05.2011 which is correct.
However on the ECC side, the created contract still show the future lines of the billing plan with status open.
As a result they still appear in the billing due lists.
The problem does not seem to be situated in the middleware.
I changed the contract end date to 31.12.2013 (so even further in the future than in the initial status) and in ECC I see additional lines created for billing.
Now if I bring back the contract end date to 31.05.2011 the extra lines in ECC are gone (period 01.01.2013 - 31.12.2013), but all lines for period 01.06.2011 - 31.12.2012 stay in overall processing status "Open" because they are "Not invoiced".
Anyone came accross the same issue and knows how to solve it?
Best regards,
Geert

Reason was incorrect processing sequence in changing contract dates

Net bill value - why not possible in SAP

hai,
I have one basic doubt. Why SAP is not showing the balance amount of the bill? ex bill value is Rs.10000.00 partpayment received Rs.5000.00 in sap for partpayment, the saparate document is creating but it is not deducting the bill amount. Why it's not showing the balance as Rs.5000.00.
Is there any logic.
govind.

hai Anand,
Like bill is Rs.10000.00 ( inv.no 100)
Part payment 1 - Rs.5000.00 (ref inv.No 100)
Part Payment 2 - Rs.4000.00 (ref inv.No.100)
Part Payment 3 - Rs.1000.00 instead of that if i enter Rs.3000.00 it will also accept and in reference detail it will show the same invoice number what we have adjustedin earlier.
while entering the part payment 3, if exceed Rs.1000.00 the system dont want to allow the entry. Is it possible.
govind.

Posting period 011 2013 is not open while posting the document using F-02 getting the error

Hi SAP Captains,
Pls help me here.
While posting the document using T-code F-02 getting the error "Posting period 011 2013 is not open.
Please help me how to do, can you provide step by step.
Rgds..Suresh

Hi Suresh,
You can search google and will get number of posts on this. This will lead to duplication of similar posts on forum.
The message says "FI posting period is closed for 11th period of 2013". In which period you are trying to post the transaction?
If it is past, open the FI posting periods in OB52.
BR, Srinivas Salpala

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Place Holder values are not displaying when calling the report

Hi,
I have a Place holder column in my report and i am assigning the values in a formula column. When i run the report from report builder place holder column is showing the value. But when i deploy the same in application server and i try to invoke from a form it is not the value of that place holder column. Why is this happening? Please, help me in resolving the same.
Thanks & Rgds,
M T

Yes Gayatri. You are right. When i run the report from report builder it is working perfectly. The same report i deployed in application server and invoking from a form report is not showing the values for place holder columns.
Why is this happening?
How to resolve it?

Got 5 itunes bills and did not purchase any of the games listed

my wife has got 5 itunes bills and she did not purchase any of the games that were listed on there.the reciept numbers are:
1700*****491
1700*****490
2130*****175
2130*****175
2130*****176
2130*****177
123*****901
her account email is *****
many thanks,
Ali
<Edited By Host>

Hello, abumishary.
Thank you for visiting Apple Support Communities.
I would recommend reporting a problem with the purchase via the steps in the article below.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
You can also report an issue with this purchase by accessing your purchases history in iTunes on your computer.
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Cheers,
Jason H.

Process chians r not running as per the scheduled time.

Hi sriends,
Unable to run the process chains(back ground).
Every day our process chains r runing properly but all of sudden they are not triggering on the specified time and there is no error msg.
pls give me some idea to resolve this....
Thanks in advance,
Reddy.

Hi Ram,
You need to go and check the released Job of your Process Chain. Go to Planning View of your Process Chain, then right click on your start variant and check for "Display all Jobs".
Then it will show the list of all finished and released Job. Check whether the finished Jobs are having any delay. If there is any delay then it is related to your system performance. If not double click on the released JOb and check the schduling details.
Hope it helps!!!
Cheers,
Neelesh Jain.

The date should be divided based on the month

Hi Team,
I have two fields A and B.Iam fetching vbeln and erdat from VBAK.it is in the Format YYYY/MM/DD.
suppose i get the values from 2009/10/01 to 2009/11/18.
Now all the values from 2009/10/01 to 2009/10/31 should be in A.
The values from 2009/11/01 to 2009/11/18 should be in B.
The Exact month values should be displayed in A the remaining days values of the next month should be displayed in B.
Suppose i have the values from 2006/09/11 to 2006/10/31.Now A should contain the values from 2006/09/11 to 2006/09/30
and B contains from 2006/10/01 to 2006/10/31.
Can you please suggest how to write the logic.
Hope the requirement is clear.
Regards,
Pradeep P.

loop at itab into wa.
check the wa-erdat+4(2) " month number..
if month in range of dates...
add value to A
else.
add value to B
endif.
endloop.

Periodic billing value is not dividing as per the months.

Similar Messages

Maybe you are looking for