PHP 4 XML problem

Hi,
I'm developing in a PHP 5 environment and my server is PHP 4
I'm trying to dynamically create an XML file, which works on
my local machine. But on the PHP 4 server does not how can I get
the code below working?
The code is for PHP 5, I need to "downgrade" it
somehow

Instead of using PHP to write my .xml file I have used this:
I've posted on the InDesign forum, but no luck yet. I have no
way of passing the font attributes. :'(

Similar Messages

  • Issue with parameter passing in ie7 to php xml

    Hi
    I wondered if anyone could offer a little advice what the issue is here.
    I have a page with xml generated from php in a separte file and presented by a dataset in spry.
    The xml is OK and in firefox it all works but ie seems to barf on it.
    The situation is this:
    I have a jump menu on a front page that provides a url with anumeric parameter passed like this
    platforms.php?platform_id=1
    This parameter is picked up by php on the platforms.php page using the $_GET Array and is passed into the code in my Spry dataset to the file that runs my query and returns my xml- so basically the page displays a dataset filtered on this parameter id.
    It works perfectly in FF.
    In IE if I link straight to the page without a parameter at all- so platforms.php the page loads OK using the default parameter I have set up in the top of this page to send the default id of 1 to the code page so the spry query says platform_sql.php?platform_id=1 and the xml generator is fine with thisiel. ie I do a
    if(isset($_GET['platform_id'])){
                                                                     $platform=$_GET['platform_id'];
    }else{
    $platform=1;
    The dataset loads Ok in IE but when I pass a parameter in the url from my jump menu IE gives a blank SPRY table i- it momentarily appears with just the placeholders for my dataset elements then vanishes. The source code of the page shows the correct id was set in the spry data going to my query file.
    There is an error in ie saying there is a javascript error but its not any help- in ie fashion- FF shown no such errors.
    I thought this might be a data type thing again in the dataset but its not - I have set the elements returned to simple strings but it still does not work.
    Is there a problem passing in a parameter like this to a spry dataset?

    After about half a day of mucking round I found the problem and a solution to this problem.
    What appeared to have happened was that some of the older content in my database used html originally encoded using a WYSWYG editor called ktml.
    Later data uses Tiny MCE. It looks like the character set of the two formats is slightly different and as a result some characters rendered incorrectly when passed through XML parsing where it specifies the character set as utf-8.
    Firefox on the whole seems to ignore the issue though looking at the raw xml output of my php-xml code- where "-" characters were (dashes) there was a question mark character shown. None the less in actual use on my page the xml was produced and the dataset worked out.
    In IE, it barfed at these same characters and failed to return the xml dataset.
    What confused the issue more was some of my smaller datasets if they by chance never had a "-" character in rendered OK in IE- hence my default dataset (platform_id=1) worked in IE. After much experimenting I noticed other ids worked too if there was never such a character.
    How I got round it was to wrap my server side data in the utf8_encode() function, and now all my xml is clean.
    The javascript error being thrown was a red herring though I could not tell until I managed to run my page in ie7 with Visual Studio Express error console running- I had this on a spare machine at work so could debug with it.
    All sorted now- now just need to find away to wrap all my datasets in collapsible panels that work.
    K

  • IOError in IE but not in Firefox (possible crossdomain.xml problem)

    Yesterday, I hopefully debugged a problem that is occuring for our application in IE but not in Firefox.
    It has to do with accessing remote content from a separate domain.
    In every aspect it APPEARS to be a crossdomain.xml issue but the fact that this issue only arrises in IE is what has prompted me to post here.
    We have a solution in the works (bureaucratically speaking) but I want to double check here.
    Our application is on domain "a.domain".
    It access an xml file on "b.domain/xml/".
    And finally (this is the tricky part) it also accesses an xml file at "b.domain/forwardingPath/" which is actually forwarded to "c.domain/xml/".
    The crossdomain.xml is located at "b.domain/crossdomain.xml".
    The request for "b.domain/xml/anXMLFile.xml" works without any problem.
    The request for "b.domain/forwardingPath/anotherXMLFile.xml" succeeds in Firefox but not in IE (remember, the ACTUAL request is forwarded to "c.domain/xml/anotherXMLFile.xml").
    In IE I get an IOError.
    I believe we need an appropriate crossdomain.xml file also located at "c.domain/crossdomain.xml" and have put in that request.  What I want to confirm is whether this understanding is correct.  I am not a server-side person at all.  It's all elves and fairies to me.  And then finally, why the hell is this behavior inconsistent between IE and Firefox?  Is the Firefox version of flash player violating its own security standards?!
    I am cross-posting this at stack overflow.  http://stackoverflow.com/questions/7395931/ioerror-in-ie-but-not-in-firefox-possible-cross domain-xml-problem

    I've pinged our developers about this and here's what they have to say:
    "We did some work for the plugin around redirects andhence the correct behavior on Firefox.
    AFAIK, on IE we don't get notified of the redirect and can't participate in making security decisions during redirect scenarios. This behavior is out of our control.
    There is a workaround documented in the AS3docs here: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/system/LoaderCont ext.html#checkPolicyFile
    Here is the pertinent paragraph:
    Be careful with checkPolicyFile if you are downloading anobject from a URL that may use server-side HTTP redirects. Policy files arealways retrieved from the corresponding initial URL that you specify inURLRequest.url. If the final object comes from a different URL because of HTTPredirects, then the initially downloaded policy files might not be applicableto the object's final URL, which is the URL that matters in security decisions.If you find yourself in this situation, you can examine the value ofLoaderInfo.url after you have received a ProgressEvent.PROGRESS orEvent.COMPLETE event, which tells you the object's final URL. Then call theSecurity.loadPolicyFile() method with a policy file URL based on the object'sfinal URL. Then poll the value of LoaderInfo.childAllowsParent until it becomes true."
    Chris

