Phone broken, need to get contacts from backup assistant online but don't know how.
Just broke my phone and i need to get the contacts off it, and last i checked i had backup assistant that should have been saving them. where online do i find them once i log into my verizon account?
I'm terribly sorry to hear about your device, zealot1312. I want to ensure that you're able to review your contact list. I have provided the "How To Use Backup Assistant Guide" here; http://vz.to/1lQod67 . Step 5 will provide steps to print contact information.
YosefT_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
Read text from file, created string, but don't know how to split string.
I've been busy with a little application which should be able to save a (2d) array to a text file, and open it afterwards.
I already completed both steps, but i'm stuck at the reading part.
I'm not familiar with the load function, so i used Datainputstream, which i've converted to a String afterwards. The systemconsole shows the correct information when I put the string to the console, but now i want to split the string.
For example, my console writes:
FILE CONTENT=458,304,0,345,432
("FILE CONTENT=" has been manually added to the system.out)
Because im not English, and i don't know what I should search for on the web in order to find this, i've come up here and created this post.
I've got an object array which is 2-dimensional, and now i was wondering how i could "rebuild" my array array[x][c] in which the first number of my file content should be X and the other numbers should be put in [c].
Offcourse, the ',' should be skipped.
I do have read things about tokenizing and so on, but i think that every single letter is read then.
Any help would be much appreciated.Ok, thanks for the reply.
I feel a bit ashamed now, because my topic title contains the function i needed...
So, assuming that i would have
String content = "458,304,0,345,432";i could split this and put this in an array string using a code like
String[] arry = null;
array = content.split("\\.");I haven't tested the code yet, cause i'll go to bed soon, but will this split all at once and put it in the array or do i have to create a loop or something ?
And is it possible to put number one using split in the array[x][v] on the x location and the others at the [v] location ? (the first number of each five has to be added to [x] and the other 4 to [v] )
Again thanks for your reply, cause im a bit further this way in accomplishing what i want to reach :) -
Since this product is no longer supported by the manufacturer, I hope that someone out there will be able to help me find a way to get my calendar and contacts restored to the desktop. My handheld sat unused for a very long time, but my desktop calendar and contacts were current up until my hard drive crashed. I was able to recover the PalmOne files from the crashed hard drive but all I can see are *.dat files. When I try to import or restore, the *.dat is not a supported file extension. HELP! I have the original installation CD. Thank you
Post relates to: Zire 31
This question was solved.
View Solution..dat are the actual working files Palm Desktop is looking for - you can't import them.
Just create a user in Palm Desktop and copy the .dat files (that have more than 1k of data) over the existing address.dat and datebook.dat (or calendar.dat, I forget which existed on your device).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
really want to change the background color of my documents in the mobile app. ive tried to search the answer online, in blogs and other various 'life hacks' blogs or articles, but so far everyone is talking about the desktop version. i really want to figure this out. is there even an option for the mobile version for windows? the only editing icons when a document is open are: export, home, make public, search in document, highlight/strikethrough/underline/comment and continuous/single view. if there isnt an option to edit background color, can i suggest that the makers of the windows mobile version make one, and make it fast please! any help would be appreciated. -CHANGE BACKGROUND COLOR
hi, thanks for helping me ...
i have used the above url and made changes to my OAF page, but i didn't get the desired output and its also giving as the above code output .
i kept OraBgGrayVeryDark in Css style in property inspector for every region including PageLayout and i also did some changes in cabo/styles/*.css classes.
eventhough it is picking the color upto footer level only and it is not applying for advanced table also.
can anyone please give your views in this.. -
HT4972 I need to updated my iPad to iOS 5 but don't know how please help?
How do I update my iPad to iOS 5 or better please I'm so lost I need help thanks
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
I updated my I Phone 4 to the os 5.1.1 but lost all of my contacts. I believe it should still be stored in my laptop Apple file but don't know how to restore. I only see the restore option to the factory settings. I have never used the I Cloud.
If you did not sync afterwards, follow this article to restore from your latest backup:
iTunes: Backing up, updating, and restoring iOS software -
I am just trying to restore my photos from my pc to my phone that i have backed up already on my icloud but do not know how to do this on my iphone 6 ios 8.3
If the iPhone is still working and the photos are in the Camera Roll (i.e., taken on the iPhone) then, when you connect the iPhone to your PC, it should be recognized as a Camera and Windows should start AutoPlay.
See this http://windows.microsoft.com/en-us/windows/get-pictures-camera-computer#1TC=wind ows-7 -
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
-
Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hi, I tried to download a bunch of my favourite TV episodes. I was unable to get them all due to lack of storage. I increased my storage but the downloads didn't come. I tried deleting the already downloaded and viewed episodes but don't know how.
I'm wondering if I should increase my storage again but I'm not sure that's the issue.You need more storage on your iPad, however, it can't be increased. iCloud storage is ecternal to the iPad and is used for backup.
You need to delete some item on the iPad.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
SanDisk Connect Wireless Media Drive http://www.sandisk.com/products/wireless/media-drive/
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.
I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck. -
I accidentally erased a sticky from my Dashboard? I don't know how to find them in Time Machine.
I accidentally erased a sticky from my Dashboard? I don't know how to find them in Time Machine. Any ideas how to recover it?
When you have a Write window open press F9 to turn on the Contact Sidebar. Select the contact or contacts to send to. Hold the control key while clicking contacts to select more than one. Then use one of the Add To buttons at the bottom.
This looks like the first message you have posted here. You will get an email to the address you used when registering.
You can click on your username to go to your profile/activity page. I suggest that you bookmark that so you can find your posts and answers easily. -
I added items to my iPad calendar yesterday but they wouldn't copy into the calendar on my IPhone. I switched both devices off and on again but to no avail. The calendars were all ticked the same. I have now deleted the iCloud calendar from the iPhone but don't know how to get it back.
My Errands app is also not syncing. If I mark something as Done on the iPad, it's not removing them on the iPhone version.Hi SwimmingMummy,
I have a couple of articles here for you that will help you troubleshoot these issues with Reminders and Calendar:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/TS4000
Thanks for being a part of the Apple Support Communities!
Regards,
Braden
Maybe you are looking for
-
HOW TO REINSTAL THE OS SO YOUR AUDIGY 2 WO
/ Save all your settings: Start/All Programs/Accessories/System Tools/Files and Setting Transfer Wizard 2/ Ensure BIOS is correct (This is based on an Intel board but other boards have similar features and commands) a/ Enter BIOS setup by repeatedly
-
Help: Installing ODM patch 10.1.0.3.1 on Win 2K?
I am trying to install ODM patch 10.1.0.3.1 (ref 3978002 on metalink) on Oracle 10g RDBMS 10.1.0.3.0 on Windows 2K. When I run the patch installation script dm10131_patch.bat, the script hangs and never completes. I looked at the script and it appear
-
I've been searching the net for an answer all day, but can't work it out. I'm trying to create a video with frame-output 288x364. When I save it, I get the correct size of frame, but the video is only shown i the middle of the frame - like it dosn't
-
Bluetooth headset disconnects if not in iTunes
I have a Creative WP-450 Bluetooth Headset. I have a MacBook Air Summer 2012. I connect my headset. iTunes pops up. All is fine as long as I listen to music in iTunes. IF I close iTunes and stream media throug my browser or do anything other than lis
-
Slides in a Captivate 7 Table of Contents is not Navigable
This project is navigable from the table of contents until the final two slides. You cannot click on the last two slides (Slides 45 and 46) to view while in the course. - I have hidden the Quiz Review Slide (Slide 47) because we do not want the resu