Perioed End Closing Collective Transaction Excluding Some Projects

Greeting,
During period end closing of April, and while running CJ45 (Collective Overhead Processing) by selecting the variant. Some projects where not shown in the processed list. When running them using CJ44 (individual Overhead Processing), overhead is applied for them. The same occurs with the settlement process using collective and individual transactions for the same projects.
What could case this to happen?
Taking in consideration that these projects have no budget in 2010, just accruals. Also, the previous periods (i.e. Jan, Feb and Mar) went without such situation.
Regards,

Hi,
If you are able to run it by using Individual processing and not by collective processing, then please check the selection criteria defined in the Selection variant for collective processing. This could be the reason for omitting few projects.
Regards,
Kabir

Similar Messages

  • Question: howto end a gui transaction after some nonactivity time?

    Hi guru's,
    Our users are using TMW (trx PTMW) on a regular basis for entering time data.  It would be real nice to encourage them to close their TMW screens when they have done.
    It would be real nice if the TMW gui (or any other program they leave idle, example PA30) would get cancelled after X minutes of idle time.  Any pending non saved changes may get lost.
    I' ve looked at the rdisp/gui_auto_logout parameter.  But this cancels the whole session and so they need to log on again.  We'd just like it if they return to their easy access startmenu.
    Any suggestions how to do this? (a system parameter? repair of TMW? job that ends idle gui's?)  I'll reward any usefull suggestion
    Kr,
    Jonathan

    I would be interested to know what the solution for this is. Could you please let me know?

  • Project Accounting Month end Closing Process

    Dear Experts,
    Any one can help me by explaining Project Accounting Month End Closing Process
    Thanks & Regards
    Bharath

    Bharath
    1. Clear all the transactions from Interface tables
    2. Import them
    3. Run all the Expenditures (PRC, Interface processes) make sure none of the expenditures are not accounted
    4. Run Borrow and Lent process if any, Transfer to GL
    5. Run Revenue Process, make sure revenue is generated, accounted
    6. Review the revenue draft versions created, make sure all revenue draft versions are released
    7. INterface revenue to GL, then later Tie back process
    8. Run the Invoicing process
    9. Make sure to Approve, release all the Invoices in draft version
    10. Interface to AR ( ensure that none of the records are in error)
    11. Auto Invoice Import in AR
    12. Tieback process in PA
    13. run Exc: Transaction Exception details by GL Period/ PA period , Exc: Transaction Exception summary by GL Period/ PA Period
    14. Make sure the report output on step 13 are blank, if yes try to clear all the transactions and re run the reports
    15. Now try closing the period
    Thanks
    Krishna

  • Month End Closing Procedure.

    Hi,
    Can some one send me month end closing activites carried out with  T Code to my mail id is [email protected]
    Points will awarded.
    Regards,
    Kiran.

    Hi
    Month end activitites with Transaction code :
    FI
    AFAB - calculate depreciation
    F.05 Foreigh Currency valuation
    F.5D calcualate balancesheet adjustment (in case of business area adjusment)
    F.5E post balance sheet adjustment
    CO.
    1. Overhead : CO43 - Collective Processing
    2. WIP :KKAO - Calculate
    3. Variance:KKS1 - Collective Processing
    4. settlement:CO88 - Collective Processing
    5. Assessment cycle :KSU5
    If the answer is helpful kindly assign points
    Thanks & Regards
    Mahesh

  • Xl reporter shows different result before and after Period-End Closing.

    Hi SAP experts,
    We have an issue with XL Reporter. When we ran Period-End closing and ran XL - PL Period & YTD (with the same parameters), XLR shows nil in the Actual YTD column and the monthly figures are out by a big difference (example pre-rollover it was $110K after rollover it shows negative $12M).
    This happens on 2 different clients running 2 different SAP B1 (2007A PL 42 and 8.8 PL 13) on the same XL Reporter which is possibly the default XL report that comes with the installation.
    I don't have any idea why the XLR is running 2 different figures altogether when running the same XLR using the same parameter before and after rolling the year over. The default SAP B1 P&L report stays the same before and after the rollover, I would have expect that the same would happen with the XLR.
    Please advise.
    Regards,
    Didy Arfiono

    Hi Julie,
    Thanks for the reply. I'm not entirely sure what you mean by excluding a certain transaction for closing entries as this would defeat the whole purpose of PEC which as you stated was to transfer P&L balances to retained earnings account to be carried forward.
    I've check at some guides including one from Orchestra Team (http://www.youtube.com/watch?v=e4tUo774eXg) and so far the process that I've done is exactly what it is.
    Regards,
    Didy

  • Period End closing in controlling module.

