Persistent cache issue in Data Services

Hi,
I have created a Persistent cache Datastore in Data Services and provided C:\cache as the Cache directory. cache is the new dir. that i created in my local C drive. This is the machine where designer has been installed. The job server is in another machine.
I am loading data from one table into a Persistent cache table in Persistent DS. While running the job, i am getting the below error:
Cache directory <C:\cache> does not exist for persistent cache table <.....> in data store <.....> for <configuration1> configuration.
Any views regarding this?
Thanks!

Hi,
Since you are running a job, create the path on application server.Create a folder structure in your application server and then use that path. you will have to create logical path and file name for that.
Hope it helps
Godhuli
Edited by: Godhuli Pandey on Aug 18, 2009 5:53 PM

Similar Messages

  • Connection issue between Data service(DQ) to PI through SOAP adapter.

    Hi Guys,
    We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
    I tried the same file using xmlspy and PI receiving the messages from XMLSPY. We are wondering whats going wrong?
    Any idea about this data services system? Is there any other better way to receive messages to PI apart from webservices?
    PS: Connection is working fine from PI to DQ thorugh SOAP adapter.
    Thanks
    Deepthi.

    >>>> We are trying to connect the data services(DQ) with SAP PI through SOAP adapter. I provided the wsdl file to data services team and they are trying to send messages to PI. Looks like the messages are showing successful in there system, but not showing up in PI system.
    You are using soap sender  adapter ... Hosting webservices and DQ team is able to access your webservice.  Also using XMLSPY you are able to see pi messages.
    If you are using advance adapter engine, Please check only in the RWB -> adapter engine.
    If you are not using AAE, check in both SXMB_MONI and RWB for the wide range... Something problem with filter query in your checking...
    Note  since XMLSPY testing goes through Pi and able to monitor means you dont need another webservice client tool. 
    Solution:
    use tcp monitor to monitor the soap message ... It is better option
    /people/stefan.grube/blog/2007/03/29/troubleshooting-soap-http-and-mail-adapter-scenarios-with-tcpgateway

  • Issue with Data Services.

    <b>Description:</b> There are no any opportunities of submitting web-enable Data Services from client service control(WorkShop 9.2 beta) based on WSDL.
    <b>Step to reproduce:</b>
    1. Create any data service.
    2. Create web-enable data service (http://edocs.bea.com/aldsp/docs21/appdev/wsdlclt.html#wp1056096).
    3. Modify a method “submit” as it was described in (http://edocs.bea.com/aldsp/docs21/appdev/wsdlclt.html (See point: Developing DSP-Enable Read-Write Web Services)).
    4. Generate a client service control(WorkShop 9.2beta) based on WSDL of web-enable data service.
    5. Try to submit any data changes with method “submit”. (There are no any opportunities of submitting).
    Could anybody explain me how I can submit(store) data with
    service control(WorkShop 9.2 beta) based on WSDL of web-enable data service?

    I think if you switch the order of (2) and (3) you'll get what you want.
    If you generate the WSDL before introducing the 'submit' method, your wsdl won't have a submit method.
    "Developing DSP-Enabled Read-Write Web Services
    If your Web service must support submits from Java Web service clients, you first need to modify the JWS file before generating the WSDL, as follows..."

  • Mapping issue in Data Services

    Hello, Experts!
    I'm just starting to learn DS. Can anybody help me with the following question:
    I have a table, for example:
    id  Curr value
    1  USD  100
    2  JPY  200
    3  USD  300
    4  JPY  400
    5  EUR  500
    And the issue is to map it so as to check the condition of belonging "Curr" to the sets (JPY, USD) and (EUR, USD), and the following table would be obtained:
    id Code Curr Value
    1  AAA  USD  100
    2  AAA  JPY  200
    3  AAA  USD  300
    4  AAA  JPY  400
    4  BBB   USD  100
    5  BBB   USD  300
    6  BBB   EUR  500
    The main difficulty lies in putting the checking parameters into an additional table, so user can vary the members and quantity of combinations
    The mapping should exist in Query transform
    BR, Alexey
    Edited by: Alexey Veselov on Dec 12, 2011 2:20 PM

