Perl Module SNMP.pm do not work

Hello,
I want to use SNMP.pm Perl Module bundled with Solaris10,
but it doesn't work.
I guess the problem is that
default_store.so does not link sfw/lib/libnetsnmp.so with absolute path.
perl -MSNMP -n
Can't load '/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int/auto/NetSNMP/default_store/default_store.so' for module NetSNMP::default_store: ld.so.1: perl: fatal: libnetsnmp.so.5: open failed: No such file or directory at /usr/perl5/5.8.4/lib/sun4-solaris-64int/DynaLoader.pm line 230.
at /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int/SNMP.pm line 16
Compilation failed in require at /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int/SNMP.pm line 16.
BEGIN failed--compilation aborted at /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int/SNMP.pm line 16.
Compilation failed in require.
BEGIN failed--compilation aborted.
Thanks

Russell,
The warranty period on your mac is 1 year. The complimentry phone service period is 90 days unless you have a hardware problem. I'd say you likely have a hardware problem and will not be charged for the phone call.
I'd suggest 2 things:
1. Sign up for Applecare as has been recommended countless times.
2. Make the call to tech support and see what they say about your problem.
Good Luck,
John

Similar Messages

Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer.

Using a Windows 2012 RDS Environment, we have users connecting to a CPD website, and as part of the CPD they need to run a systems checker. When they run the systems checker they get the following error message: "Adobe Flash FAIL: Adobe Flash Player local storage settings incorrect. Module 'Resume' feature may not work on this computer". All users are connecting to this environment with Windows CE Clients,I have checked the setting on Adobe Flash and they seem correct but as each user has its own profile on the RDS session, is there something that I should be setting for each user. I have added the website to the trusted sites and it has made no difference. Any ideas

It sounds like what's happening is that Flash Player can't write or read from the local shared objects in the user's redirected home directory because we disallow traversing junctions in the broker process. This behavior was disabled to address a vulnerability identified in some of John Forshaw's research into the IE broker last year.
You can enable this behavior by adding the following setting to mms.cfg:
EnableInsecureJunctionBehavior=1
That said, you can probably gather from the name of the flag that we don't really recommend this approach, and disable this attack surface by default. There's some risk that a network attacker could craft content that abuses fundamental issues with how Windows handles Junctions to write to arbitrary locations.
Unfortunately, there's not a simple or easy workaround that I'm aware of (but it's been ages since I've administered a Windows domain) for this kind of NAS/SAN-backed terminal server environment where Flash is not able to access \Users\<user>\AppData\Roaming\Macromedia\Flash Player\ without traversing a junction.

When attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?

I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system...

The cisco snmp oids do not work, I can't get cpu or memory data.

Hello. I want to monitor the cpu and memory usages on my cisco devices using snmp. I found the snmp oids related to cpu in the following page :
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a94.shtml
I just copy the table here:
But the oids in the table do not work on my devices. For example, I have a cisco 3550 switch with the ip 192.168.1.211, version 12.2(25)when I want to get the informations about the oids up in the table, I got these results:
It shows that the oids cisco given up in the table are not existed in my 3550 switch's MIB. More weird is that when i add a number "1" to
the end of the oid cisco given, I can get some meaningless data for some unkonwn item names like "entreprises.x.x".
For most mib items, the snmp oids work well on my switch. For example, the following graph shows the interface out rate of the swtich:
I think the essence is when I executed the following command:
in all the output results, there's not any item relevant with "cpu" or "memory", but most other items are ok, such as interfaces, as shown below:
IF-MIB::ifDescr.47 = STRING: FastEthernet0/39
IF-MIB::ifDescr.48 = STRING: FastEthernet0/40
IF-MIB::ifDescr.49 = STRING: GigabitEthernet0/1
IF-MIB::ifDescr.50 = STRING: GigabitEthernet0/2
IF-MIB::ifDescr.51 = STRING: Null0
IF-MIB::ifDescr.52 = STRING: Vlan1
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.5 = INTEGER: ethernetCsmacd(6)
So why the cisco given oids won't work on my cisco switch, and how can I get the datas I want? Anyone has some advices? Thanks in advance!
In case the pictures I inserted missing, I attach my problem in the doc.

