Photoshop Touch crashes after using adjusments for the second time
I am having a similar problem. When I select a portion of an image, then try and make some adjustments, it crashes on the second adjustment. Specifically, I used the selection tool, then selected the inverse on the selection. When I tried to change the saturation after adjusting the brightness, it crashed.
It did this on several different images and after clearing the ran and resetting the phone. It is really irritating because I have not been able to save one image so far because it has crashed every time.
I am using the scribble selection tool to isolate a a person in a photo. Then I inverse the selection and desaturate - and I have tried just using the black and white adjustment - the rest of the photo. The problem comes when I inverse back to the person and try to adjust the selection. I can usually do one adjustment, then it crashes on the second adjustment. It has crashed everyone I have tried a this with different images and after resetting my phone
My ram was about a gb when this last happened. I am using a galaxy note 2.
Similar Messages
-
Unwanted query execution after Find page for the second time
My uix page comes find mode. After user inputs the criteria and clicks the find button, related rows comes. That is ok.
But, if user not input critera then press the menu button or if user clicks new row then cancel adding new row by pressing menu button, All rows in db table queried and first ten rows are displayed. How can I avoid this action? dont want to query all rows.
Thanks for your interests.
GokhanTo go production with a JHeadstart application you need a license anyway. The free download from OTN is an evaluation copy, and not intended for use with production applications. So, if you cannot have 10.1.2.1., you cannot have you system go into production ......
Steven Davelaar,
JHeadstart Team. -
Photoshop Touch crashes after selecting "Wrap" tool for the second time
As title says, when selecting "wrap" tool for the second time, Photoshop Touch crashes. It doesn't matter which images and even after reboot and clearing all the RAM, it constantly crashes only when selected for the second time. I'm using this on Galaxy Note 2 so it really shouldn't have issues with RAM or Processing power. I'm not quite sure about other tools but it should be looked into and hopefully more stable version will be release soon!
Thank you
Device: SGH-T889 T-Mobile Galaxy Note 2Hi,
We just released an update that should take care of that issue.
thanks,
Ignacio -
My problem started after installing "smartsync app" which is supposed to sync my phone with the profilepage photos of my friends in facebook. All my apps crashed after using them for awhile.While using my apps, they will black out after a little while and the phone returns to the starting page. I have removed the smartsync app but my phone still behaves the same way. At the same time the dates that accompany my messages changed to another language. How can these be rectified?
Eek. Sounds like something in the app caused some serious software issues. You can try a hard reset, but I'd imagine you're probably going to have to do an iTunes restore to get it running right again.
-
After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.
reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Problem while refreshing the data for the second time using excel services in sharepoint 2013...
Hi,
I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
below find the flow of refresh
First Refresh
On Click of refresh open the workbook with excel services and return the session id.
Using that session I am invoking RefrehAsync method of excel services
After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
Now I am able to see the data
Second Refresh
After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
This time my formulas are not getting calculated because of that I am not able to see the data.
Could you please let me know that am I missing anything here?
Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
Thanks,
Meenakshi Nagpal
N.MeenakshiI am able to see the data for the second refresh if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
Please help me asap.
Thanks,
Meenakshi Nagpal
N.Meenakshi -
I have restored my iphone 5 for the second time today, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do? I deleted some apps I had recently installed, even changed the background refresh. What else?
Well... it said iPhone Recovery Mode, and I pressed 'Restore iPhone' after which it asked me if I am sure that I want to restore the phone to factory settings, I pressed 'yes'. After 20-30min it eventually came to the 'Hello' page where I had to sign in with my Apple ID, and then saw the icons of each of my apps. which one by one turned from grey to their full colour as they downloaded one by one. After 1-2 hours of having completed all the app downloads, I found the phone shut and could not turn it on with the normal way. And this happened after 2 restore sessions. Is there something I need to do, or I need to request a replacement. I have had the phone for 11months, and crushing problems begun on the 13 of Nov, which was a few days after I updated to iOS7. But today is already 48hours since I have not been able to use my iPhone properly.
-
My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
Is there a fix or is this the straw that forces a switch to Lightroom?Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made. That information is camera-vendor proprietary.
Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set. If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
Aperture provides a starting point. Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render. In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in. Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image. If you want adjustments in a different direction, you can create a preset and set it at import.
The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that." It's, unfortunately, impossible to do. -
Hi,
I have written a routine which will call the FM SD_ORDER_CREDIT_CHECK whenever there is a rejection and again unrejection of a same sales order, we are only concerned about already credit released sales orders, the scenario is as follow
1). Sales order created in the system --> Credit check --> Credit blocked
2). Release credit block manually CMGST =D
3). Reject sales order then unreject the same
4) Routine will determine rejection and unrejection of the order while saving and will call the FM SD_ORDER_CREDIT_CHECK
5) The order is credit checked and blocked if necessary
All goes well till this point
but when the same sales order is rejeceted and unrejected multiple times either partially/ fully then the Custom routine calls the FM for credit check but the FM fails to put the order back on credit hold
in short the FM works only for the first time incase of mutiple rejection and unrejection of teh same sales order then the FM SD_ORDER_CREDIT_CHECK fails to put the order back on credit hold from the second time onwards
if some one any idea of the behavior of this FM please share your thoughts and inputs . thanks !!Issue resolved
The Standard FM “SD_ORDER_CREDIT _CHECK” uses the field “Release date of the document determined by credit management VBAK – CMFRE”
For any sales order that is manually credit released in a single day, Only one credit check is triggered (per day) if there is any change in the sales order and then the order goes back to credit hold and if again the order is manually credit released for the second time in a single day there will be no credit check (still the order will pass into FM but the update entry in the internal table will be blank)this is a standard functionality
Process of rejection and unrejection :
Blocked order -->released-->blocked again (first time after manual release same day) unrejected (same day) -->but no credit check (all this in a single day)
note : OVA8 - released document still unchecked = 0 Days , Deviation %= blank -
after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.
