Periodically there is an "not found" error

Dear Gurus!
After a successful use of ria services for a long time from some moment "Not found" error occurs. After recompiling program or rerun VS 2012 an error may disappear. After that an error does not occurs. However, it occasionally
reappears after another compiling program. I use ria services , PRISM, some my wcf services. What may be the reason? Any ideas will be appreciated.

Unfortunately it was necessary for a while to switch to another project (WPF).
Now I installed Entity Framework 6.1.3 , but the problem remains. I attached simple project with authorization, which using ria services project with authorization
в System.ServiceModel.DomainServices.Client.ApplicationServices.WebAuthenticationService.EndLoadUser(IAsyncResult asyncResult)
   в System.ServiceModel.DomainServices.Client.ApplicationServices.LoadUserOperation.EndCore(IAsyncResult asyncResult)
   в System.ServiceModel.DomainServices.Client.ApplicationServices.AuthenticationOperation.End(IAsyncResult result)
Caused
by: Удаленный сервер возвратил ошибку:
NotFound.
в System.ServiceModel.DomainServices.Client.WebDomainClient`1.EndQueryCore(IAsyncResult asyncResult)
   в System.ServiceModel.DomainServices.Client.DomainClient.EndQuery(IAsyncResult asyncResult)
   в System.ServiceModel.DomainServices.Client.DomainContext.CompleteLoad(IAsyncResult asyncResult)
Caused
by: Удаленный сервер возвратил ошибку:
NotFound.
в System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
   в System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   в System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)
Caused
by: Удаленный сервер возвратил ошибку:
NotFound.
в System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
   в System.Net.Browser.BrowserHttpWebRequest.<>c__DisplayClassa.<EndGetResponse>b__9(Object sendState)
   в System.Net.Browser.AsyncHelper.<>c__DisplayClass4.<BeginOnUI>b__0(Object sendState)
P.S. I use this video to
create this example.

Similar Messages

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File Not Found Error on Fresh MX7 Installation

After spending days getting CFMX 7.0.2 installed on a CentOS5.3 (production) server running Apache 2.2.3 and WHM/cPanel 11, by religiously following Bill Mitchell's lifesaving guide, CF is up and running but I cannot access the administrator or anything else in user public_html directories.
If I place a simple foo bar test file in the /usr/local/apache/htdocs/testfile.cfm directory, I can call it at http://[IPaddress]/testfile.cfm and it parses properly.
However, if I place the same file at /home/cfusion/public_html/testfile.cfm and call it at http://[IPaddress]/~cfusion/testfile.cfm, I get a CF-generated 404 "File Not Found" error.
cfusion is a cPanel account I created via WHM prior to installing ColdFusion as a repository for my CFIDE directory.
If I place a symlink for /usr/local/apache/htdocs/CFIDE -> /home/cfusion/public_html/CFIDE:"File Not Found". If I cp -R my CFIDE into htdocs: "File Not Found." These files are physically there. I can easily verify that of course. But CF is still saying File Not Found. In fact, if I disconnect Apache - JRun, Apache finds the files all by itself no problem. They are definitely there.
I thought this might be a permissions issue, but all my .cfm files are nobody:root 775.
Here's what I'm seeing in the exception.log:
coldfusion.runtime.TemplateNotFoundException: File not found: /~cfusion/filetest.cfm
    at coldfusion.filter.PathFilter.invoke(PathFilter.java:83)
    at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
    at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
    at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
    at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
    at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
    at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
    at coldfusion.CfmServlet.service(CfmServlet.java:107)
    at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
    at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
    at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
    at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
    at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
I guess maybe I need to know where the config for webroots is set from the CF/JRun perspective? I'm a decent hand with web server admin stuff, but despite being a CF dev for 10 years, CF admin stuff is still a bit over my head. Any help would be GREATLY appreciated. I'm at my wit's end!

