Personal Administration problem

Hi
The savings plans screens are not showing up in SAP System automatically when inputting a new hire into the system. Can any body give sugesstions regarding this ?
Regards
Krishna

Hello Krishna,
You should maintain Infogroup properly.
In PA40 actions, on the first Infotype (Actions), you can check in Application Toolbar --> Change Infogroup.
This configuration can be done at V_T588D (and V_T588C).
For further information, refer to following URL:
[http://help.sap.com/saphelp_45b/helpdata/en/df/234b6e5733d1118b3f0060b03ca329/content.htm|http://help.sap.com/saphelp_45b/helpdata/en/df/234b6e5733d1118b3f0060b03ca329/content.htm]
Hope this helps.
Best Regards,
Biraju

Similar Messages

Personne Administration Problem

How will i change the Start date of the employee whose Payroll results are throwing Error
Payroll is run on 6/16
Emplyee hire date is 6/25
Employee hire date to be set at 6/16 prior How
Points rewarded

Hi
http://help.sap.com/saphelp_47x200/helpdata/en/48/35c5824abf11d18a0f0000e816ae6e/content.htm

WRV210 web administration problem

I have a Wireless G VPN Router with Range booster, it was configured for a classroom by someone who left the company, and now i have to recover administration without resetting configuration or flashing the firmware. This because i need to configure 200 more devices with the same problem.
All i want is to see the web page of this device properly.
Belive me i have tried every option Internet Explorer 7 on windows 7, Internet Explorer from Windows XP, Firefox 6, Google-Chroome.
All with the last version of Java Runtime Environment, the resulting page is always the same.

I tried accesing with the cd, and magicly the web page worked fine once more
and then back to the broken page.
At least i got to recover the web access once.
2011/8/28 gstefanick
Cisco Support Community Re: WRV210 web administration problem created by George
Stefanick in *Getting
Started with Wireless* - View the full discussion

Apache/Personal Websharing Problems

Hello, I have done extensive research on these discussions but have not found a solution to my problem.
I have a g4 powerbook running 10.4.10.
I can not get Personal Web Sharing to operate. I check the box but it never runs.
In terminal I get the following:
Last login: Wed Aug 8 16:44:33 on ttyp1
Welcome to Darwin!
Powerbook4:~ cjgunther$ apachectl start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/cjgunther.conf
Processing config file: /private/etc/httpd/users/netpublish.conf
fopen: Permission denied
httpd: could not open error log file /private/var/log/httpd/error_log.
/usr/sbin/apachectl start: httpd could not be started
Powerbook4:~ cjgunther$
(The netpublish is a server application I run on this machine)
Is this a permissions problem? I have tried repairing permissions several times.
In addition, now the machine no longer shuts down either. ugh.
If someone knows what is wrong and can help, I would be indebted.
Thanks,
cj

I can do without the Portfolio server for now if you can help me get the apache server running again.
OK, open the Terminal application. We need to move some files around. The first thing is to back up your current Apache config file:
<pre class="command">sudo cp /etc/httpd/httpd.conf /etc/httpd/httpd.conf.20070808-bak</pre>
You'll need to give your administrator password for that command. Next, let's substitute the spare "default" Apache config file:
<pre class="command">sudo cp /etc/httpd/httpd.conf.default /etc/httpd/httpd.conf</pre>
Now, the last thing in the default config file is to include files in the /etc/httpd/users directory if their names end with "conf":
<pre class="command">Include /private/etc/httpd/users/*.conf</pre>
So, we need to hide the netpublish.conf file from Apache:
<pre class="command">sudo mv /etc/httpd/users/netpublish.conf /etc/httpd/users/netpublish.hidden</pre>
Note that it's not really hidden, Apache just won't see it.
Now, open the Console application from your utilities folder and navigate through the logs on the left hand side until you find /var/log/httpd/error_log and /var/log/httpd/access_log. Open the System Preferences and try starting Personal Web Sharing. If it starts up properly, you should see these two lines appear at the end of the log:
<pre class="command">[Wed Aug 1 10:11:08 2007] [notice] Apache/1.3.33 (Darwin) PHP/5.2.0 mod_perl/1.29 configured -- resuming normal operations
[Wed Aug 1 10:11:08 2007] [notice] Accept mutex: flock (Default: flock)</pre>
If you don't, post back with the errors you see.
charlie

Am I the only person having problems with Verizon's refurbished Androids?

