Phase 2 type code table needed

Hi, we have the following error with a L2L tunnel between ASA 5540 ver 8.0(3) and a Sonicwall:
<163>%ASA-3-713016: Group = x.y.z.w, IP = x.y.z.w, Unknown identification type, Phase 2, Type 7
What does it mean ?
Do you have a phase 2 type code table ?
thanks

RFC 2407:
       ID Type                   Value
       RESERVED                            0
       ID_IPV4_ADDR                        1
       ID_FQDN                             2
       ID_USER_FQDN                        3
       ID_IPV4_ADDR_SUBNET                 4
       ID_IPV6_ADDR                        5
       ID_IPV6_ADDR_SUBNET                 6
       ID_IPV4_ADDR_RANGE                  7
       ID_IPV6_ADDR_RANGE                  8
       ID_DER_ASN1_DN                      9
       ID_DER_ASN1_GN                      10
       ID_KEY_ID                           11
http://www.ietf.org/rfc/rfc2407.txt
ASA will only support ID_IPV4_ADDR and ID_IPV4_ADDR_SUBNET when you're specifying proxy ID information AFAIK

Similar Messages

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

I need to add a single field from with_item table . need to write select query with reference to company code , account doc no , fiscal year

Hi Arun ,
Can you explain little bit more ??
what is account doc no?
what are the transactions should be displayed in your output??
-Rajesh N

How to create a Attribute "Type standard table OF" to a OSS NOTE

Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
Alysson

Hi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option?

First Party Legal Entity link with Fiscal Classification Type Code- R12

Hello Team
We are working on one of the dimension on E- Tax (BI Apps).
As part of the dimension we need to identify the Legal entity and the linked Fiscal Classification Type Code (Associated Fiscal Classifications) to it. This we are able to see from the application with the following navigation.
Parties: Party Tax Profiles > Party Tax Profiles > Query with the First Party Legal Entity.
Now would seek your help from the technical perspective. How is this linkage happens between Legal Entity and Fiscal Classification Type Code (Associated Fiscal Classifications to it)? We have verified few tables and there is no link available.
If possible provide us the Join Conditions.
Regards
Pawan Tallam

Hello Hansen,
I found this note on My Support:
"R12. EBTax. How to Differentiate Tax Rate Code for Payables and Receivables Transactions in Tax Classification Code LOV (List of Values). [ID 756985.1]
Tax Classification Code LOV ( List of Values) is showing all tax rates created in EBTax. You need to choose your tax rate code in the list of values on tax classification code in Payables or Receivables. How do you differentiate the Tax Rate Code for Payables and Receivables transactions in the Tax Classification Code LOV?
*Solution*
Please note that in R12, there is a centralized tax engine. Tax set up made in EBTax will be and can be applicable to both Payables and Receivables. Any tax rate created in EBTax, will be available as a Tax Classification Code LOV in both these applications. It cannot be restricted and it is the intended functionality.
If Payables and Receivables exist with unique operating units then the MOAC security settings can be used to restrict the LOV. Additionally if EBTax is configured propertly the tax classification codes will not be used for tax determination except in exception based scenarios. Please see the case study in *Note 577996.1* for examples
I just setup ebTax using tax codes for AR and AR and, by the moment, the tax codes from both modules are shared on the LOV. We used a convention for the code naming...but I'm will be looking note 577996.1
Regards.

Occurs 0 Versus Type standard table of

Is there a distinct advantage of using "TYPE STANDARD TABLE OF" instead of "OCCURS 0" to declare table. Other than the code being more systematic with type. Is there any difference in terms of advantage.
Is there any advantage other way round?
Will award points for the right answer, thanks for reading

Declaring an internal table with OCCURS 0 is not advisable now a days because it does not work in object oriented abap like BADIs.
Instead, we need to create a work area like line of internal table.
    TYPES: BEGIN OF ty_itab,
           category_id TYPE comt_category_id,
           category_text TYPE comt_category_text,
           hierarchy_guid TYPE comt_hierarchy_guid,
           non_assignable TYPE comt_non_assignable_category,
         END OF ty_itab,
         ty_t_itab TYPE TABLE OF ty_itab.
DATA: lt_itab TYPE ty_t_itab WITH HEADER LINE.
OR
DATA: lt_itab TYPE STANDARD TABLE OF ty_t_itab,
      wa_itab like line of lt_itab.
Thanks,
SKJ

Attach User define tables and view table need add to database into my add-o

Hi there,
I want to deploy an addon, there are User define tables and view table need add to database.
I need some advice on some issues..
1. Can I attach User define tables and view table need add to database into my addon.
2. I wonder which chance is properly to add them, if add these user define objects in time of install and I can't get the enough information that connect to SQL server
Thanks for any help.