Thanks Mack. I set verbose to true in my httpd.conf, restarted Apache, restarted CF, but I can't see any difference in the logging. Errors seem the same, and no additional info.
The Apache error_log file is filled with cryptic stuff that looks like it's referencing JRun. Does any of this mean anything to you? Is there another log file I should be looking at?
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] filterRequest:   no match
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: r is 0x9d1aa98, server is 0x99df290, virtual 1
[Thu Aug 06 00:06:52 2009] [notice] jrApache[8608: 15070] jrun_service: no handler, return DECLINED
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] jrun_trans: r is 0x9d169d8, server is 0x99df290, virtual 1
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910]     HOST: <null>
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 01:10:01 2009] [notice] jrApache[8548: 18910] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474]     HOST: <null>
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filtering / (/usr/local/apache/htdocs/) HOST=null
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] filterRequest:   no match
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_trans: sub-request so DECLINED
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: r is 0x9e5b930, server is 0x99df290, virtual 1
[Thu Aug 06 00:11:53 2009] [notice] jrApache[8518: 55474] jrun_service: no handler, return DECLINED
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] jrun_trans: r is 0x9f96cc8, server is 0x99df290, virtual 1
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314]     HOST: <null>
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filtering /whm-server-status (/usr/local/apache/htdocs/whm-server-status) HOST=null
[Thu Aug 06 00:15:01 2009] [notice] jrApache[8519: 59314] filterRequest:   no match

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
when this is extracted it leaves me with Disk1, 2, and 3
install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
i even triwd the same download from edelivery.oracle.com and gives the same madness
am stuck.

i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
error reads :
-error cheching the existence of the SYSMAN user in Management repository
-exception occured while connecting to database . please check the connection details you specified and retry
-io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
REP DB HOSTNAME:SA-OMS-01
PORT:1521
SERVICE/SID:OMSDB01
SYSMAN PASSWORD:PASS
THE REST I PUT PASS AS PASSWORD
NOT SURE WHAT TO DO NEXT.

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

In Firefox, I keep getting "Server not found" error - CONSTANTLY!

Two days ago I started getting the "server not found" error, off and on, daily. It is happening on both my desktop iMac 10.7, and my Windows 7 laptop. I keep having to hit the "Try Again" butting, and sometimes, several times, before a web site will finally launch. The only two extensions I have on both, are the Adblock Plus and the Last Tab Close Button, both of which, have been installed on said computers for months and months and months.
I went in and changed a setting to the "auto detect proxy setting", hoping that would work, and it did not.
I have Firefox version 21 on both computers, and it seems the problem started shortly after this latest Firefox update, and at the SAME TIME on both computers.
I do not have virus protection on my iMac, nor on my Windows 7 laptop, at the moment, but I have run online software to check for anything, and no issues, so I believe, it is not that which is the issue.
The firewalls on both computers are working fine and no issues there either, I have not changed any firewall settings, on either computer. It couldn't be the firewall, in my opinion, because this annoying error message started happening on BOTH of my computers, at the same time; I work on my iMac in the morning, then switch to my laptop in the afternoon, and same issue continues on both, and started at the same time, on both.
Is there something broken in Firefox from this last update of the browser?
Does anyone have any suggestions as to why both computers are having this issue, at the same time?
I have not tried using I.E. yet on my laptop, I rarely have ever needed to use that browser, and I hate it, so I don't use it.
Any help or suggestions, would be appreciated.

I followed those steps, but clearly some steps are missing. How do you "enable each extension one at a time"? The only choices I see in Safe Mode are "disable" and "remove."
And why is it that every other update to Firefox breaks Firefox? I've had to install add-ons just to be able to use it in Windows 8 with a touchpad.
Now that I think of it, it doesn't even matter any more. After years of Firefox loyalty (even after Firefox users have dropped to 28%), I'm off to download Google Chrome (up to 52%). I'll miss Firefox, but not the on-again, off-again performance.

Page not found error getting while access endeca application

Hi All,
I am trying to create an application in endeca. Created application , ran neccessary scripts and created pages in experience manager.
but when i try to call the application in browser . i am getting page not found error. There are some other application which is created by copying discover electronics ,
which works fine. Please help me how can i resolve this issue. I am using endeca 3.1.0.
Thanks
Mark

There's not much to go on here, but it sounds like you're trying to view changes in a "live" application. To confirm this, you should execute the configuration promotion script and then check the same application URL. You can run the promote script from inside workbench. Log in as admin, then look under "Workbench Home > Administration > Admin Console > Scripts." You should execute the "PromoteAuthoringToLive" script. Once this script is complete, then test your page again.
If this works, then it means that your application is configured such that it doesn't get immediately notified of new configuration changes, i.e. it's configured in "live" mode.

