Personnel subarea  changed in hr module but not reflecting to bi with same

Dear all
            below is the scenario at present
personnel subarea  for employee in april was  as   1111.
personnel subarea for that employee in MAY IS       1120
                                that is one employee changed from personnel subarea 1111 to 1120 in HR - MODULE R/3
In BI still he showing in personnel subarea 1111 only
How to get changed this employyye form personnel subarea 1111 to 1120 where as PERSONNEL AREA IS SAME
Provide your valueble suggestions.
Thanks
satish.A

Hi Thankd for ur qick reply
Already i have loaded the data of o employee but it is not working.Just now also done the same there is no use
personnel subarea is not getting changed as of r/3 for the employee.
Any more ideas regarding the issue it will be helpful
Thanks
Satish.A

Similar Messages

  • Cisco Anytime Connect VPN working from iMac but not from MacBook Air with same settings and wifi network

    Hi guys,
    I'm having trouble connecting my new MacBook Air to Cisco Anytime Connect VPN.
    The same configuration works with my iMac, in the same network and same Mac OS Mountain Lion on both computers.
    After successfully connecting to VPN after a few seconds it gets disconnected and, what is worse, WIFI is not working any more in my macBook Air, I need to deactivate it and start again.
    With iMac with the same settings it doesn't happen.
    Any ideas?
    Thanks!

    Did you power cycle the network? That's always the first thing you want to do if a device is "missing" or not connecting to your network correctly.
    If you have not already tried this a few times, power down the entire network...all devices, order is not important.
    Wait a few minutes and place the MBAir close to the TC
    Start the modem first and let it run a few moments by itself. Then start the TC if it is the device connected to the modem and let it run a few moments. Then start each device one at a time the same way.

  • How to restrict the user to change the project structure but not the documents?

    Hi,
    I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
    http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
    I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way  to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
    Thanks,
    Rutvik Uapdhyay. 

    Hi Rutvik,
    Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
    role  - SAP_SOLAR01_ALL
    this take care of objects in Solar01 like tab access etc
    role -SAP_SOL_KW_ALL
    this takes care of entire documentation within solman
    hope this helps
    Regards
    Prakhar

  • How can I change my security questions but not knowing them please reply burly bought a gift card, How can I change my security questions but not knowing them please reply burly bought a gift card

    How can I change my security question but not knowing them please rePly quick burley bought a gift card..

    Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
    (86811)

  • I changed my User ID it changed on my phone but not on iCloud and it wont let me change my apple ID to my new ID how do I fix this?

    I changed my User ID it changed on my phone but not on iCloud and it wont let me change my apple ID to my new ID how do I fix this?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you delete the existing account you will get an option to keep the iCloud data on your device.
    Before deleting the account, save any photo stream photos that you want to keep to your camera roll.

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

  • Changes to Derived Logical Column not reflected in Answers

    Before I go off my rocker and stab myself with my IPhone lightsabre... :-)
    I created a new logical column for an existing table in my BM, deriving from an existing column (a datetime field called ESTIMATEDCLOSE) as follows:
    MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4))
    ...which should give me something like "Jan - 2008". The problem is that it returned something like "2008/01/31 00:00:00" in Answers - completely unexpected.
    I decided to start out small and try something simpler, changing my derived column to be only Sales.OPPORTUNITY.ESTIMATEDCLOSE. This returned "2008/01/31 00:00:00" in Answers - sort of expected.
    Then I changed it to MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE). This also returned "2008/01/31 00:00:00" in Answer!!!
    It almost seems as if a derived logical column is cached in some weird way and changes to the formula is not reflecting in answers. Thinking that something so simple must work and I made a simple mistake somewhere I have spend a good part of the past day playing around with this and trying every possible solution I can think of - no luck. The odd thing is that I would rename my logical column and this will be reflected in Answers, but changes to the derived expression is not reflected.
    - I deleted the column and started all over - no luck
    - tried creating derived columns using different datetime expressions or even just concatenating strings to each other - no luck.
    - Restarted all the Oracle services, thinking it's a cach'ing issue - no luck.
    - I rebooted the server - no luck.
    Once, when I started out with only MONTHNAME(Sales.OPPORTUNITY.ESTIMATEDCLOSE) I got back correct values in Answers (Jan, Feb, Mar..) and I thought the problem was finally gone. So I added || ' - ' || CAST(Year(Sales.OPPORTUNITY.ESTIMATEDCLOSE) AS CHAR(4)) to the derived formula. Guess what, Answers kept on giving me back only the Month names, completely ignoring my updated formula.
    Anybody else ran into this problem? Something so simple should surely work...

    John,
    Yes, cleared the cache (from Dashboard Administration) and also used nqcmd Call SAPurgeAllCache. Restarted BI Server. Still no luck.
    I tried your formula and then only got back "2008/01/31" (just the date without the timestamp) - very strange.
    Then I noticed the following amazing thing (by accident):
    I started with a request in Answers that does not contain my derived column and then add my derived column to the report. The text would be all wrong in this column (Jan, Feb, March). Then I add the same column again to the report and the second added column will magically show the correct strings (Jan - 2008) !!! Even stranger is that the moment I added the same column again to the report, the text on the first column would also magically jump to the correct values (Jan - 2008).
    I did a bit more testing and created a blank request and added my derived column as the only column - this time it will show the correct values immediately. It does seem like it's tied to the content already in the request. I went a step further and saved my buggy request and added it to a Dashboard - it worked perfectly in the Dashboard.
    Must be something buggy here in Answers when working with derived columns. I'm on 10.1.3.4...

