PhotoStream: Multiple Devices and Performance Issues

Had a bad night last night with PhotoStream. I have an iPhone 4S (AT&T), my wife has an iPhone 4 (VZW), we have an iPad 1 (Wi-Fi), Apple TV 2 (Ethernet), and a 2011 Mac Mini (Wi-Fi)... all in the same house that has a Time Capsule and is connected to AT&T DSL service, 3.0Mbps service (average speed test results are 2.65Mbps down, 315kbps up). Oh yeah, there's a micro-cell in there too but anytime there's trouble that gets shut off first so its irrelevant for this discussion.
So yesterday was Halloween and we both took alot of photos away from the house with the iPhones. Got home, started using the internet, noticed the performance was HORRIBLE. Speed test showed over 1,000 ms ping latency (I still can't believe I actually waited for it to finish the ping test) and nothing was getting through for the download / upload test. I have never (believe it or not) with AT&T DSL seen it get this bad. Its been bad before, don't get me wrong, but this was surprising even to me.
How did I come to the conclusion that PhotoStream was my issue you may ask? Well, its sort of a long story, but bear with me... The other day, we started having trouble with the Apple TV 2, which for the most part is pretty solid. My wife was streaming Netflix movies and it was stopping every 30 seconds. It was looking at this issue that had me first raise suspicions about PhotoStream. Just days before this problem started, I had enabled PhotoStream on the Apple TV 2. SO I did the first most logical thing anyone could do, I took a step back and disabled it. Problem solved. Thought nothing of it, yeah I was a little discouraged that I couldn't use it on the Apple TV 2, but not a big deal, my favorite part of PhotoStream is using it to get the photos into iPhoto without having to plug the iPhones in so I said to myself "I'll just keep putting the photos into Events and Albums until they work out the kinks on the AppleTV 2" thinking perhaps the Apple TV 2 needs to not update PhotoStream while videos are being played. They can fix that at some point, right? Sure they can.
Now, back to this other issue. My bandwidth last night was completely crapped out, and I was determined to prestige on Black Ops one last time so this had to change STAT! I mean, come on! I was at Level 47 and I was ready to GO! My internet connection just wasn't having it. I powered off the router, rebooted the modem, and powered on the rotuer again. Everything came up beautifully. I jumped into some Nuketown 24/7, 4 green bars next to my name and I was happy. After we lost Bravo, which on Nuketown takes about a minute and a half if both teams are fighting over it, I'm lagging like crazy and I have that little red bar that no one likes to see next to my name. Sure enough, speedtest results are all whacked out again.
So I'm sitting there thinking to myself, what could this be? My wife was watching cable TV, my son was asleep... essentially the Xbox 360 was the only thing trying to use the internet... I thought... until I remembered our iPhones and the photos we had just taken and all the devices that would be simultaneously trying to update PhotoStream. Let's list them again, shall we?
iPhone 4S - Upload to Stream and Download from Stream
iPhone 4 - Upload to Stream and Download from Stream
iPad 1 - Download from Stream
Mac Mini - Download from Stream
So how can I prove this crazy theory of mine that the great and wonderful PhotoStream was choking my internet connection? Simple.
iPhone 4S - PhotoStream OFF
iPhone 4 - PhotoStream OFF
iPad 1 - PhotoStream OFF
Mac Mini - PhotoStream OFF
Speed test results immediately after doing this?
2.73Mbps down / .31Mbps up with 26ms ping time (used the Speedtest.NET app on the 4S).
Sadly, this means that for now, I cannot use PhotoStream, however I did manage to Prestige on Black Ops which made me happy, and the iPhone 4S can still be plugged into the Mac Mini to download my wonderful looking photos.
That's right, I didn't throw away the charger cables just yet and if you want to start talking about iTunes Wireless Synching with multiple devices in the same house, I can gladly take up some more of your time. Thats right, its OFF as well!

