Photoshop CC stops working after using Load Files into Photoshop Layers in Bridge CC

Okay, so basically I selected some 40 images in .bmp to load into Photoshop, but it stops working and closes. I don't have any other versions installed and I already tried installing it again, with no avail. Is there anything I can do to fix this? Should I also try installing Bridge again?

I run Windows 7 Ultimate, I have 2.00GB of RAM with 1.74 usable, and I selected 40 images, each about 2MB.

Similar Messages

MISALIGNMENT PROBLEMS USING "LOAD FILES INTO PHOTOSHOP LAYERS" FROM BRIDGE CC

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs. I was told the issue would be escalated... That was five days ago, and I've heard nothing.
Here is the problem: In ACR working on a bracketed group of five images shot from a solid tripod in Bridge CC. I carefully synchronize all parameters incl. crop, transform, exposure, etc. Then I go to Tools / Photoshop / Load files into Photoshop layers, and the images open in photoshop in a layered file..., BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not.
Photoshop CC & Bridge CC are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe two weeks ago. I have reset preferences, reset tools in Photoshop, even uninstalled and reinstalled Bridge CC 6.1.0.115 all to no avail. Any suggestions? I am desperate for some help.

I run Windows 7 Ultimate, I have 2.00GB of RAM with 1.74 usable, and I selected 40 images, each about 2MB.

Why while in Bridge Load Files into photoshop Layers does not work?

In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work. I have two images selected and when I execute that comman in Bridge nothing happens. I exited and restarted both PS and Bridge and still nothing. I am working in Windows 7 and Photoshop cs6.

No I tried File/scripts/load file into stack and still did not work.
There was an update to bridge and now it works. Thanks so much.

"Load files into Photoshop layers" fails to complete CS6

Hi all,
Hoping someone can help with the folling problem with Photoshop & Bridge CS6
When in Bridge, after selecting 6 images (CR2) using the command TOOLS>LOAD FILES INTO PHOTOSHOP LAYERS the first file will load into Photoshop, Photoshop will then generate a second blank layer and then read the second file. At this point the "script" will stop. I am left with a document with 2 layers. The top layer has my first image, the bottom layer is empty.
At this point when I quit Photoshop I am prompted to save this open document which appears to be the only open document. I choose not to save this as a file. I then get a dialogue box prompting to save another open document. Photoshop has loaded the second file to place as a layer but as the "script" has aborted I am left with an open, but invisible file.
When I first loaded CS6 on Snow Leopard, it would demonstrate this behaviour every time I attempted to run this command from Bridge.
I did a clean install on a blank HDD of OSX Lion. Installed CS6. The command worked without fail for about a month.
Then I would get the command aborting occasionally. Restarting Photoshop would let me continue for a few hours before this aborted script problem would happen again.
Over the last week it has become more frequent, to a point where this workflow is unusable.
A restart of Photoshop may fix the problem for the next batch of images, only to fail again soon after, or fail on the first attempt after a relaunch of Photoshop.
A reboot of my computer will allow my to load one or two sets of files before again failing to complete the command.
I have tried the following:
In Photoshop preferences:
disabling the "Use graphics Processor"
Increasing or decreasing the amount of RAM available to Photoshop
Changing the cache levels or changing the cache tile size
changing the scratch disk
Trashing the Photoshop preferences file (Photoshop Settings.psp)
In Bridge
Purging the cache
Increasing or decreasing the cache size
Resetting Bridge preferences (holding Command on launch) and deleting all cache files.
In general system
Quitting extra programs (Safari, Thunderbird, iTunes)
Sometimes this will seem to then allow Photoshop to load a full set of images, only to abort again after a few sets.
Rebooting the computer - again will work for a few images sets before again failing.
Now the fact that it worked fine for several weeks without presenting a problem would indicate that it is not a bug.
The fact that is slowly started happening then became more frequent would indicate something changing slowly over time - a larger cache folder perhaps, although purging known Bridge cache folders has not filed the problem.
Really at the end of my tether here. Even considering downgrading to CS5 - but don't want to have to use the older Adobe Camera Raw.
System is as follows:
Mac Pro 2 x 2.66 Quad Core
24GB RAM
ATI Radeon HD 4870 512
OSX Lion 10.7.4
I have seen a couple of others have posted having a the same problem, both with CS5 and CS6.
Hoping someone has an answer.
Thanks.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Adobe Bridge CC 'Tools Load Files Into Photoshop Layers' missing from menu.

