My vga cable has stopped working since upgrading my ipad2 to ios8 - why?

I Use my ipad2 to give presentations via a projector or tv screen. When I updated to ios8 it stopped working. I get a message like"accessory not supported".
The cable and presentations etc still works fine on my iPhone 4s which is still running ios7, so it can't be the cable.
Just tried upgrading the ipad to ios 8.1.1 but it makes no difference.
anybody know a fix?

I just bought a dock connector to VGA cable so I could use my 3rd generation iPad with my Epson projector. My IPad shows up through my projector for a few seconds then I get that same message on my iPad that my cable is not supported by this iPad. Your post gave me some answers. it must be that latest big OS upgrade that caused that. Now Apple needs to fix that.

Similar Messages

Automator has stopped working since upgrade to snow leopard

I frequently use Automator to scale groups of images, but since upgrading to 10.6.8 it will no longer work. I can get files from folders, can copy and rename them, but scale does not work. I get the message "The action "Scale Images" was not supplied with the required data." I have tried a variety of image types to see if that was the problem, and tried with a single file that was re-scaled in a previous workflow. I always get the same error message.
Any ideas?

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Microphone has stopped working since upgrade

Microphone doesn't work since os upgrade. It will work, though, when my earphones are plugged in. Any ideas?

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

Optical Drive has stopped working since upgrading to ATI 9800

Due to hardware failure of my ATI Radeon 9600 I decided to upgrade to the 9800, which requires (in G5's) a four pin split power supply to be connected to the optical drive.
I have turned my computer on and successfully receive signal out to my monitors, but thus discovered I can't eject the disk tray!
I opened up the computer again and all the connection seem fine.....
Is anyone familiar with installing the 9800?
G5 (duel 2.0 Ghz) Mac OS X (10.4.9) 1GB RAM

Thanks for both your responses.
I am going to restore the system with the other video card and try to get things back to normal, but I did a few more troubleshoots.
The optical drive seems to be functioning. I started up my computer with the side panel opened and I moved the drive a few inches out in order to press the manual eject button. I was able to open the drive bay and close it by pressing the eject button on my keyboard. (That is the first time the keyboard worked.)
I closed the drive bay with an installer CD in it but the CD wouldn't read. I restarted holding the C key down to try and boot off the CD drive- nothing. So I guess the drive isn't working....but yet it seems to be powered????
Do you think this is really only a bad cable? When installing the new Video Card I had a very hard time detaching the 4 pin power supply from the optical drive. Could I have damaged something?
It wouldn't surprise me if now my optical drive was broken. I have had to replace everything on my computer since it reached three years old.
G5 Mac OS X (10.4.9) 1GB RAM

Mirroring with hdmi cable has stopped working since 6.1.2

Any advice? I have the 30 pin to hdmi cable I use to mirror my 4s. Since 6.1.2 the phones top bar no longer flashes blue when connected and will not mirror on to the tv. It dose know its conected to a dock of some kind as the volume slider becomes unavailable. Am I missing something in settings or is this a glitch?

Please try the options here: http://mzl.la/LIoF7y
I would first try completely uninstalling flash and then reinstalling the latest version.
I am also using Firefox 21 and Windows 7 with the latest version of Flash; I am having no problems so I think that there is likely to be a specific issue in your configuration, once we fix it everything should work fine.

Optical drive on MacBook Pro has stopped working since upgrade to Mavericks

I upgraded to Mac OSX 10.9 almost as soon as it was released, but I only discovered two days ago that any optical disk: CD/movie DVD, DL DVD etc that I insert in to my late 2008 MacBook Pro just spins up for a few seconds, then gets ejected.
I really hope Apple have noticed this issue, because there are many other people reporting the same problem. I will have to consider reverting to Snow Leopard if a fix is not released soon.

Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

HT5278 since I have loaded the update, my TIme Warner cable has stopped working. It gets stuck at launch.

SinceI have loaded the update, 5.1.1 my TIme Warner cable has stopped working. It gets stuck at launch all I see is the logo of TWC. I have reinstalled it, rebooted my IPAD.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My time capsule has stopped working since installing Yosemite. It says to wait to tell me how much longer but it stays that way for hours.