Have you looked at this previous discussion:
Can't Activate FaceTime

I adjusted the login module, but it does not work.

I Adjust the Login Module Stacks according to the
http://help.sap.com/saphelp_nw04/helpdata/en/aa/bf503e1dac5b46e10000000a114084/content.htm
I adjusted the Hello Application provided by the SAP J2EE Server, I remove all the login modules, I hope there is no login page displaying when I access to the Hello page again. But it does not work. The login page always appears.
Was I wrong to understand it?
Any reply is appreciated.

1. I finished configuration for Login module.
   2. And the document say, the last step is to make
sure the login modules take effort when the application
is accessed, using the Application Tracing Servie to
restart the affected application.
   But, I have not found the Application Tracing Service
to restart the affected application.
   I think it is why it does not work.
   Hope your your any recommendations and Points must be
rewarded.

Still trying to customize the layout of my e-commerse module, but it's not working for me

I have followed the links http://kb.worldsecuresystems.com/134/bc_1342.html#main_eCommerce
I am still unable to manipulate these tabs to modify the layout. Please help. I want to center justify my items and no luck no matter what I try. They are so right justified on a tablet they are not seen. I've gone back to default. No luck. I type in center in the tag, no luck, hit the center layout of the tage itself, nothing works.
I see this pre-set list of tags, but how do I modify them so I can get it placed well on page and change the number of items. I've read and re-read the pages sent to me previously. This does not explain it.
Thanks

This looks like an HTML error here. For some reason, on your site your product list appears inside the <div class="cart-summary"></div> element and that element is being styled to float to the right. That .cart-summary div should really just hold the text for what items are in your cart and the checkout link.
It's likely that someone didn't close a DIV element properly which is making your product lists appear inside that div.
I'm not sure how much customization you've done on your Shop pages but I can help you reset it. Basically, you need to restore your main shop layout to the original code and it should be ok.
Before you restore the original layout you should back up the code first so open up a text editor or something to paste your current code/layout, then, once that's open:
Login to your BC Admin portal
Goto Site Settings > Module Templates > Online Shop > Overall Layout
You should see some code there for your layout, select it all and copy and paste it into a text editor. Save that text file as a backup so you can paste it back into that layout if things go awry.
After you've saved your layout, on the bottom of that screen you should see a "Restore to default" button next to the save button. Click that and confirm you want to restore it by clicking OK.
Now your site should be using the original online shop layout and your HTML issue is likely fixed.

Develop module in Lightroom CC not working

I've just installed Lightroom CC& used it to create a panorama and a HDR, both of which were successful. I then tried to edit them in the Develop module but was rewarded with a blue screen where the image should be; I then found that this happened to all the images I tried to edit.
I then imported the panorama and HDR to Lightroom 5.7, and tried to edit them - successfully. So it works in Lightroom 5.7, but not in CC - does anybody know what's happening?

Hi there,
this solution worked for me with LTCC - win8/64bit
once turned off the graphics card acceleration in Preferences->performance
closd application
opened back application > solved!
thank you

