Personas: How set the default screen size when Personas starts up

Hi Personas experts,
When Personas starts, its screen size is by default small, say, size_A. One can press "+" to increase the screen size, say, size_B.
Now I want Personas to start with a bigger screen size, say, size_B instead of the default size, size_A. Does anyone know how to do this? Thanks.
Br,
Dong

Hi Dong,
There is a minor tweak you have to do in your index.html file. Or I advise you copy the index.html file into a new file and run personas using it.
The tweak in the 40th line where you have the script. Just add          switchPersonasObjectFullScreen();
  <script type="text/javascript">
         setPersonasObjectSize(1);
         switchPersonasObjectFullScreen();        <!-- Add this here -->
         trySetPersonasObjectSizeFromUrlParameters();
       disableBrowserHelp();
     </script>
     </body>
Save . Activate and Run Personas using this file. It will open personas in Full Screen Mode within the browser window.
I hope this tweak helps.
Regards,
Manu

Similar Messages

  • How do I set the default window size when I open a Numbers 3.0 document

    How do I set the default window size when I open a Numbers 3.0 document?
    When I open an existing document it always open too small, I resize it but next time I open it it's small again! Please help! I used to be able to resize them then they stayed that size until I resized it no matter how many times I opened and closed it before upgrading to 3.0!!!!

    This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
    Printer settings
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • How do I  set the default view size when I open a word.doc from mail

    I use the mail program all day long and open MS Word docs and the size is default of 100% but the actually view of the screen make it look like a font of 7 or 8
    I have a difficult time even viewing the document until I blow it up to 150%. It's not because I'm blind I have excellent vision..
    HOW DO I SET THE DEFAULT VIEW OF DOCUMENTS

    This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
    Printer settings
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • How to set the default maximum size for java's heap?

    Hi!
    Im trying to set the default max size for the java heap - but not from the command line.
    I would like to set it higher as default on my computer.. how can I do that?
    thanks!

    >
    ...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
    OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

  • How to set the default page size ?

    Hi there,
    I just bought a 15.4" Macbook Pro.
    When I use Safari to surf, I found that the image/fonts are to small for my liking.
    So I did VIEW > ZOOM IN two times & the image/fonts & it become satisfactory.
    But after I shutdown & restart the laptop again, I find that whenever I startup, the page in Safari when back to the smaller setting & I have to click VIEW > ZOOM IN twice again .
    My question is how to make this settings permanent ? It is irritating having to do VIEW > ZOOM IN everytime I start up the system !!
    Any ideas ?
    Thnaks

    In Safari, go to Safari >> Preferences. Click on the Appearance tab. Set the standard and monospaced fonts. That not only sets the default fonts for web pages (many web-sites will specify other fonts), but also the default sizes (though web-sites can specify alternate sizes). Also, on the 'Advanced' tab, there's a checkbox labeled 'Never use font sizes smaller than' followed by a drop-down. This permits you to prevent the text from going beneath the specified size.
    The advanced tab also permits you to provide a CSS stylesheet to apply as the default. If you know CSS, this can be very powerful.

  • SSRS 2008 Bubble chart - How to set the default bubble size?

    Hi,
    I have a bubble chart. I want to set the size of the bubble in the chart and the size of the bubble in the legend display box to be same. I increased the size of the marker to increase the size of the bubble in the legend display box but it is not increasing
    after 8pt. In my chart the size of the bubble is not dependent on any variable or parameter. It is the default size. Is there any way that i can make the size of both the bubble same?

    Hi Alok_Aswal,
    In SQL Server Reporting Services 2008, the Bubble chart has several custom attributes which allow us to control the size of the bubbles. "BubbleMaxSize" and "BubbleMinSize" attributes allow us to define the size of the bubble in the chart series. The values
    set are in percent of the whole chart size. We can find those attributes in the property pane by selecting bubble series and expanding 'CustomAttributes' properties.
    And based on my research, the Marker size has a wide range, but for some reason once we get to around 8 the bubble in the legend will not grow any bigger. So in your scenario, we can set the Marker size to 8pt, then set the appropriate “BubbleMaxSize" and
    "BubbleMinSize" based on the chart size to make the size of both the bubble are the same. For example, we can also set “BubbleMaxSize" and "BubbleMinSize" to 8, then manually adjust the chart size until both the bubbles have same size.
    Beside, we can delete the original legend, and drag a tablix to the right of the chart. And then insert the corresponding data and color to tablix to let it looks like a legend. For more details information, you can refer to the link below to see Mike’s
    post:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cbf2f48e-fe40-4c1b-b82a-d40fd269f2ef/setting-custom-colors-on-a-column-stacked-bar-chart?forum=sqlreportingservices
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to set the default screen header structure of PA30?

    Hi,
    I am not talking about the screen header of a particular infotype, e.g. IT0002. I have managed to change the header for any infotype by changing  the structure of relevant screen header modifier.
    The question is, how to change the screen header at the initial screen of PA30?
    Because all settings in table V_582A_B are with an infotype number. No idea about how to change the default sreen header.
    thanks in advance.

    PA20 / PA30 Initial screen always maps to screen header '00' even if it's not in V_582A_B. Therefore, if you have an infotype currently maps to screen header '00' and plan to have initial screen header to be different than the header of this infotype, you'll need to re-configure this infotype to map to a different screen header.
    Rgds.