My time machine has stopped working since I upgraded to Yosemite. It gets to the point that says it will estimate the time remaining, but it never gives me that answer and it just stays on that page and never completes it's backup. This is a brand new macpro, so I wanted to capture the previous info on my computer I was able to put my external hard drive on new computer and it did the migration and all my old info returned. However, two days later I wanted to do a backup using Time Machine with my Western Digital Mac external hard drive but it won't progress past saying how much time remaining, even after several hours of sitting there.

You do need to wait a long time.. as it takes a long while for Yosemite to index the existing backup if it is large.
Here is Apple's List of bad things that happen to TM in Yosemite.
OS X Yosemite: Time Machine problems
It is clearly no where near as comprehensive as it needs to be.
I presume your disk has your old backup.. it may be better to keep the old backup.. save that for the future.. and get a new disk and start a fresh clean backup.
I would also recommend using Carbon Copy Cloner or similar for the time being. Make a bootable clone backup of your drive to a new external drive.. it is really superior in lots of ways to Time Machine. And does show you what it is doing.
For TM at least you can still use the widget so you have some log access to that TM does.
A1 here. http://pondini.org/TM/Troubleshooting.html

Printing from within iTunes has stopped working since my last iTunes update.

Printing from within iTunes has stopped working since my last iTunes update. Using Toshiba Satellite Pro Windows 7 and HP printer.

That's too bad.
If/when help is truly desired, try providing some specifics of what is occurring, such as any errors that may occur when attempting to print and what specifically is attempting to be printed.

Face time has stopped working since update on iPad and iPhone

My face time has stopped working since both my iPad 2 and iPhone 4S did their iOS 6.1 update. They just say that a connection cannot be made, or FaceTime unavailable. Both devices are sitting beside each other, both have excellent wifi. If you try to FaceTime one of the devices, it will ring once and then lose the connection. Apple account details are all fine, FaceTime is switched on, on both. Kind of lost and frustrated now

Hey guys,
So I also noticed a few weeks ago facetime stopped working on my iphone but was still working on my ipad2 and macbook pro.
Phone - iphone 4
os version - 6.1.3
carrier - at&t 14.2
location - usa
I use the same apple id for all devices
I searched online for a fix and/or troubleshooting help. I tried alot of the suggestions on this discussion as well as others but nothing seemed to work. Out of frustration, I finally reached out to apple tech support. I went through the entire trouble shooting steps with an apple technician and was even transferred to a senior advisor for additional help. We tried everything from resetting passwords, resetting icloud accounts, resetting phone settings, checking network settings, resetting date & time, resetting location, making sure push and multitasking functionalities were working properly, etc. We spent a couple hours troubleshooting trying everything but nothing worked. The apple tech said I would have to restore the os and if that didn't work, the only other thing to do would be to send in my phone. But he did stress that I had to restore as a NEW device.
I backed up my phone using iclould and my computer (everything is synced) and restored as a new device. I tested facetime and it worked, however my phone was back to factory position which is not ideal. So I went to itunes and restored my most resent backup. I got all my phone contents back but FaceTime no longer worked. I called the apple senior advisor back and he said I would not be able to restore from a backup because there seemed to be an issue with it that prevented FaceTime from working properly. So I backed up what I could to itunes and iCloud then restored my phone as new. After the restore, it prompted me to install the carrier software update which I did. Then I used itunes to sync my music, apps, contacts, mail, videos, pics, etc. I did this yesterday and facetime has been working properly since then. However certain things I was not able to recover.
So far, these are the things I noticed have been lost with the restore:
- all my settings (everything went back to default/factory)
- voicemail messages greater than 30 days old
- all text and iMessages (but I still have copies of imessage conversations on my iPad and mac)
- data stored within apps (you start fresh like when you first downloaded the app. some apps i have online accounts that sync but most apps the data is lost)
- screen display configurations
- notes that were only on phone and not synced with an email account
Out of all my research, this has been the only thing to get facetime working again. But on the downside, it does take a lot of time to backup, restore, re-sync, and then set up my phone similarly to how I previously had things. The big thing for me was the loss of my apps data. I wish there was a way to restore that. But when all is said and done, I'm glad to have FaceTime back on my phone.
If you are not quite ready to restore, check out this discussion for other suggestions you can try first:
https://discussions.apple.com/thread/5163024?start=0&tstart=0
I hope you guys find this useful.

