Permission error while addProcessTaskInstance of tcProvisioningOperationsIn

Hi All,
I am getting No Permission error while performing addProcessTaskInstance of tcProvisioningOperationsIntf. I am running this against process definition of Xellerate User. I have created a task in Xellerate User process definition and then trying to add this to user's process definition.
There are two scenario -
1) The call to addProcessTaskInstance is done by a user that belong to SYSTEM ADMINISTRATOR group. It works fine. There is no error.
2) The call to addProcessTaskInstance is done by a user that does not belong to SYSTEM ADMINISTRATOR group. Here I am getting the following error:
Caused by: Thor.API.Exceptions.tcAPIException: The logged in user does not have permissions to perform this operation
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.addProcessTaskInstance(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.addProcessTaskInstance(Unknown Source)
The handle to tcProvisioningOperationsIntf is created by using the respective user credentials.
Can somebody suggest ways of how to fix this?
TIA
Prakash
Edited by: Prakash.Gupta on May 7, 2012 1:25 PM

use private key
ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
tcSignatureMessage moSignature = tcCryptoUtil.sign("xelsysadm","PrivateKey");
tcUtilityFactory ioUtilityFactory = new tcUtilityFactory(env,moSignature);
Regards
Suren

Similar Messages

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

File permission error while using vista

HI
In using vista .I am getting file permission error in create text file.wats the reason?
kavi

Hi,
When you post a question, it would help readers answer your questions if you mentioned the LabVIEW Version you are using, a screenshot of the error and possibly the VI that makes this error occur.
Thanks,
CLA | LabVIEW 7.1... 2013
www.renishaw.com

Getting a permission error while updating a field.

hi,
I want to update a field in OIM and push the same to OID. When i try to update it for like 20 times it woks for 18 times and doesnt work for couple of times. I check the log and i get the below error.....
*Caused by: javax.ejb.AccessLocalException: [EJB:010160]Security Violation: User: 'xelsysadm' has insufficient permission to a*
ccess EJB: type=<ejb>, application=Xellerate, module=xlDataObjectBeans.jar, ejb=tcLookupOperations, method=create, methodInte
rface=LocalHome, signature={}.
at weblogic.ejb.container.internal.MethodDescriptor.checkMethodPermissionsLocal(MethodDescriptor.java:573)
at weblogic.ejb.container.internal.StatelessEJBLocalHome.create(StatelessEJBLocalHome.java:60)
at com.thortech.xl.ejb.beans.tcLookupOperations_u50o5o_LocalHomeImpl.create(tcLookupOperations_u50o5o_LocalHomeImpl.j
ava:70)
Kindly help me to fix this.
Thanks
thilak

http://bbs.archlinux.org/viewtopic.php?id=83076

Service accounts for the Workspace Database service permission Error while creating Tabular Mode from PowerPivot

Hi All,
Please help me out against this issue. I have spent so much (3 working days) time just figuring out what is the issue and its solution.
I am learning Tabular Mode and trying to create a mode based on PowerPivot model. I am getting following error message:
'The PowerPivot workbook could not be imported. The service account for the workspace database server does not have permission to read from the PowerPivot workbook.'
Here is my infrastructure:
1. SSAS in Tabular Mode is installed on my Windows 8 Laptop
2. PowerPivot is also in my laptop
3. There is only my account (as Admin of course) for SSAS
Here are my questions:
1. What is this error and how can I cope with that? A step by step explanation would be highly appreciated :-)
2. Do I need to change something in Windows settings or in SSAS?
3. I am confused about my workspace database server as well, Do I have to install SSAS twice; one for development and one for workspace?
Looking forward for the expert advise.
Tahir
Thanks, TA

Hi,
I suspect you might have more luck if you try the SSAS forum: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices
Regards
Jamie
ObjectStorageHelper<T> – A WinRT utility for Windows 8 |
http://sqlblog.com/blogs/jamie_thomson/ |
@jamiet |
About me

Error while consolidating (The operation couldn't be completed. Permission denied)

I have just bought a new MacBook and that has given me extra harddrive space, and now I am trying to consolidate some masters in Aperture, that I have on my Time Capsule. But I get this error:
Error while consolidating (The operation couldn’t be completed. Permission denied)
I can access my Time Capsule in Finder perfectly well. Can anyone help?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