  • How do I set the default page size for printing on a 8450.

    A few days ago I printed some envelopes and now when I print from some programs, the print page size has remained the envelope size.  I want to print from any program on letter size paper without changing the settings every time.
    Thanks
    This question was solved.
    View Solution.

    This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
    Printer settings
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • I can set my default home page (when Firefox starts) but if I open subsequent tabs I get a blank page. How do I set my default home page for all tabs.

    I set my default home page to AltaVista.com. This page comes up as expected when I start Firefox. However if I open a new tab I get a blank page. How to I setup Firefox to use my default web page for all subsequent tabs. This was an easy process in IE

    Sounds like you want the New Tab Homage extension.
    https://addons.mozilla.org/en-US/firefox/addon/777/
    For more info about extensions, see [[Using extensions with Firefox]]

  • Why is the welcome screen blank when InDesign starts?

    When I start InDesign the welcome screen is blank. Does anybody know how to solve this problem?

    P Spier,
    I tried removing preference but the welcome screen still comes up blank. I even uninstalled and reinstalled.
    Nothing is working and this is very annoying.
    Dorothy Charles
    Desktop Publisher
    The Segal Group
    333 West 34th Street | New York, NY 10001-2402
    T 212.251.50320 | M 718.490.6797
    [email protected]
    Monday – Thursday – In Office
    Friday - Out
    Members of The Segal Group include:
    Segal Consulting, Sibson Consulting,
    Segal Rogerscasey and Segal Select Insurance.

  • How do you set a default screen size for safari windows to open at ?

    Hi guys, I'm running my mac mini through a 50 inch plasma. I really like that safari opens the browser at a size that's just big enough to fit the page you are viewing to; but annoyingly my flatmate keeps changing the window size to full screen. I don't like this and have tried to play around with the settings so that it opesn in a default size every time but have been unable to do so.
    If anyone has any suggestions it'd be greatly apreciated as this seemingly stupid problem is realllllly annoying me.
    Cheers,
    AJ

    Evict your flatmate.

  • How do I set the default screen a pdf file opens on?

    I have a laptop on a docking station, and by default the pdf file would open on my external monitor.  For some reason, it now opens on my laptop screen by default.  How can I change this?  I am using Reader X.  Thanks!

    I would say one changes that in a control panel, not in Reader.

  • My Macbook is stuck on the Gray screen again when it starts up:

    My Back drvie that I all my stuff saved to I'm out of space on and when I tried to back up my Mac last time it said the backup failed- since the backup was to big.
    I do not want to reinstall the OS since I have I have a alot of webpages in iWeb and my iTunes stuff & all of my Documents and photos & my mail, that I do not want to loose.
    Do you think Apple work try and recover the things on the hard if I ask them nicely?
    What should I do.
    Message was edited by: blark
    Message was edited by: blark

    Few minutes ago i was answering nearly same question. This happened to me either. Try reinstalling the os. If you have a dvd ten with the dvd but if you have lion shut off, turn on and immidietly hold the option key and click recovery hd or whatever its called. I hope this works for you. Try reading https://discussions.apple.com/message/20088037#20088037. I answered how to do it. I hope this helps you.

  • How do I set the default Hero image in a Muse slideshow widget when using Free Form Thumbnails?

    Hello,
    I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails"
    box checked.
    In other words, when the page loads I want to define which image displays as the first Hero image.
    If I do not select the "Free Form Thumbnails" option, the top left Thumbnail image always displays first. This is fine.
    But when I select the Free Form Thumbnails" checkbox I don't know how to define which image shows first as the Hero image.
    I have a short video at this link where I illustrate the question:
    http://amson.org/misc/default-hero-image-1.mp4
    I have added a WMV video file at the link below:
    http://amson.org/misc/default-hero-image-1.wmv
    Okay… I think I've worked out how to do it!
    [1] First have the "Free Form Thumbnails" box UNCHECKED.
    [2] Organize the Thumbnails and place the image that you want to be the first Hero image when the page loads in the top left corner of the Thumbnails group.
    [3] When you "Preview Site In Browser" the Thumbnail image in the top left corner will always display as the first Hero image.
    [4] If you want "Free Form Thumbnails" go ahead now and SELECT that checkbox.
    [5] Whichever image was in the top left of the Thumbnail group before you checked "Free Form Thumbnails" will still show up as the first Hero image when the page loads, regardless of where that thumbnail image is located within the Thumbnail images group.
    Thanks very much.
    Chris.

    Hi,
    The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
    Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
    Hope it clarifies the things.
    Regards,
    Ved

  • How does the Touch screen look in direct / indirect sunlight?

    Was sitting on the LIRR heading home when I had this thought... after watching some guy playing with his PSP, as the sun was falling on his screen.... hhmmmm, I wondered how my Touch, which is now enroute from Anchorage, is going to handle the sunlight hitting it? Will I be able to watch my movies/tv shows without problem? How does the Touches screen look when sunlight hits it. I realize that sunlight hitting the screen is not an optimal viewing situation, but couldn't help but think how it would look. Those that are lucky to have one.... how does it handle sunlight?

    readable, but not great. I had it out in bright Ozzie sunshine and I could use it, but I wouldn't watch a movie on it.

Maybe you are looking for