    Hi Alexey,
    Could you elaborate on the requirement? It is still not clear to me what you want to achieve.
    What I do understand is that the users should be able to make adjustments to the mapping/lookup entries.
    If that is the case, what exactly is going to be maintained in the 'additional table' and how are you suggesting end users are going to maintain this?
    Ideally, your query transformation should not change when parameter values change, so you have to think about what logic you put where.
    My suggestion would be to use a file or a table which can be maintained by users. In your query transformation you can then use the lookup or lookup_ext function.
    Especially with lookup_ext you can make it as complicated as you want. The function is well documented but if you need help then just reply and explain in a bit more detail what you're trying to do.
    If you do think the 'hard-coded' option would suit you better, you can look into the 'decoce' function. Again, it is well documented in the technical manual.
    Jan.

  • New iPhone 5 "not subscribed to a mobile data service". I have reset mobile network setting several times but issue persists.

    I am having a similar problem with my new iPhone 5. I just bought it few days back but unable to use the internet. I am getting a message "not subscribed to a mobile data service". I have reset mobile network setting several times. But the problem doesn't go away.

    agree m also having same problems and same notifications...

  • Unable to connect to the selected mobile data service, please try again later. If the problem persists please contact your administrator

    Since last week or 2 weeks ago, some of our users (both Batam and Singapore) here encountered a problem where they are not able to browse the Internet on their BB as they used to.
    Example :
    I did a test to browse on their BB
    www.cnn.com
    they will see below error:
    “Unable to connect to the selected mobile data service, please try again later.
    If the problem persists please contact your administrator “
    However if we use ‘Google’ or  ‘Yahoo’ search on the BB and entered ‘CNN’ and run a search on it.
    We are able to open the CNN  website – from the link result search by Yahoo or Google
    It’s also applicable to other websites too.
    Any idea?

    Hi thatemailguy,
    Are the users on a BlackBerry Enterprise Server?
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Master data services 2012 domain trust issues

    hi,
    we have a Master Data Services 2012 installation within one domain and the users exist within another domain.  This has a selective trust both ways.
    the behaviour that we are seeing in MDS 2012 when adding users to the master data services from the other domain we are getting no exact match found for the users that exists when adding users in;  these users are from the domain that MDS does not reside
    in but there is a trust in place.
    we have given authentication permissions to all users requiring access to the server that MDS resides on.
    the question is what steps are necessary to allow MDS to operate in two domain environment.   We have other applications that function in this manner but MDS is causing issues.
    any help would be appreciated..
    thanks

    I don't have the exact multi domains environment to try it on. But I tried on mutil forest domains. It seems working fine.
    When add the user, the format is like [DomainName\]UserName
    When add the user for another domain, the domain name is required.
    There is a trust between our two domains (which works because I can log into SQL Server effortlessly with SSMS). However, when I try to add a user from the other domain, I get the error
    "No exact match was found for domain\user"
    It seems that MDS really doesn't like trusts.
    MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

  • Error when caching data locally using LiveCycle Data Services

    Hi all,
    I developing a mobile application support working offline. I using cache feature of LiveCycle Data Services.
    This is my datasevice ( it has associate to others dataservice ) and autoSaveCache = true and cacheID = "xxx":
    <destination id="expenseData">
              <properties>
                        <source>expense.ExpenseDataAssembler</source>
                        <scope>application</scope>
                        <item-class>expense.ExpenseData</item-class>
                        <metadata>
                                  <identity property="id" />
                  <one-to-many property="expenseItems" destination="expense-item" />
                        </metadata>
              </properties>
    </destination>
    when I run application in the first, it run nomarly but when I close and run it again , i get the errror message as below :
    Error: Object instance needs an mx_internal::referencedIds property inorder to be managed: Object
              at mx.data.utils::Managed$/getReferencedIds()[C:\depot\DataServices\branches\milestone\adepd s46_rc\frameworks\projects\data\src\mx\data\utils\Managed.as:292]
              at mx.data::DataStore/restoreAssociations()[C:\depot\DataServices\branches\milestone\adepds4 6_rc\frameworks\projects\data\src\mx\data\DataStore.as:5010]
    - The error message not showed when I remove line <one-to-many property="expenseItems" destination="expense-item" /> .
    Please help me if you know about this problem.
    Thanks so much.

    no body help me !!!