Hi,
After updated to bridge CC the 'Tools > Load Files Into Photoshop Layers' has simply disappeared from the menu! Is there a plug in that I'm missing or is this something similar to how the Output module works, where you have to install the files manually?
Thank You

I uninstalled all Adobe products -> reboot -> reinstall; which didn't work.
So I had to uninstall all Adobe products again, then use the Adobe Creative Cloud Cleaner, reboot & reinstall everything again; then it finally worked.
This seems to be a regular thing since the introduction of Adobe CC, almost every new update or new versions breaks functionality & requires a complete uninstall -> reinstall process.

"Load files into Photoshop layers" completely missing from Bridge CS6

No options to load files into Photoshop layers. Why not, and how can I put several files into one Photoshop layer?
I'm using Bridge CS6 and Photoshop CC.

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

"Load Files into Photoshop Layers" persistent misalignment problem

I'm having a persistent problem which technical support was unable to resolve after being on the phone with them for 1.5 hrs.
I'm working in Bridge CC in ACR, synchronizing all parameters incl. crop, transform, exposure, etc. of a bracketed group of images shot from a solid tripod. When using the Tools / Photoshop / Load files into Photoshop layers command, the images open in photoshop in a layered file, BUT some are knocked out of alignment. Actually they have been cropped slightly smaller than the original file, always by the same number of pixels. Sometimes all layers are affected, sometimes not. Photoshop and Bridge are both up to date, as is the camera raw plugin. I’m on a new iMac i7 4-core, OSX 10.9.4. All software was newly downloaded from Adobe less than two weeks ago. I have reset preferences, even uninstalled and reinstalled Bridge CC 6.1.0.115 to no avail. Any suggestions?

Hi JJMack - I just re-read your post. For some reason I thought you were suggesting to make sure "Open documents in Tabs" was selected, it was. Now I realize you were suggesting to turn it off! As another attemp to solve this problem I did de-select it today. Seemed to work for a good while. I was getting very excited, then, on the last set of images I had to do it displayed the same problem. But, it did go for quite a while without failing, and when it did I was thrashing about trying to make another app active. When loading documents like this - with "Open documents in Tabs" de-selected, Photoshop wants to put the loading images as the front-most window, no matter what other apps (Bridge, email, web etc) I click on in the dock. I think it is related to the bug you described effecting the "load files to stack" command.
Hopefully Adobe is looking at this - mind you, I have read reports of people having this problem in CS5! Looks like that was never resolved sadly.
I'll keep testing and post back.
I am looking to upgrade my video card to see if it's a video memory thing.
What is very weird though is the fact that this problem didn't present itself until after several weeks of working with this command with no problem. No additional apps installed, nothing changed. Why would it start happening only after a while?
Thanks again for your suggestion.

Load Files into Photoshop Layers hanging...

I have both Bridge CS5 4.0.4.2 and Photoshop CS5 12.0.2 x64 open and running on a MacBookPro... when I highlight a few files inside of Bridge CS5, then go to Tools, Photoshop, Load Files Into Photoshop Layers, when those files start opening in Photoshop and stacking as Layers, the process just hangs and stops processing after the first Layer is placed - any ideas why this happens, or just a bug? Thank you!

any ideas why this happens, or just a bug?
As I can’t reproduce the issue so I would assume it’s not a bug per se.
Have you tried trashing prefs for Photoshop (after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed)?

How do you "load files into photoshop layers" in bridge cc

I am having difficulty following on instruction in learning photoshop cc.
The book says to load files as layers select(in Bridge) tools/photoshop/Load files into photoshop Layers.
There is no Photoshop Option in the Tools Menu in my Bridge CC.
Is ther another way?
Dave

I run Windows 7 Ultimate, I have 2.00GB of RAM with 1.74 usable, and I selected 40 images, each about 2MB.