I just wanted to report that this is still an open and particularly nefarious bug. I've got a fairly idealized Apple household with 2 iPhone 4's, a 'new' iPad, a 13" Macbook Pro, Airport Express and our most recent addition this weekend... an Apple TV.
While I had no particular interest in enabling Photo Stream, I turned it on while messing with the screen saver settings and didn't think anything about it. As I began to play with my new toy I was immediately disappointed with all the long spinners and timeouts in Netflix. Later that day I noticed my computer and iPad were having similar connection issues. My first thought was 'oh, Comcast must be acting up, that's why my new Apple TV isn't working so well'.
Fast forward 3 days to today and our network issues were still occuring and I decided I needed to figure out what was going on. After mucking around in network settings for a couple hours I half-jokingly decided to disconnect the AppleTV on the whim that the issues started at the same time I hooked it up. Sure enough my network issues disappeared. I even went so far as to run continuous pings to various IP's outside my home network and watch the timeouts come & go as i plugged/unplugged my ATV. Now knowing the ATV was the problem I set out to figure out what in particular was causing it. As soon as I signed out of Photo Stream everything was working perfect again. Netflix on the ATV is quick & responsive, no more spinners or timeouts. My other devices aren't plagued with random disconnects, dns failures or slow downloads.
Long story short, something is bugged in AppleTV's Photo Stream support. Mine didn't appear to be downloading any new photos, it had stopped with 255 photos downloaded. Not sure if that was all I had in iCloud or maybe AppleTV can only pull down 255 max? Maybe 255 is the magic number where it hits the bug that causes this behavior? Either way, it appeared to be only affecting the outgoing internet connection, when I had a continous ping going to another machine on my internal LAN it didn't appear to get affected.
Hope this helps someone at Apple track down the bug. While someone technical can probably troubleshoot these issues I could see someone like my mom never putting the 2 + 2 together that her internet problems started around the time she enabled Photo Stream on her AppleTV and instead blaming it on 'the internet acting up again' and of course calling me months later to look into it for her.

Similar Messages

TS3367 We have one Apple I'd and multiple devices, and are not getting FaceTime to work between the devices on the same id

We have one apple I'd with multiple devices and FaceTime will not work between them?

Put separate email addresses (free gmail) on each device.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Cache and performance issue in browsing SSAS cube using Excel for first time

Hello Group Members,
I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
Best Regards, Arka Mitra.

Thanks Richard and Charlie,
We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
first time after daily cube refresh.
Guys,
This is what we have done:
We have 4 cube databases and each cube db has 1-8 cubes.
1. We are doing daily cube refresh using SQL jobs as follows:
<Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<Object>
<DatabaseID>FINANCE CUBES</DatabaseID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>
2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
CREATE CACHE FOR [Profit Analysis] AS
{[Measures].members}
*[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
GO
I will update the post after I receive the actual im[provement from UAT/ Production environment.
Best Regards, Arka Mitra.

One computer, one iTunes account, multiple devices and iCloud accounts, help!

We have a family MacBook and have always held a single iTunes account. We have multiple devices (iTunes Match has proved to be very useful). We have 2 x iCloud accounts. This causes an issue in terms of synchronisation. Is it possible to synch calendars and photos? As mentioned, the music is no longer an issue with iTunes match. Is there a way that we can synch calendars and photos without having to use a single iCloud account? In addition, the only reason we have separate iCloud accounts is for email. Can I keep my mobile.me email without an iCloud account?

I personally would recommend to use different iCloud account for your own stuff like email, calendars, reminders etc. If you want to have a calendar for your family then just share it via your iPhone, iPad or Mac. Yes, you could keep you me,com email address but it should be migrated to icloud because MobileMe was shut down.