Hi Weerachai,
Here's an example of how to create a user-defined table in code. My suggestion would be to check if it exists when your add-on starts up and then if not, create the tables, fields and objects.
'User Table
    Private Sub CreateTable(ByVal sTable As String, ByVal sDescription As String, ByVal oObjectType As SAPbobsCOM.BoUTBTableType)
        Dim oUserTablesMD As SAPbobsCOM.UserTablesMD
        Dim iResult As Long
        Dim sMsg As String
        oUserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
        If Not oUserTablesMD.GetByKey(sTable) Then
            oUserTablesMD.TableName = sTable
            oUserTablesMD.TableDescription = sDescription
            oUserTablesMD.TableType = oObjectType
            iResult = oUserTablesMD.Add()
            If iResult <> 0 Then
                oCompany.GetLastError(iResult, sMsg)
                MessageBox.Show("Error Creating Table: " & sTable & " Error: " & sMsg)
            End If
        End If
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTablesMD)
    End Sub
'User Field
    Private Sub CreateField(ByVal sTable As String, ByVal sName As String, ByVal sDescription As String, _
                            ByVal iSize As Integer, ByVal aFieldType As SAPbobsCOM.BoFieldTypes, _
                            ByVal aSubType As SAPbobsCOM.BoFldSubTypes, ByVal sLink As String, _
                            ByVal bMandatory As SAPbobsCOM.BoYesNoEnum)
        Dim oUserFieldsMD As SAPbobsCOM.UserFieldsMD
        Dim oTable As SAPbobsCOM.UserTable
        Dim iResult As Long
        Dim sMsg As String
        Dim i As Integer
        Dim x As Integer
        Dim bFound As Boolean = False
        Dim oField As SAPbobsCOM.Field
        oTable = oCompany.UserTables.Item(sTable)
        For i = 0 To oTable.UserFields.Fields.Count - 1
            oField = oTable.UserFields.Fields.Item(i)
            'MessageBox.Show(oField.Name)
            If oField.Name = "U_" & sName Then
                bFound = True
            End If
        Next
        System.Runtime.InteropServices.Marshal.ReleaseComObject(oTable)
        If Not bFound Then
            oUserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
            oUserFieldsMD.TableName = "@" & sTable
            oUserFieldsMD.Name = sName
            oUserFieldsMD.Description = sDescription
            oUserFieldsMD.Type = aFieldType
            If aFieldType = SAPbobsCOM.BoFieldTypes.db_Alpha Or aFieldType = SAPbobsCOM.BoFieldTypes.db_Numeric Then
                oUserFieldsMD.EditSize = iSize
            Else
                oUserFieldsMD.SubType = aSubType
                oUserFieldsMD.Mandatory = bMandatory
            End If
            oUserFieldsMD.LinkedTable = sLink
            iResult = oUserFieldsMD.Add()
            If iResult <> 0 Then
                oCompany.GetLastError(iResult, sMsg)
                MessageBox.Show("Error Creating Field: " & sTable & "." & sName & " Error: " & sMsg)
            End If
            System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD)
        End If
    End Sub
If you want to create a View I think you would have to use the RecordSet object. This will ensure that you don't have to log in to the database again
Hope it helps,
Adele

Difference between line type and table type

hi,
can any one explain the difference between line type and table type . and how to declare a internal table and work area in BSP's