SNMP v3 informs not working

Hello all,
I'm trying to set up snmp v3 to send informs (not traps) to a NMS in the local network. I've got the user, auth password, group, etc. set up, and I can query the switch from the NMS, but no informs would send even I've configured the switch to send vlan changes and general snmp (warm/cold start, link up/down, etc) to the NMS. I'm running into a deadend and was wondering if anyone can see if there's anything missing in this config:
Config parameters (used for testing only):
-auth no private
-NMS IP 10.0.0.21
-informs enabled (no traps)
-user = userv3
-group = groupv3
-auth = md5-encrypted "authkeyv3"
-read/write/notify viewname = viewv3
snmp-server user userv3 groupv3 v3 auth md5 authkeyv3
snmp-server group groupv3 v3 auth read viewv3 write viewv3 notify viewv3
snmp-server host 10.0.0.21 inform version 3 auth userv3 vlancreate vlandelete config snmp
1382 SNMP packets input
    0 Bad SNMP version errors
    13 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    1380 Number of requested variables
    0 Number of altered variables
    1363 Get-request PDUs
    0 Get-next PDUs
    0 Set-request PDUs
1378 SNMP packets output
    0 Too big errors (Maximum packet size 1500)
    0 No such name errors
    0 Bad values errors
    0 General errors
    1276 Response PDUs
    9 Trap PDUs
SNMP global trap: disabled
SNMP logging: enabled
    Logging to 10.0.0.21.162, 0/10, 0 sent, 0 dropped.
SNMP Manager-role output packets
    0 Get-request PDUs
    0 Get-next PDUs
    0 Get-bulk PDUs
    0 Set-request PDUs
    0 Inform-request PDUs
    0 Timeouts
    0 Drops
SNMP Manager-role input packets
    0 Inform request PDUs
    0 Trap PDUs
    0 Response PDUs
    0 Responses with errors
SNMP informs: enabled
    Informs in flight 0/25 (current/max)
    Logging to 10.0.0.21.162
        0 sent, 0 in-flight, 0 retries, 0 failed, 0 dropped
SNMP agent enabled
Would I need to configure the remote engineID for this to work?
Thanks,
-Will

That is correct. The switch will send the inform with the NMS's engineID. Therefore the switch needs to know the proper remote engineID. See http://www.cisco.com/en/US/docs/ios/12_0t/12_0t3/feature/guide/Snmp3.html#wp21645 and http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf014.html#wp1001347 .

CRL verification on Cert Auth Module .... not working?

Hi there
I've been trying to configure my Cert Auth module on AM7.1 to do CRL verification of the certificates being provided to authenticate. My question is : I don't think it is working and I can't find anywhere documentation on how to make it work. The only information I found online is : http://docs.sun.com/app/docs/doc/819-5209/gezzl?a=view .
Anyways, I'm using a verisign certificate to authenticate. With the CRL flag enabled on the module ( and the debuging flag on the AM config file to message ) I noticed that the module, tries to search my LDAP for the CRL information for the provider in question. So, following the previous document I found, I created an entry for that provider, I downloaded the CRL file from verisgn, created the proper file and syntax ( during these tries I got a couple of exceptions on the amSecutiry when the value returned from the LDAP was in a form that was not recognised as a CRL list ) and finaly got the CRL lsit converted properly, into the LDAP and the AM performs the LDAP search , on the LDAP log I see that the entry is returned to the AM .... and then it stops .
It doesn't show me an error like : user not allowed , nor an error like , the user doesn't have a profile in this organization , not anything, what it shows me is a login page for AM with only one button there saying "Log in" and no text boxes nor anything else.
Any thoughs on this ?
Thanks you all for your help
Rp.

did you turn full debugging on? What does the amAuth log say?

Photo gallery module manage items description not working

Hi. On this page I've got two photo galleries. For some reason the Description in the Manage Items tool only works some of the time. Seems to be quite random as to when it will/won't work. Is there a reason for this?
Waitakeres Ranges Maps

I'm having the same problem. Can you give me an idea of how this is possible using AJAX or point me at a tutorial?
for every iweb photos page iweb generates an rss.xml file with it, the captions are kept in the rss.xml .
so you can use ajax method to read the rss.xml and figure out what need to be manipulated.
there is no tutorial of any kind for iweb ajax widgets, I have not seen any one yet to crack an iweb widgets (this forum or elsewhere); so you are on your own.
that said you can hyperlink photos page captions and thumbnails with simple javascript (simple mapping lookup), but you still need to know javascript and iweb widgets.
here is my simple javascript sample: http://temp.cyclosaurus.com/NoThumbnails/Photos.html
thumbnails and captions are hyperlinked to apple, ggogle and yahoo.
code is linked to the sample, you'll have to adapt it to your own needs.