My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

Macbook screen cracked, HD and performance issues

I am definitely disappointed with my computer.
I have a Macbook 13.3" 2.4Ghz Intel Core 2 Duo 4Gb 160Gb HD, Serial#: W8**VM0P5, and within 1,5 year I have faced many issues, which are related here:
September 24th, 2008
O.S. CRASHES
I bought it in late September 2008, in Cologne, Germany, at the reseller "Compustore PC Gmbh", and also asked 4Gb Ram, and a Wireless mighty mouse.
After changing the Ram memory, i went home; and a few days later, the problems came. Sometimes, the system crashed suddenly, showing the grey screen: "You must restart your computer". I thought it was normal, and continued to use, when it became more frequently (Picture: http://picasaweb.google.com/gstorck/MacbookProblems#5476986272817173138). It was little strange for a new laptop, and then I took it back to the store to fix it. The seller just took a look, changed some configurations, and gave me back again. I did this twice, and had to get back to the store for the third time, due to new crashes and some lack of performance. Then the seller replaced the Ram memory, with new 4Gb.
After that, the system worked more stable; the problem happened some two or three times after some months, but it was ok.
November 9th, 2009
HD Problems
One year later, in late 2009, I purchased a Mac OS update, the Snow Leopard. I was back to Brazil, where I live till today. During the OS installation, something went wrong and it couldn't be completed. Mac asked me to restart the computer, but then the system didn't start anymore; some files were corrupted. I guess there was not enough space to install the update, so it was not completed; but it should be no reason to the corruption of the OS.
November 10th, 2009
I took my computer to the local Apple technical support, the "Omni Informatica", in Curitiba, PR, Brazil, to format the HD and reinstall the Snow Leopard. As I needed more space, I also changed my original 160Gb HD for a new 250Gb Western Digital HD. The service was finished in Nov 17th.
I noticed also little cracks in the laptop case, but I had no time to insist with the bad local technical support to repair it (I know Apple already acknowledged this problem.) They said, at first, that they would have to ask the Apple USA to send the body, or something like that.
(Pictures:http://picasaweb.google.com/gstorck/MacbookProblems#5476986477312032226)
January 12th, 2010.
SCREEN CRACKED
The reinstallation was ok, and the laptop was running well. Suddenly, when I take the Macbook from the case and open it on my desk, something pretty wrong appears: a large crack on the lower right corner of the screen.
It was not dropped, it was not crashed, and I did not "close it with a pen inside".
The screen simply cracked. And as so many similar problems with another users I could easily find on the web, I really expect Apple to admit it as a Manufacture's fault. The local technical support said it is no other thing except I hit the laptop, or dropped it, so it's all my fault. (See Picture 3)
The only thing they can offer me is to repair the screen for R$1200. I am definitely not going to pay for this; a "normal" and good pc laptop costs this price (And a new basic macbook costs today R$2400).
If the problems were just it, it would be not so bad.
(Pictures: http://picasaweb.google.com/gstorck/MacbookProblems#5476986361400585122)
February 11th, 2010
HD FAILURE
After 1 month, on Feb 11th, my new 250Gb HD simply stopped working. Different from the first time, that the HD was just corrupted, this time it has really broken, it died. I had it all backed up, but I have lost the HD.
Back again to the technical assistance, they said to me the problem was the same that cracked my screen: my fault, on letting the laptop fall, or hitting it with some kind of pressure. They couldn't do anything, and even the Western Digital 3-month Warranty would not cover this type of problem ("user's misuse").
May 28th, 2010
DECREASE IN PERFORMANCE
I'm working again with the original 160Gb HD (formatted and reinstalled), and some other external drives to store my files.
It's been quite difficult to deal with all this Data and Screen problems, and now the Macbook's performance is decreasing every day. It's been slower to process operations and to launch the applications. Sometimes, the system does not even sleep anymore when the laptop is closed, or it takes so long time to sleep that it just sleeps when I open it again. Besides, sometimes the mouse pointer disappear, and some bizarre graphics take its place.
Don't forget: It's a 1,5-year-old Macbook, with 2.4GHz, 4Gb RAM and the O.S. is installed for no longer than 4 months. It is supposed to work better, I guess.
I saved a lot of money to buy a good computer, and to get rid of the endless issues I had with PCs. That issues never were so serious with the ones I face now with Macbook.
Even if I pay R$1200 to replace the screen, with the money I don't have, I would still stand these performance issues, which seem to have come with this problematical laptop. I hope to have some solution from Apple, if it want to deliver what it promises and want to keep a customer.
Otherwise, I will have to change to another system platform and another computer manufacturer, to see if I stop throwing money away with these devices. I think that maybe at least, the cost-benefit ratio will be higher.
Did anybody receive contact from Apple support about these screen problems?
Guilherme R. Storck
Apple user since 2008
<Edited By Host>
gstorck (at) gmail (dot) com

