Php 5 on webserver 7

Dear All,
I have tried to configure php on webserver 7 by referring to the following doc
http://docs.sun.com/source/820-1090/PHPReleaseNotes.html#12
neither of the fast-cgi nor the NSAPI worked
------fast-cgi-----
[11/Feb/2009:20:42:05] config (18947): for host 10.126.21.5 trying to GET /form.php, handle-processed reports: HTTP2205: The request method is not applicable to the requested resource.
-----NSAPI--------
[11/Feb/2009:20:47:12] failure (19227): for host 10.126.21.5 trying to GET /file.php, responder-fastcgi reports: FCGI1010: could not change the working directory of the application process
[11/Feb/2009:20:47:12] failure (19227): for host 10.126.21.5 trying to GET /file.php, responder-fastcgi reports: FCGI1073: Unable to service the request even after trying 0 times
what might be the cause?
Even I looked to this doc
http://developers.sun.com/webtier/reference/techart/php2.html
didnt understand waht i should be pointing to in this section
NameTrans fn="pfx2dir" from="/cgi-bin"
dir="/export/my/cgi" name="cgi"
Any directory !! even if it doenst exist?
Thanks for the help,
Scotty

neither of the fast-cgi nor the NSAPI worked Can you share your obj.conf settings ?
>
------fast-cgi-----
[11/Feb/2009:20:42:05] config (18947): for host 10.126.21.5 trying to GET /form.php, handle-processed reports: HTTP2205: The request method is not applicable to the requested resource.
One of the reasons could be the missing .php mime type setting within mime.types file.
-----NSAPI--------
[11/Feb/2009:20:47:12] failure (19227): for host 10.126.21.5 trying to GET /file.php, responder-fastcgi reports: FCGI1010: could not change the working directory of the application process
[11/Feb/2009:20:47:12] failure (19227): for host 10.126.21.5 trying to GET /file.php, responder-fastcgi reports: FCGI1073: Unable to service the request even after trying 0 times
Have you specified "chdir" parameter ? Also check 'Fastcgistub.log' file (will be in Web Server's temp directory) for errors.
didnt understand waht i should be pointing to in this section
NameTrans fn="pfx2dir" from="/cgi-bin"
dir="/export/my/cgi" name="cgi"
Any directory !! even if it doenst exist?
No, the directory should exist. Above directive converts URI to physical path.
e.g., Web Server tries to execute */export/my/cgi/simple.cgi* script when you send request to */cgi-bin/simple.cgi*

Similar Messages

Issues with Error #2048 on deployed Flex/PHP Web Application

Hello,
I'm testing out Flash Builder for PHP and I'm running into the following error when deploying to a web servers:
Send failed
Channel.Security.Error error Error #2048 url: 'http://testsite.dreamhosters.com/LocatorPHP/public/gateway.php'
I have looked though documentation and tutorials without any luck. My application works great on the local Zend Server setup but as soon as I jump to a remote web server I get problems.
Here's what I've tried:
1) crossdomain.xml in web root
2) amf_config.ini updated so zend framework on server and gateway.php are reachable (connecting to gateway.php directly gives me no errors)
3) attemped to change the flex server option in my project but Flash Builder for PHP will not allow me to change this, so I had to change my php service.as endpoint entry to the gateway.php on the webserver
Is there a log that can help me troubleshoot the error?
Thanks in advance.

Any solution I have just ran into the same issue. App works perfect on localhost phpmyadmin as soon I change everything to our public server ERROR#2048
I have tried same as above no results.
After countless hours of searching this worked for me!!!!
http://forums.adobe.com/thread/674871

PHP Update and Modularization

The PHP package was rebuilt in order to provide more functionality while
reducing explicit dependencies and memory usage. This was achieved by
building most PHP modules as shared objects instead of building them
statically in.
In addition to this it is easier to use and package external PHP modules and
its configuration due to the possibility to have a separate config file for
every extension. Those ini files are stored in /etc/php/conf.d/ and will
automatically used by PHP.
If you are using PHP on a webserver connected to the internet you might be
interested in installing the php-suhosin package as well which was moved from
the [community] into the [extra] repository. Along with the suhosin-patch
which ships with the current PHP packge this extension provides some advanced
security features. For some more information on this see
http://www.suhosin.org.
The packages will remain in [testing] for at least a few days. Please test
this package with your favorite scripts and report any error or suggestions:
http://bugs.archlinux.org
If you update from a previous PHP setup, take care of the following changes:
* Due to the modularization you have to enable some modules which were
built-in before. For a quick overview compare the modules section at the
bottom of your php.ini with the new one which will be stored as
php.ini.pacnew
* PHP itself does not have any explicit dependencies, but some extensions will
only work with certain package installed. Those will be displayed during the
installation.
* If you are using any PHP extension from [community] or AUR you will have
to rebuild them against this PHP version. As soon as this package arrives in
[extra], all extensions in [community] will be updated.
Pierre

Pierre wrote:
Well, you changed this in my.cnf then, right? By defaulkt Arch uses /tmp/mysql.sock (see http://cvs.archlinux.org/cgi-bin/viewcv … vs-markup). Any reason for changing this? In contrast to /tmp /var/tmp is persistent among rebooting.
Anyway: Did this work with the previous version of php? Does phpinfo show your changes to the socket location?
Everything was fine with the previous version. I upgraded to testing version 5.2.4-4 and mysql connection got broken. There's a silly enterprise application we use and if the mysql.sock file is in /tmp it gives security errors. That's why i need to change default config. Below is a screenshot from phpinfo.