  • My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    Howdy eewebe13,
    So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
    Please step through this article for that scenario.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Thank you for visiting Apple Support Communities.
    Nubz

  • Flash Builder 4, Data Services, PHP issue

    I have installed a fresh Galileo + Fb4 plugin + WST for eclipse on my dev server/workstation.
    I have installed a standalone Fb4 on my laptop.
    When I use the shwanky new Data services feature and create a PHP service... I can create the service fine... but there are no methods showing up for the data service/class. The class shows up in the Data/Services list -- and when I right-click -> Refresh (other options are greyed out) I get the following alert Error message:
    java.lang.IllegalArgumentException: protocol = http host = null
    I click OK and procede in my ignorance to scour the internet for a solution...
    I feel like a teenager who was given a brand new Corvette (Fb4)... only.... the key doesn't seem to fit the ignition.  I CANT WAIT to drive it!
    On a side note.... my laptop works fine? Go figure. I can right click and get all the goodies (Configure Return Type, etc.) that I'm suppose to get on that installation...
    I would like to get this working on my dev workstation. Is it something to do with Fb4 as a plugin on top of Zend PDT?
    Does anyone know where to look (maybe a config file or setting) that sets the value for this:
    java.lang.IllegalArgumentException: protocol = http host = null
    I know that I had to edit my shortcut and add:  -vm "C:\Program Files\Java\jre6\bin\javaw" to get the java vm to work correctly and launch Gallileo

    I don't know where else to post  this question ...so apologies if this is not the proper spot
    I have created several classes in Flash 4 Professional and would like to know how do I create custom classes in Flash Builder 4
    this is one such class that i have created and wnat to use in FB 4..below
    package classes.choppingblock.video{
         import flash.events.*;
         import flash.display.*;
         import classes.*;
         public class YouTubeLoaderPlus extends YouTubeLoader {
              public static var PLAYER_READY:String = "playerReady";
              public static var VIDEO_READY:String = "videoReady";
              protected var _count:Number = 0;
              function YouTubeLoaderPlus() {
                   super();
                   this.addEventListener(Event.ENTER_FRAME, checkPlayerReady);
                   this.addEventListener(YouTubeLoaderPlus.PLAYER_READY, ytPlayerReady);
                   this.addEventListener(YouTubeLoaderPlus.VIDEO_READY, ytVideoReady);
              private function ytPlayerReady(e:Event) {
                   this.setSize(450, 370);
              private function ytVideoReady(e:Event) {
                   this.pause();           
              private function checkPlayerReady(e:Event) {
                   _count++;
                   if(_count >= 50){
                        this.removeEventListener(Event.ENTER_FRAME, checkPlayerReady);
                        dispatchEvent(new Event(YouTubeLoaderPlus.PLAYER_READY));
              private function checkVideoReady(e:Event) {
                   if(this.getDuration()){
                        this.removeEventListener(Event.ENTER_FRAME, checkVideoReady);
                        dispatchEvent(new Event(YouTubeLoaderPlus.VIDEO_READY));
              override public function loadVideoById (id:String, startSeconds:Number = 0):void{
                   super.loadVideoById(id, startSeconds);
                   this.addEventListener(Event.ENTER_FRAME, checkVideoReady);
    Where would i develop an analogy of this code in Flash Builder 4 for custom classes?

  • Master Data Services Add-in for Excel Issue

    I am trying to configure MDS in the Production server. I am running into isssues.
    (I was able to do the whole process successfuly in my local system - Versions are same in the local and server - Only difference is local machine is windows 7 server is Windows 2008 R2)
    I have installed SQL server 2012 Enterprise Version SP1. I am able to browse the MDS URL. User has got full permissions. When I try to access the MDS via Excel I get the below error.
    Can any one help me please I have spent days on this withou any joy.
    Error message
    TITLE: Master Data Services Add-in for Excel
    An error occurred while receiving the HTTP response to
    http://MYIPADDRESS/mds/service/service.svc/bhb. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See
    server logs for more details.
    ADDITIONAL INFORMATION:
    The underlying connection was closed: An unexpected error occurred on a receive. (System)
    Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. (System)
    An existing connection was forcibly closed by the remote host (System)
    BUTTONS:
    OK
    Bn