How to create keyboard for Load Files into Photoshop

does anyone know if there is a way to create or is there an existing keyboard shortcut to Load Files into Photoshop from Bridge?

I should have been more specifc.
Much like in bridge-tools-photoshop-load files into photoshop, I want to load multiple files into a layered photoshop document.
Can't seem to find a keyboard shortcut for this action. Though I don't know how to write scripts very well but there are far too many keyboard shortcut posts I've searched and can't seem to find a way.
thanks

Am trying to access photoshop from bridge tool menu to load files into photoshop. only have illustrator

I am trying to access photoshop from the bridge tool menu so i can go to, load files into photoshop layers. I don't have photoshop listed under menu, just illustrator.

<moved from Adobe Creative Cloud to Bridge General Discussion>

W520: Optimus stop working after use of "discrete graphics only"

I have issue with Photoshop and Optimus, so I am forced to use discrete graphics only. It is an other story...
Issue is that when I choose discrete graphics everything if fine but when I change back to Optimus mode Discrete stops working. If I set some program to use quadro 1000m in Nvidia menu, it doesn't use it. They all use integrated graphics. I realized the problem when I checked Lenovo Power Management and Nvidia should have been on... It was not.
Problem is gone if I reinstall drivers but it's not nice to do every time. I use latest updates from Lenovo Update and my BIOS is 1.34.
Multiple display setup works while the problem exist, so Nvidia is still working but Optimus does no...
It would be nice if someone could try switching to "Discrete only", load OS, restart with Optimus and check if it can still use Nvidia GPU.
My english is not that good and if there are any difficulties to understand my point PLEASE ASK!
Cheers
Antti

hey Anselmus83,
welcome to the forums.
is the Optimus at version 8.17.12.7593 ? If not, download it here >> http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013693
Before you install, set your unit to diagnostic mode via msconfig before installing
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Time Machine stopped working after using two external drives

I'm using a MacPro OS x 10.5.8. I started using Time Machine in April 2011 to back up my files to a 2TB Lacie external drive connected via firewire. Everything has been working fine until recently. A friend needed some files transfered from Seagate 1TB to another external drive. I bought a Lacie 1TB USB 3 drive and connected it to my Mac to make the file transfer. After doing this I noticed that the generic drive icon for my 2TB Lacie backup drive had disappeared. I could see the generic icon for the new 1TB Lacie drive. Then I noticed a Lacie icon on my desktop. I clicked on it and found it was my 2TB backup drive.
I decided to check Time Machine to see if it was still working properly. When I tried to restore to a previous time, the restore button stayed grayed out and didn't respond. Other times it would light up and respond when I clicked on it but I got an error message. I would like to restore my system back before I connected the two ext hard drives used for file transfering in case that was what caused the problem. Could connecting another new Lacie 1TB USB 3 external drive have caused my problem? I haven't had this problem with other external drives.

First, merely connecting another drive could not have caused Time Machine to stop working.
Since your backup is in a doubtful state, your highest priority should be to protect your data by making another backup to a different drive. You need more than one backup anyway. Connect an empty drive, select it in the TM preference pane, and start a new backup set. Once that's done, I suggest you run "Repair Disk" in Disk Utility on the old backup volume.

Adobe Photoshop CC stops working upon saving a file.

I don't know how many people this has effected, may be just me but whenever i try and save my work on photoshop cc it gets to about 60% and a notification pops up saying that Adobe Photoshop CC has stopped working and windows will try and find a solution to your problem but it never works and closes photoshop. What do i do????
I use Windows 7.

and may i know how do i get it for you?

The volume keys on my MacBook Pro stop working after using headphones.

The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
Can someone please help!?

I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
Turn off laptop.
Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over.

Photoshop CC stops working after using Load Files into Photoshop Layers in Bridge CC

Similar Messages

Maybe you are looking for