Photostream has stopped updating since upgrading

Photostream still syncs across my iOS devices but has stopped on my OSX devices. I updated to the Photos app on the 16th April and my Mac Photostream hasn't updated since then. I'm not using iCloud Photo Library but My Photo Stream is enabled

Hi I wasn't too sure what you meant. This is what I see under the General tab

Similar Messages

  • Automator has stopped working since upgrade to snow leopard

    I frequently use Automator to scale groups of images, but since upgrading to 10.6.8 it will no longer work.  I can get files from folders, can copy and rename them, but scale does not work.  I get the message "The action "Scale Images" was not supplied with the required data."  I have tried a variety of image types to see if that was the problem, and tried with a single file that was re-scaled in a previous workflow.  I always get the same error message. 
    Any ideas?

    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My vga  cable has stopped working since upgrading my ipad2 to ios8 - why?

    I Use my ipad2 to give presentations via a projector or tv screen. When I updated to ios8 it stopped working. I get a message like"accessory not supported".
    The cable and presentations etc still works fine on my iPhone 4s which is still running ios7, so it can't be the cable.
    Just tried upgrading the ipad to ios 8.1.1 but it makes no difference.
    anybody know a fix?

    I just bought a dock connector to VGA cable so I could use my 3rd generation iPad with my Epson projector. My IPad shows up through my projector for a few seconds then I get that same message on my iPad that my cable is not supported by this iPad. Your post gave me some answers. it must be that latest big OS upgrade that caused that. Now Apple needs to fix that.

  • Optical Drive has stopped working since upgrading to ATI 9800

    Due to hardware failure of my ATI Radeon 9600 I decided to upgrade to the 9800, which requires (in G5's) a four pin split power supply to be connected to the optical drive.
    I have turned my computer on and successfully receive signal out to my monitors, but thus discovered I can't eject the disk tray!
    I opened up the computer again and all the connection seem fine.....
    Is anyone familiar with installing the 9800?
    G5 (duel 2.0 Ghz)   Mac OS X (10.4.9)   1GB RAM

    Thanks for both your responses.
    I am going to restore the system with the other video card and try to get things back to normal, but I did a few more troubleshoots.
    The optical drive seems to be functioning. I started up my computer with the side panel opened and I moved the drive a few inches out in order to press the manual eject button. I was able to open the drive bay and close it by pressing the eject button on my keyboard. (That is the first time the keyboard worked.)
    I closed the drive bay with an installer CD in it but the CD wouldn't read. I restarted holding the C key down to try and boot off the CD drive- nothing. So I guess the drive isn't working....but yet it seems to be powered????
    Do you think this is really only a bad cable? When installing the new Video Card I had a very hard time detaching the 4 pin power supply from the optical drive. Could I have damaged something?
    It wouldn't surprise me if now my optical drive was broken. I have had to replace everything on my computer since it reached three years old.
    G5 Mac OS X (10.4.9) 1GB RAM

  • Microphone has stopped working since upgrade

    Microphone doesn't work since os upgrade. It will work, though, when my earphones are plugged in. Any ideas?

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Optical drive on MacBook Pro has stopped working since upgrade to Mavericks

    I upgraded to Mac OSX 10.9 almost as soon as it was released, but I only discovered two days ago that any optical disk: CD/movie DVD, DL DVD etc that I insert in to my late 2008 MacBook Pro just spins up for a few seconds, then gets ejected.
    I really hope Apple have noticed this issue, because there are many other people reporting the same problem. I will have to consider reverting to Snow Leopard if a fix is not released soon.

    Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Printing from within iTunes has stopped working since my last iTunes update.

    Printing from within iTunes has stopped working since my last iTunes update. Using Toshiba Satellite Pro Windows 7 and HP printer.

    That's too bad.
    If/when help is truly desired, try providing some specifics of what is occurring, such as any errors that may occur when attempting to print and what specifically is attempting to be printed.

  • Face time has stopped working since update on iPad and iPhone

    My face time has stopped working since both my iPad 2 and iPhone 4S did their iOS 6.1 update. They just say that a connection cannot be made, or FaceTime unavailable. Both devices are sitting beside each other, both have excellent wifi. If you try to FaceTime one of the devices, it will ring once and then lose the connection. Apple account details are all fine, FaceTime is switched on, on both. Kind of lost and frustrated now