The best way for me to share my issue, is to submit a copy of a letter I have written to Verizon.
I have been a loyal Verizon customer for many years now. I have enjoyed good service until my most recent phone purchase approximately 18 months ago. I purchased an HTC Android, which did not work properly. It was immediately replaced with a refurbished phone from the manufacturer, which also did not work properly. That phone was replaced with another refurbished phone form the manufacturer that did not work properly, but after being given NO OPTIONS, I learned that I would have to live with a partially functional phone. For approximately a year I learned to live with the fact that my date/time stamp would disappear, that sometimes my phone ringer would not work, that I would never get an alert sound when a text message arrived. The worst part of this phone is that periodically it would dump/erase all my text messages. Since Verizon could not solve the problem and since Verizon blamed the manufacturer, I had no options, had no choices. Part of being with Verizon and my crappy phone was forced upon me with a 2 year contract. I would only have to be miserable for one more year. Then one day my phone erased some very important text messages. At this point, I had already spent hours and hours and hours with your tech support, and I decided I needed to try and force a solution. While talking with one of your tech people, I learned that the last phone I had been sent was sent to me with Beta software. The software was so outdated that the phone was not updating itself. In fact we could not update the phone manually. So, the tech person put me into yet another HTC. That HTC did have up to date software, but I was still having problems texting, date disappearing and other glitchy things. So, then the next tech person put me into a Motorola. Leary of droids, I asked for an Iphone but was refused. The tech person told me that I could use my HTC charger for the Motorola, and that he would not be sending me a Motorola charger for the phone. I understood.
So, I’ve been very patient throughout this. I figured I just had a few more months to get through this misery, wait for my contract to expire, get the Iphone. Well, I had not idea that the WORST WAS YET TO COME! So, the Motorola doesn’t charge. I tried charging that phone for 3 days, and nothing. So, back on the phone with your tech support. By the way, whomever reads this letter, I hope that someday you have to go through the tedious phone trees that I had to, only to get to Tech Level 1 which pre-screens, then you have to explain your story ALL OVER AGAIN to level 2 tech support. Of course, I now realize that Verizon thinks that I have hours and hours of time, that it is more important for me to burn 2-3 hours of my time to save Verizon 10 minutes of their time. I now realize just what a low opinion the company has of its “clients.” I actually can’t refer to myself as a client anymore; I think I am one of Verizon’s chumps.
So, back on the phone, more misery, more trips to the post office. This tech person could not believe that the new Motorola was not charging, and when I asked her if I could just get an Iphone, she said, “If you are returning a functional phone with the idea that you will get an Iphone, we will charge your for the returned phone. They will test the phone when it arrives, and if there isn’t anything wrong with it, we will charge you.” WOW. So, not only have I not had a phone that works properly, but I have wasted hours of my valuable time on the phone and running to the post office returning phones, but now I am being threatened by your employee who was implying that I am a liar. BUT WAIT, IT GETS WORSE!   So, she sends me another Motorola, and this phone wouldn’t take a charge either. DO YOU THINK SHE SHOULD HAVE SENT ME A MOTOROLA CHARGER INSTEAD OF MAKING ME USE MY HTC CHARGER?! How much money did you save here, $3 for a charger? So the new phone doesn’t charge, and of course now I am back on the phone tree with your tech support. BUT WAIT, IT GETS WORSE! CAN YOU BELIEVE THAT THE WORST IS YET TO COME?
So now I’m very angry. At some point, after a company FAILS you over and over, at some point you have to take matters into your own hands. I figured I am at that point. I ask again for a Iphone, and they say No. At this point I figure I may have to file a small claims against Verizon or pay off my contract, something dramatic, something that will solve the problem. I am now writing down employee names etc. This all went down last Friday, August 24th. I talked with Deshanee. Deshanee determines that the problem is the charger, but I explain to her that I have been reassured by two other tech people that my HTC charger is fine. I told her I was leaving town and needed this resolved. She said that I needed to go to a corporate Verizon store, and there she would arrange for a manager to give me a charger and charge the phone. Really!   So during rush hour traffic on a Friday, I get to run to a Verizon store and test something that might not work!!!!! Whomever reads this letter (if it every gets read), I hope that someday you have to go through this hell, frantic, running around, not knowing if I will have this resolved before my trip, and the HUMILIATION of having to do a tremendous amount of footwork, wasted time, wasted hours. You people must really despise your client/chumps to put us through this misery and HELL! I told her that that was unacceptable that I wanted to talk to a supervisor. If I go to a Verizon store during rush hour traffic on a Friday, going on my SIXTH REPLACEMENT PHONE ISSUE, I wanted to know the problem was going to be resolved. I am not a lab rat to be sent around town for an experiment. I asked her to get a supervisor and have him authorize me an Iphone. Deshannee reluctantly consulted with a man by the name of Chad (she refused to give me his last name), and he said, “No.”   He did not have any other solution for me other than to run to the Verizon store and test out a new charger. I had visions of me sitting in a Verizon store for 2 hours waiting to see if a phone would charge. At this point I am HATING VERIZON. You have no idea the depth of my anger and resentment towards your company. I wanted to personally talk to Chad, and since it looked like I would have no other choice than to follow my orders from Verizon, I started my way to the Verizon store. By the way, there is a Sprint store within two blocks of that corporate, Verizon store.
So Chad is not available but Denshanee connects me with a very nice supervisor by the name of Mary. Both Denshanne and Mary were courteous and professional, and I do not blame them for anything. I BLAME VERIZON for not giving them any customer service tools to work with. After all I have been through, figure out a way to resolve the problem once and for all. I had to come up with the idea terminating my contract, paying the $200 penalty, Verizon crediting me back the $200, and then I would BUY the ****** IPHONE! I suggested this to Mary, and she said that only the Customer Loyalty Dept could authorize that. So, after being on hold for quite a while, she came back to me to tell me that the Customer Loyalty Department would not authorize it. I was left on my own. Since the Corporate Verizon store would not give me a charger for my phone, I had to buy one. They sold me a Verizon, Universal Wall Charger. More to come on this later. Turns out EVEN THIS ISN’T RIGHT! They should have sold me a Motorola charger. It has taken me weeks to figure out why I can’t transfer data!!!!   So, I have spent hours on the phone with Verizon tech support to try and figure out why this ****** phone won’t transfer data. Verizon tech support was NO HELP. THEY DON’T KNOW. So, I had to call Motorola tech support to find out that Verizon’s Universal Wall Chargers are not used for data transfer. If you people were actually trying to drive me crazy, intentionally, I would be afraid for my life. If this is your level of competence when you are trying?
I went on my trip and of course, when I arrived in Europe, my phone did not work. I had to get on your tech support again, and it took 2 hours to trouble shoot the problem. Even though I had called several times to ensure my phone was international ready, to make sure I had a calling plan and a data plan, no one bothered to fill my requests. I believe I should record every phone call to Verizon, document everything. So, even after I got on a data plan, I received alerts that I was mounting over $1,000 in data roaming charges. I had to call Verizon several times from Europe to remedy this. You people just love making things hard. I hate Verizon.
So, my new Motorola does not transfer data to my computer, for a reason I am not sure of, but Motorola claims I have the wrong USB cord. I requested a car charger and was denied that today by your tech support person, Vondra. She said that Verizon only warrants phones, and that we have to buy the chargers and such. Yeah, of course Verizon doesn’t; that would cost you $3? So, I called the Verizon corporate store on La Cienega, the store that refused to give me a charger, that made me buy one (one of your tech people did credit me back for that BTW). I spoke with the manager, Vanessa. She said that they don’t carry Motorola chargers. They sell the phones, but not the chargers. I explained to her about the data transfer problem I was having, and she suggested I buy a memory card reader. GREAT. So, Verizon’s solution is to abandon the idea of having the proper equipment, piece meal a solution and yes, make me pay for it!
So, another item, which your tech support cannot solve, is that the phone does not work while it is being charged.   So, I called tech support again, asked to speak with a Supervisor. I was put on hold for a long time, and the tech support person came back and told me that there were no supervisors available and that one would have to call me back. I asked her the name of the supervisor that is supposed to call me back, and she said, “Alvin.”
So, a day has gone by and no call from Alvin. I doubt he will call. Your company is obviously going through some rough times. I am sure that within a few months, Verizon’s incompetence and failings will start to be reflected in your ratings
I have visited the Sprint store, and I am familiarizing myself with what they have to offer. Early next year my contract expires, and most likely I will leave Verizon. I should take you to small claims court! Most of all, I so much regret all the people I referred to you, dozens. I talked up your network, I told everyone how happy I was with the service. I was your advocate. No longer, and I am not putting the same effort into letting people know how horrific Verizon has been with me during these last 18 months. I am counting the months until my contract expires. I will limp along with this broken phone until my contract expires, just has I have done with all the other defective phones Verizon has provided me with. For a year my HTC phone ran on the first generation software, and I managed to just use it as phone, nothing much more, and that’s what I’ll have to do with this ****** piece of crap.