    Hi Gurus,
    In our project, we have implemented FI, CO , MM, SD, PP, PM, and HR modules with payrolls. Our project has gone live this month(05.02.2007).
    Can anybody explain what are the steps to be taken for period closing in controlling.
    Some Production orders which are in process do not have standard cost estimates, what is the impact in WIP Calculation.
    Please also give info on how to transfer the Personnel Cost from HR Cost Centers to deferent production orders.
    Thanks in Advance
    Ganesh

    here is the list for FI/CO year end closing check list:
      1 Execute Report for InterCompany Activity & Journal Entries
      2 Open posting period for next yr
      3 Run Business Area's Assignment report.
      4 Review list of recurring journal entries
      5 Execute Recurring Entries for A/R, A/P, G/L
      6 Process Parked A/R, A/P, G/L accounting documents
      7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
      8 Run Depreciation in Test Run and post
      9 Verify Display Log for Depreciation Test Run
    10 Capitalize AUC Assets if needed
    11 Enter Payroll Data to SAP
    12 Verify Depreciation Balances  with GL balances
    13 Post Depreciation
    14 Execute Asset History Report, and retire assets if needed
    15 Adjust specific depreciation areas if necessary
    16 Reconcile AM subledger with GL
    17 Check Bank Data
    18 Review AR Open Items
    19 Review AP Open Items
    20 Execute Pending Invoices
    21 Clear Open Item for GRIR, freight
    22 Reconciliation of Financial Documents and transactional figures
    23 Open new CO Posting Period
    24 Compare current  (cost estimates) with last current price (Moving Avg)
    25 Update current cost price to material master price field.
    26 Process Freight charges, Match SD freight to actual
    27 Review Internal Order Postings
    28 Settle All Orders
    29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
    30 Review SD Billng Doc from prior mth that have not yet been released to accounting
    31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
    32 Reconcile PI Inventory with SAP
    33 Perform Manual Adjustment if needed
    34 Verify balance of the GR/IR account
    35 Post Accruals and Deferrals
    36 Clearing of Cancelled Documents
    37 Check Profitability Segment Adjustment
    38 Aging Report-Reconcile GL balances with  subledger  balances AP
    39 Check the check run numbers
    40 Bank reconciliation Data
    41 Enter Tax Journal Entry
    42 Reconcile GL balances with  subledger  balances AR/MM/AP
    43 Display Balance Sheet Adjustments
    44 Post Balance Sheet Adjustments
    45 Post Foreign Currency Valuation (foreign exchange)
    46 Check generic cost centers for posting with wrong accounts
    47 Correct wrong postings on generic cost centers
    48 Check Validation dates for Cost Centers, Cost Elements, CO area
    49 Check COGI--for both month end and year end
    50 Doubtful receiviables
    51 Verify In-transist Inventory
    52 Reconcile PA to G/L
    53 Post Cost Centre Assessments and Distributions
    54 Run CO-FI Reconciliation to balance
    55 Run BW reports P&L and Balance Sheet
    56 Maintain CO yr variant
    57 Fiscal Yr Balance carryforward AP/AR/AM
    58 Fiscal Yr Balance carryforward CO
    59 Fiscal Yr balance carryforward FI
    60 Fiscal Yr balance carryforward PCA
    61 Set Document number ranges - FI - new year
    62 Set Document number ranges  AP/AR - new year
    63 Generate Financial statement Reports
    64 Change Fiscal Year For Assets
    65 Year end Closing-- Asset Accounting--final for year end
    66 Close CO Posting Period
    67 Close Prior A/R Posting Period
    68 Close Prior A/P Posting Period
    69 Close Prior MM Posting Period
    70 Reverse accruals and deferrals for the new month
    71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
    72 Load Balances, Budget Data for Cost centers, sales
    73 Update Retained Earning Account , balance carry fwd
    please reward points if useful.