"Page not found" error while trying to run a page

Hello all,
I tried to run a page in JDeveloper(9.0.6.6_606) and after the browser page pops up, it is displaying "HTTP 404 : Page not found" error.
Please find the log below:
C:\jdevbin\jdk\bin\javaw.exe -ojvm -classpath C:\jdevbin\j2ee\home\oc4j.jar -mx256m -Dhttp.proxyHost=proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=10.200.152.236|localhost -Xverify:none com.evermind.server.OC4JServer -config C:\jdevhome\jdev\system9.0.3.1.1107\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Embedded OC4J startup time: 7047 ms.
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Embedded OC4J startup time: 16 ms.
Target URL -- http://10.200.152.236:8988/OA_HTML/runregion.jsp?page=%2Foracle%2Fapps%2Fpos%2Faccount%2Fwebui%2FNonPoInvCreatePG&akAppShortName=POS&akDbcFile=FIN1DEV2&akDevMode=1&akDiag=1&akPassword=pwd4dev2&akRespKey=ISUPPLIER_PORTAL_RESP&akUsername=dpsdx48&JRAD_XML_PATH=C%3A%5Cjdevhome%5Cjdev%5Cmyclasses%5CJRADXML%5C&JRADStartTime=1152606872484
ApplicationServer: appName = bc4j
ApplicationServer: appName = current-workspace-app
ApplicationServer: appName = soap
Error creating the ORB :
Starting an OA Core session ...
ICX DIAGNOSTIC: application_id = 177
ICX DIAGNOSTIC: responsibility_id = 23075
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: APPS Web agent = http://app-fin1dev2.albertsons.com:15160/pls/FIN1DEV2/
FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX DIAGNOSTIC: mCookieHeader = FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX_DIAGNOSTIC: mEncryptedSessionID = C384A6C2A84C8E63FAA51365BA91681A
ICX_DIAGNOSTIC: mSessionID = 687703439
TIME: runregion.sessionBean.createSession [87296 ms]
ICX_DIAGNOSTIC: mTransactionID = 78453
ICX_DIAGNOSTIC: encryptedTransactionID = C974A13EBB894B23
TIME: runregion.sessionBean.createTransaction [9672 ms]
TIME: runregion.rest [0 ms]
Is there anything you think I am missing in the configurations?
Kindly help.

I am also using OA Framework Jdeveloper....for ADF BC development.. Please find the log below:-
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config>
E:\jdeveloper\jdevbin\jdk\bin\javaw.exe -client -classpath E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar;E:\jdeveloper\jdevbin\jdev\lib\jdev-oc4j-embedded.jar
-Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true
-Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\xml.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it
contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazn.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/j2ee/home/jazn.jar (from <code-source> in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different
versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazncore.jar (from manifest of /E:/jdeveloper/jdevbin/jdev/appslibrt/jazn.jar) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/j2ee/home/jazncore.jar (from <code-source> in META-INF/boot.xml in
E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the
search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from
WEB-INF/lib/ directory in E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/jdev/appslibrt/uix2.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it
will be masked as the latter is already visible in the search path of loader datatags.web.webapp:0.0.0.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 19594 ms.
Target URL--- http://hydhtcl33997.ad.infosys.com:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx
07/10/18 11:56:56 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized

"Not Found" Error Message Problem

Hi All!
I have a really weird issue happening that I have not found a post for in the boards, although there are some similar ones. I have a video project that I had been working on about a month ago and finished except for credits (I had no problems while working on it then). I finally just got the list of names to use for the credits, so I went to open the project to add the credits and I got a "Not Found" and "Out Of Memory" Message. I have 134.6 Gigs open on the Raid I save everything to, so I know I'm not actually out of memory. So I changed the settings to 80% Application and 50% Stills b/c I have around 10 jpegs I was using for titles in it. That seemed to help at least get the sequence opened. I then had media offline messages for those titles, eventhough they are in the browser and defined as online, so I just reconnected each one individually anyway. That helped with that problem. However, I FCP won't render the transitions around the titles. I deleted the transitions and titles and tried to re-render the video clips that were involved in the transitions with the titles. It won't render those. When I try to view the clips in the viewer, I get the "Not Found" message again. I reconnected a couple of the video clips individually, but I still get the message when I try to view them in the Viewer. The clips in the sequence are there and play in the canvas but not in the viewer and I get the "Not Found" message. I have it set to view the image without wireframes, so that's not the problem. The source videos are read as online in the browser and are in the same place as they were when I originally started the project, so that's not the problem. I've tried different variations on the memory usage. I've tried copying and pasting to a new sequence but get the same problem. Does anyone know why all of a sudden I can't view any of my source video and the clips I used in my sequence in the viewer and why it would give me the "Not Found" error message?
Some Specs that might be helpful:
FCP HD 4.5
Dual 2 GHz PowerPC G5
2.5 Gigs DDR SDRAM
Raid 1 with 134.6 Gigs Available Space
SD NTSC DV Footage - MPG files I transfered originally from the client's portable hard drive
A Few JPGs of Photoshop Titles
I'm sorry this is insanely long, but I wanted to provide as much detail as I could.
Emily