I believe you, Ihave been a subscriber for over 8 years and over that period of time I have has some phones fail. This I can accept and understand, however the policy of Verizon of only sending out recertified phones is a joke. I have had over 10 replacement phones sent out to me an none have actually lasted more that 1 month. Last year this went on and on, I was able to fix this by upgrading to the samsung stratosphere.   My son's Pantech phone failed and was replaced several times and to resolve this, I ended up purchasing a replacement from Amazon.
My worked fine at first, then the internet started to get really buggy and hard almost impossible to connect. I was very hesitant to have them send a replacement because of my experience with the replacement phones, however I had to concede because I could not connect to the Internet. I was assured that the replacement would undergo a 100++ point check. It arrived and I was happy with it, however a week later, it stopped charging. I spoke with a supervisor and the options he had for me was 1. keep going thru the warranty replacement process, 2 they will send me a downgraded phone (a 3G, unlike the 4G that I bought) or 3. they will buy it back for ... wait for it...$68. Another supervisor told me then they will have to keep sending out phones, every week if needed.
As expected the replacement phone failed again, and out of frustration I called again and they connected me to a manager immediately (my account is flagged because I filed a complaint with the BBB. And for once I got a helpful person, he told me they could not ship a new phone, but a different brand, the Motorola Droid 4, I said I want to keep the Stratosphere because of the car dock and desk dock, he said they would give me new docks as well. This seemed like a good deal, so I accepted. The Droid arrived and I was setting it up, transferred the sim, the 32 GB SD card, contacts and all. I noticed that the sim was not registering, it showed no data, I tried to remove it and it BURNED my hand, needless to say it fried my SD card with all the data, photos, etc....
When I was using a basic phone, this was not a big problem, just move your contacts and you are done. With smart phones this is a lot harder, you have to load all the apps and settings again. My stand is that I am paying $200++ a month for decent service... not even perfect, just decent. I get defective phones and Verizon is not willing to rectify this. I spoke with someone from the executive office of verizon and basically her answer was to keep replacing the phones until one works,, buy an new one at full retail price or get it from a third party like Amazon or Ebay....or...get this since I am 5 months away from my upgrade date, they will LET me do an early upgrade to any non apple product, but PAY an early upgrade penalty.
Right now I think that I will use one of my phones, BUT I will aside from the complaint with the BBB, I am filing a complaint with the FTC. I wrote this on the forums a few weeks ago, but of course no one from Verizon will have the B@ll$ to answer this.
Message was edited by: alexander ruiz