  • Web.xml problem in Enterprise Manager 10g

    I got an error while deploying to Enterprise Manager 10g
    My platform: Windows XP
    OC4J 9.0.4
    Enterprise Manager 10g
    And I even have the web.xml in the correct directory. i.e
    cpd.ear
    ./META-INF/application.xml
    ./cpd-ejb.jar/WEB-INF/web.xml
    ./cpd-webapp.war/WEB-INF/web.xml
    ./cpd-webapp.war/WEB-INF/classes
    The error I get while deploying on a Enterprise Manager 10g is:
    Invalid J2EE application file specified - Jar file: :\WINNT\TEMP\jar47575.tmp is missing its standard xml descriptor located at WEB-INF/web.xml
    Incidently the *.ear file built by my fellow's machine is deploying perfectly. I've compared the directories n useful files of both the *.ears down to the very last bit n they are the same.
    I can imagine that guys with only high IQ can solve this mystery

    The above message is a duplicate of another message by Sim.
    web.xml problem in Enterprise Manager 10g

  • Can someone please help me on basic info of PHP&XML&Flash

    i want to go into displaying information from the MySQL
    database into Flash Grid.... How can I do that and what tutorials
    will guide me through to be able to that....?
    Ayo

    For starters, read the Help Docs in Flash on Data
    Integration. There's even a tutorial in Flash 8 called "Flash and
    PHP Integration." Then you might want to Google "flash php xml
    tutorial" which returns plenty of stuff to keep you reading for a
    while.
    Good luck!

  • Log-Configuration.xml Problems

    Hi, I have been trying to use log-configuration.xml but it seems like i cannot get it to work at all.
    From what i understand, once i deploy my application, i should be able to edit the config via the Visual Administrator. However, after i deploy my app, i am still unable to see it with visual administrator. furthermore, i cannot find the file anywhere on the sever. Also, my settings are not reflected in the behaviour of the defaultTrace.
    Am i suppose to be able to find the "log-configuration.xml" file in the server if i have done the correct steps? If so, what are the likely mistakes i have made? I am at my wits end, anyone can help me?
    Just to add, this post seems to describe exactly my situation except i have no idea how to "manually" correct it... log-configuration.xml outside META-INF due to NWDS
    TIA!
    Ah Beng
    Message was edited by: ah beng

    Hi Rajeshkr,
    Sorry, i am kinda new to web dynpro and sap in general so i may need you to be more explicit
    I am not quite sure what this part means or how to check "...has been deployed successfully in the deploy node of the visual Node and check for the Log Configuratior Node and check for your deployed application...."
    What i did do is go to the server to and search the entire directory structure for the log-configuration.xml but could not find it. Also, the config cannot be seen via the log-configurator in visual administration engine which its supposed too i think. and lastly the behavoiur i set in the log-configuration.xml is not reflected in the defaultTrace
    Then i saw this post so i went to check the EAR file in my workspace and found that it was just like Manik described.
    Maybe u could check this link where i posted more about my problem Log-Configuration.xml Problems
    I would love to award points if it helps

  • Communication problem MYSQL PHP XML Flash.

    I have driven myself into a corner with this so I hope someone here knows a solution.
    I am building a photogallery with a simple html layout but with a flash slideshow.
    The data for each album and photo are stored in a mysql database. Each photo-image is in one big folder on the server. With PHP I sort out which photo belongs to what album and display them accordingly. To start the slideshow people can click on a link near the album, this link will send a < href> with the album ID to an PHP file (xml.php) that will generated an XML output created from the MYSQL server. Here comes my problem:
    Loading XML into flash is no problem BUT I only know how to do this with a static or self supporting XML output. (xml.php needs the input of the album ID else it will not get the correct data). For now I have a temporary solution where I write the XML output from xml.php to a txt file and let Flash read from there, but is there a way where I can read directly from xml.php?

    Echo your formatted xml out as a string in xml.php, Flash will then read your dynamically generated XML.

