Permissions on a Subj Area - from RPD Vs from Presentation Services

Hi All,
I have a subject area who is accessible to a group A as mentioned in the RPD from permissions tab
The same subject area is assigned to "Everyone" in the Presentation Services [Admin -> Manage Privileges]
In such a case would a user outside the group A see it in his Answers?
I see so many subj areas available for "Everyone" in our Presentation Services. But when I login, I see few of them available for me and others not. This is when I do not have privileges to see any of them
Thanks & Regards
Monika

Thanks MK for looking into my query.
My set up is -
At RPD Level - Access to GroupA.
Denied to Everyone
At Presentation Services Level - Access to Everyone
So, should a user outside GroupA see the subj area or not?

Similar Messages

  • How to delete the cache from Presentation Services(Web UI)

    Hi,
    How to delete the cache from Presentation Services(Web UI) and from rpd also.

    Hi,
    For Presentation services cache refer : http://gerardnico.com/wiki/dat/obiee/presentation_service_cache
    For RPD Cache :
    Admin tool(rpd) > Manage > Cache > Action > Purge
    or check following links
    http://gerardnico.com/wiki/dat/obiee/event_table
    http://oraclebi.blog.com/automating-cache-purging-without-using-obiee-scheduler/
    cheers
    Aravind

  • Charts are not working in Multiple Presentation Services environment.

    Hi ,
    I have implemented multiple presentation services enviornment bu follwoing this blog: http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-2-presentation-services/. It was successfully implemented but charts are not working for any of the Presentation instyance.
    Kindly help us in providing the solution for this issue.
    Thanks,
    Jaishree

    thats true , but to how enable the Java host services as its not getting started from the Service Panel>Oracle Java Host Services.

  • RPD's and Presentation services

    Hi,
    i am new in OBIEE, and i have a doubt, how many repositories can be loaded on BI Server?? And presentations services??
    Regards.

    787061 wrote:
    Thanks again,
    last question, what is the meaning of DEFAULT in line
    Star = MiFID.rpd, DEFAULT;???
    Thanks in advance.Its the one that will be loaded when you connect via ODBC and dont specify an RPD (e.g with Admin tool against a BI server type ODBC source where you have not specified the RPD to load within the connection)

  • How to create new catalog in OBIEE from presentation service

    Regards
    Frnds

    Hi,
    (1) Create a new directory on your file system where you want the catalog to be stored
    eg: d:\work\catalog\MyNewCatalog
    (2) Open Presentation Services config file, instanceconfig.xml, in a text editor:
    d:\OracleBIData\web\config\instanceconfig.xml
    (3) Set the catalog to your new, empty catalog
    <CatalogPath>d:\work\catalog\MyNewCatalog</CatalogPath>
    (4) Restart presentation server
    Control Panel->Services->Oracle BI Presentation Server (restart)

  • The permissions granted to user '' are insufficient for performing this operation. (rsAccessDenied)

    when I try to connect to the "http://localhost:8080/ReportServer " I get this error.
    The permissions granted to user 'DOMAIN/USERNAME' are insufficient for performing this operation. (rsAccessDenied).
    I have configered the Reporting services Configuration manager.
    I am an administrator on my machine and on the reportserver DB. when I try to log on the my 2008 R2 reporting services I get a simalar error.
    does any one have an idea of what I am missing?
    thank you.
    Jeff
    Jeff