  • Settlement for month-end closing, individual production or sales order

    Dear SAP Experts,
    Our style is MTO.
    In month-end closing, we follow to make a settlement for production orders:
    1. CO43   -- Actual overhead calculation (collective processing)
    2. KSU5   -- Actual allocations Assessment
    3. KSII     -- Actual Price Calculation
    4. CON2  -- Revaluation at actual prices (collective processing)
    5. KKAO -- WIP calculation (collective processing)
    6. CO88  -- Production order settlement (collective processing)
    Question:
    1. What kind accounts will be effected after above each step?
    2.  does individual production settlement need step 1-4 in above?
        1. KKAX (Work in Process)
        2. KO88 (Settlement)
        Is those enough?
    3. What kind account will be effected after va44 processing?
    Any tips will be welcome.
    Zhou Zhen

    Hi,
    The value flow completely different for each of the MTO Scenario.
    I need to know what kind of MTO scenario you have.
    is it MTO - Valuated Sale Order without Sale Order Controlling
    Is it MTO - Valuated Sale Order with Sale Order Controling
    is it MTO- Non-valuated Sale Order (Sale Order controlling is mandatory)
    based on this the value flows and the transaction that need to be executed will differ.
    The way you explained i presume that it could be any of the first two scenarios.
    in such case, the value flows are as good as make to stock scenario. Only in the third scenario, the value flow completely changes
    For 1. What kind accounts will be effected after above each step?
    all the accounts relevant for Make to Stock will get affected. But the the scenario is MTO - Valuated Sale Order with Sale Order Controling, the the variances from production order is settled to Sale order instead of settling to COPA.
    For 2. does individual production settlement need step 1-4 in above?
    All the steps from 1 to 6 are necessary for any of the above 3 scenarios
    For 3. What kind account will be effected after va44 processing?
    This is for calculating the overheads on the sale order. in this case, the sale order is a controlling object. once this t.code is executed, you can see the oh being calculated on the sale order
    Hope this will give some good isight in to various MTO scenarios
    Best Regards
    Surya

  • Program RFSUMB00 year end closing in Italy.

    Hello All,
    I am setting up all the configurations for year end closing in Italy using program RFSUMB00. Here i need some clarification on the below points.
    1. dummy vendor / customer master needs to be created for each recon account. here i would like to know whtr we need to create a dummy recon account for dummy vendor / custome? if no, how would postings be happen.?
    2. we need b/s opening and closing accounts for this prog. I would like to know wht entries will happen at the year end and whtr all b/s closing postings will happen to same account?

    Hi,
    I hope dummy accounts are not required. Please try as below. For balance sheet closing and opening accounts you can use technical accounts which we use for initial balance uploading. This program will generate one closing entry and one opening entry with the help of technical account what I have mentioned so that the balances will become ZERO in previous FY.
    Closing entry happens in previous fiscal year and opening entry will posted in current FY.
    Please go for FAGL_IT_02 - Italy (New). Do not go for F_IT_01 - Italy. There are some prerequisites before executing this program.
    Please close normal periods of previous fiscal year and ensure that special periods of previous fiscal year are opened. Means special periods should be available for postings.
    Closing postings should happen in special periods. Try with 14th period.
    I suggest to run this program only in L1 ledger as this only legal requirement.
    Below is for your reference where July to June Fiscal year is maintained.
    P&L Account                              550016 (result of PNL account)
    Net Result Account                     101001 (Retained earning account)
    Balance Sheet Account- Closing  800005  (Technical account)
    Balance Sheet Account- Opening  800005 (Technical account)
    Parameters for closing postings:
    Document Type                   UE
    Posting Date                       30.06.2013
    Document Date                   30.06.2013
    Posting Period                     14
    Parameters for opening postings:
    Document Type                   UE
    Posting Date                        01.07.2013
    Document Date                    01.07.2013
    Posting Period                     1
    Try with above inputs. I hope it will resolve your issue. I have resolved in the same way in our project for Turkey.
    Regards
    Anand

  • FI year End closing activities Sequence

    Hi Gurus
    we are running sap ecc6 , completed one 1.5 year , successfully closed pervious year FICO, Assets.  this time FI guy left . i have some knowledge of it.
    apart from small small fi year end closing\ precautionary  activites \ ( normally found 50 to 73 steps) . i want to confirm the activities sequence.
    for example :
    On  Day 1 of new fiscal year , we will have to post the document in new fiscal year , and in first period. means New fiscal , first period should be open. Also document number ranges should be open .
    then after reconciling \ completing previous year.   balannces should be carry forwarding to the next year.
    and then closing previous fiscal year . 
    1) Next financial year Period Opening  ( ob52)
    2) Asset accounting fiscal period. ( what should be the complete sequence regarding assets) 
    3) Copy Number ranges ( AP, AR, GL, etc)
    4) Carry forworward balances
    5) closing pervious year.
    thanks \ thomas