CSS property Inspector shows no properties when inspecting .php file

Hello,
i`m trying to use the new Dreamweaver CS5 ability to inspect files from my joomla CMS. The site is working, has a testing server and i can browse through the site in Live View mode. Also splitscreen with Liva Data and Live View mode is working fine. But when pressing the inspect-button, the single elements are shown in Live View mode (with all the colored padding and margin boxes around each element) but there are NO CSS-properties shown in the CSS properties inspector except for one inline-style: font-size: 100% which one can see as a body-property in live data view.
Is there a error in configuring Dreamweaver or is this problem caused by joomla? There is a video at Adobe-TV in which Dreamweaver manages Wordpress files and works just fine.
Help would be great!
Dennis

Hello Hans-G,
its not yet published. But i can give you all infos about version and stuff:
Einstellung Wert
PHP erstellt für:
SunOS localhost 5.10 Generic_139556-08 i86pc
Datenbankversion:
5.0.91-log
Datenbankzeichensatz:
utf8_general_ci
PHP-Version:
5.2.14
Webserver:
Apache/2.2.17 (Unix)
PHP-Anbindung zum Webserver:
cgi
Joomla!-Version:
Joomla! 1.5.22 Stable [ senu takaa ama woi ] 04-November-2010 18:00 GMT
Browserkennung:
Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12 GTB7.1
Dennis

Php web site problem - after loding the web site blank white page

Hi Guys
i've set up Mac server with 10.6.2 its running 3 web sites . the problem is when i upload the web files in to my Mac server and start to browsing from my laptop via internet, web site is not loading. So i upload the sample web page just as a simple html file. its working fine , But when i upload this php web site problem agin . problem : site is loading from loading bar, But i can not see anything from browser just white page , no page source nothing ......
any suggestions ?

This is the Error from Server Admin
ing: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 184
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:38 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:41 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:51:42 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 184
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 193
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 217
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Assigning the return value of new by reference is deprecated in /Library/WebServer/Documents/kortxpress/administrator/components/com_joomfish/c lasses/JoomfishManager.class.php on line 226
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function eregi() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 188
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 189
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: strtotime(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 56
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: date(): It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the datedefault_timezoneset() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Berlin' for 'CEST/2.0/DST' instead in /Library/WebServer/Documents/kortxpress/libraries/joomla/utilities/date.php on line 198
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-onl ine.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 47
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-off line.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 52
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-online.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 57
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Warning: copy(/Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/livechat-lar ge-offline.jpg): failed to open stream: No such file or directory in /Library/WebServer/Documents/kortxpress/modules/mod_jlivechat/helper.php on line 62
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:53:22 2010] [error] [client 91.127.146.71] PHP Deprecated: Function split() is deprecated in /Library/WebServer/Documents/kortxpress/plugins/system/jfrouter.php on line 594
[Mon Apr 12 14:57:23 2010] [notice] caught SIGTERM, shutting down
[Mon Apr 12 14:57:56 2010] [warn] module php5_module is already loaded, skipping
[Mon Apr 12 14:57:57 2010] [notice] Apache/2.2.13 (Unix) PHP/5.3.0 configured -- resuming normal operations
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:46 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Notice: A session had already been started - ignoring session_start() in /Library/WebServer/Documents/discard/config.php on line 2
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Warning: require_once(/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php ): failed to open stream: No such file or directory in /Library/WebServer/Documents/discard/index.php on line 5
[Mon Apr 12 14:58:48 2010] [error] [client 91.127.146.71] PHP Fatal error: require_once(): Failed opening required '/Library/WebServer/Documents/discardclasses/mysql/DBConnection.php' (include_path='.:/usr/lib/php') in /Library/WebServer/Documents/discard/index.php on line 5

Mysql on Lion

Hi,
I am trying to get mysql and myphpadmin set up on a laptop with lion. When I try to start myphpadmin I get this error "Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly." From the preference pane for mysql it appears that mysql is working. Can anyone point me in the correct direction on how to solve this? Thanks.

That Preference Pane is ancient and decrepit. You need to do a little hacking to setup MySQL properly. See my tutorial for more details.
Basically, you need to get rid of the Preference Pane and startup item
Create a proper launchd config file
Create a MySQL config file that creates a socket where MacOS X PHP expects to find it.

Ajax for Flash in IE problem

Currently I'm doing a project that requires to deploy ajax
with a Flash object. I use the fscommand for Flash to communicate
with javascript in order to do the Ajax.
I create a flash file name ask.fla. In the file I make a
button and add the script for it like this:
on(press)
fscommand ("send_var", 1);
I have read in the manual of Flash how to make flash
communicate with javascript, and I have configure the publish
setting of HTML file to run "Flash with FSCommand" .
I have another 2 files namely: ask.php and ask_get.php.
The content of the ask.php file is:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>ask</title>
</head>
<body bgcolor="#ffffff"
onload="makeRequest('ask_get.php','?test=10');">
<script language="JavaScript">

</script>


<div name="myspan" id="myspan"></div>
</body>
</html>
The content of the ask_get.php is:
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
id="ask" width="462" height="410" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="ask.swf" /><param
name="quality" value="high" /><param name="bgcolor"
value="#ffffff" /><embed src="ask.swf" quality="high"
bgcolor="#ffffff" width="462" height="410" swLiveConnect=true
id="ask" name="ask" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
The purpose of the two file is that when the file ask.php is
called, the code in the even <body onload> will call the
makeRequest function, which replate the <div name="myspan"
id="myspan"> with the code in the file ask_get.php, so that the
flash object is embed indirectly in the file.(but it will be shown,
and some how I use it to make the ajax for the page).
When I run the file ask.php in my webserver in Mozilla
FireFox, it run well, the flash file can call the javascript
function, but when I run the file ask.php in IE, the flash file can
not do anything, it can not call the javascript function.
You can check this by running the file ask.php in both
FireFox and IE in your webserver (IIS or Apache).
If the code to embed the swf object in php file is written
directly in the very php file the swf object can contact with
javascript very well and correctly
, as you can test it by running the file ask1.php in both IE
and FireFox in your webserver (IIS or Apache) , when you click the
button, it will show you the message "HELLO" which is call from a
javascript function.
Here is the code of the file ask1.php, which embed the flash
object directly in the php file and it works well in both FireFox
and IE:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xml:lang="en" lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>ask</title>
</head>
<body bgcolor="#ffffff"
onload="makeRequest('ask_get.php','?test=10');">
<script language="JavaScript">

</script>
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
id="ask" width="462" height="410" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="ask.swf" /><param
name="quality" value="high" /><param name="bgcolor"
value="#ffffff" /><embed src="ask.swf" quality="high"
bgcolor="#ffffff" width="462" height="410" swLiveConnect=true
id="ask" name="ask" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</body>
</html>
The problem is when I call an object by replacing the <div
id=...> with the code for the flash object from the ask_get.php
file, only FireFox can call the javascript but IE does not.
So anyone who know the reason why, please tell me. Thank you
very much.