hi,
Go through this blog, this might help you.
/people/tomas.altman/blog/2004/12/13/sdn-blog-how-to-do-internal-tables-in-bsp
People who have worked with ABAP for a while sometimes forget that the internal table concept is rather different than what exists in most programming languages. It is very powerful, but at the same time can be confusing.
In SAP it is possible to have a table which is the rows and a headerline which is the working area or structure which can then be commited to the table.
With a BSP, if we try to create an internal table within the BSP event or layout we will get the following error: mso-bidi-
                        "InternalTableX" is not an internal table - the "OCCURS n" specification is mso-bidi- missing.
class="MsoNormal"><![if !supportEmptyParas]>The problem we are seeing as an inconsistency has to do with the difference between classic ABAP and ABAP Objects. When SAP introduced ABAP Objects they decided to clean up some of the legacy syntax and create stricter rules. However they didn't want to break the millions of line of code that already existed, so they only implemented these stricter checks when OO is being used. Therefore you can declare a table with a header line in a regular ABAP program or Function Module but you can't have one with a header line in OO.
Because everything in BSP generates ABAP OO classes behind the scenes, you get these same stricter syntax checks. My suggestion is that you have a look in the on-line help at the section on ABAP Objects and always follow the newer syntax rules even when writing classic ABAP programs.
In a BSP when we need to work with a table we must always do the following:
1, in the Types definitions create a structure:
                        types : begin of ts_reclist,
mso-bidi-        style='mso-tab-count:2'>                            receiver type somlreci1-receiver,
mso-bidi-        style='mso-tab-count:2'>                 style='mso-tab-count: 1'>             rec_type type somlreci1-rec_type,
mso-bidi-         style='mso-tab-count:2'>                            end of ts_reclist.
mso-bidi- <![if !supportEmptyParas]> <![endif]>
but we must remember this is only a structure definition and we cannot store anything in it, although we can use it elsewhere as a definition for Structures(WorkAreas)
2, in our Types definitions (this is the best place for this one as we can then access it from many areas without having to create it locally) so in the Types definitions we must create a TableType:
class="MsoNormal">                         types : tt_reclist type table of ts_reclist.
class="MsoNormal"><![if !supportEmptyParas]> <![endif]> this TableType is our table definition and again we cannot store anything in it, but we can use it elsewhere as a definition for InternalTables
3, now that you have laid the foundations you can build and in the event handler, it is now simply a case of creating the InternalTable based upon the Table definition:
                       data: t_reclist type tt_reclist.
and creating the structure based upon the structure definiton:
<![if !supportEmptyParas]>   <![endif]>                         data: s_reclist type ts_reclist.
as described above, the structure becomes the work area and this is where you assign new values for elements of the table eg:<![endif]>
                        s_reclist-receiver = '[email protected]'.   "<-- change address
mso-bidi- <![if !supportEmptyParas]> <![endif]>
mso-bidi-                         s_reclist-rec_type = 'U'.
and then once the data is in the elements of the structure, the structure can be appended to the internal table as follows: class="MsoNormal">
                        append s_reclist to t_reclist.
<![if !supportEmptyParas]> <![endif]>
the internal table will then be readable for the ABAP function and can be applied for example as follows: class="style1">           style='mso-tab-count:1; font-family: "Courier New", Courier, mono;'>
class="style1">CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
                        EXPORTING
style='mso-tab-count:2'>                                    document_data = docdata
style='mso-tab-count:2'>                                    DOCUMENT_TYPE = 'RAW'
style='mso-tab-count:2'>                                    PUT_IN_OUTBOX = 'X'
style='mso-tab-count:2'>                                    COMMIT_WORK = 'X' "used from rel.6.10
                        TABLES
mso-bidi-font-size: style='mso-tab-count:2'>                                    receivers = t_reclist
class="style1"> <![if !supportEmptyParas]>   <![endif]>
<![if !supportEmptyParas]>F inally, a comment from Thomas Jung,
<![if !supportEmptyParas]> when defining my work area for an internal table I like to use the like line of statement. That way if I change the structure of my table type, I know that my work area will still be OK. Second, your types and table types don't have to just be declared in your code. You can create a table type in the data dictionary and use it across multiple programs(also great for method and function parameters). I really push hard for the other developers at my company to use the Data Dictionary Types more and more.
Hope this helps, Do reward.

How can i 'translate' the formules in Rep S_ALR_87013532 to code (tables) ?

Hi
I'm creating a report wich shows the Commit, Paid, Budget, etc. in PS module. I will take these column values from severel PS reports generated with the 'Report Printer' tool, wich allow to calculate the values vía a 'semantic formules' using key figures, Characteristic values, etc. (For example report S_ALR_87013532).
I need to know how to translate these formules to code (tables); but i really don't know anything about Report Printer, Key Figures, etc.
Any idea ? Does somebody knows how to translate the Report Printer formules to code reading tables ?
Any help will be apretiated !!
Regards
Frank

Hi Frank,
I saw your earlier post for Changes a peport created via Report painter. You can do via T/code GRR2.
Please go thru the documantation this will provide you step by step approach on Report painter.
<a href="http://www.virtuosollc.com/PDF/Get_Reporter.pdf">Peport painter</a>
<a href="http://www.thespot4sap.com/Articles/Code_CostCentreReport.asp">Report painter--test report</a>
Need more information please let me know.
Lanka
Ps: Please allocate the points if this answer helps you.