  • Nginx + php-fpm problem

    Hello there.
    I just setup nginx with mysql and php-fpm to my archlinux install and i need help.
    i checked all over internet and try every solution, none still work.
    i have a blank page problem
    this is working correctly:
    <?php
    phpinfo();
    ?>
    short tags are enabled and php short tags are also working.
    i try to install phpbb, the install page load, once the install done.. blank page.
    i tryed a working backup of phpbb from my old server.. blank page, same with my phpnuke backup, blank page.
    i tryed chown to root:root and http:http, and chmod rwx for group user and other, i dont think it is a permission problem.
    Probably a little stupid error on my end but i can't find it, i tryed everything.
    my nginx.cong
    #user html;
    worker_processes 1;
    #error_log logs/error.log;
    #error_log logs/error.log notice;
    #error_log logs/error.log info;
    #pid logs/nginx.pid;
    events {
    worker_connections 1024;
    http {
    include mime.types;
    default_type application/octet-stream;
    #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
    # '$status $body_bytes_sent "$http_referer" '
    # '"$http_user_agent" "$http_x_forwarded_for"';
    #access_log logs/access.log main;
    sendfile on;
    #tcp_nopush on;
    #keepalive_timeout 0;
    keepalive_timeout 65;
    #gzip on;
    server {
    listen 80;
    server_name localhost;
    #charset koi8-r;
    #access_log logs/host.access.log main;
    location / {
    root /usr/share/nginx/html;
    index index.html index.htm;
    #error_page 404 /404.html;
    # redirect server error pages to the static page /50x.html
    error_page 500 502 503 504 /50x.html;
    location = /50x.html {
    root /usr/share/nginx/html;
    # proxy the PHP scripts to Apache listening on 127.0.0.1:80
    #location ~ \.php$ {
    # proxy_pass http://127.0.0.1;
    # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
    #location ~ \.php$ {
    # root html;
    # fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    # fastcgi_index index.php;
    # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
    # include fastcgi_params;
    # deny access to .htaccess files, if Apache's document root
    # concurs with nginx's one
    #location ~ /\.ht {
    # deny all;
    # another virtual host using mix of IP-, name-, and port-based configuration
    #server {
    # listen 8000;
    # listen somename:8080;
    # server_name somename alias another.alias;
    # location / {
    # root html;
    # index index.html index.htm;
    server {
    listen 80;
    listen clan-ws.net:80;
    server_name clan-ws.net www.clan-ws.net;
    autoindex on;
    root /srv/http/;
    index index.html index.htm index.php;
    location ~ \.php$ {
    #fastcgi_pass 127.0.0.1:9000;
    fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
    fastcgi_index index.php;
    # include fastcgi.conf;
    include fastcgi_params;
    # include /etc/nginx/fastcgi_params;
    # HTTPS server
    #server {
    # listen 443;
    # server_name localhost;
    # ssl on;
    # ssl_certificate cert.pem;
    # ssl_certificate_key cert.key;
    # ssl_session_timeout 5m;
    # ssl_protocols SSLv2 SSLv3 TLSv1;
    # ssl_ciphers HIGH:!aNULL:!MD5;
    # ssl_prefer_server_ciphers on;
    # location / {
    # root html;
    # index index.html index.htm;
    php-fpm.conf
    ; FPM Configuration ;
    ; All relative paths in this configuration file are relative to PHP's install
    ; prefix (/usr). This prefix can be dynamicaly changed by using the
    ; '-p' argument from the command line.
    ; Include one or more files. If glob(3) exists, it is used to include a bunch of
    ; files from a glob(3) pattern. This directive can be used everywhere in the
    ; file.
    ; Relative path can also be used. They will be prefixed by:
    ; - the global prefix if it's been set (-p arguement)
    ; - /usr otherwise
    ;include=/etc/php/fpm.d/*.conf
    ; Global Options ;
    [global]
    ; Pid file
    ; Note: the default prefix is /var
    ; Default Value: none
    pid = /run/php-fpm/php-fpm.pid
    ; Error log file
    ; If it's set to "syslog", log is sent to syslogd instead of being written
    ; in a local file.
    ; Note: the default prefix is /var
    ; Default Value: log/php-fpm.log
    ;error_log = log/php-fpm.log
    ; syslog_facility is used to specify what type of program is logging the
    ; message. This lets syslogd specify that messages from different facilities
    ; will be handled differently.
    ; See syslog(3) for possible values (ex daemon equiv LOG_DAEMON)
    ; Default Value: daemon
    ;syslog.facility = daemon
    ; syslog_ident is prepended to every message. If you have multiple FPM
    ; instances running on the same server, you can change the default value
    ; which must suit common needs.
    ; Default Value: php-fpm
    ;syslog.ident = php-fpm
    ; Log level
    ; Possible Values: alert, error, warning, notice, debug
    ; Default Value: notice
    ;log_level = notice
    ; If this number of child processes exit with SIGSEGV or SIGBUS within the time
    ; interval set by emergency_restart_interval then FPM will restart. A value
    ; of '0' means 'Off'.
    ; Default Value: 0
    ;emergency_restart_threshold = 0
    ; Interval of time used by emergency_restart_interval to determine when
    ; a graceful restart will be initiated. This can be useful to work around
    ; accidental corruptions in an accelerator's shared memory.
    ; Available Units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;emergency_restart_interval = 0
    ; Time limit for child processes to wait for a reaction on signals from master.
    ; Available units: s(econds), m(inutes), h(ours), or d(ays)
    ; Default Unit: seconds
    ; Default Value: 0
    ;process_control_timeout = 0
    ; The maximum number of processes FPM will fork. This has been design to control
    ; the global number of processes when using dynamic PM within a lot of pools.
    ; Use it with caution.
    ; Note: A value of 0 indicates no limit
    ; Default Value: 0
    ; process.max = 128
    ; Specify the nice(2) priority to apply to the master process (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool process will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
    ; Default Value: yes
    ;daemonize = yes
    ; Set open file descriptor rlimit for the master process.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit for the master process.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Specify the event mechanism FPM will use. The following is available:
    ; - select (any POSIX os)
    ; - poll (any POSIX os)
    ; - epoll (linux >= 2.5.44)
    ; - kqueue (FreeBSD >= 4.1, OpenBSD >= 2.9, NetBSD >= 2.0)
    ; - /dev/poll (Solaris >= 7)
    ; - port (Solaris >= 10)
    ; Default Value: not set (auto detection)
    ;events.mechanism = epoll
    ; When FPM is build with systemd integration, specify the interval,
    ; in second, between health report notification to systemd.
    ; Set to 0 to disable.
    ; Available Units: s(econds), m(inutes), h(ours)
    ; Default Unit: seconds
    ; Default value: 10
    ;systemd_interval = 10
    ; Pool Definitions ;
    ; Multiple pools of child processes may be started with different listening
    ; ports and different management options. The name of the pool will be
    ; used in logs and stats. There is no limitation on the number of pools which
    ; FPM can handle. Your system will tell you anyway :)
    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or /usr) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ; will be used.
    user = http
    group = http
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
    ; a specific port;
    ; 'port' - to listen on a TCP socket to all addresses on a
    ; specific port;
    ; '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    ;listen = 127.0.0.1:9000
    listen = /run/php-fpm/php-fpm.sock
    ; Set listen(2) backlog.
    ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
    ;listen.backlog = 128
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server. Many
    ; BSD-derived systems allow connections regardless of permissions.
    ; Default Values: user and group are set as the running user
    ; mode is set to 0666
    listen.owner = http
    listen.group = http
    listen.mode = 0660
    ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    ;listen.allowed_clients = 127.0.0.1
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ; - The pool processes will inherit the master process priority
    ; unless it specified otherwise
    ; Default Value: no set
    ; priority = -19
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ; static - a fixed number (pm.max_children) of child processes;
    ; dynamic - the number of child processes are set dynamically based on the
    ; following directives. With this process management, there will be
    ; always at least 1 children.
    ; pm.max_children - the maximum number of children that can
    ; be alive at the same time.
    ; pm.start_servers - the number of children created on startup.
    ; pm.min_spare_servers - the minimum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is less than this
    ; number then some children will be created.
    ; pm.max_spare_servers - the maximum number of children in 'idle'
    ; state (waiting to process). If the number
    ; of 'idle' processes is greater than this
    ; number then some children will be killed.
    ; ondemand - no children are created at startup. Children will be forked when
    ; new requests will connect. The following parameter are used:
    ; pm.max_children - the maximum number of children that
    ; can be alive at the same time.
    ; pm.process_idle_timeout - The number of seconds after which
    ; an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 5
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 2
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 1
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 3
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    ;pm.max_requests = 500
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ; pool - the name of the pool;
    ; process manager - static, dynamic or ondemand;
    ; start time - the date and time FPM has started;
    ; start since - number of seconds since FPM has started;
    ; accepted conn - the number of request accepted by the pool;
    ; listen queue - the number of request in the queue of pending
    ; connections (see backlog in listen(2));
    ; max listen queue - the maximum number of requests in the queue
    ; of pending connections since FPM has started;
    ; listen queue len - the size of the socket queue of pending connections;
    ; idle processes - the number of idle processes;
    ; active processes - the number of active processes;
    ; total processes - the number of idle + active processes;
    ; max active processes - the maximum number of active processes since FPM
    ; has started;
    ; max children reached - number of times, the process limit has been reached,
    ; when pm tries to start more children (works only for
    ; pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ; pool: www
    ; process manager: static
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 62636
    ; accepted conn: 190460
    ; listen queue: 0
    ; max listen queue: 1
    ; listen queue len: 42
    ; idle processes: 4
    ; active processes: 11
    ; total processes: 15
    ; max active processes: 12
    ; max children reached: 0
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ; http://www.foo.bar/status
    ; http://www.foo.bar/status?json
    ; http://www.foo.bar/status?html
    ; http://www.foo.bar/status?xml
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ; http://www.foo.bar/status?full
    ; http://www.foo.bar/status?json&full
    ; http://www.foo.bar/status?html&full
    ; http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ; pid - the PID of the process;
    ; state - the state of the process (Idle, Running, ...);
    ; start time - the date and time the process has started;
    ; start since - the number of seconds since the process has started;
    ; requests - the number of requests the process has served;
    ; request duration - the duration in µs of the requests;
    ; request method - the request method (GET, POST, ...);
    ; request URI - the request URI with the query string;
    ; content length - the content length of the request (only with POST);
    ; user - the user (PHP_AUTH_USER) (or '-' if not set);
    ; script - the main script called (or '-' if not set);
    ; last request cpu - the %cpu the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because CPU calculation is done when the request
    ; processing has terminated;
    ; last request memory - the max amount of memory the last request consumed
    ; it's always 0 if the process is not in Idle state
    ; because memory calculation is done when the request
    ; processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ; pid: 31330
    ; state: Running
    ; start time: 01/Jul/2011:17:53:49 +0200
    ; start since: 63087
    ; requests: 12808
    ; request duration: 1250261
    ; request method: GET
    ; request URI: /test_mem.php?N=10000
    ; content length: 0
    ; user: -
    ; script: /home/fat/web/docs/php/test_mem.php
    ; last request cpu: 0.00
    ; last request memory: 0
    ; Note: There is a real-time FPM status monitoring sample web page available
    ; It's available in: ${prefix}/share/fpm/status.html
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ; anything, but it may not be a good idea to use the .php extension or it
    ; may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    ; The access log format.
    ; The following syntax is allowed
    ; %%: the '%' character
    ; %C: %CPU used by the request
    ; it can accept the following format:
    ; - %{user}C for user CPU only
    ; - %{system}C for system CPU only
    ; - %{total}C for user + system CPU (default)
    ; %d: time taken to serve the request
    ; it can accept the following format:
    ; - %{seconds}d (default)
    ; - %{miliseconds}d
    ; - %{mili}d
    ; - %{microseconds}d
    ; - %{micro}d
    ; %e: an environment variable (same as $_ENV or $_SERVER)
    ; it must be associated with embraces to specify the name of the env
    ; variable. Some exemples:
    ; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ; %f: script filename
    ; %l: content-length of the request (for POST request only)
    ; %m: request method
    ; %M: peak of memory allocated by PHP
    ; it can accept the following format:
    ; - %{bytes}M (default)
    ; - %{kilobytes}M
    ; - %{kilo}M
    ; - %{megabytes}M
    ; - %{mega}M
    ; %n: pool name
    ; %o: ouput header
    ; it must be associated with embraces to specify the name of the header:
    ; - %{Content-Type}o
    ; - %{X-Powered-By}o
    ; - %{Transfert-Encoding}o
    ; %p: PID of the child that serviced the request
    ; %P: PID of the parent of the child that serviced the request
    ; %q: the query string
    ; %Q: the '?' character if query string exists
    ; %r: the request URI (without the query string, see %q and %Q)
    ; %R: remote IP address
    ; %s: status (response code)
    ; %t: server time the request was received
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %T: time the log has been written (the request has finished)
    ; it can accept a strftime(3) format:
    ; %d/%b/%Y:%H:%M:%S %z (default)
    ; %u: remote user
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    ;slowlog = log/$pool.log.slow
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ; possible. However, all PHP paths will be relative to the chroot
    ; (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /srv/http
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ; php_value/php_flag - you can set classic ini defines which can
    ; be overwritten from PHP call 'ini_set'.
    ; php_admin_value/php_admin_flag - these directives won't be overwritten by
    ; PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or /usr)
    ; Default Value: nothing is defined by default except the values in php.ini and
    ; specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
    ;php_flag[display_errors] = off
    ;php_admin_value[error_log] = /var/log/fpm-php.www.log
    ;php_admin_flag[log_errors] = on
    ;php_admin_value[memory_limit] = 32M
    php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = On
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.

