How to not repeat the column values if repeated on next line and so on..?

Hi all,
The XmlP template that is designed gives me the output as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 695.00 cad
abc 2 1000.00 100.00 95.00 695.00 cad
abc 3 1000.00 100.00 95.00 695.00 cad
But my requirement is as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 795.00 cad
- 2 - 100.00 - - -
- 3 - 100.00 - - -
Note : "-" indicates blank column values (gaps are being filled)
How do I not repeat the column values if repeated?
Please let me know if you have answer for it?
Thanks in Advance
Munna

Iam trying to design the xml publisher template using xmlp template builder.
My requirement is :
For a receipt number, I have receipt amount, applied amount, unapplied amount and on account amount. And for each receipt, there can be multiple applied amount ( as the receipt can be applied multiple times), but the unapplied amount, on account amount and receipt amount is single.
By using the logic as said above from http://blogs.oracle.com/xmlpublisher/2007/04/13
Iam getting the output something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|-|-|
1112|-|228.98|-|-|
My requirement is to go get something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|0.00|0.00| ---> here lies the difference
1112|-|228.98|-|-|
How do i check the duplicate of the column values only for a receipt number??
Because as for receipt no. 111-b the unapplied amount and on account amount is 0.00, the the unapplied amount and on account amount for receipt number 1112 is getting hided( because its a duplicate) . In reality, it should be 0.00 and any other line for that receipt number (1112) should be hided. except for the applied amount.
Note We can see that last 2 columns in the last record( for receipt number 1112) is getting hided that is as expected but for 4th record the unapplied amount and on account amount should be 0.00 respecively.
'-' indicates hided value
Please help.
Thanks in Advance

Similar Messages

  • How to not display the column header in the table view?

    I do not want to display the column header in the table view, how can I achieve it?

    If you're using JavaFX 8 you can use the following in an external style sheet:
    .table-view .column-header-background {
      -fx-pref-height : 0 ;
    If you're using JavaFX 2.2, the -fx-pref-height attribute is not available in css, so I think you have to resort to a lookup:
    final Region tableHeader = (Region)table.lookup(".column-header-background");
        tableHeader.setPrefHeight(0);
    As always, I feel obliged to point out that I don't really like lookups. Sometimes they seem to be the only way, though.

  • How to store all the columns values into one single column

    Hi All,
    this is my file layout,i am receiving the data in below format only
    emp_no,c1,c2,c3,c4,c5
    100 ,1 ,0 ,1 ,0,1
    200 ,1 ,0 ,1 ,0,1
    300 ,1 ,0 ,1 ,0,1
    but i want to store that above data into my table like(from c1 to c5 columns values i want to store in period column)
    emp_no,period
    100 ,1
    100 ,0
    100 ,1
    100 ,0
    100 ,1
    200 ,1
    200 ,0
    200 ,1
    200 ,0
    200 ,1
    300 ,1
    300 ,0
    300 ,1
    300 ,0
    300 ,1
    please help me

    Strange but this is it
    Processing ...
    with original as (
         select 100 as id ,1 as v1,0 as v2,1 as v3,0 as v4,1 as v5
         from dual
         union all
         select 200 ,1 ,0 ,1 ,0,1
         from dual
         union all
         select 300 ,1 ,0 ,1 ,0,1
         from dual
    select id,v1 as res_row
    from original
    union all
    select id,v2
    from original
    union all
         select id,v3
         from original
    union all
         select id,v4
         from original
    union all
         select id,v5
         from original
                      ID                                   RES_ROW
                                       100                                      1
                                       200                                      1
                                       300                                      1
                                       100                                      0
                                       200                                      0
                                       300                                      0
                                       100                                      1
                                       200                                      1
                                       300                                      1
                                       100                                      0
                                       200                                      0
                                       300                                      0
                                       100                                      1
                                       200                                      1
                                       300                                      1
    15 row(s) retrievedBye Alessandro