  • E Recruitment -Candidate applied for job but not reflected candidate name

    E Recruitment
    Candidate applied for job but not reflected candidate name Recruiter Dashboard
    Please any one suggests me what is problem?
    Regards
    Eshwar

    Hello Sri,
    the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
    If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
    For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
    For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
    Kind Regards
    Roman

  • Since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.  any suggestions?

    since moving to iCloud, my mobileme email works ONLY on my iPhone, but not on my PC with Outlook.  I get an error message indicating the authentication is not accepted.

    To anyone who has viewed this post and is having similar difficulties, the answer came on a different forum: I dragged & dropped the files from Mail to iCloud Drive. Opened them on my MB Air, they were saved in Templates and are now accessible across all my devices.
    Answer came from SGIll: Numbers templateshttps://discussions.apple.com/message/27505880#27505880Numbers templates

  • Did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.

    did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.
    also this takes huge amount of time, almost 10 hours to download, even using 3G Net connection.

    Hi kiwirudy,
    I've had the same problem more than once since I started trying to download my 14 April purchase of OS X Mountain Lion.
    I found a property list called manifest.plist in my ~/Library/Application Support/AppStore folder which had a Boolean property called failed checked. I unchecked it and afterwards I was able to resume my download.
    Here are some steps I've found useful:
    Close the Mac App Store.
    make a copy of the  ~/Library/Application Support/AppStore folder. For some strange reason the Mac App Store likes to just delete it in some circumstances, which will mean that one has to start one's download again from the very beginning.
    Double click on the manifest.plist in one's ~/Library/Application Support/AppStore folder.
    This should open it in Property List Editor.
    Expand all the nodes (holding down the alt key and clicking on the highest collapsed node should do it.
    Find a key called failed of type Boolean and uncheck it.
    Save the manifest.plist and close it.
    Open the Mac App Store.
    The red message "an error has occured" should now be gone and one should be able to resume one's download.
    In the event that the ~/Library/Application Support/AppStore folder gets deleted:
    start the download again (it will start from the beginning), pause it and close the Mac App Store.
    copy your backup copy of the pkg file back to its sub-folder (it's a numbered folder in the ~/Library/Application Support/AppStore folder).
    Open the Mac App Store and resume your download.
    It should continue from where it left off.
    This has worked for me so far. I'm holding my breath. Don't know if I'll still be alive when it's finished.
    Regards
    Nic
    Message was edited by: n c h

  • All of a sudden, emails adressed to me are received on my iPhone, but not on my MacBook. Same email address. Can somebody help? Thanks

    All of a sudden, emails adressed to me are received on my iPhone, but not on my MacBook. Same email address. Can somebody help? Thanks

    You cannot, all content is tied to the Apple ID used to obtain them.
    Content from one Apple ID cannot be merged or transferred to another Apple ID.
    You need to recover your Apple ID for updates.
    https://iforgot.apple.com

  • Mail in Mavericks not replacing existing mail with same name

    Mail in Mavericks not replacing existing mail with same name.
    Thanks

    I have the same situation as you - sending out pdfs of designed pages and wanting to overwrite them continually. It used to happen on an older version of Mail, then it disappeared and now it's back with the latest version.
    It's more than annoying, it's downright driving me nuts. In the last hour I had to quit Mail seven times.
    Please send a fix for this Apple.

  • Personnel subarea change ?

    Hi all,
            Need to figure out whether we can change or edit a PERSONNEL SUBAREA. My client is planning to move from 4.6c HR to 4.7 HR. during this change they need to change some of the personnel subarea (i think just rename).So they need to do the necessary changes in 4.6c before they migrate to 4.7. Is there any report that can do the work?
                If this is not possible, Is there an option similar to reference personnel number IT 31? so that i can assign the old personnel subarea as reference to the new one.
    Thank you people
    Niranjan

    Hi Niranjan
    U can rename the Personnel Subarea name by
    SPRO->ENTERPRISE STRUCTURE->DEFINITION->HUMAN RESOURCE->PERSONNEL SUBAREAS.
    Then Double click on "Copy, delete, check personnel subarea".
    Then Click on "Replace Org Object"(3rd button).
    Then Gibve the Old and new name.
    This will change the name in every table.
    But after doing this U have to change the employee data separately.
    Award points if helpful.
    ~BiSu

  • View Object change ok in Jdev but not in Apps

    Hi All,
    I have changed some of the attributes in my page to point to columns in a
    different view object (Which I have amended) . Both of the view object are available to my AM.
    The changes work when run in Jdeveloper but not in APPS. I have reimported
    the page the changed fields are blank, do I also have to import the changed
    view object definitions XML into the MDS repository ?
    Thanks in advance

    You donot need to import ViewObject XMls to the MDs repository, they need to get in to the middle tier(JAVA_TOP). Are you talking about a table or a form layout ? Are you executing the query for the new ViewObject in processRequest, if not they will be blank.

  • Hello I have Problem in Apple Iphone 5 i already change it 2 time but not working properly, hello I have Problem in Apple Iphone 5 i already change it 2 time but not working properly

    Dear sir,
    I Purchases Iphone 5 when its launch but from first day I am facing network problem and call dropping i already change the phone 2 time but not solve the problem so I request you to give my money back so I can buy other phone if you are not give me proper reply I go through with consumer protection council.
    Regards
    Jitendra Hundia
    +91 999 8111777

    We are users. We aren't going to give you anything. You are not talking to Apple.
    What carrier are you using? Aircel and Airtel are the only supported carriers in India. If you're using a different carrier, then switch to one that's supported.

Maybe you are looking for