Be sure your HTML wrapper is embedding the flash object correctly in IE. In all other browsers it can be embedded as an object of a specific type. IE has always required a separate install of an activeX with a certain CLSID.
Look up SWFObject and use that to embed your SWF to be sure that it's being embedded properly for each browser, or use the HTML generated by flash and make sure your publish settings that you have "FSCommand" selected in the drop-down so flash can talk to the browser.

Apache error log shows localhost requests going to /var/empty

( 1 )'/etc/apache2/httpd.conf' shows the DocumenRoot as '/Library/WebServer/Documents', as has been standard for previous OSX versions.
( 2 ) Create a simple php file 'local_info.php' and drop it into the DocumenRoot.
( 3 ) try to access : https://localhost/local_info.php
( 4 ) the page is not served, and I get a 'Not Found' error.
( 5 ) Go to '/var/log/apache2/error_log'
[Sat Feb 04 15:21:48 2012] [error] [client ::1]
    script '/var/empty/local_info.php' not found or unable to stat
( 6 ) If I go to 'System Preferences -> Sharing -> Web Sharing' and restart Apache, then try to access the page nothing changes, the 'Not Found' error persists.
( 7 ) If I copy 'local_info.php' from '/Library/WebServer/Documents/local_info.php' to '/var/empty/local_info.php' and then point the browser to
( 8 ) try to access : https://localhost/local_info.php
      the page is displayed correctly.
This is basically pretty much pristine copy of 'OS X Lion -> OS X Lion Server' with 'Server.app -> Services -> Web' turned off for the moment. During this testing phase I am only trying '/Library/WebServer/Documents', and not the virtual hosts.
I have the virtual hosts working very well through 'Server.app -> Services -> Web' which like I said above is turned off for the moment. The only problem I ran into there was that '/etc/hosts' was not being modified when a new virtual host was added via 'Server.app -> Services -> Web', but that was under OS X Server Lion 10.7.2, since I created the virtual hosts, I installed the Combo Updater for Lion Server 10.7.3, and I have not tried to create any new virtual hosts since then.
It is interesting that towards the bottom of httpd.conf there are some flags that load different pieces of code depending upon what flags are set. What is even more interesting is that both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' use one common '/etc/apache2/httpd.conf' file, which depending upon which flags are set during Apache startup load different config code. At least I think it is interesting...
These are the flags I noticed in /etc/apache2/httpd.conf
<IfDefine !MACOSXSERVER>
<IfDefine MACOSXSERVER>
<IfDefine WEBSERVICE_ON>
<IfDefine !WEBSERVICE_ON>
<IfDefine WEBSHARING_ON>
# Here only 'System Preferences -> Sharing -> Web Sharing' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSHARING_ON
# Here only 'Server.app -> Services -> Web' is running
$ ps aux | grep httpd
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON
$
# Here both 'Server.app -> Services -> Web', and 'System Preferences -> Sharing -> Web Sharing' are running
$ ps aux | grep httpd
_www            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
root            ... /usr/sbin/httpd -D FOREGROUND -D MACOSXSERVER -D WEBSERVICE_ON -D WEBSHARING_ON
$
Here's some handy stuff that is echoed to my terminal for easy access
# Some handy commands to access the files I use regularly...
sudo open -a /Applications/BBEdit.app /etc/hosts
sudo open -a /Applications/BBEdit.app /etc/php.ini
sudo open -a /Applications/BBEdit.app /etc/bashrc
open -a /Applications/BBEdit.app ~/.bash_profile
open -a /Applications/BBEdit.app ~/.bashrc
open -a /Applications/BBEdit.app ~/.bash_history
# Or I can open all three at the same time
open -a /Applications/BBEdit.app /etc/bashrc ~/.bash_profile ~/.bashrc
To (show|hide) files set AppleShowAllFiles (true|false) and kill the finder
defaults write com.apple.Finder AppleShowAllFiles true
KillAll Finder
Hopefully Apple will get this problem fixed quickly so that 'System Preferences -> Sharing -> Web Sharing' works correctly...
Bill Hernandez
Plano, Texas

I've learned some interesting things since I posted the original message on this thread a couple of days ago.
I had looked at the 'Include directives towards the bottom of httpd.conf, and I did a quick search on 'DocumentRoot' and hit the 'previous' button in BBEdit's find dialog. Sure enough it came up with:
DocumentRoot "/Library/WebServer/Documents"
However if I would have started the search from the top of the document I would have noticed that '/var/empty' that I found in the logs was not a bug, not an error, but by design.
If I would have gone a few lines further up I would have seen :
<IfDefine MACOSXSERVER>
DocumentRoot /var/empty
which explains it all. How incredibly cool, this is really clever!
This morning I went back to httpd.conf
sudo open -a /Applications/BBEdit.app /etc/apache2/httpd.conf
and right at the top of the document staring me right in the face was:
# Mac OS X / Mac OS X Server
# The <IfDefine> blocks segregate server-specific directives
# and also directives that only apply when Web Sharing or
# server Web Service (as opposed to other services that need Apache) is on.
# The launchd plist sets appropriate Define parameters.
# Generally, desktop has no vhosts and server does; server has added modules,
# custom virtual hosts are only activated when Web Service is on, and
# default document root and personal web sites at ~username are only
# activated when Web Sharing is on.
Basically on the Lion Server you are not relying on DocumentRoot, everything is done via the VIrtual Hosts in 'Server.app -> Services -> Web'.
The default Virtual Host when you first launch 'Server.app -> Services -> Web' is <whatever_hostname_you_gave_your_computer>.local, and it points to /Library/Server/Web/Data/Sites/Default, at this point there is no localhost defined as you are used to seeing, there is only /var/empty.
As soon as you create a localhost Virtual host in 'Server.app -> Services -> Web', and the instance of Apache stops and restarts everything works as expected, http://localhost shows a webpage with 'It works!'.
The moral to this whole story is that after having read/modified countless httpd.conf documents, and manually creating the Virtual Hosts, and Includes, and not bothering to read '/etc/apache2/httpd.conf' for Lion Server, it is currently printing and I have my yellow highlighter ready so I can go through it and expand the wisdom level from none to minimal...
I am off to read !
Oh, one thing I did do is drop a copy of a 'local_info.php' that I created that provides some info during testing while I am figuring all this out, but basically the gist is that I put this : <?php echo(__FILE__); ?> along with some other little bits of info anytime the page was hit. I dropped it into several of the virtual hosts I created to make sure I understand how this is all working.

