Persist column values clicking on next or previous link of pagination

Hello All,
I have created one tabular form type report using apex APIs like apex_item.checkbox,apex_item.textfield etc
where i want to update the values of each rows , i have also implemented pagination also.
Actual problem is that i have 17 rows and pagination is set to 15 rows per page.
so my report have 2 pages ,one contains 15 rows and other has 2 rows,
In my case after entering data in page 1st , as i am clicking on next page then all the values which is entered in first page get reset,so only the value of page 2 is updated,
so i want all the rows get submitted with new value on clicking of final submit button.
Apex Version = 4.1.0
Database = 11g
Thanks,
Jitendra

So you would like the "next" pagination button to also submit the data on the page, then navigate to the next page of results? Or just have the first set of values stored in limbo somewhere until the user hits the submit button?
I'm not expert in tabular forms, but it sounds like you want your cake and eat it too

Similar Messages

Differentiate Next and Previous link click events in Table Region

Hello,
Is there a way to find out whether "Next" link or the "Previous" link was clicked in a Table region when the user tries to navigate to a different range set?
Both "Next" and "Previous" links raise the event "goto". I need to manipulate the range start and range size of another VO. i.e., if Next was clicked I would want to increase the range start of another VO and If "Pevious" was clicked, I would want to decrease this range start.
Thanks
Raja

Yes, this is clearly explained in dev guide, see Event Handling in table section in dev guide.
--Mukul

How to get the page number when click the(Next page) Icon on Tableview

Hi all,
       I had implemented a tableview in one of the Views that I had implemented for a BSP application. I am using MVC framework.
Let us assume when we execute the BSP and a table view got 11 pages.
How I can keep track of the page number when we click the (Next page, Previous page, Bottom , Top) Icons on my tableview . Is there any attribute willstore that corresponding page number of the tableview when we click the corresponding Icon's??
I had checked both CL_HTMLB_TABLEVIEW and CL_HTMLB_EVENT_TABLEVIEW Classes and i don't find any attribute.
Any help will be appreciated.
Thanks in advance.
Thanks,
Greetson

Hi Greetson,
I was thinking to write a weblog about that.
But now I would like to have your opinion:
I coded a generic method in my main controller (but you could also insert it in the application class) that save the firstvisible row in the class me->firstvisiblerowlist (that is a table)
DATA: l_firstvisiblerowlist TYPE zmmsp_tableview_1st_visi_row.
DATA: ff TYPE ihttpnvp,
        ffs TYPE tihttpnvp.
me->request->get_form_fields( CHANGING fields = ffs ).
LOOP AT ffs INTO ff.
    IF ff-name CP 'f*visiblefirstrow'.
      READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerowlist WITH KEY name = ff-name.
      CASE sy-subrc.
        WHEN 0.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          MODIFY me->firstvisiblerowlist FROM l_firstvisiblerowlist INDEX sy-tabix.
        WHEN 4.
          IF sy-tabix = 0.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
          ELSE.
            l_firstvisiblerowlist-name = ff-name.
            l_firstvisiblerowlist-value = ff-value.
            INSERT l_firstvisiblerowlist INTO me->firstvisiblerowlist INDEX sy-tabix.
          ENDIF.
        WHEN 8.
          l_firstvisiblerowlist-name = ff-name.
          l_firstvisiblerowlist-value = ff-value.
          APPEND l_firstvisiblerowlist TO me->firstvisiblerowlist.
      ENDCASE.
    ENDIF.
ENDLOOP.
Than you have to provide a generic method to read the firstvisiblerow for each tableview
GET_FIRSTVISIBLEROW
*IM_TABLENAME
*RE_VALUE
DATA: l_firstvisiblerow TYPE zmmsp_tableview_1st_visi_row.
READ TABLE me->firstvisiblerowlist INTO l_firstvisiblerow WITH KEY name = im_tablename.
IF sy-subrc = 0.
    re_value = l_firstvisiblerow-value.
ELSE.
    re_value = 1.
ENDIF.
And in the DO_REQUSET of each controller you could write something like:
* Paginator
DATA: l_tab1_visiblefirstrow TYPE sytabix.
l_tab1_visiblefirstrow = o_bsp_main->get_firstvisiblerow( 'f019id_tab1_visiblefirstrow'    ).
As usual pass the value to the view via:
o_page->set_attribute( name = 'tab1visiblefirstrow' value = l_tab1_visiblefirstrow ).
Did you get it?