    Hi There
    Please also have a look on this thread
    http://tanveeronline.blogspot.co.nz/2011/07/ssrs-2008-r2-unable-to-connect-to.html
    http://social.msdn.microsoft.com/Forums/hu-HU/sqlreportingservices/thread/f8a0a3f5-3985-4356-8404-3b408f790747
    http://www.networksteve.com/enterprise/topic.php?TopicId=24217
    In the last section of this thread it get resolved by
    "Changing the ports. Configured TCP port to 9000 and SSL port to 9001.
    And then
    <Add Key="SecureConnectionLevel" Value="0"/>
    Its value was 2, changed it to 0."
    Please have alook on this thread that might help you
    Many thanks
    Syed
    http://tanveeronline.blogspot.co.nz/2011/07/ssrs-2008-r2-unable-to-connect-to.html
    Does not work. I already had the settings which are mentioned in that blog - 
    Try doing the following things
    Go to Reporting Services Conf. Manager.
    1. Change the server account to local account.
    2. Remove the SSL if configured.
    3. Go to C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
    4. Change the  SecureConnectionLevel value to 0 in rsreportserver.config
    Try refreshing the page, it should work now!
    Also tried answer at - http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f8a0a3f5-3985-4356-8404-3b408f790747/ssrs-2008-unable-to-connect-to-remote-server?forum=sqlreportingservices
    Same thing there. SecureConnectionLevel value to 0 is already set for me.
    Third link comment at end says  - 
    Hi Chaitanya, Changing the ports worked for me. Configured TCP port to 9000 and SSL port to 9001. And then <Add Key="SecureConnectionLevel"
    Value="0"/> Its value was 2, changed it to 0. Thanks for all your support Best Regards, Arka Mitra.
    You can set TCP and SSL like this from Reporting services config manager - 
    Web Service URL option (left pane) > Advanced settings button > put the values.
    The TCP can be changged to 9000, but the SSL requires a certificate file. I am stuck here.
    The clue to make your own SSL certificate is here - 
    http://johnhennesey.blogspot.com/2010/10/reporting-services-2008-over-ssl.html
    But, this post is not for windows 7 64 bit, ie my personal pc os. I tried to make the cert on win, 7, but options are complicated. Lets see.
    Here is the issue for the same - https://stackoverflow.com/questions/22314341/cannot-see-self-created-certificate-in-certmanager

  • Importing subject area from A to B

    I have a question on how to import a Subject Area from one datasource to other? Is the first step to go to that particular datasource and save it on local machine, make necessary changes and save the rpd in the other required location? Will this be sufficient to finish the import Subject Area project? Any help on this is appreciated.

    Consider Materialized VIews (also known as Snapshots). Materialized Views are refreshed
    on a periodic(scheduled) basis or can be refreshed on-demand. Here is a
    pointer to thedocumentation on Materialized Views.

  • "No certificate templates could be found. You do not have permissions to request a certificate from this CA..

    or an error occurred while accessing Active Directory."
    When I set up the subordinate CA where I am seeing this error message (when attempting to make a request via the web interface for a Linux client - Group Policy not possible here) I opted to not "Load Default Templates".
    Just FYI, PKI View shows "OK" for everything.
    Permissions on the template are Read and Enroll for Authenticated Users.
    Issuance Requirements are "CA certificate manager approval" (checked) - nothing else checked. "Same criteria for enrollment".
    Have I googled?
    That's just the problem. I've seen plenty of hits where people say "I've solved it this way and I've solved it that way".
    What is the (MS) recommended method to solve this problem?
    I'm concerned some solutions might be the equivalent of disabling CRL checks to resolve CRL problems - something where the solution is worse than the problem.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

    OK. This is the problem. When I duplicated the web server template, I had the choice of Windows Server 2003 or 2008 (Enterprise).
    I selected 2008 (OK, in the screenshot 2003 is selected - by default).
    Windows 2008 based templates (v3) do not work with web enrollment.
    https://technet.microsoft.com/en-us/library/cc732517(WS.10).aspx
    Absolutely none of the other solutions will help if you make this choice:
    - no adjustments of IE settings will help (if you thought it was "something" with your browser.
    - It does not matter if the Windows Authentication provider is set to NTLM or Negotiate first.
    - Application Pool identity can be ApplicationPoolIdentity or Network service.
    - You can enable or disable Anonymous Authentication.
    If you decide to select a v3 template, forget about using web enrollment.
    You will spend hours t-shooting.
    It will not work.
    IMPORTANT EDIT
    Having tried this on a second CA, it seems that you might have to change the NTLM and App Pool settings.
    I simply duplicated a template (2003) and thought I was all set.
    Not at all.
    I had to play with the Provider priority (put NTLM above negotiate) and use "Network Service" for the Default App Pool identity.
    Then it finally worked.
    Yes, an iisreset /noforce after each change.
    I'm not sure why this is so complicated.
    Maybe someone from Microsoft could explain what is going on here.
    This is documented nowhere. You have to proceed by trial and error until you get the right combination.
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account, and the other is my own. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased.

    I have an iPhone 4, My itunes are from two differnt accounts; one from when I was under my dads account when i was younger, and the other is my own which i currently use. My question is would I be able to sync and update my itunes on my MacBook without having all the new music erased. I have the icloud on my phone, but I just want to update my music on my laptop. Just nervous to, because it has happened to me before on a desktop computer  and it *****. Please help! Thanks.

    nevermind, i figuered it out

  • I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

    I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

    What fixed it for me:
    On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
    Uncheck "Sync Music"
    Click "Sync" button (bottom right)
    Let it run and finish
    Uncheck the box for every song, playlist, etc.
    Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
    Let it run and finish
    Check the boxes for the music you want on your iPhone
    Click "Sync" button (bottom right)
    Let it run and finish
    See if that doesn't work for you.  I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.