IWeb hanging at logging into MobileMe (Personal Domain Problem)

I've searched and searched for an answer to my problem all over the internet and these forums and keep coming up blank.
Apologies if the answer is somewhere and I've missed it.
It could be a wider problem with my MobileMe, but iWeb is where it first occurred.
I recently had my personal website forwarding to my MobileMe site, and was using the MobileMe webspace to host my site. I had set my personal domain (in MobileMe) to the personal website. Why I did this I'm not sure, as I wasn't actually using the external webspace, merely forwarding it to my MobileMe site.
However I then decided I wanted to create a new site and this is where the problems began to occur. When I tried to publish the new site, it seemingly tried to publish to personaldomain/new_website name/ which obviously didn't exist as there was no external webspace there.
I then decided to reset everything, get rid of the personal domain setting within MobileMe and just merely forward my external web addresses to my Me sites. Upon deleting my Personal Domain from the mobileme settings page and logging into iWeb, the website name next to my username was still my external website address, and iWeb seemed to think it was all still published (which it was, as when I went to my web.me.com/etc, my website was there) However I wanted to start from scratch and republish everything, so I deleted all the web/sites section from my idisk, and hoped I could republish everything (this could have been a mistake!)
Now when I try to publish, iWeb just hangs at logging into MobileMe and won't publish anything. iPhoto also won't upload new photo albums and neither will aperture. They just hang at syncing galleries.
I'm completely at a loss as to how to proceed. I've deleted preferences from iweb and also logged out of mobileme, put a fake name in and logged back in again (to clear the cache I think) and still iweb hangs. I've even tried creating a new user account and logging in there and still it hangs.
Apologies for the essay of a post, if anyone can help it would be greatly appreciated. Just some suggestions as to where to go would be helpful. I'm wondering if it's something to do with Keychains? I had a brief look in there but it all went over my head. This is the first problem I've ever had with my new mac, and being from a PC background, don't really know where to look to fix things.
Thanks in advance to people who even get through reading the entire post!

If stephen's suggestion doesn't help you might consider the following:
Source: http://www.macintouch.com/readerreports/mobileme/index.html#d30jul2008
Page Title: MobileMe
Date: Wednesday, July 30, 2008 9:06:25 AM
Jim Oase
After waiting a day for the rolling restore to happen, I called AppleCare because Apple had sent an email saying my service was back, and it wasn't. I still could send and not receive using Mail.
Here is what fixed it. Go to MobileMe (terrible name) in System Preferences, log out. Then enter a garbage name and password and try to log in. This apparently clears the MobileMe preferences. Then enter your real UserName and PassWord. For me this was lights on.
I am left wondering how long ago I could have had email had I known this preference reset scheme.
Although for a different MMe issue it will clear out the MMe login info so you can enter everything anew and give it a fresh start.
OT

Problem in PGP signature of a mirror - an administrative problem

i know this is an administrative affair and i am not the administrator of our network.
i asked our network administrator to launch a mirror of arch in our university and he kindly did it and it is know listed in arch mirror list. the problem is that when i update the package list it gives me error regarding PGP signature and i can not update or install package. when i update the database using another mirror, it works fine and even i can update the packages using our mirror. so the problem is only the PGP signature of our mirror.
since our admin does not work with arch, i decided to ask it here and pass him the solution.
the address of our mirror is : http://mirror.yazd.ac.ir/arch/
and here is the output of pacman -Syyu
[root@civil-cfd ~]# pacman -Syyu
error: GPGME error: No data
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
core 108.9 KiB 111K/s 00:01 [######################] 100%
error: GPGME error: No data
error: failed to update core (invalid or corrupted database (PGP signature))
extra 1482.3 KiB 138K/s 00:11 [######################] 100%
error: GPGME error: No data
error: failed to update extra (invalid or corrupted database (PGP signature))
community 2.1 MiB 139K/s 00:16 [######################] 100%
error: GPGME error: No data
error: failed to update community (invalid or corrupted database (PGP signature))
archlinuxfr 12.2 KiB 197K/s 00:00 [######################] 100%
error: database 'core' is not valid (invalid or corrupted database (PGP signature))
error: database 'extra' is not valid (invalid or corrupted database (PGP signature))
error: database 'community' is not valid (invalid or corrupted database (PGP signature))