  • How to get all the column values from a table source

    Hi,
    I have created one table source on a employee table and some customized attributes using global settings>search attributes.
    Now these customized attributes mapped with the table columns through attribute mapping from the sorce tab.
    Using doOracleSearch method i passed last parameter i.e. Integer array of customized attributes.
    After execution of doOracleSearch method i am getting the results but customized attributes are not coming.
    getCustomAttributes method returns null instead of some values.
    Please refer following code for more info:
    Integer[] fetchAttr=new Integer[2];
    fetchAttr[0]=new Integer(137);
    fetchAttr[1]=new Integer(138);
    result =
    stub.doOracleSearch("BTM",
    new Integer(1),
    new Integer(10),
    Boolean.TRUE,
    Boolean.TRUE,
    group,
    "en",
    "en",
    Boolean.TRUE,
    null,
    null,
    fetchAttr);
    ResultElement[] resElements = result.getResultElements();
    for(int i = 0; i < resElements.length; i++)
    System.out.println("Title : " + resElements[0].getTitle());
    System.out.println("Snippet : " + resElements[0].getSnippet());
    System.out.println("URL : " + resElements[0].getUrl());
    System.out.println("non default : " + resElements[0].getCustomAttributes()); // it returns null here
    }

    Confirm the attributes you are asking SES for match those on the data source being searched. One thing to try is to simply tell SES to return all custom attributes for your search. Here is a snippet to build a list of all attribute IDs and pass them to your search...
    // Create and set SOAP URL
    OracleSearchService searchService = new OracleSearchService();
    searchService.setSoapURL("http://myserver:7777/search/query/OracleSearch");
    // Set attributes to fetch (all)
    Attribute[] attributesAll = searchService.getAllAttributes("en");
    ArrayList<Integer> attributeIds = new ArrayList<Integer>();
    for(Attribute a: attributesAll)
    attributeIds.add(a.getId());
    Integer attributeIdArrayAll[] = new Integer[attributeIds.size()];
    attributeIdArrayAll = attributeIds.toArray(attributeIdArrayAll);      
    // Query
    OracleSearchResult result = searchService.doOracleSearch("some text", ..........[other params], attributeIdArrayAll);
    // Print out results
    ResultElement[] resElements = result.getResultElements();
    for(int i = 0; i < resElements.length; i++)
    // Get document
    ResultElement doc = resElements;
    // Print Title
    System.out.println("Title: " + doc.getTitle());
    // Print custom attributes
    CustomAttribute[] attributes = doc.getCustomAttributes();
    for(int j = 0; j < attributes.length; j++)
    CustomAttribute attr = attributes[j];
         System.out.println("[Custom Attribute] " + attr.getName() + ": " + attr.getValue());
    Hope this helps.

  • How to  not update the model value whe, multiple back-end validation failed

    Hello !
    I have a save button who perform in backend code multiple validations on some fields. The validations can be ok, if not, I show specific error messages in my page. It's working fine.
    The problem is that all the InputText I need to valid are value binded with value=#{backing.somepropery} to the model and when the code of the ActionEvent is called the model was already update.
    So the validation is useless, you see error message ok but I can't prevent action to be done.
    As the validation occurs only when I press a specific button I can't use custom validator.
    does someone have an idea to manage that ?
    Thank You.
    Dan.

    Thnaks for your repsonse but, it"s not working because the values are bound so the modifications are already done.
    I'm sure that there is a way to do that.

  • In making a monthly budget how do you repeat for next month and update the dates to the next month?

    i want to make my budget speadsheet update the month and date as it goes to the next month automatically, from sheet to sheet.  is there any way to make this happen?

    You could have a cell where you enter the month and year...
    Or you could pull the month and year from the first entry in the date column.  Like Barry I would want more information regarding your  set up before proposing any other, more specific, ideas.

  • How to get the column values from a BC4J View Table in UIXML?

    I am using a default UiXML Application for Order Entry system with Orders & Order Lines & Customers. I have a uix file OrdersView1_View.uix which displays (no updateable columns) all the Orders. How do I get the column value of a selected row in a BC4J Table (example:OrdersId) when a Submit button is pressed using UIXML or Java Classes?
    I appreciate any help on this.