    rune0077 wrote:
    Try this solution:
    https://wiki.archlinux.org/index.php/Ng … gh_FastCGI
    That isn't exactly my problem. The server responds with no body (so no blank html document)
    root@server ~# curl -vH "Host: ███████" localhost/test.php
    * Hostname was NOT found in DNS cache
    * Trying ::1...
    * connect to ::1 port 80 failed: Connection refused
    * Trying 127.0.0.1...
    * Connected to localhost (127.0.0.1) port 80 (#0)
    > GET /test.php HTTP/1.1
    > User-Agent: curl/7.36.0
    > Accept: */*
    > Host: ███████████
    >
    < HTTP/1.1 200 OK
    * Server nginx/1.6.0 is not blacklisted
    < Server: nginx/1.6.0
    < Date: Tue, 20 May 2014 20:11:02 GMT
    < Content-Type: text/html
    < Transfer-Encoding: chunked
    < Connection: keep-alive
    < Vary: Accept-Encoding
    <
    * Connection #0 to host localhost left intact
    When I do set SCRIPT_FILENAME to $document_root$fastcgi_script_name, it responds with "No input file specified."
    Spider.007 wrote:If there are no errors; tell us what your access-logs tell. Enable them in fpm and tell us if the request ends up there. Also; nginx can also log the upstream ip-address; if you add that to the access-logs you'll at least know if the problem is nginx, or fpm
    The nginx log message:
    127.0.0.1 - - [20/May/2014:14:15:50 -0600] "GET /test.php HTTP/1.1" 200 5 "-" "curl/7.36.0"
    I'll try to find a way to make php-fpm more verbose and I'll edit this post with the error when I do. At the moment it's only logging startups/shutdowns.
    Last edited by phillips1012 (2014-05-20 20:23:40)