Well, your first issue is pretty clearly just some bad RAM, and it sounds like even the replacement RAM was bad. Who knows if the people who put it in had any kind of clue what they were doing. I've seen repair shops where people are smoking in the same room they do repairs.
Second problem sounds typical of a failing HDD. It's a fairly common problem with laptops... Apple, Dell, Lenovo, HP, Acer... Probably the single most common problem with laptops no matter who makes them. People get this notion in their heads that the "portable" aspect of laptops means you can pick them up and carry them all over while turned on. Which you can... If you don't mind dramatically shortening the life of the HDD. What "portable" REALLY means with laptops, is that they are easy to move if you put them into a powered down state. They should NEVER be moved around when in normal operation. And since you seem to do a bit of traveling, if you're on a plan, and there's turbulence, you should shut the laptop off until it smooths out.
The screen cracking could have something to do with the rather sudden change in climate. Germany isn't exactly the frozen tundra, but it is a pretty different climate from Brazil, and changes in things like humidity could cause problems. The laws of thermodynamics tell us that things expand as they heat up, so if there's already a crack somewhere, it could easily get worse as a result of increased heat.
And since your initial hard drive was already starting to fail, it hasn't magically stopped failing since being removed from the system, so obviously performance is going to get worse.
At this point, it's pretty much impossible to tell where the damage was done, so you're probably just out of luck. The people in Germany could have screwed something up, or the people in Brazil, it could have been environmental damage, and it's possible the defect was always there, it just didn't manifest until recently. There's just no way to tell for sure. So Apple is unlikely to do anything for you.

Windows 8.1 Devices and Printers Issues

We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
The issue that we have is around network printers.
We are deploying 4 printers from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be
allowed to set their default and personal settings for that printer.
Our printers are deployed like this:
1. Created security group
2. Assigned VDI computers to the security group
3. Created GPO to reflect security group
4. Modify GPO to do security filtering based on computer group membership
5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers
displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then
they can then print OK.
If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer
via the Computer GPO.
I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry.
FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
assigned a particular VDI.
After a week of scratching our heads with this we are open to suggestions and any would be appreciated. We have tried following the issues on this thread to no avail either as they still return.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/71d06204-3735-4473-8bc9-20be9e19090e/problem-with-multiple-instances-of-shared-printers-being-installed-on-client-computers-when-the?forum=winserverprint
many thanks

Hi,
It's strange thing on your client PC. You may ask the GP support engineer to know more.
Support link for GPO:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverGP
On my side, I would like you to try following alternative suggestions:
Try Net use command to map the network printer
Use GPO to deploy the map script
How Can I Add a Network Printer at Logon and, Optionally, Make That the Default Printer?
http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
Hope it could be helpful.
Kate Li
TechNet Community Support

7 year, 100+ PC Veteran Stumped ! Power, and performance issues. Full detail included.

Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.