    Hey guys,
    So I also noticed a few weeks ago facetime stopped working on my iphone but was still working on my ipad2 and macbook pro.
    Phone - iphone 4
    os version - 6.1.3
    carrier - at&t 14.2
    location - usa
    I use the same apple id for all devices
    I searched online for a fix and/or troubleshooting help. I tried alot of the suggestions on this discussion as well as others but nothing seemed to work. Out of frustration, I finally reached out to apple tech support. I went through the entire trouble shooting steps with an apple technician and was even transferred to a senior advisor for additional help. We tried everything from resetting passwords, resetting icloud accounts, resetting phone settings, checking network settings, resetting date & time, resetting location, making sure push and multitasking functionalities were working properly, etc. We spent a couple hours troubleshooting trying everything but nothing worked. The apple tech said I would have to restore the os and if that didn't work, the only other thing to do would be to send in my phone. But he did stress that I had to restore as a NEW device.
    I backed up my phone using iclould and my computer (everything is synced) and restored as a new device. I tested facetime and it worked, however my phone was back to factory position which is not ideal. So I went to itunes and restored my most resent backup. I got all my phone contents back but FaceTime no longer worked. I called the apple senior advisor back and he said I would not be able to restore from a backup because there seemed to be an issue with it that prevented FaceTime from working properly. So I backed up what I could to itunes and iCloud then restored my phone as new. After the restore, it prompted me to install the carrier software update which I did. Then I used itunes to sync my music, apps, contacts, mail, videos, pics, etc. I did this yesterday and facetime has been working properly since then. However certain things I was not able to recover.
    So far, these are the things I noticed have been lost with the restore:
    - all my settings (everything went back to default/factory)
    - voicemail messages greater than 30 days old
    - all text and iMessages (but I still have copies of imessage conversations on my iPad and mac)
    - data stored within apps (you start fresh like when you first downloaded the app. some apps i have online accounts that sync but most apps the data is lost)
    - screen display configurations
    - notes that were only on phone and not synced with an email account
    Out of all my research, this has been the only thing to get facetime working again. But on the downside, it does take a lot of time to backup, restore, re-sync, and then set up my phone similarly to how I previously had things. The big thing for me was the loss of my apps data. I wish there was a way to restore that. But when all is said and done, I'm glad to have FaceTime back on my phone.
    If you are not quite ready to restore, check out this discussion for other suggestions you can try first:
    https://discussions.apple.com/thread/5163024?start=0&tstart=0
    I hope you guys find this useful.

  • Snapchat has stopped working since the update

    Snapchat has stopped working since the update, plus my phonebook still doesn't work after going in setting and clearing the data etc etc or running a repair???

    Sorry to hear that you have issues after the update-
    Have you tried to uninstall and then install the app again after the update? This may be needed with some apps when you update Android.
    Regarding contacts, please continue that discussion in the first thread: http://talk.sonymobile.com/t5/Xperia-Z2/phonebook-contacts-not-working-since-update/m-p/972365

  • HT1414 my top button has stopped working since the ios7 update can you help the shop said its not directly the button as its clicking properly

    my top button has stopped working since the ios7 update and the shop said the actual button is working ok does anybody have an answer for this

    i found out my prob!
    here is what you do.
    go to the "system preferences" on your dock.
    click "software updates".
    click "installed software"
    if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
    go to mail.
    click "mail" at the top.
    click "preferences...".
    find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
    hit the "+" (right next to the "-") and add your accout back!
    its something with that update that effected mail, i hope this works out for you, if not reply back

  • My home screen button has stopped working since updating to ios7 (iphone4)

    My home screen button has stopped working since updating to ios7 (iphone4)
    Originally i noticed that it was less responsive but now it does absolutely nothing.
    I have cleaned the button and also tried calibrating (opening an apple app, holding the power button and then the home button)
    Nothing has helped and I am forced to use assisted touch.
    Any help would be appreciated.
    Thanks,
    Craig.

    No advice? I suppose I could try sacrificing an android to the apple gods.....

  • My time capsule has stopped working since installing Yosemite. It says to wait to tell me how much longer but it stays that way for hours.

    My time machine has stopped working since I upgraded to Yosemite. It gets to the point that says it will estimate the time remaining, but it never gives me that answer and it just stays on that page and never completes it's backup. This is a brand new macpro, so I wanted to capture the previous info on my computer I was able to put my external hard drive on new computer and it did the migration and all my old info returned. However, two days later I wanted to do a backup using Time Machine with my Western Digital Mac external hard drive but it won't progress past saying how much time remaining, even after several hours of sitting there.

    You do need to wait a long time.. as it takes a long while for Yosemite to index the existing backup if it is large.
    Here is Apple's List of bad things that happen to TM in Yosemite.
    OS X Yosemite: Time Machine problems
    It is clearly no where near as comprehensive as it needs to be.
    I presume your disk has your old backup.. it may be better to keep the old backup.. save that for the future.. and get a new disk and start a fresh clean backup.
    I would also recommend using Carbon Copy Cloner or similar for the time being. Make a bootable clone backup of your drive to a new external drive.. it is really superior in lots of ways to Time Machine. And does show you what it is doing.
    For TM at least you can still use the widget so you have some log access to that TM does.
    A1 here. http://pondini.org/TM/Troubleshooting.html

  • Mail rss feed has stopped updating

    my RSS feed in Mail has stopped updating. The last updates were on August 10. Has anyone else experienced this problem?