My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...
-
I have bought an iPhone4 and to be able to use it for the first time I connected into a friends' itunes. Now when I want to buy itunes stuff on the phone it asks me her password. How can I set up again my itunes account?
Now I also have a macbook where I can sync my iphone but it doesn't allow mefirst of all only sync it with 1 computers itune account
second settings->general->store click the appleID box with her appleID in it and log out -
Using dbms_job for the 1st time
I am attempting to use dbms_job for the 1st time and doing some test, but I can't get it to run.
Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 1 10:36:18 2006
I have alter system set job_queue_interval = 10;
When I tried
SQL> alter system set job_queue_interval = 10;
alter system set job_queue_interval = 10
ERROR at line 1:
ORA-25138: JOB_QUEUE_INTERVAL initialization parameter has been made obsolete
my code is as below.
1 create or replace procedure d1 is
2 v_job_no binary_integer;
3 begin
4 DBMS_JOB.SUBMIT(
5 v_job_no,
6 'test_dbms_job',
7 trunc(sysdate,'hh')+1/24,
8 'trunc(sysdate,''hh'')+2/24');
9 commit;
10* end;
SQL> /
Procedure created.
SQL> exec d1;
BEGIN d1; END;
ERROR at line 1:
ORA-06550: line 1, column 107:
PLS-00103: Encountered the symbol "END" when expecting one of the following:
:= . ( @ % ;
The symbol ";" was substituted for "END" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 79
ORA-06512: at "SYS.DBMS_JOB", line 136
ORA-06512: at "PMC_ERP_PROD.D1", line 4
ORA-06512: at line 1
Any clues??sorry, when I cut and pasted this I but in
job_queue_interval in twice.
I alredy have the following set also.
SQL> alter system set job_queue_processes = 4;
System altered.Well, it's good...
And what about semicolon ? ;-) -
Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?
Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
About receiving my credit card being debited for Free App Store Application downloads,
It should be within a few days, but it might vary a bit by bank/provider :
I am in India, if the bank don't refunds , what to do?
Rajagopal.pngr :- It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple. -
Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.
Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara -
I use ical for the first time, how do you update the programm without updating for 2 hours all other programms
From the iCal Help Menu in the Tool Bar...
Changing or deleting an event
You can change the time, day, alarm, or any other settings for any events you’ve created, or you can delete an event.
You can’t change the events on a calendar you’ve subscribed to (subscribed calendars appear in your Calendar list under the heading “Subscriptions”), and you can only change the calendar, status, and alarms for events you’ve been invited to.
To change or delete an event:
To change the time or day of an event you’ve created, drag the event to the new time or day in the main calendar view.
To change an event’s duration, drag the event’s top or bottom edge. (You can resize events only in Day or Week view.) If the event is an all-day event, in Week view, drag the left or right side of it.
To change the name of an event, double-click it. If necessary, click Edit to open the event editor. Select the event name, type a new name, and then click Done. (You can also change the name of an event without opening the event editor by holding down the Option key while you double-click the event name.)
To edit other characteristics of an event (for example, how often it repeats or whether it has an alarm), double-click the event. If necessary, click Edit to open the event editor. Make your changes.
To delete an event, select the event and press the Delete key on your keyboard.
If you’re changing an event to which you’ve invited other people, you need to send an updated event to the invitees by clicking Send in the event editor
Maybe you are looking for
-
MySQL Database Connection (two databases at the same time)
I have never had to open more than one MySQL database from within the same website before, but I do now. The website I have is designed where all the content comes from within the main database. I am building an Inventory system that I want within
-
Firefox 3.6.8 still having problems loading heavy Flash websites
Upgraded to latest 3.6.8 Firefox version and noting it is still having issues loading heavy flash websites. Takes 5 to 6 times longer to load a webpage if there is Flash on it. I do have the latest version of Flash installed according to Adobe's webs
-
How to add a Custom field in the Standard SAP Sales Order main screen
Dear Experts, We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone te
-
Songs not in correct folder--how do I get them there???
Hello all, I saved, for gods know why,all my songs to a music folder I created.I recently discovered that when you import a cd it automatically saves it to "itunes folder" in "my music" with a subfolder created for the artist eg AC/DC and then anothe
-
How do i print a pdf with markups made on an ipad?
I make markups, comments and pop out notes on a pdf from an ipad. How do I print that document with all the comments showing up??