  • XML Problem - Markup not well-formed? (kinda long)

    Hello, I'm working on my first AIR app and I've run into a bit of a snag.  The app is intended to allow users of our system to create a Word document, save it as XML, and then load it into the AIR app and have some manipulation performed to extract data, and finally store the data in a database.  The reasons for this app to exist are pretty irrelevant for the particular problem that I'm having, but a little background on my development efforts might help shed light on my situation, and with luck one of you might be able to help me figure this out.
    I started on this app using the URLLoader and URLRequest objects to load a Word document saved as XML from a server.  This worked fine, I created logic to distinguish between Word 2007 and Word 2003 XML formats and using the E4X XML and XMLList objects I was able to load that XML into an XML object, change it to a string, grab the document body, strip out namespaces and such (formatting is mostly irrelevant here too, only the actual data is of importance) amd eventually get a much simpler XML object or list that contained just the data relevant to the purpose at hand.  This was all working fine, I managed to get both Word XML formats to process as I wished and spit out new XML that will serve as the basis for another application that we run.  Great! 
    The problem was that in order to use this method in a distributed way I needed to have the original Word documents accessible to the code, which meant having the user upload their Word file (saved as XML) and then retrieving it with the URLLoader and URLRequest.  I actually implemented this method using the FileReference object in AS3 and using some simple PHP code to store the file in a server directory that was accessible to the client.  Unfortunately, this lead me to thinking about the security issues involved and how allowing PHP to write to a directory would open it to potential malicious attacks, yada yada yada, you all know the issues.  So I thought that I might be able to read the file before uploading it in the kind of circular logic that sometimes happens.  When I started into the AS3 docs to check on classes to help, I realized that my initial suspicions were correct and that in order to load and read the file locally, I could use AIR, have the user load up their XML file, process it and then send the resulting XML and info to the database directly (eliminating the need to send files to the server AND preventing the need to allow PHP to write to the server in this instance).
    So after a bit of reading and testing, I managed to modify my FLA to publish an AIR file, and started debugging.  My Word 2007 document worked fine - I create a File object and a FileStream object and they are easily able to access the file the user selects via the File.browseForOpen method.  I then run the processing code, which begins by creating an XML object from the data read from the file.  What's happening now is that while the Word 2007 document loads and processes without an issue, the Word 2003 document is causing a 1088 error: The markup in the document following the root element must be well-formed.
    I don't understand why this is happening since the same document in the same format was able to be loaded into an XML object when I used the URLLoader to grab the file.  The only thing I can conclude is that somehow the FileStream.readUTFBytes() method is somehow causing an issue.  I am able to trace out what is being read, but the file is lengthy and I haven't completed my analysis to see if and where the changes are occuring.
    If anyone has any experience with this type of situation, I'd really appreciate hearing about it.  Thanks in advance for any help you can provide.

    OK, it turns out that for some reason the Word 2003 XML document was being read with an extra character preceding the actual markup.  By dumping the stream into a string and then clipping the first character I was able to get the app running again.  Thanks for taking the time to read this thread! 