Allan,
i did not change the options in pacman.conf file. and note that when i disable this mirror in "/etc/pacman.d/mirrorlist" and use other mirror, the commands work well. so the problem is related to this mirror.
ewaller,
it is a pure Arch installation not Antergos or any other branch of Arch.
Last edited by hadian (2014-04-06 07:55:29)

Personal number problem in the Custom HCM Process

We developed custom ESS-MSS application using Webdynpro ABAP and SAP HCM is backend for employees,Managers and HR data.
User A has custom ess role and standard ess(Webdynpro java ESS-MSS business package)
First time in the Custom ess role Employee(User A) try to change the personal information it is giving error
"Process Zxxx only useful if personnel number is specified"
If the Same Employee(User A) clicks the Standard ESS role and Come back to the custom ESS role and try to change the Employee
information the HCM process is working
After Clicking Std ESS role and Come back to the Custom ESS role the error does not exist.
else,
"Process Zxxx only useful if personnel number is specified" .
how the pernr details of the employee is getting populated to memory variable ESS01
Can you please help me how to solve the problem.

Hi,
Thanks for your reply
We have mapped the user for the employee at PA30 trans through communication info 105 and sub 0001
The iview, does not give any error
if we execute
1.Standard Employee self service
2.then running our custom role and hence custom iview
In the appintegrated iview, we are calling asr_process_execute (WD ABAP standard application) with the parameter
Process=Zxxx&GET_PERNR=X&PERNR_MEM_ID=ESS01
We found thatthere was an entry for this user at table "indx" when we execute Standard Employee self service.
Also,
If the table "INDX" has an entry for the user, then our custom iview runs with out any error, since the value for the
MEMID= ESS01 exists.
Apart from mapping the user through comm info type 105, what we shoud do to have an entry for this user at table "INDX"
Please give suggestion
please help me
Thanks

Dreamweaver & Contribute Administration Problem

I've got an odd scenario for a client site that I
inherited after several other developers were involved over the
past 2 years... I fear that the one who created the Contribute
Administration interface is the one where there are some other
legal problems involved, and there is no relationship left. If I
contacted them, they would not cooperate. Sad but true.
What I want to do is remove the previous Contribute linkage
and then reinstall a new Contribute site administration that I can
drive henceforth. I use Dreamweaver MX 2004 (still) and have no
problem at all in accessing a client site via FTP, but the second
problem is that I don't actually have total access to the hosting
server panel as usually is the case. So, if this is going to
involve deleting specific files, I'll need to know what to look for
(if it's within my view) or what to direct the hosting contractor
to find & delete.
I presently update all content on the existing site design,
but that's not very efficient and it's expensive at my rates for me
to doing the day-to-day content update that the client could easily
manage themselves via Contribute. Every time I first access the
server via Dreamweaver FTP to upload new files, I'm prompted about
enabling Contribute connectivity. I have Contribute, but don't have
this client's Contribute Administration keys or details. Those are
forever lost, I'm afraid.
I've recently redesigned the site, and it would be ideal to
enable my client to use Contribute. However, I'm caught in a loop
since there is no way to access the orignal Contribute site keys.
How can I find and remove the existing Contribute Administration,
then reinstall Contribute with new Contribute Administration of the
site? If I try to administer the site via Dreamweaver (Manage Site
- Contribute tab), once it checks through the cache, I get an error
that says "Could not find a page at the specified site root URL.
Please check the site root URL." I'm wondering if the previous
developer may have actually deleted something just to be nasty...
they were pretty vile and unprofessional about a lot of things.
This is far from the typical scenario I'm used to where I
always have total control over the hosting environment, too.
However, relative to an e-commerce component of their site, when
I've had issues and knew what to ask for, the site hosts have been
pretty responsive. I might be able to ask for specific files to be
removed if I could only know what to direct them to do.
Any ideas? Many thanks.

> open up a third-party FTP client and log into the remote
server.
> Look for a folder named _mm that contains a file named
contribute.xml
>
> delete that file and folder.
Alternative:
download the contribute.xml file and open it in a text
editor.
There is a way to reset the contribute Admin password if you
get this far
and want to leave the setup as-is but don't know the
password.
i can google for the answer i've given in the past, short
version of what i
remember, look in the .xml file for
password="randomcharacters" and change
it to password="" meaning password has no contents.
upload the contribute.xml file to same location on the remote
server.
then login using contribute admin, and when prompted for
password don't type
anything, just hit enter key. Then reset the password.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Remove Personal Domain Problem

Hi. I had a personal domain setup and it was working fine. I recently removed the domain from my .Mac account. iWeb still thinks it is publishing to the domain, and shows the little green indicator light at the bottom with my domain. After it publishes, the Visit Site button tries to load up with my domain and not with the .mac address.
How can I get it to revert to the .mac address mode?