    I have finally found a solution for this problem!  Every time I opened Excel (unless I ran as administrator) I would have to activate the MDS add-in; this was time-consuming and annoying. It seems like there was no solution posted online anywhere! Well
    after much aggravation, I have finally found a solution:
    Fixing the Microsoft MDS Excel Add-In so it Stays Enabled
    Press the Start button (Windows button)
    In the search bar type “REGEDIT”
    Open regedit.exe
    A pop-up will ask permission for the Registry Editor to make changes to the computer, select Yes.
    In the Registry Editor expand HKEY_CURRENT_USER
    In the HKEY_CURRENT_USER folder, expand in the following order:  Software -> Microsoft -> Office -> Excel -> Addins
        Select Microsoft.MasterDataServices.ExcelAddIn
    Double-click on LoadBehavior in the right panel
        In the Edit Value popup, change the value to 
    Press OK
    Exit the Registry Editor
    The excel add-in should now be active anytime you open Excel. If multiple errors occur while using the add-in, the Load Behavior may change back to 0.  If that occurs simply follow these steps so the add-in will be active when Excel starts up.
    I hope this helps some of you avoid the long hours of trying to find a solution to this silly problem.
    Cheers!
    Tony

  • Issue while using views in Data services Jobs

    Hi,
    In Data Services Job, i am trying to pull data from a view to a table. The view is pointing to the table which is in other database.
    The problem is when i import the source view into data services and view the data, i found one row having wrong data. The values in that row are wrong/corrupted while the same row in the source table is having correct values
    I queried the view from TOAD for that record. The values are valid.
    The data is coming wrong only in Data services. Any row in that table gets corrupted, there is no specific row.
    Hence while running the jobs i am getting errors.
    Any idea what can be the reason of getting corrupted data in view while same view when queried from TOAD gives correct values?

    hi,
    There is a possibility of unsupported data type by data service, please share the data service version,  database type and data type of column which got corrupted.
    Regards,
    M Ramesh

  • Data Services Designer Issue with Job Server

    I am on Business Objects Edge Pro using the Data Services Designer.  When I try execute a job I get "The job server you have selected is not working."  In addition to that when I try to make any personal change to the environment I get a BODI-1260016 error.  Finally when you go to the help and about they show both the Job Engine and Job Server not responding. 
    I have opened up my CMC and it shows all servers enabled and functioning.  I do not know where to go from here.
    Thanks
    Cassidy

    Voila. I know I am a bit late to the conversation, but here was my solution. I was running Designer on my local machine. We also have Designer on the server. So I decided to remote to the server and compare settings. When the server desktop came up, good old Windows was there, announcing that BODS had changed since the last time it was run, and would I like to allow it to run (Y/N/Cancel)? Thanks, Windows. I said Yes, then went back to my local workstation, tried again to run a job, and no problem.
    This has happened with other software services (scripted ftp for example) that run on servers. Seems it can happen after a Microsoft Tuesday, or after software is upgraded. Always remember to log on to the server and clear any security dialogs that are preventing your service from running. Not really a BO solution, but it was my solution. YMMV.

  • Beta 2: Connect to ColdFusion Data Service issue

    I installed Beta 2 and am re-doing my data services for a Beta 1 app now since package names, etc. have changed in Beta 2. When I go to the Connect to ColdFusion Data Service wizard and point to my .cfc, the accompanying"Service Operations" dialog box is blank, it no longer shows any of the operations in my .cfc, so I'm not able to select any.
    Why is it doing this?

    That is the right directory. Not sure as to why that file is not there, but method-access-level tag that I was mentioning, if it is set to remote, then you can see only those functions that have access = "remote", so in all probability wherever that value is it is set to remote (probably in services-config.xml itself, are you using 8.01 or 8.0?)
    So, just change the access attribute in cffunction to remote, you should be able to see the functions.
    Thanks
    -Sunil

  • ADEP Data Services JEE 4.6 related Issue.