  • SQL - PHP - XML - Flex 2

    Howdy everyone!
    I've only been playing with Flex for about 6 weeks or so and
    I've figured out lots and lots from the online tutorials and help
    system. However the project that I'm trying to put together
    requires that I can pass data back and forth to Db's. I haven't
    even tried to write into a database yet because for the last 3
    weeks I've been trying every combination (except the working one's)
    to write my Db data into XML and use an HTTPService tag to retrieve
    it for use as dataProviders. I've tried everything remotely related
    on this site. Several others I've found online and modified the
    resultFormat and my variable types in every combination
    (resultFormat = "[' ', Object, xml, e4x, text, array]" &
    myDP:[ArrayCollection, Array, XML, XMLList, XMLListCollection]) and
    have received as many errors & nonworking results for my
    efforts. I'm not sure if perhaps there's a PHP/MySQL setting on my
    server that's not set how it should be? or if I just have failed to
    notice some simple detail.
    Here's the PHP version I currently believe most promising:
    quote:
    <?php
    require_once('Connections/peaceheartconnection.php');
    header("Content-type: text/xml");
    mysql_select_db($database_peaceheartconnection,
    $peaceheartconnection);
    $query_topics = "SELECT * FROM p_insight_topics";
    $topics = mysql_query($query_topics, $peaceheartconnection)
    or die(mysql_error());
    $row_topics = mysql_fetch_assoc($topics);
    $totalRows_topics = mysql_num_rows($topics);
    mysql_select_db($database_peaceheartconnection,
    $peaceheartconnection);
    $query_categories = "SELECT * FROM p_insight_types";
    $categories = mysql_query($query_categories,
    $peaceheartconnection) or die(mysql_error());
    $row_categories = mysql_fetch_assoc($categories);
    $totalRows_categories = mysql_num_rows($categories);
    print("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
    $dataXML = '';
    $dataXML .= "<data><categories>";
    while($cat = mysql_fetch_object($categories))
    $dataXML .= "<category>$cat->type</category>"
    $dataXML .= "</categories>";
    $dataXML .= "<topics>";
    while($topic = mysql_fetch_object($topics))
    $dataXML .="<topic>$topic->topic</topic>";
    $dataXML .= "</topics></data>";
    ?>
    <?php
    echo $dataXML;
    ?>
    <?php
    mysql_free_result($topics);
    mysql_free_result($categories);
    ?>
    This gives me results that show up in the browser identical
    to
    An XML file from
    "Flex 2 Training from the Source" (I event get the "no
    associated style information ... document tree is shown" message
    from Firefox).
    Here are the relevant parts of the Flex app:
    quote:
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    xmlns:ns1="Components.*" layout="absolute" autoLayout="true"
    horizontalScrollPolicy="off" verticalScrollPolicy="off"
    creationComplete=" getData()" >
    <!-- Service Definitions -->
    <mx:HTTPService id="getTypesNTopics" url="../../data.xml"
    method="POST" useProxy="false"
    result="showData(event)" fault="handleFault(event);" />
    <mx:HTTPService id="getTypesNTopics2"
    url="../../topicsNcategories5.php" method="POST" useProxy="false"
    result="showData2(event)" fault="handleFault2(event);" />
    <!-- End Service Definitions-->
    <mx:Script>
    <![CDATA[
    import mx.collections.XMLListCollection;
    import mx.effects.*;
    import mx.effects.easing.*;
    import mx.containers.*;
    import mx.core.*;
    import mx.rpc.events.ResultEvent;
    import mx.rpc.events.FaultEvent;
    import mx.events.FlexEvent;
    import mx.controls.Alert;
    import flash.events.*;
    import mx.managers.DragManager;
    import mx.events.DragEvent;
    import mx.collections.ArrayCollection;
    import mx.rpc.events.ResultEvent;
    import mx.rpc.events.FaultEvent;
    [Bindable] private var topicsAC:ArrayCollection = new
    ArrayCollection();
    [Bindable] private var categoryAC:ArrayCollection = new
    ArrayCollection();
    [Bindable] private var topics2AC:XMLListCollection = new
    XMLListCollection();
    public function getData():void
    getTypesNTopics.send();
    getTypesNTopics2.send();
    private function showData2(event:ResultEvent):void
    //topics2AC = event.result.data.topics.topic;
    lastResultValue2.text = "Event, Categories:"
    +event.result.data.categories.category
    + "Event, Topics:" + event.result.data.topics.topic;
    scrollMenu.dataProvider = event.result.data.topics.topic;
    lastResultValue2.text = "Result: " +
    String(event.result.data.topics.topic);
    private function handleFault2(event:FaultEvent):void
    lastResultValue2.text = "Error: " + event.fault;
    (Keep in mind that the function & service tag contents
    are just the latest version as of 20 mins ago.)
    Any help would be greatly appreciated. There are still dozens
    of other things I want to get working on but there's no point until
    I can get my app. to talk with mySQL (databases). I'm begging
    PLEASE after weeks of wasting time trying to get my <topic>
    & <category> nodes to populate two ComboBoxes I just
    wrote a static XML file last night--just so I could feel like I had
    accomplished something (that's what the first Service tag does).
    Thanks 2^65536 times!
    Todd

    As it is posted right now (resultFormat (rF) = default object
    with the result assigned directly), I don't receive an error but
    lastResultValue.text & scrollMenu (a comboBox) both read
    "$topic->topic."
    With rF = default (object) & topics2AC:ArrayCollection
    (assigned to the text & CB) I get: "Type Coercion failed:
    cannot convert "$topic->topic" to
    mx.collections.ArrayCollection. ..."
    With rF = e4x, data type (dT) = arrayCollection I get:
    "Error: [RPC Fault faultString="Error #1088: The markup in the
    document following the root element must be well-formed."
    faultCode="Client.CouldNotDecode" faultDetail="null"] "
    (e4x is the format that I WANT to use, but anything working
    will suffice for now)
    rF = xml, dT = AC: "Property data not found on
    flash.xml.XMLDocument and there is no default value."
    With the "xml version" tag removed rF = e4x, dT =
    XMLListCollection I get " Error #1034: Type Coercion failed: cannot
    convert "$topic->topic" to mx.collections.XMLListCollection."
    Likewise with dT=arrayCollection: "Error #1034: Type Coercion
    failed: cannot convert "$topic->topic" to
    mx.collections.ArrayCollection." (Same with dT=XMLList)
    The underlying code(source) of the PHP page's output is:
    "<data><categories><category>Poem</category>
    ...</categories><topics><topic>Teaching</topic>...<topic>Kids</topic></topics></data>"
    There's an empty line above the source. The <?xml version="1.0"
    encoding="utf-8"?> tag is/isn't there depending on whether I
    leave it in or not. I don't know how/why the empty line is there.
    The general result seems to be that I get either "cannot
    decode" using e4x, "cannot convert $topic->topic" using anything
    else. Perhaps the problem is still in the PHP, but Firefox
    recognizes & treats it as valid XML giving me the "
    This XML file does not appear to have any style information
    associated with it. The document tree is shown below.
    −
    <data>
    −
    <categories>
    <category>Poem</category>
    <category>Song</category>
    <category>Prayer</category>
    <category>Idea</category>
    <category>Whim</category>
    <category>Enlightenment</category>
    <category>Quote</category>
    <category>Answers</category> ..." when I call the
    page. So I'm at a loss as to what to even try anymore.
    Thanks again anyone, everyone
    Merry Christmas, Happy Hannukah, Happy Holidays, etc.
    Todd

