Permissions Screen Stuck in Middle of Video

Using Internet explorer on Windows System 7 with Adobe Flash 15.0.0.189
The player will start. I can see the video - I can hear the sound - but - this little screen about adobe flash Player Settings is stuck in the middle of the screen. There is no effect when I click on "Allow" or "Deny".
Essentially flash works but I want to get rid of this permissions screen that is smack dab in the middle!
I can right click on this annoying screen and get some information (that I cant screen capture but allows me to click on "Settings"
and the screen in the middle of the video changes to the following:
But - once again I can not click on any of its options.
OR - The information that comes up when I right click gives me the option to click on "Global Settings"
Which brings up this screen:
I click on Allow and the following comes up:
I've played with some of the settings in this but don't understand them and am reluctant to change anything - afraid to cause more problems.
Can you help resolve this issue?
Thanks

Randomly, out of the blue there is the volume button stuck in the middle of the screen. However when i gently tap the phone on my hand, or push the button up or down, it disappears for a bit. but once the phone is locked, and unlocked again it comes up? Also, now when i'm on the phone i can hear this crackly sound in the background. Nothing has changed to my phone whatsoever. I tried the tips that you gave above, and still nothing has changed? the volume symbol still appears when it feels like it, and the crackling continues...
Please help?

Similar Messages

I was trying to restore my iPhone 4(iOS 7.0.4) on my hp Laptop. But when i was restoring, it gets stuck in middle. then i tried again but same problem. always stuck at the same point. plz help me.

i was trying to restore my iPhone 4(iOS 7.0.4) on my hp laptop. but when i was restoring, it gets stuck in middle.then it keep showing recovery mode screen and i tried again to restore but same problem. Always stuck at the same point. plz help me.

Hi Varinder Ghuman,
Thanks for using Apple Support Communities. If you're unable to restore your iPhone, this article may help:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Ari

When I was updating I Phone version 4 from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

HT201262 Blue/Gray Screen Stuck on Startup: Best Actions In Safe Boot?

My husband took his MacBook Pro into the Apple store for this problem a few weeks ago, but the blue/gray screen stuck on startup is back.
We stabilized the system last time from running diagnostic utilities (Apple, Onyx) in safe mode. Is there anything else we should be doing for self help? He's upgraded to Mountain Lion and made all OS updates. Advice is welcome.

See OS X Mountain Lion- If you see a blue screen at startup. I suggest the last recommendation - reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,thanks, Derek

Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek

Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek

When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

There is no way for anyone here to know if your replacement iPad is a refurbished unit. Per Apple's replacement policy, replacements can be refurbished units. If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

How do I "unshare" screen and go back to video chatting?

I was on a video chat with my daughter and started screen sharing to help solve a problem she was having. During screen sharing we could still talk back and forth so it was great.
However, when I'd finished using her computer I wanted to end screen sharing and go back to the video chat. I couldn't figure out how to do that without ending our chat session completely.
Anyone know how to end screen sharing and return to the video chat without having to start a new video chat?

It seems that Screen sharing effectively kills any video chat.
The Audio with the Screen sharing is a feature of the Screen Sharing and not the Video chat.
Effectively you ended the Video chat and have to start again.
9:21 PM Monday; November 12, 2007

Safari with 10.7.3 -Still no Screen Sleep Fix on HTML5 Video

Yesterdday 10.7.3 was released with new Safari and there is still NO fix for the Full Screen Sleep issue with HTML5 Video, whats wrong with you Apple, this bug is since Lion released with Safari,5.1 now 3 Versions later this small bug is still not fixed, but already known, i dont want to use Caffeine or such stuff, while Apple sugggests the Web to use HTML5 why is the support for basic Features so bad?

Solved!
A Workaround:
Get the Webkit Nightly Build , download and add to your App Folder, make it the Default browser, follow the instructions to show your homepage, after this you almost done, than download
RCDefaultApp, open System Preferences launch RCDefaultApp, go under Apps, search for Webkit and mark all all associations, Safari is no more dfeault for something, after this, go to Extensions Pane and search for the safariextz Extension, now set it to Webkit as well, now you are most up to date and Webkit updates more often than Safari ever did ^^
Enjoy

Black and green screen keeps flashing in my video - please help

i have a ..............
and every time i try to export my video black and green screen keeps flashing in my video can any one help
i think maby its bechuse im using a Macbook pro maby i need a better graphic card or much faster computer

Thanks, I will try that after a couple of days. I want to make sure that my iPhone is completely dry inside.
Anyone who knows how long it may take for an iPhone to dry inside after 2-3sec in water? Its in a bag of rice.

I want to export all the screen text in a long video to a text doc

I want to export all the screen text in a long video to a text document. Is there a way to do that without copying and pasting each item?

Fortunately, I still have the project ready at hand, so I can cut and paste each text window from there, but I do admire the creativity of your approach. I thought about making the desired document as a collection of still images without the video track removed, but I decided that would be too cumbersome for this purpose.
It still seems to me that there ought to be a way to access the text resident in FCP and turn it into a text file, but maybe this will have to written into the program as a feature. Probably, it would not be a high priority among all the other tasks on the wish list.
Thanks for your help. If I learn something interesting, I will post it for the benefit of others who might want do what I want to do now. Off I go now to cut and paste!

Black Screen When Trying To Play Videos

Hi,
Until recently I have been able to play movies on my iPod touch but after I restored it, I got a black screen whenever I open the video file. It is the proper format as iTunes accepts it and syncs it to the device. If I touch the play button, it shows the pause button for about a second and stops again. I have restored several times but I still get the same problem. I'm using iOS 4.3.3 and a 4th Gen iPod touch. Here are a couple of screenshots:
If I move the top slider to any time in the movie, it shows that scene as an image on the screen but will never play. Any suggestions?

In an attempt to consolidate numerous threads about video problems with Flash Player 11.2.202.228 I've created a new post where I'd like to have people who are still encountering this issue to either post or link to an existing post with their information.
Video investigation with Flash Player 11.2.202.228
We're asking for 4 pieces of information
1. A brief explanation of the problem
2. Did disabling hardware acceleration fix the issue
3. A sample URL
4. A copy of your dxdiag report
If you've already provided all 4 answers to us, thank you and please take a minute and copy the URL of your post (right click on the highlighted title of your post as shown in the example screenshot below) and paste it as a reply so your input is not lost.
If you haven't provided these answers, we ask that you take a few minutes and create a new post with the required information.

My ipad white-screened in the middle of updating ios 5.1...any ideas?

My ipad white-screened in the middle of updating ios 5.1...any ideas?

Its been on white screen for a day, its not recognised on iTunes anymore and iTunes says its in recovery mode and that I need to restore. Ive tried the restore 4 times and it doesnt do it, says there is an error....Help!

Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

You asked your question on the wrong forum. Try one for the Flash Player

Permissions Screen Stuck in Middle of Video

Similar Messages

Maybe you are looking for