Permission denied error while checking in

I am working on webdynpro DC. While i try to checkin the DC, the following permission denied errror pops up. I have seen a blog with similar problem, but no answer. Will someone from SAP help solve this issue?
The related link with similar problem is
Permission denied error while CBS is building DCs
My Log is as follows:
Build number assigned: 7900
Change request state from QUEUED to PROCESSING
ACTIVATION request in Build Space "D30_ESSJAVA_D" at Node ID: 7,433,150
 [id: 7,756; parentID: 0; type: 4]
 [options: IGNORE COMPONENT INTERSECTION]
REQUEST PROCESSING started at 2007-05-22 15:55:22.138 GMT
===== Pre-Processing =====
Waiting 5 ms
List of activities to be activated:
 1 activity in compartment "com.swiss_XSSswiss_1"
 Model_KA_22022007_1735
 [seq. no 1129][created by INDIA at 2007-05-22 17:55:14.0][ID 4db56227087911dcb96f0013217ca473]
Analyse activities... started at 2007-05-22 15:55:22.155 GMT
Analyse dependencies to predecessor activities... finished at 2007-05-22 15:55:23.704 GMT and took 1 s 400 ms
 SKIP : Development Component "com.swiss/xss/glbmr"
 1 component to be build in compartment "com.swiss_XSSswiss_1"
Analyse activities... finished at 2007-05-22 15:55:23.777 GMT and took 1 s 622 ms
Change request state from PROCESSING to PROCESSING
Calculate all combinations of components and variants to be built...
 "com.swiss/xss/glbmr" variant "default"
Prepare build environment in the file system... started at 2007-05-22 15:55:23.876 GMT
 Synchronize development configuration... finished at 2007-05-22 15:55:23.877 GMT and took 0 ms
 Synchronize component definitions... finished at 2007-05-22 15:55:23.892 GMT and took 14 ms
 Synchronize sources...
17:55:36.481 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure (Permission denied (errno:13))) Bapiqualif.dtstructure (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Bapiqualif.dtstructure)
17:55:36.702 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf (Permission denied (errno:13))) Plstx.dtsimpletype.xlf (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Plstx.dtsimpletype.xlf)
17:55:36.714 SYNC (FAILED: Failed to create/open file: /usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype (Permission denied (errno:13))) Syuname.dtsimpletype (/usr/sap/trans_D30/CBS/65/.CACHE/437/DCs/com.swiss/xss/glbmr/_comp/src/packages/com/swiss/glbmr/trainmodel/types/Syuname.dtsimpletype)

Hi Sandeep,
looks like your CBS has no permission in the filesystem where it tries to build your DC.
The prefix "/usr/sap/trans_D30/CBS" looks a bit suspicious to me. Is it really intentional that CBS should work in some (probably publicly visible) transport directory?
Regards,
Marc

Error while creating a new Domain in BEA Weblogic

I am getting the below mentioned error while creating a new Domain in BEA Weblogic
Preparing...
Extracting Domain Contents...
Creating Domain Security Information...
Saving the Domain Information...
Storing Domain Information...
String Substituting Domain Files...
Performing OS Specific Tasks...
Performing Post Domain Creation Tasks...
Domain Creation Failed!
Domain Location: C:\bea\user_projects\domains\base_domain_1
Reason: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
Exception:
java.lang.Exception: Got error in writing the node manager C:\bea\wlserver_10.0\common\nodemanager\nodemanager.domains property file!
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:138)
     at com.bea.plateng.domain.DomainNodeManagerHelper.registerDomainToNodeManager(DomainNodeManagerHelper.java:170)
     at com.bea.plateng.domain.DomainGenerator.generate(DomainGenerator.java:435)
     at com.bea.plateng.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:232)

Hi,
It look two ways either you dont have permission to write any new thing to that domain.properties file or might file is got corrupted.
Please check for the permission to that file.
Regards,
Kal.

Error while creating class

Error while creating class java/util/LinkedHashMap$EntryIterator
ORA-29545: badly formed class: User has attempted to load a class (java.util
.LinkedHashMap$EntryIterator) into a restricted package. Permission can be grant
ed using dbms_java.grant_permission(<user>, LoadClassInPackage...
-----Any Suggestion?
regards,
Anjan

Anjan,
Pardon me for stating the obvious, but did you do what the error message suggested? In other words, did you grant the required permission?
Good Luck,
Avi.

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

Error while loading shared libraries

error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosius

yap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius

Error while crawling LOB contents SharePoint 2013

Error while crawling LOB contents SharePoint 2013
I have Configured the BDC Service application using SQL external content. The connection was successful and I am able to see the external content in the List "BDC Demo" . But when I search in the BDC Demo site it gives nothing.
So I checked in the crawl logs and identified that it shows " 1 " under error. to further drill down the issue , I went to click on "1" and see the error message : Error while crawling LOB contents SharePoint 2013 .
I have created an external DB named BCSDemo_DB for which I have granted my search Service account read& write permission.
I have added the same account under administrators for both secure store and BCS service applications.
I have done index reset , done a full crawl but the error still occurs.
Can someone please advise if I am missing something.
Regards

Hi Aravinda,
According to your description, my understanding is that you got an error when you crawled SQL database table in SharePoint 2013.
This error is caused by the fact that the default content access account does not have any rights to access the metadata store in the Business Data Connectivity Service Application.
Or it is caused by the default content access account has no rights on the SQL database.
For fixing it, you need to grant the default content access account permission on metadata store in the Business Data Connectivity Service Application and the SQL database. You can refer to the link below:
http://www.sharepointinspiration.com/Lists/Posts/Post.aspx?ID=5
After that, do a full crawl for the content source.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error while Assigning database level role (db_datareader) to SQL login (Domain Account)