PhpMyAdmin not starting

I have IIS, MySQL, and PHP installed on my local computer
running XP
Pro. All works fine as a testing server in DW CS3. However,
when I try
to start phpMyAdmin I get a red error box that has this
error:
"Cannot start session without errors, please check errors
given in your
PHP and/or webserver log file and configure your PHP
installation properly."
I have the following variables set, but there is no log file
being
produced, so no additional error information.
session.save_path 'C:\WINDOWS\Temp'
error_log c:\php.log
log_errors On
I can run php scripts, but not phpMyAdmin.
I can not think of anything else to do. Ideas?
Thanks,
Harvey

Dooza wrote:
> eclipsme wrote:
>> SnakEyez02 wrote:
>>> You can also check your web server logs because
the PHP log might not
>>> show the error. These could be caused due to
insufficient privileges
>>> on the Temp directory or insufficient space in
the directory.
>>>
>>> Also it is not mentioned in your post, but I
think we can safely
>>> assume that mySQL starts and stops without
problem so that as we work
>>> on this issue we know when it is solved,
correct?
>> mysql-nt.exe shows up in the task manager. Also
there is a log entry
>> in event properties "...ready for connections" and
also "normal
>> shutdown". So yes, I think it is starting and
stopping ok.
>>
>> I added iuser to the temp folder with full rights,
but no change.
>>
>> Where would I find the IIS log? I see nothing in the
event viewer, nor
>> under iis in the control panel.
>>
>> Thanks,
>> Harvey
>
> They are in your windows log folder,
windows/system32/logfiles/
>
> Steve
Thanks Steve. Here is the IIS log when I run
localhost/phpmyadmin/main.php from my browser. All 3 files
referenced in
the log file exist. Beyond that, I don't know what to do.
#Software: Microsoft Internet Information Services 5.1
#Version: 1.0
#Date: 2008-08-07 16:09:04
#Fields: time c-ip cs-method cs-uri-stem sc-status
16:09:04 127.0.0.1 GET /phpmyadmin/main.php 302
16:09:04 127.0.0.1 GET /phpmyadmin/error.php 200
16:09:04 127.0.0.1 GET /phpmyadmin/favicon.ico 200
Thanks, Harvey

Trying to install php 5 broke my webserver

I wanted to use the image creating GD2 capabilities of php and I heard I had to update the version of php currently used in Mac OS X 10.4.8. So I followed the directions on the site (http://www.entropy.ch/software/macosx/php/) and downloaded the version 5.0.2 for PPC and Intel for Apache 1.3. I ran the installer. It seemed to run fine.
Since I installed php5, the apache webserver shut down. It will no longer start (either using System Preferences->Sharing or the Terminal command, "sudo apachectl graceful"). I even tried restarting, but the problem persists. I had it up and running fine, hosting my website for several years. When I type "sudo apachectl graceful", I get the following error...
www:/usr/local/php5/bin myusername$ sudo apachectl graceful
Password:
/usr/sbin/apachectl graceful: httpd not running, trying to start
Processing config directory: /private/etc/httpd/users/*.conf
Processing config file: /private/etc/httpd/users/+entropy-php.conf
Processing config file: /private/etc/httpd/users/myusername.conf
/usr/sbin/apachectl: line 193: 321 Bus error $HTTPD
/usr/sbin/apachectl graceful: httpd could not be started
My Configuration
Apache: 1.3.33
Mac OS 10.4.8 with all the software updates run to present (Monday December 18, 2006).
Running on a PPC.
As you can see, I have the latest software and have never installed php before. I have just used the version that came with 10.4.8.
Do you have any idea why my webserver is no longer running after running the php5 installer at that site?
Thank you in advance for any help anyone can give me. If I knew this would happen, I never would have downloaded it. I assumed it would reside safely in its own folder (/usr/local/php5) and not trample my webserver. At this point, I would like to get my webserver back up and running as soon as possible either with or without the php version 5.
Any ideas?

I have tried resetting the mysql
password for root following the directions on
mysql.com, but it is not working.
Can you post a link to the page with the directions you used? I messed around with MySQL changing passwords for a bit, though I cheerfully admit I didn't try to reset the root password. But the directions look like they should work the same for any user.
Basically, I followed the last alternative on this page, except that I didn't have to use --skip-grant-tables, instead, I just logged in as the root user. I did the update like they show:
<pre class="command">UPDATE mysql.user SET Password=PASSWORD('newpwd') WHERE user='root';</pre>Except that since I wasn't changing the root user, I used a different username. Then I had to reload the grants tables:
<pre class="command">FLUSH PRIVILEGES;</pre>Once I did that, the new password was good to go.
One thing I found was that I kept mis-typing the password when I tried to log in. Or I'd mis-typed it when I updated the table, so I found that one really handy thing you can do is to look at the password that's stored and compare it to what you might be typing. For example, once I type in the new password ('newpwd', I could look at it like so:
<pre class="command">mysql> select host,user,password from mysql.user;
--------------+------------+------------------
| host | user | password |
--------------+------------+------------------
| localhost | root | 43adcaeb639dab47 |
| 192.168.1.nn | usern01 | 43adcaeb639dab47 |
| localhost | userno2 | 43adcaeb639dab47 |
| localhost | userno3 | 43adcaeb639dab47 |
--------------+------------+------------------
4 rows in set (0.00 sec)</pre>Ordinarily, you'd probably have different passwords there. By itself, the display you see there isn't too helpful. But you can also check your password like this:
<pre class="command">mysql> SELECT PASSWORD('newpWd');
| PASSWORD('newpWd') |
| 43916d0b63bad907 |
1 row in set (0.00 sec)</pre>Notice how it's different just because of the different case of the "W". The difference between a "W" and "w" is pretty obvious, but if you have a "1" or an "l", they can look pretty similar in your password, same thing with "O" and "0".
charlie