    Hi,
    You need to use keyStamp, an example:
    <bc4j table name="orders">
    <bc4j:keyStamp>
    <bc4j:rowKey name="key" />
    </bc4j:keyStamp>
    Furthermore, you can automatically send the selected row key using the go event handler, so in the handlers section you could send the key to an orderInfo page:
    <event name="show">
    <!-- forward to the update page, passing
    the selected key as a page property -->
    <ctrl:go name="orderInfo" redirect="true">
    <ctrl:property name="key">
    <ctrl:selection name="orders" key="key" />
    </ctrl:property>
    </ctrl:go>
    </event>

  • Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

    Hi,
    How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
    For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
    Regards,
    Raghu

    Hi,
       Try the following...
    DATA : it_fields like help_value occurs 1 with header line.
    data: begin of w_vbap,
            vbeln      like vbap-vbeln,    
            posnr      like vbap-posnr,   
            werks      like vbap-werks,  
          end of w_vbap.
    data: i_vbap   like w_vbap   occurs 0 with header line,
             w_fields type help_value,
          i_dfies type table of dfies,
          i_return_tab type table of ddshretval with header line,
          i_field  type dfies.
      select vbeln posnr werks
          from vbap into table i_vbap up to 5 rows.
    if sy-subrc = 0.
       sort i_vbap by vbeln.
    endif.
      clear it_fields[] , it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'VBELN'.
      it_fields-selectflag = c_on.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'POSNR'.
      it_fields-selectflag = space.
      append it_fields.
      it_fields-tabname = c_vbap.
      it_fields-fieldname = 'WERKS'.
      it_fields-selectflag = space.
      append it_fields.
      loop at it_fields into w_fields.
        i_field-tabname   = w_fields-tabname.
        i_field-fieldname = w_fields-fieldname.
        i_field-keyflag   = w_fields-selectflag.
        append i_field to i_dfies.
      endloop.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield               = 'VBELN'
         window_title           = 'Select'
        tables
          value_tab              = i_vbap
          field_tab                = i_dfies
          return_tab             = i_return_tab
       exceptions
         parameter_error        = 1
         no_values_found        = 2
         others                 = 3
      read table i_return_tab into w_return_tab index 1.
      if sy-subrc = 0.
      endif.
    Regards,
    Srini.

  • How to not display the messageField in an IconItemRenderer

    Hello,
    how to not display the messageField in an IconItemRenderer, just display labelField and icon.
    Thanks

    If you're using JavaFX 8 you can use the following in an external style sheet:
    .table-view .column-header-background {
      -fx-pref-height : 0 ;
    If you're using JavaFX 2.2, the -fx-pref-height attribute is not available in css, so I think you have to resort to a lookup:
    final Region tableHeader = (Region)table.lookup(".column-header-background");
        tableHeader.setPrefHeight(0);
    As always, I feel obliged to point out that I don't really like lookups. Sometimes they seem to be the only way, though.

  • Cost grouping exit (PBEN0004) is not outputting the cost values

    Hi,
    Client requirement is adding a custom field for vesting in 171 infotype, based on this status we have to make the correct cost grouping in the user exit.
    I have incorporated the logic in the user exit. When I execute PA30 transaction for infotype 167, it is triggering and giving the right cost group. But after successful execution it is not showing the cost values(giving initials).
    My self and functional guys checked the config steps and placed perfectly, technically nothing wrong in the user exit. So i am in big confusion. Please share your experience in this regard if you come across before and suggest if you have best solution.
    Thank you.
    Ravi.

    Dear Ajay,
    I have already included the same cost center in splitting structure.
    I have solved the problem but some doubt in my mind.
    1) I have maintained 11 equivalence no. instead of 1. problem is resolved.
    but my question are
    a) I dont want equivalence no. in kp26. Is it require for revaluation of activity type?
    b) when i changed equivalence no. from 1 to 11.Problem is resolved.What is the logic behind it.
    regards
    RR

  • How to update zero to a column value when record does not exist in table but should display the column value when it exists in table?