    Same here for a couple of weeks now. Only thing that helps is restarting mail. As seen from all the complaints here, it is a random problem and is continuing for some time now. And i think there will be no help from Apple since they have decided in there wisdom to drop the RSS feeds in the mail app all together from the newer OSX versions. I'm on OSX 10.6.8.

  • ITunes stops updating podcasts / iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?

    Hi,
    My iTunes is set to automatically update podcasts and keep the last five episodes of each podcast.
    However, iTunes appears to stop updating podcasts after several (five?) unwatched episodes and gives me an exclamation mark in the podcast overview. Clicking on that, I get the message: "iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?"
    This is not what I intend... and not  what I  told iTunes to do... (at least this my reading of the below settings)
    This stopping is rather less then ideal: (1) if I am going away for two weeks, which I often do, I would still like to have the last five days of news, not the last five days of news back from the date I left, (2) I need to click update for approx. 20 podcast on regular basis, (3) my iPhone is synced to iTunes as soon as I come home, if iTunes does not have the podcasts downloaded, they are not copied over to the iPhone, and the iPhone will attempt to download the episodes via 3G next time I play the podcast on the go, (4) I am mainly using iTunes functions, such as smart playlists and podcasts, through another app (Plex, a fullscreen media player) and it is a pain to have to go to iTunes to manually do things. That is why this bothering me...
    How can I get iTunes to behave as intended? (From reading through old posts I know that there is a Doug script adressing this problem, which I have just set up, but I would prefer to use internal settings if possible... maybe I am just missing a setting)
    Thank you for your ideas!

    Thank you for the response, Roger!
    OK, that's how it is then.
    The iTunes podcasts settings should be reworded in that case because it suggest something different from what it does. And, of course, it would be ideal for Apple to make this more flexible and allow users to set up their podcast downloads in their way and not be so motherly (c'mon, Apple, your users are not as dumb as you think, and they have uncapped Internet connections these days anyway)...
    Btw., for anyone interested, this is external script I am using now:
    http://dougscripts.com/itunes/scripts/ss.php?sp=updateexpiredpodcasts
    Including the "cron job" setup here:
    http://dougscripts.com/itunes/2011/12/updated-update-expired-podcasts-v2-2-and-l aunchd-project/
    Cannot tell how well it works because I have just set it up, other members of the forum say it works for them...
    If anyone knows of in-app solutions, please share...

  • ITunes has stopped updating this podcast...

    I'm curious if anyone has a fix for this ACTUAL iTUNES MESSAGE:
    "iTunes has stopped updating this podcast becasue you have not listened to any episode recently. Would you like to resume updating this podcast?"
    It seems crazy to me that iTunes would just stop updating my podcasts because I haven't listened in a while. It would be just as ridiculous if Tivo stopped recording TV shows because I haven't watched them in a while. It doesnt mean I dont want to listen/watch in the future.
    APPLE: FIX THIS!

    Apple, count me as another user who wants you to do something different here. I would prefer to simply get a message that I haven't listened to a podcast in a while then not have it being downloaded. Especially now with advanced subscription settings that let us change the subscription on a per-podcast basis, this behavior should be changed. Maybe it's already in the queue?
    Suggested change:
    Just warn with option to stop warning, but always continue to download as per subscription settings.
    I have a number of podcasts that I'm "subscribed to" but I don't listen to as regularly as they are published. However when i'm going to hit the road, I want those episodes there, especially on my ipod. I don't want to have wait for them to all update!
    FYI for others reading this discussion; here is the Documentation:
    http://docs.info.apple.com/article.html?artnum=301872

Maybe you are looking for

  • No Longer Able to stream content to Xbox 360

    I have just installed Lion and can no longer stream media to my Xbox 360 using Rivet. I had no problems streaming them before, and am still able to stream the media on my 2TB NAS drive but it says the format is not supported on my Xbox when I try to

  • Tax calculation on sales order and invoice is different

    2007A, SP0, PL49 The tax on a sales order does not match the tax on the linked delivery and invoice by 1 cent. We take payment based on the sales order amount as the delivery and invoice are done after the fact. Why is the tax calculated differently

  • An error has occurred. Further information is available in the server log.

    I been trying for days to access Secondlife.com but when i do i get this message''An error has occurred. Further information is available in the server log. '' now i can use Chorme and firefox to go to the site but not firefox plus fireofx is searchi

  • Backgroun job, getting error message

    Hello , I am trying to run a report in background. In one server it is working fine, but in another server it is giving me error "450 columns too great for format X_65_255" line-size of report is 450. It is working fine in one 4.6c server but not in

  • Mass maintenance problem

    Hi all, I'd like to execute a mass copy for purchasing info records (transaction code: MEMASSIN). Comparing with another mass maintenance transaction such as XK99, why there is no mass creation for the info records? Is it configurable? Thanks