Php plugin 1.0 for sun java system webserver

Hi,
I installed php plugin 1.0 for sun java system webserver 7. But it supports default 2 DB mysql and postgresql. Can i configure oracle 10g DB support?
Appreciate if you could throw some light on this.
Thanks,
Krish

Using PHP with NSAPI plugin will definitely get you the best performance. However, if you are using PHP with NSAPI plugin enabled then you might have to be careful when you are installing any of the PHP extensions from PECL to make sure that they are thread safe.
Note: There can be a potential issue only when using any of PECL (http://pecl.php.net) extension and not with any PEAR (http://pear.php.net) extensions.
For example, if you PHP built for NSAPI and then using on top of WordPress or Drupal or on top of frameworks like ZF etc should not be a problem
To compile PHP 5.3 with NSAPI, you would do some thing like
./configure --with-nsapi=<web-server7-install-directory>
To compile PHP 5.3 with FastCGI, you would do some thing like
./configure enable-cgi enable-force-cgi-redirect

Help SAPRFC extension PHP 5.3.6 running on Windows 2008 R2, IIS webserver

Dear all,
Can any body help me? how to connect saprfc on php 5.3.6 and running in IIS webserver?
thanks
gofur

Dear all,
Can any body help me? how to connect saprfc on php 5.3.6 and running in IIS webserver?
thanks
gofur

Joomla on Sun webserver 7 php safe_mode

Hi,
Trying to install joomla on solaris 10 with sun webserver 7 and mysql. Got php installed and working fine, but when going through the joomla config, it needs safe_mode to be set to Off. However, when I make this change in the php.ini file its not reflected in phpinfo(). Its like its still set to on. I have confirmed that the php.ini settings are being read as other changes are reflected. Just seems to have a problem with this setting. Any ideas?
Thanks,
Darren