    Hello,
    I tried to use build simple application in Flash Builder 4.6 with data model i.e. model driven development. I tried to follow the example of lcds data services but doesn't work for me.
    I am able to generate the tables and able to generate form and display data in the datagrid without writing single line of code.
    But when I try to insert data I get errror. And I am not able to go ahead since last few days.
    Please help me.
    Even if somebody can give me some detailed example for this...that would be helpful.
    Thanks alot,

    More over..
    this is I found in the tomcat server log....
    Data Services] Error notifying transaction before completion
    handlers: org.hibernate.TransactionException: JDBC commit failed
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:157)
    at
    flex.data.adapters.FlexHibernateSessionContext$SessionSynch.beforeCompletion(FlexHibernate SessionContext.java:139)
    at
    flex.data.DataServiceTransaction.notifyBeforeCompletion(DataServiceTransaction.java:2069)
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1673)
    at flex.data.DataService.serviceTransactedMessage(DataService.java:1028)
    at flex.data.DataService.serviceMessage(DataService.java:528)
    at flex.messaging.AsyncMessageBroker.in(AsyncMessageBroker.java:414)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.filters.AsyncMessageFilterChain.in
    (AsyncMessageFilterChain.java:205)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.AsyncMessageBroker$EndpointSplitter.in(AsyncMessageBroker.java:809)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.endpoints.BaseSocketServerEndpoint.in
    (BaseSocketServerEndpoint.java:476)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.endpoints.RTMPConnection.handleTCCommandIn(RTMPConnection.java:886)
    at flex.messaging.endpoints.RTMPConnection.in(RTMPConnection.java:1032)
    at
    flex.messaging.endpoints.RTMPConnection.serviceTCMessage(RTMPConnection.java:1116)
    at flex.messaging.endpoints.RTMPConnection.doRead(RTMPConnection.java:654)
    at
    flex.messaging.endpoints.RTMPProtocolHandler.doRead(RTMPProtocolHandler.java:124)
    at
    flex.messaging.socketserver.Connection$ConnectionReader.run(Connection.java:874)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:680)
    Caused by: java.sql.SQLException: StandardXAConnectionHandle:commit:This
    connection is part of a global transaction
    at
    org.enhydra.jdbc.standard.StandardXAConnectionHandle.commit(StandardXAConnectionHandle.jav a:129)
    at
    org.hibernate.transaction.JDBCTransaction.commitAndResetAutoCommit(JDBCTransaction.java:16 6)
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:142)
    ... 22 more
    Error while completing transaction:
    flex.data.DataServiceException: Error occurred completing a transaction
    stacktrace=flex.data.DataServiceException: Error occurred completing a
    transaction
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1689)
    at flex.data.DataService.serviceTransactedMessage(DataService.java:1028)
    at flex.data.DataService.serviceMessage(DataService.java:528)
    at flex.messaging.AsyncMessageBroker.in(AsyncMessageBroker.java:414)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.filters.AsyncMessageFilterChain.in
    (AsyncMessageFilterChain.java:205)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.AsyncMessageBroker$EndpointSplitter.in(AsyncMessageBroker.java:809)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.endpoints.BaseSocketServerEndpoint.in
    (BaseSocketServerEndpoint.java:476)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.endpoints.RTMPConnection.handleTCCommandIn(RTMPConnection.java:886)
    at flex.messaging.endpoints.RTMPConnection.in(RTMPConnection.java:1032)
    at
    flex.messaging.endpoints.RTMPConnection.serviceTCMessage(RTMPConnection.java:1116)
    at flex.messaging.endpoints.RTMPConnection.doRead(RTMPConnection.java:654)
    at
    flex.messaging.endpoints.RTMPProtocolHandler.doRead(RTMPProtocolHandler.java:124)
    at
    flex.messaging.socketserver.Connection$ConnectionReader.run(Connection.java:874)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:680)
    Caused by: org.hibernate.TransactionException: JDBC commit failed
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:157)
    at
    flex.data.adapters.FlexHibernateSessionContext$SessionSynch.beforeCompletion(FlexHibernate SessionContext.java:139)
    at