They were originally on a PC. That quite possibly could be it.
I just checked all the titles again and they are all RGB.
Our Raid ocassionally has problems, so I'm thinking it might have something to do with that.
I'm going to try on Monday to just re-import the videos I need into the project and see how that goes. If anyone has any suggestions, I'll take a look on Monday and see what happens.
I was just hoping that someone might have had this problem and knew what to do.
Thanks for your help!

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

TS1544 "keychain not found" error messages pop up all the time, please help!

Hi, Ive been constantly getting "keychain not found" error messages ever since i updated to OS X and cant sync messages, facetime, calendars etc. i've tried keychain first aid and get this message:
Verification started
Checking keychain configuration for Lee (user ID=501)
Home directory is /Users/Lee
Checked login keychain
Error: login keychain not found
Unable to get info for ~/Library/Keychains/login.keychain, reason: The operation couldn’t be completed. No such file or directory
Checked default keychain
Checked keychain search list
Problems were found; you should choose the Repair option to fix them
Verification failed
Can anyone help?
Thanks

Is there a login.keychain in /Users/username/Library/Keychains/? The message says not. If not, create a new one or restore the one residing in your bootable backup/clone or Time Machine backup.

Reading .txt file into char array, file not found error. (Basic IO)

Iv been having some trouble with reading characters from a text file into a char array. I havnt been learning io for very long but i think im getting the hang of it. Reading and writing raw bytes
and things like that. But i wanted to try using java.io.FileReader to read characters for a change and im having problems with file not found errors. here is the code.
try
File theFile = new File("Mr.DocumentReadMe.txt");
String path = theFile.getCanonicalPath();
FileReader readMe = new FileReader(path);
char buffer[] = new char[(int)theFile.length()];
int readData = 0;
while(readData != -1)
readData = readMe.read(buffer);
jEditorPane1.setText(String.valueOf(buffer));
catch(Exception e)
JOptionPane.showMessageDialog(null, e,
"Error!", JOptionPane.ERROR_MESSAGE);
The error is: java.io.FileNotFoundException: C:\Users\Kaylan\Documents\NetBeansProjects\Mr.Document\dist\Mr.DocumentReadMe.txt (The system cannot find the file specified)
The text file is saved in the projects dist folder. I have tried saving it elsewhere and get the same error with a different pathname.
I can use JFileChooser to get a file and read it into a char array with no problem, why doesnt it work when i specify the path manually in the code?

Well the file clearly isn't there. Maybe it has a .txt.txt extensionthat Windows is kindly hiding from you - check its Properties.
But:
String path = theFile.getCanonicalPath();
FileReader readMe = new FileReader(path);You don't need all that. Just:
FileReader readMe = new FileReader(theFile);And:
char buffer[] = new char[(int)theFile.length()];You don't need a buffer the size of the file, this is bad practice. Use 8192 or whatever.
while(readData != -1)
readData = readMe.read(buffer);
}That doesn't make sense. Read the data into the buffer and repeat until you get EOF? and do nothing with the contents of the buffer? The canonical read loop in Java goes like this:
while ((count = in.read(buffer)) > 0)
out.write(buffer, 0, count); // or do something else with buffer[0..count-1].
jEditorPane1.setText(String.valueOf(buffer));Bzzt. That won't give you the content of 'buffer'. Use new String(buffer, 0, count) at least.

Periodically there is an "not found" error

Similar Messages

Maybe you are looking for