I installed php using the phppack and followed the sun docs. sun/webserver7/plugins/php
Also, with suns pack I think safe_mode is On by default from what I can tell.
Thoughts?
OUTPUT:
PHP Version 5.2.0
System SunOS joomla.lethbridgecollege.ab.ca 5.10 Generic_118833-33 sun4u
Build Date Jan 29 2007 22:23:57
Configure Command './configure' '--prefix=/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php' '--bindir=/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/bin/' '--libdir=/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib/' '--libexecdir=/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/libexec/' '--enable-force-cgi-redirect' '--disable-rpath' '--enable-safe-mode' '--enable-ftp' '--enable-sockets' '--enable-memory-limit' '--enable-inline-optimization' '--enable-zlib' '--enable-soap' '--with-dba' '--enable-sysvmsg' '--enable-sysvsem' '--enable-sysvshm' '--enable-sqlite-utf8' '--enable-zend-multibyte' '--enable-bcmath' '--enable-exif' '--enable-magic-quotes' '--enable-wddx' '--enable-mbstring' '--enable-mbstr-enc-trans' '--enable-mbregex' '--enable-gd-native-ttf' '--with-pcre-regex=/h/iws-files/s/b/c/pcre/6.7/SunOS5.8_OPT.OBJ' '--with-iconv-dir=/h/iws-files/s/b/c/libiconv/1.11/SunOS5.8_OPT.OBJ' '--with-libxml-dir=/h/iws-files/s/b/c/libxml2/2.6.27/SunOS5.8_OPT.OBJ' '--with-zlib=/h/iws-files/s/b/c/zlib/1.2.3/SunOS5.8_OPT.OBJ' '--with-mysql=/h/iws-files/s/b/c/mysql/5.0.27/SunOS5.8_OPT.OBJ' '--with-mysqli=/h/iws-files/s/b/c/mysql/5.0.27/SunOS5.8_OPT.OBJ/bin/mysql_config' '--with-pgsql=/h/iws-files/s/b/c/postgresql/8.1.5/SunOS5.8_OPT.OBJ' '--enable-cli' '--enable-cgi' '--enable-fastcgi' '--enable-debugger'
Server API CGI/FastCGI
Virtual Directory Support disabled
Configuration File (php.ini) Path /java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib/
PHP API 20041225
PHP Extension 20060613
Zend Extension 220060519
Debug Build no
Thread Safety disabled
Zend Memory Manager enabled
IPv6 Support enabled
Registered PHP Streams php, file, data, http, ftp, compress.zlib
Registered Stream Socket Transports tcp, udp, unix, udg
Registered Stream Filters string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, convert.iconv.*, zlib.*
This program makes use of the Zend Scripting Language Engine:
Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies
PHP Credits
Configuration
PHP Core
Directive Local Value Master Value
allow_call_time_pass_reference On On
allow_url_fopen On On
allow_url_include Off Off
always_populate_raw_post_data Off Off
arg_separator.input & &
arg_separator.output & &
asp_tags Off Off
auto_append_file no value no value
auto_globals_jit On On
auto_prepend_file no value no value
browscap no value no value
default_charset no value no value
default_mimetype text/html text/html
define_syslog_variables Off Off
detect_unicode On On
disable_classes no value no value
disable_functions no value no value
display_errors On On
display_startup_errors Off Off
doc_root no value no value
docref_ext no value no value
docref_root no value no value
enable_dl On On
error_append_string no value no value
error_log no value no value
error_prepend_string no value no value
error_reporting no value no value
expose_php On On
extension_dir /java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib//extensions/no-debug-non-zts-20060613 /java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib//extensions/no-debug-non-zts-20060613
file_uploads On On
highlight.bg #FFFFFF #FFFFFF
highlight.comment #FF8000 #FF8000
highlight.default #0000BB #0000BB
highlight.html #000000 #000000
highlight.keyword #007700 #007700
highlight.string #DD0000 #DD0000
html_errors On On
ignore_repeated_errors Off Off
ignore_repeated_source Off Off
ignore_user_abort Off Off
implicit_flush Off Off
include_path .:/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib//php .:/java/re/phppack/5.2.0/nightly/ws/b01-2007-01-29/solaris-sparc/dist/5.2.0/SunOS5.8_OPT.OBJ/php/lib//php
log_errors Off Off
log_errors_max_len 1024 1024
magic_quotes_gpc On On
magic_quotes_runtime Off Off
magic_quotes_sybase Off Off
mail.force_extra_parameters no value no value
max_execution_time 30 30
max_input_time -1 -1
memory_limit 16M 16M
open_basedir no value no value
output_buffering 0 0
output_handler no value no value
post_max_size 8M 8M
precision 14 14
realpath_cache_size 16K 16K
realpath_cache_ttl 120 120
register_argc_argv On On
register_globals Off Off
register_long_arrays On On
report_memleaks On On
report_zend_debug On On
safe_mode On On
safe_mode_exec_dir /usr/local/php/bin /usr/local/php/bin
safe_mode_gid Off Off
safe_mode_include_dir no value no value
sendmail_from no value no value
sendmail_path /usr/lib/sendmail -t -i /usr/lib/sendmail -t -i
serialize_precision 100 100
short_open_tag On On
SMTP localhost localhost
smtp_port 25 25
sql.safe_mode Off Off
track_errors Off Off
unserialize_callback_func no value no value
upload_max_filesize 2M 2M
upload_tmp_dir no value no value
user_dir no value no value
variables_order EGPCS EGPCS
xmlrpc_error_number 0 0
xmlrpc_errors Off Off
y2k_compliance On On
zend.ze1_compatibility_mode Off Off
bcmath
BCMath support enabled
ctype
ctype functions enabled
date
date/time support enabled
Timezone Database Version 2006.14
Timezone Database internal
Warning: phpinfo() [function.phpinfo]: It is not safe to rely on the system's timezone settings. Please use the date.timezone setting, the TZ environment variable or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We had to select 'UTC' because your platform doesn't provide functionality for the guessing algorithm in /opt/sun/webserver7/https-www-live/docs/info.php on line 1
Default timezone UTC
Directive Local Value Master Value
date.default_latitude 31.7667 31.7667
date.default_longitude 35.2333 35.2333
date.sunrise_zenith 90.583333 90.583333
date.sunset_zenith 90.583333 90.583333
date.timezone no value no value
dom
DOM/XML enabled
DOM/XML API Version 20031129
libxml Version 2.6.27
HTML Support enabled
XPath Support enabled
XPointer Support enabled
Schema Support enabled
RelaxNG Support enabled
exif
EXIF Support enabled
EXIF Version 1.4 $Id: exif.c,v 1.173.2.5.2.4 2006/10/10 22:22:43 tony2001 Exp $
Supported EXIF Version 0220
Supported filetypes JPEG,TIFF
filter
Input Validation and Filtering enabled
Revision $Revision: 1.52.2.25 $
Directive Local Value Master Value
filter.default unsafe_raw unsafe_raw
filter.default_flags no value no value
ftp
FTP support enabled
hash
hash support enabled
Hashing Engines md4 md5 sha1 sha256 sha384 sha512 ripemd128 ripemd160 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru gost adler32 crc32 crc32b haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5
iconv
iconv support enabled
iconv implementation unknown
iconv library version unknown
Directive Local Value Master Value
iconv.input_encoding ISO-8859-1 ISO-8859-1
iconv.internal_encoding ISO-8859-1 ISO-8859-1
iconv.output_encoding ISO-8859-1 ISO-8859-1
json
json support enabled
json version 1.2.1
libxml
libXML support active
libXML Version 2.6.27
libXML streams enabled
mbstring
Multibyte Support enabled
Multibyte string engine libmbfl
Multibyte (japanese) regex support enabled
Multibyte regex (oniguruma) version 4.4.4
Multibyte regex (oniguruma) backtrack check On
mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1.
Directive Local Value Master Value
mbstring.detect_order no value no value
mbstring.encoding_translation Off Off
mbstring.func_overload 0 0
mbstring.http_input pass pass
mbstring.http_output pass pass
mbstring.internal_encoding ISO-8859-1 no value
mbstring.language neutral neutral
mbstring.script_encoding no value no value
mbstring.strict_detection Off Off
mbstring.substitute_character no value no value
mysql
MySQL Support enabled
Active Persistent Links 0
Active Links 0
Client API version 5.0.27
MYSQL_MODULE_TYPE external
MYSQL_SOCKET /tmp/mysql.sock
MYSQL_INCLUDE -I/h/iws-files/s/b/c/mysql/5.0.27/SunOS5.8_OPT.OBJ/include
MYSQL_LIBS -L/h/iws-files/s/b/c/mysql/5.0.27/SunOS5.8_OPT.OBJ/lib -lmysqlclient
Directive Local Value Master Value
mysql.allow_persistent On On
mysql.connect_timeout 60 60
mysql.default_host no value no value
mysql.default_password no value no value