I'm pretty good on computers but my dad asked him to help him with a Mac problem so here I am...
Our good friend has built our website from his computer at his house, me and my dad need to be able to edit the website using iWeb (the same program our friend uses) so we can make appropriate changes...
We can log into the .Mac the same one that our friend uses but we can't figure out how to actually "load" the work our friend has already done so we can add to it and edit it...
Any advice is appreciated

Personal Domain problem.

I am unable to reverse (cancel, annul, stop, call off, scratch, scrub) the link that has somehow or other been created between Mobile Me and a domain, hosted by GoDaddy, that I own but never use.
So, when I update my iWeb pages and 'publish changes' and then visit my site I find myself on the GoDaddy site.
I admit that I recently discovered that it was possible to have a Mobile Me site forwarded and I even looked at the page in GoGdaddy where it was possible to change the CNAME. however, I did not complete the process.
I have spoken to customer support at GoDaddy, who have been very accommodating, and they assure me that they have cleared any links, but the problem persists.
What next?
Any clues, anyone?
Cordially,
David Amies

Of course there is!
Log into your MobileMe account under System Preferences and then go to the Personal preferences section. Under there you will find on the left hand side, Personal Domain Settings. Click on this and where your personal domain name is entered, there will also be a delete button on the right hand side. Click on delete and your domain is removed.

Netctl and WPA2 Personal AES, problem with authentication

I having trouble to connect to my WPA2 Personal 5ghz wireless AES (only) network using netctl. When I were using wicd it wasnt any problems. I assume there is something wrong in my profile but i cant find out what.
My config /etc/netctl/wlp4s0-limbo2
Description='A wireless connection using a custom network block configuration'
Interface=wlp4s0
Connection=wireless
Security=wpa-configsection
IP=dhcp
WPAConfigSection=(
'ssid="limbo"'
'key_mgmt=WPA-PSK'
'proto=RSN'
'pairwise=CCMP'
'group=CCMP'
'psk="key"'
and this is the output from journalctl -xn
Error was encountered while opening journal files: No data available
-- Logs begin at Mon 2001-01-01 01:02:40 CET, end at Fri 2013-06-14 13:45:30 CEST. --
Jun 14 13:45:14 thallarch sudo[18463]: thall : TTY=pts/3 ; PWD=/home/thall ; USER=root ; COMMAND=/usr/bin/netctl start wlp4s0-limbo2
Jun 14 13:45:14 thallarch sudo[18463]: pam_unix(sudo:session): session opened for user root by (uid=0)
Jun 14 13:45:14 thallarch systemd[1]: Starting Networking for netctl profile wlp4s0-limbo2...
-- Subject: Unit netctl@wlp4s0\x2dlimbo2.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit netctl@wlp4s0\x2dlimbo2.service has begun starting up.
Jun 14 13:45:14 thallarch network[18470]: Starting network profile 'wlp4s0-limbo2'...
Jun 14 13:45:30 thallarch network[18470]: WPA association/authentication failed for interface 'wlp4s0'
Jun 14 13:45:30 thallarch network[18470]: Failed to bring the network up for profile 'wlp4s0-limbo2'
Jun 14 13:45:30 thallarch systemd[1]: netctl@wlp4s0\x2dlimbo2.service: main process exited, code=exited, status=1/FAILURE
Jun 14 13:45:30 thallarch systemd[1]: Failed to start Networking for netctl profile wlp4s0-limbo2.
-- Subject: Unit netctl@wlp4s0\x2dlimbo2.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
-- Unit netctl@wlp4s0\x2dlimbo2.service has failed.
-- The result is failed.
Jun 14 13:45:30 thallarch systemd[1]: Unit netctl@wlp4s0\x2dlimbo2.service entered failed state.
Jun 14 13:45:30 thallarch sudo[18463]: pam_unix(sudo:session): session closed for user root
I have tried both with the obfuscated password using wpa_passphrase and the one in clear text.
I should also mention that i have no problem connecting to my WPA2 Personal 2.4ghz wireless TKIP (only) network.