FlashBuilder 4.7 Flex Module "Output SWF" path not working.

I would like to use the Flex Module feature in FlashBuilder to easily compile some child SWF which are Modules. The problem is that the "Output SWF" path is not respected, when I compile FlashBuilder 4.7 aways compiles the file default path.
Cheers,
Hays

I forgot to attach my image.

EEM detector SNMP OID does not work

i want to use EEM to detector policy-map class traffic rate, if class traffic is more than a number, trigger syslog message.
below is my EEm script on ASR1002 ( asr1000rp1-adventerprisek9.02.04.02.122-33.XND2.bin)
event manager applet Rate-limit
event snmp oid ".1.3.6.1.4.1.9.9.166.1.15.1.1.10.50.196608" get-type exact entry-op gt entry-val "100" poll-interval 10
action 1.0 syslog msg "policy Rate-limit"
but i did not see anything showing on syslog. from debug, i got below error msg :
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_async
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_poll_timer: re=0x3D144824, timer_type=POLL
Jun 1 02:21:49.160 GMT: fh_fd_snmp_process_poll_timer: OID unavailable, value check skipped
Jun 1 02:21:49.160 GMT: fh_fd_snmp_start_poll_timer: start_t=10000
but i could get number from snmpwalk command :
xchen-mac:~ xchen$ snmpwalk -v 2c -c <string> -m ALL stde1002a .1.3.6.1.4.1.9.9.166.1.15.1.1.10.50.196608
SNMPv2-SMI::enterprises.9.9.166.1.15.1.1.10.50.196608 = Counter64: 112938
please help me where is wrong ?

Duplicate post.
Go here: https://supportforums.cisco.com/discussion/12219976/eem-detect-snmp-event-not-working

[solved] Blacklisting of modules in rc.conf not working

Hi folks,
the blacklisting of modules in rc.conf (putting an '!' in front of the modules name in the MODULES-array) seems to be broken. As I was a bit sloppy with my system I cannot pin down a certain date from which on this behaviour occured. It's happened in the last two weeks, and I assume, that it was caused by the update of rc.sysinit.
Here the importants part of rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq-ondemand !snd_seq_dummy !snd_seq_oss !snd_pcm_oss !8139cp !ipw2100 !yenta_socket !firewire_ohci)
and the output of lsmod right after I the login
[10:11 ~]$ lsmod
Module Size Used by
radeon 523682 2
ttm 31045 1 radeon
drm_kms_helper 21971 1 radeon
drm 126556 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 4219 1 radeon
snd_seq_dummy 1099 0
usbhid 33451 0
snd_intel8x0 21848 3
snd_seq_oss 25304 0
hid 61117 1 usbhid
snd_seq_midi_event 4452 1 snd_seq_oss
snd_intel8x0m 9195 1
snd_ac97_codec 85937 2 snd_intel8x0,snd_intel8x0m
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
ipw2100 62412 0
ac97_bus 750 1 snd_ac97_codec
joydev 7768 0
8139too 17116 0
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
libipw 22851 1 ipw2100
snd_pcm 57479 5 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
yenta_socket 19039 0
iTCO_wdt 7577 0
snd_timer 16117 3 snd_seq,snd_pcm
uhci_hcd 19124 0
8139cp 15404 0
i2c_i801 7122 0
rfkill 12320 0
lib80211 3210 1 libipw
snd 43847 16 snd_intel8x0,snd_seq_oss,snd_intel8x0m,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
ehci_hcd 31594 0
iTCO_vendor_support 1453 1 iTCO_wdt
rsrc_nonstatic 8891 1 yenta_socket
mii 3218 2 8139too,8139cp
firewire_ohci 20266 0
sr_mod 13161 0
pcmcia_core 25643 2 yenta_socket,rsrc_nonstatic
intel_agp 23225 1
firewire_core 37529 1 firewire_ohci
crc_itu_t 1041 1 firewire_core
pcspkr 1347 0
psmouse 56309 0
agpgart 23331 3 ttm,drm,intel_agp
container 1869 0
soundcore 5007 1 snd
led_class 1933 0
shpchp 26592 0
usbcore 118921 4 usbhid,uhci_hcd,ehci_hcd
battery 7328 0
i2c_core 15369 4 radeon,drm,i2c_algo_bit,i2c_i801
sg 21079 0
ac 2255 0
pci_hotplug 23492 1 shpchp
snd_page_alloc 5809 3 snd_intel8x0,snd_intel8x0m,snd_pcm
wmi 4083 0
cdrom 31625 1 sr_mod
serio_raw 3620 0
thermal 9326 0
evdev 6970 10
button 3638 0
cpufreq_ondemand 6897 1
acpi_cpufreq 5599 0
freq_table 1955 2 cpufreq_ondemand,acpi_cpufreq
processor 25790 2 acpi_cpufreq
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
sd_mod 24101 3
ata_piix 17725 2
libata 135578 1 ata_piix
scsi_mod 78933 4 sr_mod,sg,sd_mod,libata
jfs 163812 2
If more details are needed I can provide them.
Any hints or help are appreciated
Regards
Last edited by mbender (2010-03-02 13:51:35)