    Hi Thomas,
    Some of year end closing steps are mentioned below.
    1)Open and close posting periods in FIu2026.OB52
    2)Close MM periodu2026u2026u2026u2026..MMPV
    3) Collect and post all outstanding vendor Invoicesu2026u2026F-43
    4) Collect and post all customer Invoicesu2026u2026F-22
    5) Post accruals/deferrals u2026u2026FBS1
    6) Generate Recurring entriesu2026.F.14
    7) Run the interest calculationu2026..F.52
    8) Maintaining Exchange Rates u2026u2026 OB08
    9) Run the foreign currency valuationu2026.F.05
    10) Run depreciation runu2026u2026..AFAB
    11) GR/IR clearing account u2026.F.13
    12) Complete Bank Reconciliationu2026u2026u2026FF67
    Other few activities given below:
    FI
    1. Depreciation Run - AFAB
    2. F.5D Balance sheet adjustment calculation
    3. F.5E Balance sheet adjustment Post
    4. F.05 Foreigh Currency Valuation.
    CO
    1. CO43 Overhead calculation
    2. KKAO - WIP Calculation
    3. KKS1 - Variance Calculation
    4. CO88 u2013 Settlement.
    Might help you.
    Thanks and Regards,
    Arun Mulgund

  • Change fiscal year to 2006 in Asset Management : error in year-end closing

    SAP version: 4.0B
    Transaction Codes used: Year-end closing – AJAB, Fiscal year change – AJRW
    We are trying to change the fiscal year to 2006 in Asset Management.
    I tried to change the fiscal year to 2006 for the company code 0055 using transaction code AJRW. The test run has displayed an error message “Fiscal year change in co. code 0055 1 possible only after year-end closing 2004 2’.
    I have used the transaction code OAAQ to find the out the fiscal year, the closing for depreciation area is successfully performed.
    Unfortunately it is still showing ‘2003’ which should have been 2004 for company code 0055.
    I tried to close the fiscal year 2004. The test run has completed successfully. I have scheduled the ‘RAJABS00’. The program has executed successfully with no errors or warnings.
    The closing for depreciation area (Transaction – OAAQ) is still showing 2003 for company code 0055, which should have been changed to 2004.
    I am new to Asset Management. Can you please give some suggestions on how to fix the problem and change the fiscal year to 2006.
    Thank you,
    Vidya

    Hi,
    Thank you very much for your prompt reply.
    I have used transaction OAAR to check if any area is still open for previous years.
    Surprisingly! The areas are closed only till 2003.
    Can you please let me know what to do (transaction codes - programs) to close the areas for fiscal year 2004.
    I am new to Asset Management. I think you are good in Asset Management. Can you please give some suggestions on how to close the fiscal year 2004.
    Can you please let me know if I have to run any other transactions other than closing the areas before running the transaction to close the fiscal year 2004.
    Thank you very much.
    Sincerely,
    Vidya

  • AJAB year-end closing no data

    Hi,
    We are running transaction AJAB for year end closing of Asset Accounting. We are trying to close fiscal year 2010.
    In test run, it is showing no errors, but it is also not displaying any data. I expect it to show some information on the assets that will be affected, though no data is being shown.
    What could be the problem? I noticed that depreciation may need to be recalculated (AFAR). Could this affect year-end closing?
    Thanks,

    Hello,
    This transaction will not show you any data since it is only required for the technical purposes. While running t-code AJAB, is displaying "NO" under the "Other Error" column then it means you don't have any issues while doing the year end-Closing.
    Did you make any changes to any asset after completing your depreciation run for 12 month? If yes, then it is recommended that you do run transaction "AFAR" so the depreciation will be correcting for that asset before you actually do the year end closing for Fixed Asset.
    However, if you are sure that you have not made any changes to any of your assets then you don't have to recalculate the depreciation.
    Thanks

  • Error during Year-end closing Asset Accounting (AJAB)