Next and Previous Buttons

I have a bit of a strange issue. When I click the next or previous buttons iTunes goes to the next song or the previous song. The problem is that there is no way to rewind the song to the beginning. This is only happening on one of my computers. If I got to my Vista machine, 1 click of the previous button rewinds the song and a second quick click goes to the previous song. The real issue with this is that if I go past a song when it plays again later it picks up right where it left off rather then at the beginning. The strange thing is that my iPod is now having the same issues using the songs I uploaded from my second machine where in the past this issue never existed.

It sounds as though you have "remember playback position" set in Get Info.
Check one of the songs with get Info.
If many songs are affected or even all the songs, you can select the affected songs and then do a multiple Get Info>>Options tab. Do not change anything else as all selected songs will be changed.
Strangely, I think this also affects the rewind button in the way you describe.

Best way to compare column values of 2 different records

Hi,
In my PL/SQL cursor, I want to store the column values of the first record and compare it with the column values of the next record to compare if they have duplicate column values. Should I store the results of the first record with an array and the second item using the cursor? Can you provide me the best practices? Thanks.
DECLARE
CURSOR cs IS
SELECT
A,
B
FROM TABLE;
BEGIN
for rec in cs
loop
-- this is where I would like to store the column values of the first record and
-- then compare it with the column values of the 2nd record.
end loop;
END;

The best practice I can recommend would be to not use PL/SQL at all. Cursor FOR LOOPs are one of the slowest forms of processing.
You should investigate analytical functions such as LAG and LEAD at http://tahiti.oracle.com
It is always helpful to provide the following:
1. Oracle version (SELECT * FROM V$VERSION)
2. Sample data in the form of CREATE / INSERT statements.
3. Expected output
4. Explanation of expected output (A.K.A. "business logic")
5. Use \ tags for #2 and #3. See FAQ (Link on top right side) for details.

Next message / previous message shortcuts?

On my Outlook account at work, I can move through my messages by opening one message, and then clicking the "next message / previous message" arrows on the taskbar. The new message opens directly in place of the previous one.
In Mail, I have to close one message, return to the Inbox and then open the next message. I've looked through these posts, and in the OS X Tiger Missing Manual and can't find a similar keystroke/button to navigate directly from the message window.
I hate to acknowledge that MS EVER has a simpler, more efficient way to do anything, but I may have to make an exception here! Anyone got a clue?
Powerbook G4 Mac OS X (10.4.4)

Hello Ryan.
You can use keyboard shortcuts to take pictures of the screen in Mac OS X.
To take a picture of the whole screen, press Command-Shift-3.
To take a picture of part of the screen, press Command-Shift-4, then drag to select the area you want in the picture.
To take a picture of a window, the menu bar, the Dock, or other area, press Command-Shift-4, then press the Space bar. Move the pointer over the area you want so that it's highlighted, then click. If you decide you want to drag to select the area, press the Space bar again.
If you press Command-Shift-4 and decide you don't want to take the screen shot, press the Escape key.
Screen shots are saved as files on the desktop. If you want to put the screen shot in the Clipboard, rather than create a file, hold down the Control key when you press the other keys. You can then paste the picture into a document.
You can use the Grab application to take a picture of all or part of your computer screen.
Open Grab (located in /Applications/Utilities) and choose a command from the Capture menu.
Selection takes a picture of a part of the screen that you select.
Window takes a picture of a window you select.
Screen takes a picture of the entire screen.
Timed Screen lets you start a timer and activate part of the screen (such as a menu), and then takes a picture of the screen.
Follow the onscreen instructions.
To see information about a screen shot you've taken, such as the size and depth, choose Edit > Inspector.
To save a screen shot, choose File > Save. Grab saves screen shots as files in TIFF format. You can use the Preview application to view these files and export them to other formats, such as JPEG.