StreamCorruptedException : invalid Type Code AC .. In case of a network app

Hi
I am developing a peer-peer application here.
What i have is a client and a server on each user, both running parallell.
User A sends an object to User B through an ObjectOutputStream through the main thread.
User B reads it using an ObjectInputStream and passes the object that it read, to a new ObjectOutputStream, to be passed to User C.
User C just reads the incoming object using ObjectInputStream.
This iteration runs successfully for the first run!
The moment I go for the second iteration using User A, the method on User B throws a "invalid type code AC".
class Main{
Socket sock;
psvm(String args[]){
Client newCli = new Client();
newCli.setSock(<Sets the sock after getting the port and IP address from the user>);
sock = newCli.getSock();
ObjectOutputStream oos = new ObjectOutputStream(sock.getOutputStream());
oos.writeObject(new Client());
Class Server extends thread{
public void run(){
while(true){
ObjectInputStream ois = new ObjectInputStream(sock.getInputStream());
ois.readObject();
I read through this post on this forum and "EJP" asks that one OOS and one OIS be maintained per socket.
So what i did was add a setter method to the Client class which stores the Socket, and called the setter method instead of creating a new ObjectOutputStream object everytime. This way one ObjectOutputStream object would be maintained per socket per client class's instance.
class Client{
Socket sock;
ObjectOutputStream oos;
//Getter and setter for sock.
getSock()....
setSock()....
//Getter and setter for ObjectOutputStream
getOos()....
setOos(){
oos = new ObjectOutputStream(getSock().getOutputStream());
When i do this, the initial iteration itself fails.
I am posting the outline of my code since it is a big file. But if writing out a smaller version of the app and posting it here will help better understand the scenario, then I'll do it.
I am re-posting this, coz in the previous posts regarding this same issue, i found that people were writing and reading on the application. While mine is a case of a client-server send and receive.
I am just writing multiple times at the client and reading multiple times at the server. And each time i'm creating a fresh ObjectOutputStream object, and Client object.
I don't close the streams since that closes the sockets, but i need to keep the sockets open and send multiple objects on the same socket.
The explanation is a bit lengthy, so let me know if something is not clear. :)
Thanks
Akshay

I'd be grateful if someone can throw some light on this issue, i have to get beyond this ASAP, and i cannot find a workaround at all.. :/

CSV output (export to excel) don't use right code table

CSV output (export to excel) don't use right code table. We use code table
8859-2 (reports and forms are OK). Why export to excel don't use this code table.
Thanks for answers

You could also take the example from my blob that Denes mentioned and instrument it to output in either CSV or HTML. This way, you could have a single procedure that worked for both formats.
All you would need to do is handle each field differently - pad a TD and /TD (with proper brackets, of course) if its HTML or just append a comma if it's CSV.
Thanks,
 Scott 
http://spendolini.blogspot.com/
http://sumnertech.com/

How does a record type and table type works

Hi,
How a record type and table type work for the ref cursor,
below i m giving an example but its giving me errors
can any one help me for this?
declare
type empcurtyp is ref cursor;
type rectype is record (veid t.emp_id%type, vename t.ename%type);
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab tabtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;
here we hav table t and i m taking only two fields of the table t which r emp_id and ename.

Hi,
What errors are you getting with this? From experience you don't need a loop to put the records into the ref cursor its usually done on block.
HTHS
L :-)

Dynamic Lookup Type Codes in a Message

Hi there,
I have the following requirement and I do not know if it is possible to do it or not. Advices, help and suggestions are more than welcome.
Here is the my problem:
I have a notification/message that has a respond item linked to a Lookup Type. I would like to change the Description of the lookup type codes depending on a value store in a table. I was looking for some sort of PKG/Procedure to do so but I could not find.
Is there a way to achieve it without duplicating the notification (linking to the different Lookup Type/Codes)?

Hi,
I've answered your duplicate post on the WorkflowFAQ forum at http://smforum.workflowfaq.com/index.php?topic=783.0
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Modify Syntax on Internal table of type ANY TABLE

Hi,
I have declared one internal table which is of type ANY TABLE.
In the Loop statement, I am trying to Modify that Internal table from WA.
Then I am getting one Error message
"You cannot use explicit or implicit index operations on tables with types "HASHED TABLE" or "ANY TABLE". "C_T_DATA" has the type "ANY TABLE".
Above code I have placed in method of a corresponding Class.
Can u please advise me on this..How to modify the Intenal table .
Thanks and Regards,
K.Krishna Chaitanya.