Quote
Originally posted by AzaghalSEI
Good morning everyone! (At least it's morning in wonderful Pennsylvania USA!)
AMD Athlon 64 3200+ (New Castle)
Thermaltake Venus 12 CPU Cooler w/ Manual Adjust
MSI "K8T Neo-FIS2R" K8T800
512MB x 2 Corsair TWINX1024-3200C2PT (Rated 2-3-3-6 1T)
Antec TruePower 430w PS (+5V@36A +3.3V@28A +12V@20A)
Gainward Dual DVI w/ VIVO GeForce FX5700 Ultra
2x Viewsonic 19" VX900 LCD Monitors
Creative SoundBlaster Audigy Platinum eX
Plextor 712a Black 12x+/8x- DVD-RW
Lite-On SOHD-167T Black 16x DVD-ROM
Western Digital WD740GD 74GB 10,000rpm Raptor SATA
Western Digital WD2500JB 250GB 7,200rpm 8MB IDE
Seagate Barracuda ST3200822AS 200GB 7,200rpm 8MB IDE
Lian-Li PC-65B Black Aluminum Case
Vantech PCI Slot Fan
CyberPower 825va Voltage Regulating UPS
Windows XP Professional SP1a
There we have it, I think that that is all you need to know to perhaps give opinions and advice. Allow me to elaborate on why I am posting today after browsing this wonderful forum for the last two weeks. (...and by the way, my hat's off to some of you knowledgeable regulars for helping out a lot of newbies and folks in trouble!) Without further adieu:
Problem #1: POWER ISSUE
When, or if, I remove AC Power from my PC for whatever reason I run into a problem in which after reconnecting the AC Power and attempting to turn on the computer it goes into a 3-5 second startup loop in which the PC does not post, but rather cycles power to all of the components indefinitely. I notice the LEDs on my optical drives cycling repeatedly ad infinitum until I power off using the 4-second hold method, and then press the power button again. At this point the PC boots up fine, and boots up fine going forward from all restarts and shut downs. How strange? I've never, EVER, encountered something like this before.
Problem #2: PERFORMANCE ISSUE
This PC has a handful of serious performace issues.
3dMark03 scored horribly.
Prime95 runs ridiculously slow although there are no erros! It runs much more quickly on my work PC which is a PIII 866mhz with 384MB of PC133 RAM.
I receive, on no regular frequency, or while doing anything in particular, Explorer memory errors. Not BSOD's mind you, but "...blah blah blah referenced memory address xxxxx-xxxxx and could not be written". This causes Explorer to restart itself, blowing away the start menu, task bar, and any Explorer windows open. They reappear, of course, without incident.
The most off performance issue of all is that when opening an Explorer window for either of my IDE HDs, designated D and E drives, I find that when using the highlighting rectangle tool the Explorer window freezes or lags. I can double-click and open or move/copy files without incident, but if I attempt to highlight by this method this halt or lag occurs.
Also, since my update of the BIOS from 1.2 to 1.7, and then to 1.8 system startup times prior to Windows loading are HORRID. I have disabled just about everything, and yet the SATA BIOS loads for 5 seconds, and then I must wait 20 seconds for Windows itself to come to the login screen. No other BIOS related issues to report per se, but this is terrible for what should be a blazingly fast computer.
Now let's see.. what have I tried to do to repair the issues?
1) 2 BIOS flashes. First from 1.2->1.7, and then from 1.7->1.8. Ostensibly this was just "because". The power user need to have the latest! I noticed the incorrect CPU temperature being reported, however.. This led to me buying this massive ThermalTake HSF to replace my stocker. I also added more thermal goop than I ever have before, as well as a PCI slot fan before I became aware that it was a BIOS issue! GRRRR MSI.
2) I thought perhaps for the one issue that one of the hard drives was an issue, and even perhaps for power, but I replaced each with new drives and tested all 4 on another PC. NO problems. Also I should perhaps mention that my IDE drives are all hooked up using Antec Cobra cables. Expensive yes, but why the hell not, right? I've never seen a hang-off grounding wire for IDE before. Decided not to use them as I could think of a great place to screw them in, nor have other PC using them had trouble skipping the ground wire.
3) I unplugged every molex cable, the 4-pin CPU power, and the 20-pin ATX power and rerranged them all - as well as removed and then reinserted the RAM.
4) I tried changing my memory timings and power management settings, etc in BIOS. Nothing seem to impact the issue. I didn't fiddle with the voltages, but I should not need to running the RAM at SPD or lower settings and without overclocking the system at all!
5) Another issue that I had that seems to have vanished, come back, vanished, and then come back a "little bit" is my USB ports. When set to enable legacy devices in BIOS my USB items like my Logitech wireless keyboard would just cycle power and refuse to function. Also my UPS connected VIA USB seems to sometimes handshake with Windows and sometimes not. I've tried using all of the different ports, etc but the problem remains. I NEED 6 ports for my devices so it is all that I could do!
6) I have an Enermax 550w EG651P-VE(FMA) with 36 amps on each voltage rail on it's way, and it should arrive tomorrow. Despite all of the crap regarding power supplies that I see on this board I am not confident that it's the problem. That Antec PSU should be able to hold it's on with 20 amps on the +12v channel. C'mon now. I build a nearly identical system with the same power supply for a customer and he has no problems at all. He also has 3 HDs, same motherboard, etc.. the only difference is he has but one optical drive and a 2800+ rather than a 3200+. That power difference should be decimal nature in amps needed.
...oh and the sound card is in PCI slot 3, for those that remember the glory days of sound card IRQ issues that Creative was once notorious for... oh, and I disable the ethernet boot device, etc so my slow startups should not be related. My serial ATA drive is also on connection 1 of the VIA controller.. Promise can kiss my a**.
Soooo.. Show me what a n00b I am, oh great ones. I've built over 100 PCs since 1998 for myself, friends, families, and customers... and I've never seen an issue like this one! I'm no dummy, but please don't assume too much. Other pros on here know full well you can forget the most simple mundane detail in spite of experience! I want to solve this problem. I am on the verge of shelling out for a new motherboard and processor of the 939 pin variety.. and am now wary of MSI's long awaited socket 939 K8 Neo2 board despite it's awesome reviews. MSI has never really given me trouble before.. but I don't really want to spend money to the order of $200+ for that damned Gigabyte board. Gigabyte has always been good to me as well. Save my wallet! PLEASE!!!
Thanks so much everyone, I tried very hard not to leave out any details!
Az (Ian)
You can reach me on Yahoo or AIM just about any time, and I will check here frequently.
The startup problem might just be a screwy psu. Your antec *should* be able to power your stuff just fine, but maybe it is defective in some strange way.
What is your 3dmark03 score? If it is 3000-4000, (approx perf. level of ati 9600xt), then it is fine.
Check your memory using memtest86+, and try underclocking it to ddr333.
UNplug usb devices, and see if it speeds up boot. Also, I would not recommend bios 1.8 since people seem to have some troubles with it.
Also, try disabling agp fast writes, disabling spread spectrum, and maybe boosting ram voltage a tiny bit.
Try booting without your audigy plugged in, and try booting barebones (nothing but 1 hard drive with os) and see what happens.
I'm no expert, but you might get lucky trying these steps.