mysql.default_port no value no value
mysql.default_socket no value no value
mysql.default_user no value no value
mysql.max_links Unlimited Unlimited
mysql.max_persistent Unlimited Unlimited
mysql.trace_mode Off Off
mysqli
MysqlI Support enabled
Client API library version 5.0.27
Client API header version 5.0.27
MYSQLI_SOCKET /tmp/mysql.sock
Directive Local Value Master Value
mysqli.default_host no value no value
mysqli.default_port 3306 3306
mysqli.default_pw no value no value
mysqli.default_socket no value no value
mysqli.default_user no value no value
mysqli.max_links Unlimited Unlimited
mysqli.reconnect Off Off
pcre
PCRE (Perl Compatible Regular Expressions) Support enabled
PCRE Library Version 6.7 04-Jul-2006
PDO
PDO support enabled
PDO drivers sqlite2, sqlite
pdo_sqlite
PDO Driver for SQLite 3.x enabled
PECL Module version (bundled) 1.0.1 $Id: pdo_sqlite.c,v 1.10.2.6 2006/01/01 12:50:12 sniper Exp $
SQLite Library 3.3.7
pgsql
PostgreSQL Support enabled
PostgreSQL(libpq) Version 8.1.5
Multibyte character support enabled
SSL support disabled
Active Persistent Links 0
Active Links 0
Directive Local Value Master Value
pgsql.allow_persistent On On
pgsql.auto_reset_persistent Off Off
pgsql.ignore_notice Off Off
pgsql.log_notice Off Off
pgsql.max_links Unlimited Unlimited
pgsql.max_persistent Unlimited Unlimited
posix
Revision $Revision: 1.70.2.3.2.6 $
Reflection
Reflection enabled
Version $Id: php_reflection.c,v 1.164.2.33.2.31 2006/10/18 16:35:15 johannes Exp $
session
Session Support enabled
Registered save handlers files user sqlite
Registered serializer handlers php php_binary wddx
Directive Local Value Master Value
session.auto_start Off Off
session.bug_compat_42 On On
session.bug_compat_warn On On
session.cache_expire 180 180
session.cache_limiter nocache nocache
session.cookie_domain no value no value
session.cookie_httponly Off Off
session.cookie_lifetime 0 0
session.cookie_path / /
session.cookie_secure Off Off
session.entropy_file no value no value
session.entropy_length 0 0
session.gc_divisor 100 100
session.gc_maxlifetime 1440 1440
session.gc_probability 1 1
session.hash_bits_per_character 4 4
session.hash_function 0 0
session.name PHPSESSID PHPSESSID
session.referer_check no value no value
session.save_handler files files
session.save_path no value no value
session.serialize_handler php php
session.use_cookies On On
session.use_only_cookies Off Off
session.use_trans_sid 0 0
SimpleXML
Simplexml support enabled
Revision $Revision: 1.151.2.22.2.15 $
Schema support enabled
soap
Soap Client enabled
Soap Server enabled
Directive Local Value Master Value
soap.wsdl_cache 1 1
soap.wsdl_cache_dir /tmp /tmp
soap.wsdl_cache_enabled 1 1
soap.wsdl_cache_limit 5 5
soap.wsdl_cache_ttl 86400 86400
sockets
Sockets Support enabled
SPL
SPL support enabled
Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject
Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilterIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RegexIterator, RuntimeException, SimpleXMLIterator, SplFileInfo, SplFileObject, SplObjectStorage, SplTempFileObject, UnderflowException, UnexpectedValueException
SQLite
SQLite support enabled
PECL Module version 2.0-dev $Id: sqlite.c,v 1.166.2.13.2.5 2006/10/20 21:28:31 tony2001 Exp $
SQLite Library 2.8.17
SQLite Encoding UTF-8
Directive Local Value Master Value
sqlite.assoc_case 0 0
standard
Regex Library Bundled library enabled
Dynamic Library Support enabled
Path to sendmail /usr/lib/sendmail -t -i
Directive Local Value Master Value
assert.active 1 1
assert.bail 0 0
assert.callback no value no value
assert.quiet_eval 0 0
assert.warning 1 1
auto_detect_line_endings 0 0
default_socket_timeout 60 60
safe_mode_allowed_env_vars PHP_ PHP_
safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH
url_rewriter.tags a=href,area=href,frame=src,form=,fieldset= a=href,area=href,frame=src,form=,fieldset=
user_agent no value no value
sysvmsg
sysvmsg support enabled
Revision $Revision: 1.20.2.3.2.1 $
tokenizer
Tokenizer Support enabled
wddx
WDDX Support enabled
WDDX Session Serializer enabled
xml
XML Support active
XML Namespace Support active
libxml2 Version 2.6.27
xmlreader
XMLReader enabled
xmlwriter
XMLWriter enabled
zlib
ZLib Support enabled
Stream Wrapper support compress.zlib://
Stream Filter support zlib.inflate, zlib.deflate
Compiled Version 1.2.3
Linked Version 1.2.3
Directive Local Value Master Value
zlib.output_compression Off Off
zlib.output_compression_level -1 -1
zlib.output_handler no value no value
Additional Modules
Module Name
sysvsem
sysvshm
Environment
Variable Value
PHPRC /opt/sun/webserver7/plugins/php
PHP_FCGI_CHILDREN 2
PHP_FCGI_MAX_REQUEST 200
FCGI_WEB_SERVER_ADDRS 127.0.0.1
LD_LIBRARY_PATH /opt/sun/webserver7/plugins/php
LD_LIBRARY_PATH_64 /opt/sun/webserver7/plugins/php/64
PHP Variables
Variable Value
_SERVER["PHPRC"] /opt/sun/webserver7/plugins/php
SERVER["PHPFCGI_CHILDREN"] 2
_SERVER["PHP_FCGI_MAX_REQUEST"] 200
_SERVER["FCGI_WEB_SERVER_ADDRS"] 127.0.0.1
_SERVER["LD_LIBRARY_PATH"] /opt/sun/webserver7/lib:/opt/sun/webserver7/jdk/jre/lib/sparc/server:/opt/sun/webserver7/jdk/jre/lib/sparc:/opt/sun/webserver7/jdk/jre/lib/sparc/native_threads::/opt/sun/webserver7/lib:
_SERVER["LD_LIBRARY_PATH_64"] /opt/sun/webserver7/plugins/php/64
_SERVER["FCGI_ROLE"] RESPONDER
_SERVER["HTTP_ACCEPT"] image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
_SERVER["HTTP_ACCEPT_LANGUAGE"] en-us
_SERVER["HTTP_ACCEPT_ENCODING"] gzip, deflate
_SERVER["HTTP_USER_AGENT"] Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
_SERVER["HTTP_HOST"] joomla
_SERVER["HTTP_CONNECTION"] Keep-Alive
_SERVER["PATH"] /opt/sun/webserver7/bin:/opt/sun/webserver7/lib:/bin:/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/bin:/opt/sfw/bin:/export/root
_SERVER["TZ"] Canada/Mountain
_SERVER["SERVER_SOFTWARE"] Sun-Java-System-Web-Server/7.0
_SERVER["SERVER_PORT"] 80
_SERVER["SERVER_NAME"] joomla
_SERVER["SERVER_URL"] http://joomla
_SERVER["REMOTE_HOST"] 172.20.200.11
_SERVER["REMOTE_ADDR"] 172.20.200.11
_SERVER["HTTPS"] OFF
_SERVER["GATEWAY_INTERFACE"] CGI/1.1
_SERVER["SERVER_PROTOCOL"] HTTP/1.1
_SERVER["REQUEST_METHOD"] GET
_SERVER["SCRIPT_NAME"] /info.php
_SERVER["PATH_TRANSLATED"] no value
_SERVER["SERVER_HOSTNAME"] www-live
_SERVER["SERVER_ADDR"] *
_SERVER["ORIG_PATH_TRANSLATED"] /opt/sun/webserver7/https-www-live/docs/info.php
_SERVER["ORIG_SCRIPT_NAME"] /info.php
_SERVER["SCRIPT_FILENAME"] /opt/sun/webserver7/https-www-live/docs/info.php
_SERVER["PATH_INFO"] no value
_SERVER["PHP_SELF"] /info.php
_SERVER["REQUEST_TIME"] 1177075610
_SERVER["argv"] Array
_SERVER["argc"] 0
_ENV["PHPRC"] /opt/sun/webserver7/plugins/php
_ENV["PHP_FCGI_CHILDREN"] 2
_ENV["PHP_FCGI_MAX_REQUEST"] 200
_ENV["FCGI_WEB_SERVER_ADDRS"] 127.0.0.1
_ENV["LD_LIBRARY_PATH"] /opt/sun/webserver7/lib:/opt/sun/webserver7/jdk/jre/lib/sparc/server:/opt/sun/webserver7/jdk/jre/lib/sparc:/opt/sun/webserver7/jdk/jre/lib/sparc/native_threads::/opt/sun/webserver7/lib:
_ENV["LD_LIBRARY_PATH_64"] /opt/sun/webserver7/plugins/php/64
_ENV["FCGI_ROLE"] RESPONDER
_ENV["HTTP_ACCEPT"] image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
_ENV["HTTP_ACCEPT_LANGUAGE"] en-us
_ENV["HTTP_ACCEPT_ENCODING"] gzip, deflate
_ENV["HTTP_USER_AGENT"] Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
_ENV["HTTP_HOST"] joomla
_ENV["HTTP_CONNECTION"] Keep-Alive
_ENV["PATH"] /opt/sun/webserver7/bin:/opt/sun/webserver7/lib:/bin:/usr/sbin:/usr/bin:/usr/dt/bin:/usr/openwin/bin:/bin:/opt/sfw/bin:/export/root
_ENV["TZ"] Canada/Mountain
_ENV["SERVER_SOFTWARE"] Sun-Java-System-Web-Server/7.0
_ENV["SERVER_PORT"] 80
_ENV["SERVER_NAME"] joomla
_ENV["SERVER_URL"] http://joomla
_ENV["REMOTE_HOST"] 172.20.200.11
_ENV["REMOTE_ADDR"] 172.20.200.11
_ENV["HTTPS"] OFF
_ENV["GATEWAY_INTERFACE"] CGI/1.1
_ENV["SERVER_PROTOCOL"] HTTP/1.1
_ENV["REQUEST_METHOD"] GET
_ENV["SCRIPT_NAME"] /info.php
_ENV["PATH_TRANSLATED"] no value
_ENV["SERVER_HOSTNAME"] www-live
_ENV["SERVER_ADDR"] *
_ENV["ORIG_PATH_TRANSLATED"] /opt/sun/webserver7/https-www-live/docs/info.php
_ENV["ORIG_SCRIPT_NAME"] /info.php
_ENV["SCRIPT_FILENAME"] /opt/sun/webserver7/https-www-live/docs/info.php
_ENV["PATH_INFO"] no value