Okey, I think Im on something here:
wpa_supplicant config
ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel # allow control for members in the 'wheel' group
update_config=1
ap_scan=1
network={
ssid="limbo"
bssid=20:4E:7F:71:D0:04
#psk="hidden"
psk=8f3f...
This is the output from $> wpa_supplicant -B -D nl80211 -i wlp4s0 -c /etc/wpa_supplicant/limbo.conf -dd -f /tmp/dump_wpa_supplicant
wpa_supplicant v2.0
Successfully initialized wpa_supplicant
Initializing interface 'wlp4s0' conf '/etc/wpa_supplicant/limbo.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/limbo.conf' -> '/etc/wpa_supplicant/limbo.conf'
Reading configuration file '/etc/wpa_supplicant/limbo.conf'
ctrl_interface='DIR=/run/wpa_supplicant GROUP=wheel'
update_config=1
ap_scan=1
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=5):
6c 69 6d 62 6f limbo
BSSID - hexdump(len=6): 20 4e 7f 71 d0 04
PSK - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='limbo'
nl80211: interface wlp4s0 in phy phy0
rfkill: initial event: idx=1 type=2 op=0 soft=0 hard=0
rfkill: initial event: idx=2 type=1 op=0 soft=0 hard=0
nl80211: Set mode ifindex 4 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x16d5a00
nl80211: Register frame type=0xd0 nl_handle=0x16d5a00
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame command failed (type=208): ret=-95 (Operation not supported)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Failed to register Action frame processing - ignore for now
netlink: Operstate: linkmode=1, operstate=5
nl80211: driver param='(null)'
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz
nl80211: 2457-2482 @ 40 MHz
nl80211: 2474-2494 @ 20 MHz
nl80211: 5170-5250 @ 40 MHz
nl80211: 5735-5835 @ 40 MHz
nl80211: 57240-63720 @ 2160 MHz
nl80211: Added 802.11b mode based on 802.11g information
wlp4s0: Own MAC address: 00:26:08:dc:85:72
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_nl80211_set_key: ifindex=4 alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
wlp4s0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlp4s0: Setting scan request: 0 sec 100000 usec
WPS: Set UUID for interface wlp4s0
WPS: UUID based on MAC address - hexdump(len=16): 58 5f f7 31 b2 76 5d 30 bc 67 4d c1 25 d8 31 33
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: Supplicant port status: Unauthorized
EAPOL: Supplicant port status: Unauthorized
ctrl_interface_group=10 (from group name 'wheel')
wlp4s0: Added interface wlp4s0
wlp4s0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
Daemonize..
RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlp4s0' added
nl80211: if_removed already cleared - ignore event
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlp4s0' added
nl80211: if_removed already cleared - ignore event
wlp4s0: State: DISCONNECTED -> SCANNING
wlp4s0: Starting AP scan for wildcard SSID
nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Scan trigger
EAPOL: disable timer tick
EAPOL: Supplicant port status: Unauthorized
RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlp4s0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: New scan results available
wlp4s0: Event SCAN_RESULTS (3) received
nl80211: Received scan results (21 BSSes)
wlp4s0: BSS: Start scan result update 1
wlp4s0: BSS: Add new id 0 BSSID 20:4e:7f:71:d0:02 SSID 'GET_OFF_MY_LAN'
wlp4s0: BSS: Add new id 1 BSSID 00:1f:33:fa:68:01 SSID 'NETGEAR'
wlp4s0: BSS: Add new id 2 BSSID 20:4e:7f:71:d0:04 SSID 'limbo'
wlp4s0: BSS: Add new id 3 BSSID 74:44:01:72:6f:fa SSID 'ohyran'
wlp4s0: BSS: Add new id 4 BSSID b8:a3:86:a4:6f:c2 SSID 'Kjansson'
wlp4s0: BSS: Add new id 5 BSSID 00:19:5b:00:f9:41 SSID 'Routary'
wlp4s0: BSS: Add new id 6 BSSID 34:21:09:02:61:88 SSID 'AirLink29150'
wlp4s0: BSS: Add new id 7 BSSID 14:d6:4d:cd:56:ac SSID 'dlink'
wlp4s0: BSS: Add new id 8 BSSID 00:1f:33:28:86:2a SSID 'NETGEAR-2.4-G'
wlp4s0: BSS: Add new id 9 BSSID 00:27:19:80:ee:6c SSID 'PP-LINK'
wlp4s0: BSS: Add new id 10 BSSID 00:24:b2:59:5d:af SSID 'Sofia-dator-Wireless'
wlp4s0: BSS: Add new id 11 BSSID 00:24:fe:00:83:47 SSID 'schrem'
wlp4s0: BSS: Add new id 12 BSSID 00:24:01:8f:e5:1e SSID '504'
wlp4s0: BSS: Add new id 13 BSSID 08:76:ff:83:42:94 SSID 'TeliaGateway08-76-FF-83-42-94'
wlp4s0: BSS: Add new id 14 BSSID 58:98:35:7f:08:7d SSID 'Bettan'
wlp4s0: BSS: Add new id 15 BSSID 58:98:35:bb:3b:57 SSID 'TeliaGateway58-98-35-BB-3B-57'
wlp4s0: BSS: Add new id 16 BSSID 00:1f:33:fa:70:03 SSID 'Skatteverket'
wlp4s0: BSS: Add new id 17 BSSID 84:1b:5e:da:0a:4a SSID 'NETGEAR14'
wlp4s0: BSS: Add new id 18 BSSID 4c:60:de:74:05:20 SSID '3Bredband0520'
wlp4s0: BSS: Add new id 19 BSSID 00:26:44:99:57:0f SSID 'TeliaGateway00-26-44-99-57-0F'
wlp4s0: BSS: Add new id 20 BSSID 00:18:4d:8a:cc:66 SSID 'router'
BSS: last_scan_res_used=21/32 last_scan_full=0
wlp4s0: New scan results available
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP 00:1f:33:fa:68:01 type 0 added
WPS: Unknown Vendor Extension (Vendor ID 9442)
WPS: AP 74:44:01:72:6f:fa type 0 added
WPS: AP b8:a3:86:a4:6f:c2 type 0 added
WPS: AP 34:21:09:02:61:88 type 0 added
WPS: AP 14:d6:4d:cd:56:ac type 0 added
WPS: AP 00:1f:33:28:86:2a type 0 added
WPS: AP 00:24:b2:59:5d:af type 0 added
WPS: AP 00:24:fe:00:83:47 type 0 added
WPS: AP 00:1f:33:fa:70:03 type 0 added
WPS: AP 84:1b:5e:da:0a:4a type 0 added
WPS: AP 4c:60:de:74:05:20 type 0 added
WPS: AP[0] 00:1f:33:fa:68:01 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[1] 74:44:01:72:6f:fa type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[2] b8:a3:86:a4:6f:c2 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[3] 34:21:09:02:61:88 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[4] 14:d6:4d:cd:56:ac type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[5] 00:1f:33:28:86:2a type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[6] 00:24:b2:59:5d:af type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[7] 00:24:fe:00:83:47 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[8] 00:1f:33:fa:70:03 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[9] 84:1b:5e:da:0a:4a type=0 tries=0 last_attempt=-1 sec ago blacklist=0
WPS: AP[10] 4c:60:de:74:05:20 type=0 tries=0 last_attempt=-1 sec ago blacklist=0
wlp4s0: Selecting BSS from priority group 0
wlp4s0: 0: 20:4e:7f:71:d0:02 ssid='GET_OFF_MY_LAN' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-29
wlp4s0: skip - SSID mismatch
wlp4s0: 1: 00:1f:33:fa:68:01 ssid='NETGEAR' wpa_ie_len=0 rsn_ie_len=20 caps=0x531 level=-29 wps
wlp4s0: skip - SSID mismatch
wlp4s0: 2: 20:4e:7f:71:d0:04 ssid='limbo' wpa_ie_len=0 rsn_ie_len=24 caps=0x11 level=-37
wlp4s0: selected based on RSN IE
wlp4s0: hardware does not support HT PHY
wlp4s0: skip - rate sets do not match
limbo is the network i try to connect to, but it says it doesnt support HT PHY which has to do with 5GHz network? So it seems like it not using the correct drivers? The broadcom-wl drivers are installed and loaded into the kernel.
wpa_supplincant only shows me three available drivers: wext, nl80211, wired. Shouldnt it be possible to select the broadcom drivers?