    Hello Everyone,
    How to update zero to a column value when record does not exist in table  but should display the column value when it exists in table
    Regards
    Regards Gautam S

    As per my understanding...
    You Would like to see this 
    Code:
    SELECT COALESCE(Salary,0) from Employee;
    Regards
    Shivaprasad S
    Please mark as answer if helpful
    Shiv

  • How to get the column values

    hi
    i am new to programming... i would like to know how to get the column values... i have a resultset object
    i need code .... asap
    thnx

    @OP: It is always good to type complete sentences and describe your problem at length. It helps in letting people know what you really need instead of making wild guesses or silly jokes. You post mentions that you get the ResultSet. Then you should look up the API docs for java.sql.ResultSet and take a look at the getxxx() method signatures. Use the ones which suit the specific case.
    Besides, it is good to refrain from using asap and urgent. Even if something is urgent to you, it need not be urgent to others. Wording a question properly would attract better replies.
    Finally, would you mind getting down to specifics of your problem? From what I perceived, the JDBC tutorial and the API docs should provide all the information you need.

  • How can I reference the last value in a column?

    How can I reference the last value in a column? For example, today I want the value of A1 to appear in another cell. Tomorrow, I will add a row and want to reference A2, next day A3, and so forth.

    Now I got it:
    =OFFSET(A1,COUNT(A)-1,0)

  • Keyboard column not working - the column of keys containing screen bright, 2, x, w, s does not work - all else is OK.  How do I fix?

    The keyboard column is not working the column containing screen brightness, the number 2, X, W and S does not work. How do I fix this?

    Some older scanners don't support presets. If this is the case, you can try this workaround as taken from this technical note Error: Bad Parameter | Acrobat.
    In the Configure Presets dialog, choose the scanner attached to your computer from the Scanner pop-up menu.
      From the File menu, choose Create > PDF from Scanner > Configure Presets.  
      In the Configure Presets dialog, click the pop-up menu to the right of the Scanner field and choose the scanner connected to your computer.
      Click OK, and then choose Create > PDF From Scanner.

  • How can I validate a dropdown box to NOT accept the default value?

    I have a fillable form where I need the user to select their "Number of Employees". I have added several ranges as their options in a dropdown box (1-10, 11-25, 26-50, 50+). My issue is the "defult value" is set to "1-10" and people submit it without changing it to the correct value.
    I have changed the default value to "--Select One--", but it still lets them submit the form with that value entered.
    I am assuming I need some sort of validation script that will basically say - "If the value in this field is --Select One-- do not submit the form, but give an error that says 'please select your number of employees" or something along those lines.
    Basically I just want them to pick something as opposed to just submiting it with the default value.
    I have looked all over and am not very good with JS.

    You can not have the default value set to a real possible value. You need a value that should be selected.
    Then for your submit script you need to test all of your required fields to make sure they are not at the default value.
    You make a variable that assumes all the required fields are completed and then check each field and if any one still has the default value you set your variable to "false" and then when you have checked all the fields you test your variable's value and only if it is true to you submit the form.
    var bSumbit = ture; // logical variable for submission test
    // test drop down # of employess
    this.getField("Number of Employees".).required = false; // clear required property
    if(this.getField("Number of Employees".).value == "--Select One--") {
    bSubmit = false;
    this.getField("Number of Employees".).required = true; // set required property
    if(bSubmit) {
    // your submit acation;
    } else {
    app.alert("Not all required fields properly completed", 0, 1);

Maybe you are looking for

  • ITunes is empty, how do I get my files back into it?

    This morning I was trying to clean up my Macbook, get rid of applications I'm not using, clearing caches etc. (Everything was seeming to run a bit slow - which prompted the attempt to clean up unnecessary stuff) Something ended up happening with my i

  • Download PDF file from Application Server in BSP

    Hello, We have a requirement on which we want to download a PDF file stored in Application server using BSP application. I have used function module  ARCHIVFILE_SERVER_TO_CLIENT but this FM will help only if i want to download file from GUI it won't

  • Add field to MSS General Information

    Hi experts, I'm trying to customize the iviews in MSS > General Information to add fields to the iViews. Thus, I need to identify what are the function modules they are calling. However, when I open sap.com/mss~eepro/ Web Dynpro component in NDWI, I

  • Blue tooth keyboard will not discover on my white 24" MAC

    The keyboard is undisoverable and I have tried the online troubleshooting.

  • Change marge field after dragging contact from Addressbook

    Hi, is there a way to change via applescript a merged field automatically after dragging a contact from the Adressbook to a pages 09 document? What i am trying to do is parsing the Information of a certain Addressbook field in the format "City** Hote