Is there a way to parse php from a java program(a webserver for example)

Hellow folks,
I've recieved an assignement for school to develop a java webserver. The http and https webserver that I have written so far works as it should. Now to make it a little bit more impressive, I would have liked that my server is able to interpret php scripts or any other server-side language. I have know idea on how to accomplish this, I both understand java and php but I haven't got a clue on how to integrate the two. I do know that it is possible to run php as a cgi-php-interpreter, in that way I should make a batch, run it and recieve its output. Thats another problem since I have got no idea on how to recieve the outputted data from the batch.
If anyone could tell me how to start at one of the two different approaches I would be gratefull to you.
Thanks in advance
Benjamin Smekens

Thanks,
Tought about the invokation Runtime.exec(), I know how this works, allready used it, but have no idea on how to return values from a program that you bassicly run on your operating system instead of your own java application. Altough I guess I could use the Runtime.exec() to produce a html file and read that in from my webserver. Then again I didn't find any document which states that its even possible to generate the html, another thing are the passing variables e.g example.php?sfzefszf&&sfefsef. I know you can send those trough the command line php CLI, but the CLI cant generate any html if I'm right.
Anyway any more tips would be greatly appreciated, since I'm kind of stuck on this for one month and a half and read about every document that I could find. There is to read about the subject.

Ich habe ein Kontaktformular erstellt und per FTP zu meinen Provider (hosteurope.de) hochgeladen. Nach dem Upload erhalte ich folgende Nachricht: 1 Warnung Die PHP-Mail ist möglicherweise auf dem Webserver deaktiviert oder falsch konfiguriert. Übermittelt

Ich habe ein Kontaktformular erstellt und per FTP zu meinen Provider (hosteurope.de) hochgeladen. Nach dem Upload erhalte ich folgende Nachricht:
1 Warnung
Die PHP-Mail ist möglicherweise auf dem Webserver deaktiviert oder falsch konfiguriert. Übermittelte Formulare können möglicherweise keine E-Mails senden. Wenden Sie sich an den Hostingprovider oder Websiteadministrator, um Informationen zur richtigen PHP-Mail-Konfiguration zu erhalten.

Na da können wir nix für dich tun. Das must du schon im Backend deines Hostingpakets entsprechend alles konfigurieren. Schon klar, das einfach mal ein Formular hochladen nix weiter macht, als Fehlermeldungen zu erzeugen, wen nder Server es nicht verarbeitet...
Mylenium

Php 5 on webserver 7

Similar Messages

Maybe you are looking for