  • XML Problem in Internet Explorer 6

    Hello, my site was with trouble when i try to see it on IE6,
    i have an xml object to load data from database to my flash site
    althought it work on IE 7 and Firefox in IE 6 the data didn't load.
    What is this problem ? Something with xml parser from IE6 or with
    the flash player and the IE6 , I will be happy if someone help me
    with it.
    See is thet code i used to load data from the XML, the data
    is loaded into an generic Object variable called noivaObj
    // carrega XML do hotsite da noiva
    var xmlItens:XML = new XML();
    xmlItens.ignoreWhite = true;
    xmlItens.onLoad = function(success:Boolean)
    var nodeHotsite = this.firstChild;
    var nodeNoiva = nodeHotsite.childNodes[0];
    var nodeFotos = nodeNoiva.childNodes[1];
    var nodeServicos = nodeNoiva.childNodes[2];
    var nodeMakingof = nodeNoiva.childNodes[3];
    // salva dados da noiva
    noivaObj.id = nodeNoiva.attributes.id;
    noivaObj.photoHome = nodeNoiva.attributes.photoHome;
    noivaObj.nome =
    nodeNoiva.childNodes[0].firstChild.nodeValue;
    noivaObj.thumb = nodeNoiva.attributes.thumb;
    noivaObj.uploadPath = nodeNoiva.attributes.uploadPath;
    // fotos da noiva
    for (i = 0; i < nodeFotos.childNodes.length; i++)
    var foto = nodeFotos.childNodes
    // insere fotos no objeto noiva
    noivaObj.fotos.imgPath = nodeFotos.attributes.imgPath;
    var path = noivaObj.uploadPath + "/" +
    noivaObj.fotos.imgPath;
    noivaObj.fotos.itens.push({
    thumb: path + "/" + foto.childNodes[0].firstChild.nodeValue,
    img: path + "/" + foto.childNodes[1].firstChild.nodeValue
    // servicos da noiva
    for (i = 0; i < nodeServicos.childNodes.length; i++)
    var servico = nodeServicos.childNodes;
    // insere servicos no objeto noiva
    noivaObj.servicos.push({
    id: servico.attributes.id,
    descricao: servico.firstChild.nodeValue
    // making of da noiva
    for (i = 0; i < nodeMakingof.childNodes.length; i++)
    var makingof = nodeMakingof.childNodes
    noivaObj.makingof.imgPath = nodeMakingof.attributes.imgPath;
    var path = noivaObj.uploadPath + "/" +
    noivaObj.makingof.imgPath;
    noivaObj.makingof.itens.push({
    id: makingof.attributes.id,
    thumb: path + "/" +
    makingof.childNodes[0].firstChild.nodeValue,
    img: path + "/" +
    makingof.childNodes[1].firstChild.nodeValue
    // nome da noiva
    titulo.nomeNoiva.text = noivaObj.nome;
    // foto principal do hotsite
    fotoNoiva.loadFoto(noivaObj.photoHome);
    xmlItens.onData = function(src:String)
    if (src == undefined) {
    this.onLoad(false);
    else {
    this.parseXML(src);
    this.loaded = true;
    this.onLoad(true);
    xmlItens.load('/../hotsite_noivas.xml.php?hotsiteId=' +
    hotsiteId);

    Thanks for the help. Well I figured out a way for inserting spaces using the character code
    My problem is little complicated. I wrote a servlet which gets an XML content from a App Server. I store this xml content in a String data type. I then display it on the browser using this command
    resp.setContentType("text/xml");
    resp.getOutputStream().write(respString.getBytes());
    where respString holds the xml content (String datatype).
    Now I need some kind of processing which parses the string to find the spaces at that particular xml tag and insert character code. Keeping in mind that there are several such xml tag elements where changes are to be made, writing my own program would be tedious.
    Is there any XML technologies which can transform that. (I'm not much aware of any XML technologies).Can anyone please provide a solution for it.
    Thanks.

  • XML problems with WM 5.0 emulator

    I have a FL 2.0 app that loads xml just fine. However, when I
    just tried it in the WM 5.0 320x240 emulator, it wouldn't load the
    xml, it gave an error, saying that the xml call was not associated
    with a key event or a mouse event. It's loaded through a function
    on the second frame, that shouldn't be a problem. Anyone else had
    this problem or know how to help me out? I did not think that the
    jump to 2.1 would be much of a challenge.
    It also runs full screen in the emulator, but off center, to
    the right.
    Any help is very much appreciated.