I had some time to do a deeper research. I tinkered around in rc.sysinit and added calls to lsmod at different postitions. With this approach I reached following conclusion:
The code in lines 78 to 84 in rc.sysinit loads nearly all the modules for my system (rtc-Modules are loaded before, modules for hdd-access come from the init-ramdisk, cpufreq-modules are not loaded). This includes modules blacklisted in rc.conf but not those modules blacklisted in /etc/modprobe.d/*.
Without further research I would assume that udev doesn't care for the MODULES-Array in the rc.conf. So one should 'fix' udev or remove the blacklisting from rc.conf completly and leave blacklisting to /etc/modprobe.d/*.
I'm still curious if some special circumstances on my system lead to this behaviour or if the other users just don't use the blacklisting in rc.conf respectivly use it combined with blacklisting in /etc/modpobe.d/*.
I'm keeping my /etc/ in a git-repository and checkout the files I tinkered with after I'm finished. Therefore I guess that the chances of some modified configuration files are quite small. Anyway I'll check files if I get hints.
To avoid confusion and clearify my findings I post the 'culprit'
# Trigger udev uevents
if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
stat_busy "Triggering UDev uevents"
/sbin/udevadm control --property=STARTUP=1
/sbin/udevadm trigger
stat_done
fi
I'm still offering cooperation for dealing with this issue.
If this is no issue at all, I would be very happy if someone could (try to) explain this behaviour on my system (Yes, I like to solve riddles a lot...).
Best regards
edit: Typos
Last edited by mbender (2010-02-26 10:36:02)

Could not load the mmxcore routines module because it does not work with this version of photoshop?

I'm getting the above message when starting Photoshop CC 2014. Click OK & it loads fine but just a little annoying. Seems to have happened since the Aug 5 update. Photoshop shows as version 14.0.0 release although CC App shows it as up to date. Should it not be version 14.1 ?

According to Adobe - see here: Adobe Photoshop CC new features | Buy Photoshop CC 'Photoshop CC 14.2' was released on Jan 15th 2014 but the latest version released on 5 August 2014 is 'Photoshop CC (2014.1)'
As far as I'm aware, after 14.2 , releases were name '2014 release' so the 2014.1 release is indeed the latest version - there have been two updates since 14.2.1
However, this still doesn't explain why mine has shows as 14.0.0 and 'up to date' Anyone know how I can get it to update to the latest version??

Module with cpvc slides not working after uploading to LMS

Everything works fine when previewing, but when it's uploaded to our LMS, it fails to load the video but continues to show the objects (shapes, text boxes) in that video slide.

Did you also upload the js file to the directory indicated in the html code...
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
I don't see that file if I try to link to it, but that your swf is showing at all without that file is a bit of a wondering.

Perl Module SNMP.pm do not work

Similar Messages

Maybe you are looking for