Team,
I got an error while creating a User for Domain Account. Below is the screen shot of the error (error : 15401)
Database instance is on SQL 2000 SP3. ( I know it is out of support, But the customer is relutanct to upgrade)
On Google search, i found below article which is best matching for this error
http://support.microsoft.com/kb/324321
I have follows each step of troubleshooting. But still the issue persists.
Step 1. The login does not exist == The login is very much exist in the domain as i am able to add the same domain id to other database instances
Step 2. Duplicate security identifiers == i have used this query to find duplicate SID
/* SELECT name FROM syslogins WHERE sid = SUSER_SID ('YourDomain\YourLogin') */
But there was only one row returned with create date of today's.
Error while Assigning database level role (db_datareader) to SQL login (Domain Account)
Step 3. Authentication failure == Domain is available. User is able to login on other servers via RDP connection.
Step 4. Case sensitivity == Database collation is set to Case insensitivity. (CI)
Other two 5. Local Accounts & 6. Name resolution == is not applicable to me.
I tried other ways also.
A. Creating login and providing permission in one go only = User account is not created
B. Instead of GUI, use query to create login and provide required permission = Same error.
Does anybody has faced any such situation
Chetan

See the below output
srvid
sid
xstatus
xdate1
xdate2
name
password
dbid
language
isrpcinmap
ishqoutmap
selfoutmap
NULL
0x010500000000000515000000A1F66E1BFC1DC75D26E72530A2B80400
14
20:25.9
57:33.4
UKBAA\LHRAPPMuttavarapuS
NULL
1
us_english
0
0
0
Chetan

Error while executing procedure

Hi,
I am executing a procedure, which will write a query result into a spreadsheet and it will store it into the local PC. i am trying to run this procedure using TEST username.
Now i created a utl_file directory like below:
create directory MYDIR5 AS 'c:\raj';
and i tried to assign permission like below :
grant read,write on directory MYDIR5 to TEST
i got the below error, while i am executing the GRANT stmt:
ORA-01749: you may not GRANT/REVOKE privileges to/from yourself
So who has to grant privileges for this. I tried to execute the procedure without granting privileges but it end up with ORA-29283: error.
So pls help me on this issue.
Thanks in advance!!!

You looked up the CREATE DIRECTORY statement right? What does it say under "Prerequisites"?
> I am executing a procedure, which will write a query result into a spreadsheet and it will store it into the local PC
Is the database also on your local PC? UTL_FILE runs on the database server.

Error While Deploying .sda File in SDM

Hi,
We have developed some GP Applications. To transport the GP Application to production system we have builded .sda file from the development portal and deployed it in SDM. But its throwing an error while deploying.
Production system details:
OS : AIX (ppc64) 5.3
EP : NW2004s SP 9
Oracle : 10.2
We tried giving R/W permission to the .sda files after copying it in production. But still it throws the same error.
The error we got while deploying in SDM is :
Deployment started Wed Mar 21 20:44:49 GMT+05:30 2007
===========================================================================
Starting Deployment of
com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782
Aborted: development
component 'com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782'/'sap.com'/'LOCAL'/'20070321165517'/'1':Caught exception during
application deployment from SAP J2EE Engine's deploy
service:java.rmi.RemoteException: Cannot deploy application
sap.com/comsapcafeugpfndtsp~contentD86B5900D79E11DBB0E4000D60ECF782.. Reason: <--Localization failed:
ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle',
ID='/usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.)', Arguments: []--> : Can't find resource for
bundle java.util.PropertyResourceBundle,
key /usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.); nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: <-
-Localization failed:
ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle',
ID='/usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.)', Arguments: []--> : Can't find resource for
bundle java.util.PropertyResourceBundle,
key /usr/sap/PEP/JC02/j2ee/cluster/server0/./temp/cafeugp~model/trareader1174490093196/xlfWork/caf.eu.gp.devobj/1B319881BE5E11DBBC21000D60ECF782/1B319881BE5E11DBBC21000D60ECF782.xlf (A file or directory in the
path name does not exist.) (message ID:
com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment of
com/sap/caf/eu/gp/fnd/tsp/contentD86B5900D79E11DBB0E4000D60ECF782
finished with Error (Duration 8944 ms)
Please guide me on how to solve this error.
Kind Regards,
Nirmal

Hi Dipankar,
I can't tell you the cause why you are facing this problem.
But I can suggest you a way that you can once again check the availability of plugins in your NWDS.
Contents of "gp_TopLevelDCs.zip" are
1) sap.com caf eu gp api wd.dcref
2) sap.com caf eu gp api.dcref
And
Location to Extract gp_TopLevelDcs.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\SCs\sap.com\CAF\_comp\TopLevelDCs
Contents of "gp_api_nw04s.zip" are-->
1) api(folder)
Location to Extract gp_api_nw04s.zip=>
C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.tc.ap_2.0.0\comp\CAF\DCs\sap.com\caf\eu\gp
I'm using NWDS 7.0.06
Just check if this info can help you out.
Do make a reply if you stiil face the problem.
Regards,
Piyush

Permission error while addProcessTaskInstance of tcProvisioningOperationsIn

Similar Messages

Maybe you are looking for