    Have you tested this on a device? Else we have a generic
    emulator for
    FlashLite 2.1(
    http://labs.adobe.com/wiki/index.php/Flash_Lite_2.1_Authoring)
    on Flash 8 professional. Can you try on a device or on
    FlashLite 2.1
    emulator with Flash 8?
    Regards,
    Vijayan.
    "bbonnet18" <[email protected]> wrote in
    message
    news:ej12gk$qf9$[email protected]..
    >I have a FL 2.0 app that loads xml just fine. However,
    when I just tried it
    >in
    > the WM 5.0 320x240 emulator, it wouldn't load the xml,
    it gave an error,
    > saying
    > that the xml call was not associated with a key event or
    a mouse event.
    > It's
    > loaded through a function on the second frame, that
    shouldn't be a
    > problem.
    > Anyone else had this problem or know how to help me out?
    I did not think
    > that
    > the jump to 2.1 would be much of a challenge.
    >
    > It also runs full screen in the emulator, but off
    center, to the right.
    >
    > Any help is very much appreciated.
    >

  • Spry Dataset and XML problem

    I think this problem is a result of my lack of knowledge regarding XML but hope someone can help set me straight.  I am using Spry datasets in several web pages all accessing HTML pages with data in tables format.  These work great.
    I would like to use XML files for some other data on another site I am working on and while the Spry Dataset wizard allows me to call the XML file the information I get in the Row Element panel and the Data Preview panel appear to have nothing to do with the XML file I am accessing.  I am expecting a list of US states and instead get a heading called Types with Default and Override as the two indented lines beneath type.
    I have tried several other xml files that I have created or downloaded as samples from the web and always get the same headings.
    I am trying to insert into a plain vanilla HTML page.
    What am I doing wrong? I have attached the XML file I am using
    Hope someone can help.
    Cheers
    les

    You cannot do cross domain requests with Ajax, you will need to use a server side transporter / proxy to get the file for you.
    Heres a nice proxy for PHP:
    http://webreflection.blogspot.com/2009/05/php-full-proxy-work-in-progress.html

  • Conversion of FMB to XML problem

    Forms [32 Bit] Version 9.0.4.0.19 (Production)
    I am in the middle of a conversion project where we are converting fmb files to xml, making the required changes to the xml files using a conversion program, and then converting them back to fmb. When compiling the the fmb files, I noticed that there were compilation errors in a few of the forms. Checking original xml code for one of the forms that did not compile, it did not contain the trigger text for one of my post-change triggers. The block actually contains two items with the same identical post-change trigger. Only the trigger text for one of the items is written. The following shows the trigger for the "RECEIVED_TODAY" written properly, but the next item with the identical trigger does not have the trigger text:
    <Item Name="RECEIVED_TODAY" FontName="Arial" .... MaximumLength="10">
    <Trigger Name="POST-CHANGE"
    TriggerText=":in_po_detail.qty_received :=
    :in_po_detail.qty_received + nvl(:in_po_detail.received_today,0);
    &#10; &#10;get_due;" DirtyInfo="true" />
    </Item>
    <Item Name="RETURNED_TODAY" FontName="Arial" .... MaximumLength="10">
    <Trigger Name="POST-CHANGE" DirtyInfo="true" />
    </Item>
    If I delete and re-create the trigger for the item that is not written, it will write the corresponding xml out properly.
    Does anyone know why this is happening?

    Peter,
    sound strange and my guess is that this should be looked at by customer support. Is the Forms module originally build in Forms 9.0.4 or is it upgraded from a previous version of Forms?
    I found bug 2923866 that reports a similar case where the trigger was subclassed from a form or library. In this case the trigger text wasn't in the XML output and showed only if created in the Forms. Not sure if this is the same problem you are facing.
    Frank

  • Dreamweaver, php-xml bug

    I have a simple php file that generates an xml file. When I
    save this file and close it, dreamweaver changes some of the
    formatting when I reopen the file. Specifically, dreamweaver
    de-capitalizes some of the text in the document.
    Example:
    The code:
    $this->xml_request = '
    <PickupType>
    <Code>01</Code>
    </PickupType>';
    is converted to
    $this->xml_request = '
    <PickupType>
    <code>01</code>
    </PickupType>';
    after the file is saved, closed, and reopened. Note the Code
    tag has been chanced to code, which breaks the API I'm working
    with. This xml is always within php code as above as I've been
    using it..
    This happens on several fields, Code and Address so far, and
    happens to the same fields every time, no matter the document, or
    how many times they appear in the document. No other tag names are
    affected as far as I've found. I've tried completely uninstalling,
    removing all configuration files, and re-installing Dreamweaver and
    get the exact same affect every time.
    I really need to get this bug / mis-configuration fixed. Any
    suggestions would be greatly appreciated.
    This is CS3 (DW9) running on XP Pro.

    jestep,
    In Preferences > Code Format, make sure that the "Override
    case of"
    settings for "Tags" is turned off.
    HTH,
    Randy
    > I have a simple php file that generates an xml file.
    When I save this file and
    > close it, dreamweaver changes some of the formatting
    when I reopen the file.
    > Specifically, dreamweaver de-capitalizes some of the
    text in the document.
    >
    > Example:
    >
    > The code:
    > $this->xml_request = '
    > <PickupType>
    > <Code>01</Code>
    > </PickupType>';
    >
    > is converted to
    >
    > $this->xml_request = '
    > <PickupType>
    > <code>01</code>
    > </PickupType>';
    >
    > after the file is saved, closed, and reopened. Note the
    Code tag has been
    > chanced to code, which breaks the API I'm working with.
    This xml is always
    > within php code as above as I've been using it..
    >
    > This happens on several fields, Code and Address so far,
    and happens to the
    > same fields every time, no matter the document, or how
    many times they appear
    > in the document. No other tag names are affected as far
    as I've found. I've
    > tried completely uninstalling, removing all
    configuration files, and
    > re-installing Dreamweaver and get the exact same effect
    every time.
    >
    > I really need to get this bug / mis-configuration fixed.
    Any suggestions would
    > be greatly appreciated.
    >

Maybe you are looking for