Contact Person Replication Problem - Updating could not be completed

Dear Experts,
I'm facing the problem when replicating contact person from CRM to R/3. It only happen when changing the bp/contact person that paired (with contact person relation type) to more than 5 customer/bp and it always error when replicating to R/3.
If I trace the probelm in SMW01, the error message appreared is : Updating could not be completed. I'am affraid the workload in R/3 system is to high or the time that given for processing the BDOCS is too short.
Is there any configuration to set the time for processing the BDOCS from CRM?
Or is there any solution to solve this issue?
Please helps
Many thanks in advance.
Regards
eddhie k

Hi,
I am facing same problem, have u got the solution for this problem?
Thanks,
Harshal

Content Administrator Problem

I am trying to enter to the Content Administrator and after I put the login data and click in Login button I get the following message:
503 Service Unavailable
Dispatcher running, but no server connected!
Details: No details available
What can be the problem?

Hi Ruben,
The server is not started. Check the "SAP management console" for all the nodes to become GREEN color and then try.
If you check the "Process Table" all the 3 services (dispatcher, server0 and SDM) should be running and in GREEN color.
Regards,
Santhosh.C

Administrator problems with moving itunes

New Mac user and I'm having problems moving my itunes account from my PC to my Mac Book Pro... Using TuneSwift to transfer the account, but when I click the button to transfer, it keeps giving me an error message saying that I need administrator approval to transfer this file.... I'm not sure what they're talking about... I have a feeling it's in the Security files that I have set on my PC, but not really sure where to find it on my Sony Vio PC... This is probably an easy fix and by the question I'm sure it wasn't hard to figure out that I'm not a computer whizzz by any means... Any help would be appriciated... Thanks Sterbs

Right click TuneSwift and Run As Administrator

Personal Administration problem

Similar Messages

Maybe you are looking for