Photoshop PSD files will not open in AE or PREM?? This was fine in CS6 and CC - just did the CC2024 update and now issues-any help much appreciated

Titles says it all really,
Recently upgraded to the 2014 CC update and now i can't send PSD files…or any files for that matter into Premier or AE. If i save the file in Photoshop CC2014 then i can see it in finder etc, but i try to import and i get the notice 'importer reported a generic error'
please help i have work to finish

I am having the same issue. I can create a single layer file in Photoshop and it imports fine. If I create a file with 2 layers it crashes Premiere cc. Premiere will not display the box with options to import single layer, sequence etc. Any ideas?

Similar Messages

  • I cant get Firefox to download any files including updates. I get an error saying "Windows has closed the filepicker unexpectedly" and Firefox freezes. I use Windows 7 64 bit and I have the error in Firefox 7. Any help much appreciated.

    At any attempt to download even update I get an error that says "Windows has unexpectedly closed the file picker".

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • Adobe photoshop CS6.Receiving the error "could not complete your request because it is not a valid photoshop document? Tried renaming the files and had working psd files and now all psd files will not open and getting the error listed. Anyone help please?

    Could not complete your request because it is not a valid photoshop document. Tried renaming the file extensions and still no luck.

    Nobody can tell you anything without proper system info or other technical details.
    Mylenium

  • This morning, Microsoft Entourage will not open about powerpc application.. it was fin last night

    Hi, I've never had a problem with Entourage until this morning when i powered up.. receiving  "you can't open the application microsoft entourage because powerpc applications are no longer supported"

    If you're still running Entourage, I would suggest upgrading to Outlook, part of Office for Mac 2011. Even if you're able to run Entourage, and it sounds as if you were, it's just not Lion or Mountain Lion friendly.
    Just my 2¢...
    Clinton

  • I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?

    I just bought the Nikon D750 and my raw files will not open in CC Photoshop. Is anyone else that has this camera experienced this problem?
    My Photoshop says it is up to date, but I am hoping that since this camera just came out, Adobe will have an raw file update soon.

    DNG Converter is FREE.  Yes, really.  No subscription needed.
    - Baloney, NOT FREE, it's a proprietary software, not open AT ALL, see Legal Notices, so stop trying to distort the truth here.
    Camera Raw (& DNG Converter) 8.7RC has been available since 2nd October, and opens D750 files in Photoshop & Bridge (& Lightroom using DNG Converter).
    Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs
    - Still a cumbersome process for this of us that PAID for software and support, the whole point of this discussion is to implement this directly on LR, so we, the PAYING users don't have to waste time doing a useless process that could be EASILY AVOIDED ig Adobe released updates as they are needed, or if they OPENED THE SOURCE CODE so the community could do it.
    Adobe created DNG, which is a well-documented backwards-compatible format, which is free for any manufacturer to use.
    See here for manufacturers who do (it's an old list, but you get the idea):
    http://www.barrypearson.co.uk/articles/dng/products_cameras.htm
    - Really? Did you actually read the site? It has PRECIOUS information that illustrate my point: Adobe DNG is an attempt to stop the OpenSource community from achieving the goals of OpenRaw, which is TRUE OPENNESS, Again, Adobe is trying to get manufacturers to PAY LICENSING so they use a PROPRIETARY FORMAT that will HOLD CUSTOMERS on a PAID platform. OpenRaw is he answer for a true competitive environment.
    Ask yourself why other manufacturers don't use a documented backwards-compatible format.
    - Easy, because they are lazy and want kick-back. The SAME answer that I (and the entire OS community) would give if you asked about Acrobat or MS Office.
    If you use a particular piece of software as your main tool, and you buy a camera which isn't yet supported by it, it's your problem. There is an expression used in the industry:
    "Poor Planning on your part does not constitute an Emergency on my part."
    - I agree here, it's MY PROBLEM that I decided to have a better product, it was my choice. I can still use OS Tools, which will be what I do moving forward, and about that expression, that is EXACTLY why Adobe will keep loosing customers, because the sense of urgency to help who pays their bills is inexistent. You are correct, why should they rush something so simple to help a customer right? Screw the customer... Thanks for making my point...

  • I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

    I bought a Nikon D810 and the RAW files will not open in Photoshop 6. Can anyone help me?

    You're welcome!  It's usually CS5 and below that has the ACR update problems.
    What counts is that you are back in business.
    Gene

  • Adobe Photoshop Elements 6 will not open photo files

    Adobe Photoshop Elements 6 will not open photo files

    You are rude, to say the least.  It is adobe's fault for marketing it as compatible.  Yet another reason why I want nothing to do with adobe.  The fact they marketed it as compatible when it is not is what I have a problem with.  I am not blaming the software, I am blaming the company.
    Please note: message attached
    From: MichaelKazlow <[email protected]>
    To: theieren <email adress removed by host>
    Subject: Re: photoshop elements 6 will not open! photoshop elements 6 will not open!
    Date: Mon, 02 Jan 2012 13:22:31 -0700

  • .psd files dose not open with Camera Raw

    I noticed that if you have a ".psd" file  even if it is Flatten, it will not open in camera raw. I can easily save it to a Tiff or other formats and open it in camera raw, but I wonder why .psd file dose not open in camera raw
    Thanks

    Yes, Trevor, you can indeed opened a non-layered PSD in Adobe Camera Raw—at least in perpetual-license CS6 and earlier, I don't know about the Cash Cow subscription version 14.x which I'm not going anywhere near.
    What you cannot do is open a PSD in Camera Raw by double clicking on it.  You just have to go through  File > Open menu item and its dialog box.
    Once you are in the Open dialog box, select the PSD file you want to open, go to the File Format button on the lower left-hand corner of said dialog box and from the list of formats available in the pop-up menu choose Camera Raw.  The Open button on the lower right will become active and you can then open your file in Adobe Camera Raw.
    Just be sure not to choose the "Photoshop Raw" format from that list of formats in the pop-up menu. "Photoshop Raw" has nothing to do with digital photography at all; it's an ancient, obsolete file format that no one should be using these days.