Calculating based on a previous value when initial column values differ from the rest

Let me preface this by saying I am new to the BO world. I'm trying to build a report/chart that tracks incoming loads. The first supply on hand value is pulled from the database and each successive supply on hand is based on the previous row's values.
In the supply arriving column below, the iniital value differs from the rest using the formula:
=If [Row Number]=1 Then [First Supply Arriving] Else [Supply Arriving]
The supply on hand uses the same idea, but is where I'm running into problems. The first column value should be [Supply On Hand], easy enough. Each successive column value needs to follow this equation:
Previous([Supply On Hand] (this won't always be [Supply On Hand] though, only for the second row essentially - problem 1) + Previous([Supply Arriving] (same as problem 1, where this is first supple arriving for the second row and then supply arriving moving forward) - [Usage Rate]
If someone could help me in getting the calculation to pull the previous values correctly without making a ton of variables, I'd greatly appreciate it. We just upgraded to 4.1

Yes, the supply on hand and the supply arriving from the previous row need added together. The usage rate, which is a constant is then subtracted from that. The result is the on hand total for the next day.
For example:
Date
On Hand
Arriving
Usage Rate
9/9/2014
100,000
250,000
100,000
9/10/2014
250,000
1,000,000
100,000
9/11/2014
1,150,000
0
100,000

How to Create process of Type : Get Next or Previous Primary Key Value

Hi,
Can anybody give the steps how to create the page process for type Get Next or Previous Primary Key Value in oracle Express database
Ramesh j c.

Hi Justin,
In oracle 10g XE , we have sample application v2.0
1. Do you have any Document to create step by step the sample application v2.0 and Is it possible to create all the pages of this sample application v2.0 b by wizard. To recreate or create the demo app, start from the home area,
next go to application builder,
then click the create button,
next choose "demonstration application"
and then you can choose "Run | Edit | Re-install" the "Sample Application" along with a few other apps.
2. When we install this sample application v2.0 , which is the sql script is executed or how it is installed. If you want the sample application you can export it after you create it if you want the SQL associated with it.
3. Whenever the sample application v2.0 is installed, how the encrypted pass word is created for the user demo and admin. This is setup with the application install. I don't believe it is encrypted either. If your wanting SSL there are some threads on here that talk about encrypting content.
Justin thanks for to create process Get Next or Previous Primary Key Value

Popup is not getting launched click on command link in table column value

Hi
We have a scenario where we bring the pop-up clicking on command link in the table column value. It was working fine before but from last few labels this is not working.
Here is the code snippet that we are using,
<af:table>
<af:column>
<af:commandLink>
<af:outputText value=”product name” />
<af:showPopupBehavior TriggerType=”click” PopupId=”::p1”/>
<af:commandLink>
</af:column>
</table>
<af:popup id=”p1”>
<af:dialog>
</af:dialog>
</af:popup>
Thanks,
Nagesh

It is important to set partialSubmit="true" in the <af:commandLink> tag. A full submit will be made otherwise and the popup will not show. Use also tryggerType="action" instead of triggerType="click" and use the proper chararcter case of the tag attribute names. Try with this:
<af:commandLink text="product name" partialSubmit="true">
<af:showPopupBehavior popupId="::p1" triggerType="action"/>
</af:commandLink>Dimitar

When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!

When click the email icon on my iphone, it opens on one email only. I can not go to the next or previous email, a different email or anything. It only gives me the option to move that email! How can I stop this. Its been working perfectly well before!

Now as you may know there is some icons at the bottom of the mail app, at the top left conner you should have the inbox button and on the upper right conner you should have two arrows to shift between emails. If any of those options works try :
Settings>General>Reset>Reset all Settings
If that does not work try to re add the account
Last but not least, restore as new.
Hope that helps.

Compare previous column value in BPS Layout

How to compare the two column values in BPS layout.
My layout format
PO NO
GL
Actual
Amount
1001
701
1200
User Entry
Actual Value is 1200, User will enter the Amount but it should be equal to 1200 or less then that.
If user entered more than 1200 in Amount column, I should get error message.
Thanks in advance.
Regards,
Kiruthika

Hi Uryukin Andrey,
Where do we need to use this fox formula? Could you please explain steps to use this FF?
Thanks,
Harry

How to not repeat the column values if repeated on next line and so on..?