Snapchat has stopped working since the update

Snapchat has stopped working since the update, plus my phonebook still doesn't work after going in setting and clearing the data etc etc or running a repair???

Sorry to hear that you have issues after the update-
Have you tried to uninstall and then install the app again after the update? This may be needed with some apps when you update Android.
Regarding contacts, please continue that discussion in the first thread: http://talk.sonymobile.com/t5/Xperia-Z2/phonebook-contacts-not-working-since-update/m-p/972365

HT1414 my top button has stopped working since the ios7 update can you help the shop said its not directly the button as its clicking properly

my top button has stopped working since the ios7 update and the shop said the actual button is working ok does anybody have an answer for this

i found out my prob!
here is what you do.
go to the "system preferences" on your dock.
click "software updates".
click "installed software"
if it shows something about a recent update about "EFI UPDATE, FIRMWARE, THUNDERBOLT" or anything like that, exit out of it.
go to mail.
click "mail" at the top.
click "preferences...".
find the account you are having trouble with, once you do, make sure its highlighted, then click the "-" at the bottom of the window (this will only effect that mail account, it will not effect your ical weather or not its synced thought that email account)
hit the "+" (right next to the "-") and add your accout back!
its something with that update that effected mail, i hope this works out for you, if not reply back

My home screen button has stopped working since updating to ios7 (iphone4)

My home screen button has stopped working since updating to ios7 (iphone4)
Originally i noticed that it was less responsive but now it does absolutely nothing.
I have cleaned the button and also tried calibrating (opening an apple app, holding the power button and then the home button)
Nothing has helped and I am forced to use assisted touch.
Any help would be appreciated.
Thanks,
Craig.

No advice? I suppose I could try sacrificing an android to the apple gods.....

ITunes has stopped working after upgrading to latest version.......

I recently upgraded my iTunes software but ever since I did that, I keep getting an error message that says, "iTunes has stopped working". I have included the info from the error. I am using Windows 7 64-Bit. I hope someone can help me with this. I miss my iTunes.
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.2.0.34
Application Timestamp: 4d6dd34e
Fault Module Name: icuuc40.dll
Fault Module Version: 4.0.0.3207
Fault Module Timestamp: 4d3b6a8e
Exception Offset: 00073335
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional Information 1: e043
Additional Information 2: e0436f8e95924b8cc03f3b6e8fbccbe6
Additional Information 3: 3521
Additional Information 4: 352153d1c7a000354229557e718745c3
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi and welcome to Apple Discussions, KLH.
There are a few threads discussing this issue, including this one -> http://discussions.apple.com/thread.jspa?threadID=2771714
That thread and a few others mention downloading the DLL from another site. Heres a direct link to the workaround/fix -> http://discussions.apple.com/messageview.jspa?messageID=13162938&stqc=true
Also, there was a few posts asking what time zone people are in. What timezone are you in and is the computer updated?
WTH.

My ipod has stopped working since the laptop turned off during synching.it shows no music and wont play games also is slower,constantly resets and freezes itunes when connected to computer.if i switch it off a spinning wheel appears till batt dies.help?

My Ipod has stopped working properly since the laptop shut down during synching.
My ipod is being slower and wont show any music. when I go into general settings it says the music and videos are loading..
It wont let me into settings all of the time either.
My applications and games have become slow or unresponsive.
The ipod keeps resetting itself, I have tried resetting it to no avail.
I tried plugging it into itunes but it freezes itunes and wont show up on my computer.
When I switch off the ipod it shows a spinning wheel until the battery dies, which could be nearly 2 hours!!
does anyone have any advice as to what to do?
currently ive reset it - nothing has happened
ive let the battery drain itself then recharged it to see if that would make a difference - no difference
Help ASAP needed

Try restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.
If still problem make an appointment at the Genius Bar of an Apple store. If your iPod is with in the one-year warrranty, not abused and defective Apple will replace it.

My vga cable has stopped working since upgrading my ipad2 to ios8 - why?

Similar Messages

Maybe you are looking for