  • Some Canon CR2 RAW Files Will Not Open In Elements 8

    I use a Canon 7D DSLR.  Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
    Some files still open others do not.  I can think of only one thing.  I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
    The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
    Any ideas why this would happen?  I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
    I appreciate any guidance in this matter.  Needless to say I am resetting my camera back to Large RAW files only.
    Alex

    ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
    http://www.adobe.com/downloads/updates/
    sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
    Here is technical information on the reduce-sized RAWs:
    http://lclevy.free.fr/cr2/#sraw

  • Photoshop Elements 7 will not open

    Photoshop Elements 7 will not open.  Indicates an error message upon trying to
    open application in Windows Vista.

    Can you try some of teh trubleshooting steps at this link http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm.
    Also try this once:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to c:\Program Files\Adobe\Photoshop Elements  9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works. Let me know your comments.
    Thanks,
    Garry

  • Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes.  What do I do?

    Help.  Photoshop Elements 10 will not open.  I get Error message that says "Runtime Error!" and closes. What do I do?  What does it mean?  I bought Elements 10 at a retail store.  It did work for a while.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • PDF files will not open in a Safari (v 6.0.5) browser window

    PDF files will not open in a Safari (v 6.0.5) browser window, OS 10.8.5. Version 11.0.04 Adobe Reader and Plug-ins installed. Both local and internet files do not load. What is happening here?

    Ok. I reloaded v 11.0.04 of Adobe Reader after quiting Safari 6.0.5 . Then deleted the 2 plug-ins AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin . Relaunched Safari and tried to read a pdf from a repository at the URL mentioned in post 10 . The file was loaded and displayed correctly. Also a pdf file from my local disk store displayed nicely as well. What I do not understand is that there is no listing of an Adobe plug in /Library/Internet Plug-Ins , nor does Safari list any Adobe plug ins. So in that case this means that plug-ins for the display of pdfs in Safari windows are no longer needed!
    Adobe Reader version 11.0.04  is now working for me.
    Thanks for the help and the solution C.F.McBlob

  • Pdf and vector files will not open in Adobe Illustrator after Yosemite Update

    I updated my OS on recommendation from apple. Pdf and vector files will not open in adobe illustrator now. Am i using the latest OS?

    Linda Feltner wrote:
    > I cannot import or open vector files in Freehand 10. I
    just get large
    > Xs instead of the image. I have a MAC OS 10.3.9,
    Freehand 10. I'm
    > trying to import some small files that are either .ai or
    .eps files
    > (all are vector) that open fine in Illustrator 10 (so I
    know they
    > work), but I can't use them in that program. I've tried
    adjusting in
    > Freehand Preferences the 'convert editable EPS files" ,
    on and off. I
    > tried adjusting the 'Embed...." selection on and off.
    Can anyone tell
    > me what thing I'm doing wrong. I have two files, they
    are map
    > boundaries, that need to scale and adjust their color
    and line width
    > over an aerial map. This can't be difficult, but I must
    be
    > overlooking something. Many thanks in advance. Linda
    >
    Freehand can't convert EPS files into editable vectors. I
    usually run
    EPS files through Illustrator and then into Frehand. If you
    don't have
    Illustrator you can convert the EPS into a PDF and that
    Freehand will
    sometimes convert into editable vectors (though it does
    involve a lot
    more clean up than going through Illustrator.)

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

Maybe you are looking for

  • How to get the GTRID in string form

    Hello, I would like to include the Global Transaction Identifier (GTRID) in my application level logs. Preferrably it will be in the same format as it is in the ULOG. Is there a function to get the GTRID? Once retrieved, is there a function to conver

  • Create View  with Force and No Force

    Can Anyone Tell me how to create view with force and no force i have very little idea about this

  • Magic Mouse + Win 7 64-bit.

    Hello, I have a old Microsoft Wireless Laser Mouse 8000 that is on its final days. I was wondering if a Magic Mouse would be a good replacement. Does it work fully with Win 7? If not, are there some 3rd party drivers that will make it work 100%? Than

  • Can i eligibal for Microsoft MVP ,contributing since last three year on various forums

    Can i eligible for Microsoft MVP ,contributing since last three year on various forums,my questions are what are the Dates when I apply for MVP ? I am contributing since last three year on various forums. I am actively contributing on http://www.c-sh

  • Manually dispatching a keyboard tab event on a form does not work

    Hi, I am trying to solve the following issue: I have a form that is sitting on a TitleWindow. This is a popup window. I have a TextInput field. After clicking on the TextInput field when I try to paste something on it, nothing happens the first time