Hi all,
The XmlP template that is designed gives me the output as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 695.00 cad
abc 2 1000.00 100.00 95.00 695.00 cad
abc 3 1000.00 100.00 95.00 695.00 cad
But my requirement is as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 795.00 cad
- 2 - 100.00 - - -
- 3 - 100.00 - - -
Note : "-" indicates blank column values (gaps are being filled)
How do I not repeat the column values if repeated?
Please let me know if you have answer for it?
Thanks in Advance
Munna

Iam trying to design the xml publisher template using xmlp template builder.
My requirement is :
For a receipt number, I have receipt amount, applied amount, unapplied amount and on account amount. And for each receipt, there can be multiple applied amount ( as the receipt can be applied multiple times), but the unapplied amount, on account amount and receipt amount is single.
By using the logic as said above from http://blogs.oracle.com/xmlpublisher/2007/04/13
Iam getting the output something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|-|-|
1112|-|228.98|-|-|
My requirement is to go get something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|0.00|0.00| ---> here lies the difference
1112|-|228.98|-|-|
How do i check the duplicate of the column values only for a receipt number??
Because as for receipt no. 111-b the unapplied amount and on account amount is 0.00, the the unapplied amount and on account amount for receipt number 1112 is getting hided( because its a duplicate) . In reality, it should be 0.00 and any other line for that receipt number (1112) should be hided. except for the applied amount.
Note We can see that last 2 columns in the last record( for receipt number 1112) is getting hided that is as expected but for 4th record the unapplied amount and on account amount should be 0.00 respecively.
'-' indicates hided value
Please help.
Thanks in Advance

Filter TOP query so that a result cannot be in the top if the column value is already present in a previous row

Hi,
Any help would be appreciated. I have a query that is the top(5) but I want them to be distinct on only one column value, not on the entire row. Any help would be really appreciated.
Regards,
Seamus

SELECT TOP 5 [DISTINCT COLUMN], MAX([SOME OTHER COLUMN]), MAX([SOME OTHER COLUMN], MAX([SOME OTHER COLUMN])
FROM [TABLE]
GROUP BY [DISTINCT COLUMN]
This will do it, but the values may display incorrectly, since it's taking the MAX value of each partition of your distinct column, so another way would be:
;WITH CTE AS(
SELECT *, ROW_NUMBER() OVER(PARTITION BY [DISTINCT COLUMN] ORDER BY NEWID()) AS RN
FROM [TABLE])
SELECT TOP 5 [DISTINCT COLUMN], [OTHER COLUMN], [OTHER COLUMN]
FROM CTE
WHERE RN = 1
Thanks.

How to tell if column value has changed for use in workflow actions

Hello,
I am using Sharepoint 2010 and for one of my Lists, I am using a general list workflow. What I need to be able to do is determine if a column value has change (say an "Assigned To" field) because I only want to take some action if that particular
value has changed. I want to be able to have a workflow action that would be something like:
If Current Item: Assigned To not equals [OLD VALUE]
I have found some web searches that talk about creating a duplicate list or duplicate (but hidden) column but that doesn't seem to be the way to go. I have document versioning set but don't if that can be used to help with this. One possible
thought (although I haven't tried it to see if it works) is to create local variables and have the values in the variables be the "old value". Just not sure if there is a best practices for doing this.
Thanks for any thoughts - Peter

Helen,
Not sure I fully understand your goal. We don't use "tasks" at all but if you are looking to have your workflow check certain valus and be able to send email messages to people based on whatever, then you can certainly do that (as long as your Sharepoint
has the email setup. We do this for alot of workflow tasks.
So, in the workflow you can have a blanket statement like what I previously listed:
if Current Item:hiddenStatus not equals Current Item:Status
    .... do something
or you can do something like:
if Current Item:hiddenStatus equals "In-Progress"
    .... do something
Else if Current Item:hiddenStatus equals "Completed"
    .... do something
or combine the two and do nested "if" statements. Then you add an email statement wherever you need it like:
if Current Item:hiddenStatus equals "Completed"
   then email "these users"
To add the email part, just type in "email" on the line where you want to add a statment. There is only one option to choose from. That will display the line "then email these users".   The "these users" will be a link. When you
click it you will get a popup to add the email info. We typically will send the email to a user (or users) that are already listed in one of the PeoplePicker fields. On the email form, you can type in your own text, designate that a value is based
on a column value (like our PeoplePicker), designate that a value is based on a workflow variable, add a link to the current item, etc. To get to these options you will click the button to the right of the fields or use the "Add or Change Lookup" button
in the bottom-left for the text area. There is alot you can set in the mail.
Does this help answer your question?
- Peter

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

Persist column values clicking on next or previous link of pagination

Similar Messages

Maybe you are looking for