    flex.data.DataServiceTransaction.notifyBeforeCompletion(DataServiceTransaction.java:2069)
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1673)
    ... 19 more
    Caused by: java.sql.SQLException: StandardXAConnectionHandle:commit:This
    connection is part of a global transaction
    at
    org.enhydra.jdbc.standard.StandardXAConnectionHandle.commit(StandardXAConnectionHandle.jav a:129)
    at
    org.hibernate.transaction.JDBCTransaction.commitAndResetAutoCommit(JDBCTransaction.java:16 6)
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:142)
    ... 22 more
    Error invoking service 'data-service':
    flex.data.DataServiceException: Error occurred completing a transaction
      incomingMessage: Flex Message (flex.data.messages.DataMessageExt)
        operation = transacted
        id = null
        clientId = 46CC4646-66D2-ED16-9DF7-9612C59D36F8
        correlationId =
        destination = MyDSApp.Product
        messageId = D97330F0-08FD-2866-FD1F-9612C82F2A21
        timestamp = 1329662712754
        timeToLive = 0
        body =
          Flex Message (flex.data.messages.DataMessage)
              operation = update
              id = ASObject(1206661731){productid=1}
              clientId = 46CC4646-66D2-ED16-9DF7-9612C59D36F8
              correlationId = D97330F0-08FD-2866-FD1F-9612C82F2A21
              destination = MyDSApp.Product
              messageId = B97F910A-239C-E7B5-A7B5-9612DBAEAD61
              timestamp = 1329662712766
              timeToLive = 0
              body =
                  price
                [Proxy(inst=MyDSApp.package1.Product@20) proxyClass=class
    flex.messaging.io.BeanProxy descriptor=[ excludes: null]],
                MyDSApp.package1.Product@20
              hdr(DSId) = 64813F88-6D96-4801-8435-C65442DF79C8
              hdr(DSEndpoint) = my-rtmp
        hdr(DSId) = 64813F88-6D96-4801-8435-C65442DF79C8
        hdr(DSEndpoint) = my-rtmp
      Exception: flex.data.DataServiceException: Error occurred completing a
    transaction
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1722)
    at flex.data.DataService.serviceTransactedMessage(DataService.java:1028)
    at flex.data.DataService.serviceMessage(DataService.java:528)
    at flex.messaging.AsyncMessageBroker.in(AsyncMessageBroker.java:414)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.filters.AsyncMessageFilterChain.in
    (AsyncMessageFilterChain.java:205)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.AsyncMessageBroker$EndpointSplitter.in(AsyncMessageBroker.java:809)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at flex.messaging.endpoints.BaseSocketServerEndpoint.in
    (BaseSocketServerEndpoint.java:476)
    at flex.messaging.MessageContext.doIn(MessageContext.java:295)
    at
    flex.messaging.endpoints.RTMPConnection.handleTCCommandIn(RTMPConnection.java:886)
    at flex.messaging.endpoints.RTMPConnection.in(RTMPConnection.java:1032)
    at
    flex.messaging.endpoints.RTMPConnection.serviceTCMessage(RTMPConnection.java:1116)
    at flex.messaging.endpoints.RTMPConnection.doRead(RTMPConnection.java:654)
    at
    flex.messaging.endpoints.RTMPProtocolHandler.doRead(RTMPProtocolHandler.java:124)
    at
    flex.messaging.socketserver.Connection$ConnectionReader.run(Connection.java:874)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
    at java.lang.Thread.run(Thread.java:680)
    Caused by: flex.data.DataServiceException: Error occurred completing a
    transaction
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1689)
    ... 19 more
    Caused by: org.hibernate.TransactionException: JDBC commit failed
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:157)
    at
    flex.data.adapters.FlexHibernateSessionContext$SessionSynch.beforeCompletion(FlexHibernate SessionContext.java:139)
    at
    flex.data.DataServiceTransaction.notifyBeforeCompletion(DataServiceTransaction.java:2069)
    at
    flex.data.DataServiceTransaction.complete(DataServiceTransaction.java:1673)
    ... 19 more
    Caused by: java.sql.SQLException: StandardXAConnectionHandle:commit:This
    connection is part of a global transaction
    at
    org.enhydra.jdbc.standard.StandardXAConnectionHandle.commit(StandardXAConnectionHandle.jav a:129)
    at
    org.hibernate.transaction.JDBCTransaction.commitAndResetAutoCommit(JDBCTransaction.java:16 6)
    at
    org.hibernate.transaction.JDBCTransaction.commit(JDBCTransaction.java:142)
    ... 22 more

Maybe you are looking for