Hi Krishna,
the modify statement is obsolete.
You can always LOOP AT [itab] ASSIGNING <field-symbol>.
This makes the loop never slower, depending on the table structure faster or much faster.
If you know the table structure at run time, you can use a field-symbol of that type. If not, you can use a field-symbol TYPE any. Then you have to assign the components to field-symbol to modify them, i.e.
field-symbols:
<table_line> type any,
<matnr> type mara-matnr.
loop at itab assigning <table_line>.
assign component 'MATNR' of structure <table_line> to <matnr>.
clear <matnr>.
endloop.
This technique (available more than ten years) works incredibly fast. My estimate is that if SAP would change all the old standard programs that way and use it consequently in the new ones, the whole system would be 20 % faster because myriads of unnecessary copy operations of LOOP INTO would not happen.
Regards,
Clemens.

Exporting Parameter of type 'INDEX TABLE'

Hi Experts,
there is a standard method CL_CRM_MKTPL_OL_TRADE->GET_TRADESPENDS in CRM which has an exporting parameter ET_TRADESPENDS of type INDEX TABLE. Could somebody give me a hint on how to call this method and work with the data that is returned? I am assuming that I will need field symbols for this, correct? Coding examples would be greatly appreciated.
Thanks,
Jens

Hi Jens,
INDEX TABLE is a generic type. The data object expected depends on configuration and/or context. As we don't have any CRM system I can check CL_CRM_MKTPL_OL_TRADE->GET_TRADESPENDS I can't give you the details.
I have some experience with comparable methods in SAP Transportation Managament which uses the BOPF framework. In program context, we know what type of table structure will be expected, so we defined a local table accordingly and passed it to the ET parameter.
If you don't have any idea on how to find out, just declare any internal table, i.e-lt_test type table of string. Then call the method with parameter ET_TRADESPENDS = lt_test. This will dump for sure. Enter debugger and check what kind of data are returned. From the field names you may get a clue what structure it could be. Dump analysis may also provide some info.
Regards,
Clemens

How to define complex type with table per record?

Hi,
for one of my tasks I'm dealing with XML export. After short investigation of the postings in the forum I found an acceptable solution:
Re: Convert ABAP to XML and Vice versa
The issue is that I need an XML file like this:
<plant>
<material>
    <purchases>data</purchases>
    <purchases>data</purchases>
    <purchases>data</purchases>
    <sales>data</sales>
    <sales>data</sales>
    <sales>data</sales>
</material>
<next material>
</next material>
</plant>
So here are the questions:
1. Is it possible (and how) to define such deep structured type where for each record (means material) there is at least 1 internal table connected to that record? That would let me use a record-2-DOM conversion and a standard DOM-2-XML renderer.
2. Could anyone please provide a very simple and short example?
Of course, I could write my own XML renderer and achieve what I need (without using DOM, simply write to file all the desired XML tags while looping at my *nested* tables), but if there is a way to define such a structured type and further to fill it with data, it would help me learn a little bit more about abap opportunities and would save me a bit more time to create a renderer.
Many thanks in advance.
Regards,
Ivaylo Mutafchiev

Hi,
You can declare deep structure as below
TYPES : BEGIN OF ty_address,
          house(10) TYPE c,
          street(10) TYPE c,
        END OF ty_address.
TYPES : BEGIN OF ty_itab,
         name(10) TYPE c,
         age      TYPE i,
         address TYPE ty_address OCCURS 0,
        END OF ty_itab.
DATA : i_address TYPE STANDARD TABLE OF ty_address,
       i_itab    TYPE STANDARD TABLE OF ty_itab.
DATA : wa_address TYPE ty_address,
       wa_itab TYPE ty_itab.
CLEAR : wa_address,
         wa_itab.
wa_address-house = 'House1'.
wa_address-street = 'Street1'.
APPEND wa_address TO i_address.
wa_address-house = 'House2'.
wa_address-street = 'Street2'.
APPEND wa_address TO i_address.
wa_itab-name = 'Test'.
wa_itab-age = 10.
wa_itab-address[] = i_address[].
APPEND wa_itab TO i_itab.
Also check structure BSPL_GRID_FIELDCAT field CELL_COLOR

Phase 2 type code table needed

Similar Messages

Maybe you are looking for