    Hi,
    While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted".
    Processing the error message:
    While proceeding through the error message details I checked "Define How Dep Areas Post to GL" and found that 4 depreciation areas are maintained as under:
    Area/Description/ G/L/ Target Group
    01/ Book dep/1 (Area posts in Realtime)/0L (Leading Ledger)
    15/Income tax dep/0 (Area does not post)/ Blank
    21/ IFRS/ 3 (Area posts dep only)/1F (IFRS Ledger)
    Then I clicked on start APC program, which leads to transaction ASKB (Periodic Asset Posting). The transaction could not be posted as document type is not assigned for periodic posting of Asset Values in SPRO>Fin. Accounting (New)>Asset Accounting>Integration with GL Accounting>Post APC values periodically to GL Accounting>Specify document type for periodic posting of asset values.
    I've got 2 queries:
    1) whether year-end closing can be executed if the document type is assigned and transaction ASKB is run.
    2) If the answer to first query is yes, how come the same error did not encounter in other company codes (the error occurred only in 2 company codes). I've also checked the depreciation area maintained in asset masters of the company code where no such problem was encountered and found it to be same as the company code where the problem has occurred.
    Seek your expert advise to resolve the issue.
    Thanks,
    Vipin Patankar

    Hi Malhar,
    Thanks for your prompt reply. I understand that the issue can be resolved by assigning document type and execute ASKB. At present document type 'AF' is being used for depreciation posting, can we use the same document type for APC value posting or some other document type should be used.
    I still need some more highlight on the reason for not facing the problem in other company codes.
    Thanks,
    Vipin Patankar

  • Year End Closing through SCMA.

    Hi all,
    Need some advice on year end closing. I was wondering if there was a way to schedule OKP1 and OB52 automatically. I realize that variants cannot be setup for these transactions, unless i create ABAP programs for these transactions. Is there any other way to set up these transactions to execute without user intervention.
    Regards

    Yes - Program RFPERIOD_OPEN and RFPERIOD_CLOSE as needed  (Alt. OB52)
    Yes - Set Period Locks in Batch - Program RKCOOKP1 (Alt. OKP1)

  • Take back Year End Closing for Fixed Asset

    Dear all,
    Is it possible to reverse a year-end closing in Fixed Asset? If yes, how to do it and what are the consequences?
    Users need to carry out some corrections for the closed year!
    Thanks for your help.
    Nas.

    Hi.
    Thanks for answering. If I change it in trans. OAAQ manually, should I re-run depreciation run before running the closing transaction AJAB again?
    Thanks,
    Nas

  • Program RFSUMB00 for italy year end closing

    Hello All,
    I am setting up all the configurations for year end closing in Italy using program RFSUMB00. Here i need some clarification on the below points.
    1. dummy vendor / customer master needs to be created for each recon account. here i would like to know whtr we need to create a dummy recon account for dummy vendor / custome? if no, how would postings be happen.?
    2. we need b/s opening and closing accounts for this prog. I would like to know wht entries will happen at the year end and whtr all b/s closing postings will happen to same account?

    Hi,
    I hope dummy accounts are not required. Please try as below. For balance sheet closing and opening accounts you can use technical accounts which we use for initial balance uploading. This program will generate one closing entry and one opening entry with the help of technical account what I have mentioned so that the balances will become ZERO in previous FY.
    Closing entry happens in previous fiscal year and opening entry will posted in current FY.
    Please go for FAGL_IT_02 - Italy (New). Do not go for F_IT_01 - Italy. There are some prerequisites before executing this program.
    Please close normal periods of previous fiscal year and ensure that special periods of previous fiscal year are opened. Means special periods should be available for postings.
    Closing postings should happen in special periods. Try with 14th period.
    I suggest to run this program only in L1 ledger as this only legal requirement.
    Below is for your reference where July to June Fiscal year is maintained.
    P&L Account                              550016 (result of PNL account)
    Net Result Account                     101001 (Retained earning account)
    Balance Sheet Account- Closing  800005  (Technical account)
    Balance Sheet Account- Opening  800005 (Technical account)
    Parameters for closing postings:
    Document Type                   UE
    Posting Date                       30.06.2013
    Document Date                   30.06.2013
    Posting Period                     14
    Parameters for opening postings:
    Document Type                   UE
    Posting Date                        01.07.2013
    Document Date                    01.07.2013
    Posting Period                     1
    Try with above inputs. I hope it will resolve your issue. I have resolved in the same way in our project for Turkey.
    Regards
    Anand

Maybe you are looking for