Generic extraction loading and performances issues

hi,
any one can give the details about the generic extraction loading as well as performance issues.
advance thanks
regards
praveen

Hi,
when there is no suitable business content datasource we go for creating generic data source.
by using generic data source we can extract data present in single or multiple tables.
If the data is present in the single table we go for generic data source extracting from table.
If the data that is to be extracted is present in multiple tables and the relation between the tables is one to one and if there is a common field in both the tables we create a view on these tables and create a generic data source extracting from view.
if you want to extract data from different tables and there is no common field we create a info set on these tables and create a generic datasource extracting from query.
if you want to extarc the data from different tables and the relation is one to many or many to many we create a generic data source from function module.
If we extarct from function module ,at run time it has to execute the code and brings the data to BW.so it degrades the loading performance.
regards,

Use of HttpSession and Performance Issues

I am working on an application where we are storing data in a user's HttpSession. The application consists of several modules. Each module consists of sub-modules. A sub-module contains various data which is display to the user as multiple tabs with each tab displaying a JSP. The data displayed on each JSP is stored in the HttpSession for a given browser window. So if the user only has one browser window open there will be one entry in the HttpSession for that window containing the data for the various tabs of the displayed sub-module.
This effort has been a transition of a legacy Powerbuilder application over to the Web. We have noticed, along with the users :( some delays in displaying data. We only connect to the database during the initial retrieve of the data. Once the data for a sub-module is retrieved it is displayed and stored in the HttpSession. As the user makes modifications we modify the appropriate structure in the HttpSession. When the user Saves the data, that is when we make a connection to the back end database.
What is the best way to determine if there are true performance issues or whether we are just experiencing the cost of doing business across the Web?
Does using HttpSession cause potential performance issues?
We are also using the Netui tags in the JSP's and we have discovered some overhead when tag ids are used. In most places we have removed the tag ids since extra script is generated when they are used in conjunction with the Netui tags. This has helped in some places with the rendering of data on a page.
Anyone have any suggestions/ideas?
Thanks in advance.
Michelle

Is anybody using MODEL in production?
How is the performance - is there any real problems?I used a MODEL query last year to simulate a FIFO queue and calculate average stock prices.
It performs pretty well, but the volume of data is small though (~200k rows processed per batch session).

Can I have one cloud for my family with multiple devices and apple ids?

I need to know the best way to link multiple devices with different apple ids to the same iCloud to share iTunes and content.

My iphone 5s = apple id 1
Husband iphone 4s = apple id 2
My ipad = apple id 3
Son #1 ipad mini = apple id 4
Son #2 ipad mini = apple id 5
For iCloud.. Not quite, you want the same ID for iCloud on your phone and iPad so you have the same info on each. (so perhaps ID 1 on both.
But if you want to share your music (assuming lets say its your ID 1 that has the iTunes account), you should all use ID 1 for iTunes.

Linking multiple devices and different game accounts on one gamecentre

Hi I have multiple accounts on multiple devices on one Game Centre account but I want to link a specific one to my new iPad ? Just wondering if this is possible as I have bought my partner an iPad but it will only link my clash of clans progress to the iPad from my phone but I want it to link her progress ?? Any help would be appreciated
Thanks!