  • How to remove business area from the Hyperion report

    Hi All,
    Kindly tell me the steps required to remove the business area from the Hyperion report.
    Regards,
    Ajay

    s

  • Removing the business area from the WBS element

    Hi Experts,
    I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
    Now I want to remove the business area from WBS element.
    Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
    Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
    But still Business area field is grayed out for that WBS element.
    Could you please let me know how to remove the business area in this case ???
    Regards,
    Pradip

    Hi,
    Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
    Create new wbse with correct BA & then create pr & po.
    Regards,
    Sandeep

  • HT201543 how do i get my old itune library onto my new laptop, my old laptop is broken but all media is on my phone. Most of the songs are from CD's which i no longer have. HELP!

    How do I get my old iTunes library onto my new laptop? My old laptop is broken but all media is on my phone. Most of the songs are from CD's which I no longer have. HELP!

    That is not necessarily true. You are allowed to make a back-up of media you own and, at least in the Netherlands, even a copy of a work you've borrowed from a library. The law expressly permits this and you pay a certain amount for recordable media to allow for home use.  See http://www.thuiskopie.nl/nl for this.  If you then decide to destroy the media, i.e. do not transfer the media to someone else, I don't see how you infringe copyright by keeping the back-up. But I guess some so-called creatives like the idea of making money in all kinds of hypothetical ways...
    It is a nice dream, where you have to work once and then earn a lot of money by selling millions of copies from your work. But buyers can make copies too!! Hahahahahaha!

  • Can't see who emails are from in BT Yahoo Mail Inb...

    I am having a problem in that the "FROM" column in my Inbox (and all the other email folders) has recently started showing as blank for all my emails. However on my BT Yahoo Homepage the Yahoo Mail Preview box does still show who the emails are from.
    I suspect that this is a problem with my computer rather than with BT Yahoo Mail but does anyone know how to fix it ?
    Thanks
    cameronz

    cameronz wrote:
    I am having a problem in that the "FROM" column in my Inbox (and all the other email folders) has recently started showing as blank for all my emails. However on my BT Yahoo Homepage the Yahoo Mail Preview box does still show who the emails are from.
    I suspect that this is a problem with my computer rather than with BT Yahoo Mail but does anyone know how to fix it ?
    Thanks
    cameronz
    Hi. Welcome to the forums.
    What browser are you using ? I personally use Firefox, Opera, Chrome or Safari with IE9 very infrequently. Maybe give a different a try to see what happens,.
    As you indicated, it does seem to be a browser issue, maybe due to a security product update - what are you using for anti-virus or security product ?
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • How to hide or remove several areas from a clip and create a generator

    Hello dear comnunity,
    I'm in an urgent need an assistance:
    I need to proeuce a video of a screen recoding.
    I'm using Camtasia in order to record. The meterial is pretty static.
    The problem:
    I have a lot of information on the screen while I'm recoding which I'd like to remove in post.
    Basically what you see is a poker table. Each circle represents a player.
    What I need is to be able to "remove" all these colorful numbers in order to provide with a "cleaner" look.
    I understand that this can be accomplished by "layers" i.e.
    Use this as a "background":
    and then remove all of the areas with the colorful numbers.
    In short:
    I'd like to remove multiple areas from a single clip without having "holes".
    Note:
    Since I producing multiple vidoes I would like to be able to have some sort of effect\preset\generator etc in order to automate the process every time.
    I have FCP X as well as Motion 5.
    I saw some split screen generators with multiple areas. It looks like what I need but I do need to make my own custom splits.
    PLEASE try to provide with detailed information as much as possible. I'm not a noobie but not an expect as well.
    Thanks in advance, I really really appreciate your assistance.

    By default, the toolbar cannot be hidden.
    However, you can add button items to the toolbar, hook up to the event handlers, and create new menus and menu-items in your gadgets.
    What version of Smart Space are you using? The SDK is slightly different between 9.3.1 and 11.1.x
    There are ways to work around the toolbar and do some other slick UI renderings in regards to these topics.
    Please drop me an email and we can have a phone conversation around what you are trying to do. I may be able to provide some ideas for you.
    Thanks,
    Rob Hull
    Oracle Smart Space
    Development Manager
    [email protected]

Maybe you are looking for