1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941)

Help with multiple devices and one ID

I am sure this has been asked before but i apologize as I am new at all this.
This is my issue...
In April I bought my wife and iPad 2 signed up for an ID and started downloading apps..no problems at all so far.
Within a month we had downloaded a bunch of apps for my 4 yr old.
I bought another iPad 2 for my 4 yr old so he can use on his own. This is the issue, in my wives iPad we downloaded some paid apps and some free ones, some of them are games that have been advancing as he is playing them...my wife has also downloaded some paid games that she has been playing.
So here is my dilema, can I sync my wifes iPad with iTunes and then move the apps that I want to my sons iPad?
Also, will the move also include where he left off in the app...for example if this is like a building a zoo type of game and he has half of it built...will the move include his progress or will it make him start from the begining of the game?
i dont want to use the same apps in two different iPads, i just want to transfer his to a new one and leave my wifes in her ipad.
Please let me know if you need more information in order to help me.
Thanks Again

Have your wife transfer all purchases from the iPad into iTunes, backup her iPad and then sync with iTunes. Everything ... All media and other content will be available in that iTunes library and she will have a current backup.
Assuming that your son will still be sharing your wife's Apple ID (he is too young to have one of his own) .... When you set up his iPad, restore the iPad from your wife's backup and then select only the content that you want your son to have on his iPad in the iTunes library and then sync that iPad with iTunes.
The game progress is stored in the backup and should transfer onto his device when you restore from your wife's backup. You can always delete any content (apps, movies, music) that you don't want your son to have on the iPad, if you missed it when you synced with iTunes after setting the device up for him.
You can set your sync preferences - any way that you want to - for both devices and still use the same iTunes library for both iPads. So ... Yes you can sync any apps that you want to his iPad and any apps that your wife wants to her iPad. You just need to restore your son's iPad from your wife's backup in order to get his game progress onto his iPad.
In case you need these....
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Remember to have your wife backup her iPad just before you restore his iPad from the backup so that his most recent progress will be available in the backup.

Auto-renew with multiple devices and multiple accounts

Hi,
We have an app that user can create auto-renew subscription in our service. The app need one account in our service and he can create a subscription for this user in our service, so, if he make login in our app on iphome, ipad, web, android, etc. he can use our services.
So the problem is:
1 - The user in our system called XXX create a subscription with itunes acount AC1 and after one month another people called YYY in our system make login on that same device, and create a new subscription with the same itunes user account called AC1, he can? We can make multiple subscription for the same itunes user?
2 - When the transaction came to my device, i send the receipt file data to the server check on apple and create enable the content for that user. What the logic used to i know the customer by transactions in the receipt? If the user logout in app from their account, but the receipt still coming every week, how i know the customer by the transaction or receipt data after check on apple? How you do it?
3 - The user make a subscription on 1st may, i sent the receipt to server and the server enable the content to me. My app is never openned more or the app is uninstalled, i still receiving the money from that subscription if i dont call method "[[SKPaymentQueue defaultQueue] finishTransaction: transaction]" on app because he dont open the app? I have another way, like a callback service, to receive the transaction notifications, or only by app?
Im searching for this answer a lot, but not found
Can anyone help me?

My iphone 5s = apple id 1
Husband iphone 4s = apple id 2
My ipad = apple id 3
Son #1 ipad mini = apple id 4
Son #2 ipad mini = apple id 5
For iCloud.. Not quite, you want the same ID for iCloud on your phone and iPad so you have the same info on each. (so perhaps ID 1 on both.
But if you want to share your music (assuming lets say its your ID 1 that has the iTunes account), you should all use ID 1 for iTunes.

Output Device and Format issues in Background?

Hi, all:
I have a issue. when I run the job as the background. whatever I choose which Output Device and Output Format. after finishing job. double click on the spool number. the Output Device is always LP01. Format is X_PAPER.
Anybody knows what happend in SAP.
Thanks in advance.

Hi Yunfa Zhang,
what is defined as ABAP program in the Job's step? Maybe it ignores whatever you specify and reads the LP01 from somwwhere else, i.e. your user settings.
Regards,
Clemens

PhotoStream: Multiple Devices and Performance Issues

Similar Messages

Maybe you are looking for