PHP no longer works

Hi,
I tried to upgrade and re-install PHP as I needed gettext which isn't used in the default configuration. So I downloaded the latest version of php and did the usual ./configure, make, make install. In the configuration part I used the following:
/configure --prefix=/usr/local/php5 \
--mandir=/usr/share/man \
--infodir=/usr/share/info \
--sysconfdir=/etc \
--with-zlib \
--with-zlib-dir=/usr \
--with-openssl \
--without-iconv \
--enable-exif \
--enable-ftp \
--enable-mbstring \
--enable-mbregex \
--enable-sockets \
--with-mysql=/usr/local/mysql \
--with-pdo-mysql=/usr/local/mysql \
--with-mysqli=/usr/local/mysql/bin/mysql_config \
--with-apxs2=/usr/local/apache2/bin/apxs \
--with-gettext
However, now when I try to start the web server it doesn't start. I did a configtest which gives out the following:
httpd: Syntax error on line 160 of /private/etc/apache2/httpd.conf: Cannot load /usr/libexec/apache2/libphp5.so into server: dlopen(/usr/libexec/apache2/libphp5.so, 10): no suitable image found. Did find:\n\t/usr/libexec/apache2/libphp5.so: mach-o, but wrong architecture
What has gone wrong? The web server starts when I remove the php5_module in the modules section.

I have also noticed that even though the web server is running, when I open one of my websites it just downloads a file with the name of the website. This is only with php. HTML works fine.
EDIT: I have got it to work again by copying the libphp5.so file from another mac to my server. However, now I don't have gettext support as this wasn't enabled when this version was compiled. How would I get gettext support? And if the only way is to recompile php how will I do it so it creates a compatible image?
Thanks

Similar Messages

PHP scripts with a $_SERVER['HTTP_REFERER'] directive inside, no longer work in v16.

I made a PHP script some time ago, before v16 came out and now that I have upgraded (good thing I did), notice that the $_SERVER['HTTP_REFERER'] directive no longer works. What my script does is, see if a user came in from a website (Facebook for example) and redirects them to the appropriate page. This is no longer the fact and I am not happy at all with this. How do I know FF 16 is at fault? Because, my script still works in IE7 and other web browsers. What have you done?????

A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the MozillaZine forum site in order to post at that forum.

Third party contact form widgets no longer working with upgrade - PHP errors

PHP seems to be even more screwed up with the latest update/upgrade to Muse. The previous upgrade started producing the following error message when I uploaded my site via FTP:
"1 Warning - Connection to PHP file failed. Unable to check if this web server supports PHP needed by Muse forms. Be sure the domain name entered in the FTP upload dialog is correct."
However, everything worked and in participating in some queries here, it seemed to be an oddity versus anything serious (things still worked but an error message popped up for no real discernible reason)
Since the latest update, however, widgets that I have from two different companies for the purpose of emailing me through the website, sending messages, etc, are no longer working and the following message is displayed upon hitting "submit"
" Form PHP script is missing from web server, or PHP is not configured correctly on your web hosting provider. Check if the form PHP script has been uploaded correctly, then contact your hosting provider about PHP configuration."
In checking with my web host provider, I was told
"the page appears to use the script form-u31652.php which does exist on the
server.
Unfortunately that error is not specific enough to point us in the right
direction. PHP is indeed working on the server. However, looking at the
apache web server error logs I can see that the contact form appears to be
looking for a file that does not exist.
To trouble shoot this issue you will want to work with Muse to determine
why the sites coding is looking for the file
/usr/home/NAME/public_html/WEBSITE.com/null."
Any ideas what this means and how to solve this would be great. I've tried re-uploading the entire website, figuring that maybe something wasn't being uploaded via "Modified Only" but it still is happening
Thanks!

That isn't what ended up fixing it, Sanjit. Thanks to this article PHP FAQ for Muse Synchronized Text and help from an online representative from Adobe, was able to troubleshoot with my web provider. Turns out the problem was that a while back Muse deleted the fcgi-bin directory (probably during the previous upgrade, as that is when the PHP errors started to surface with me and others). And it was never put back by Muse even during a clean/full reupload of the website. Had to have my web provider do it manually.

Dead keys in keyboard no longer working

I use "us-acentos" keymap and since 2014-09-24 upgrade the dead keys are no longer working: typing apostrophe followed by "e" should print "é" but instead it just prints the apostrophe.
This under X both in bash and in a graphical editor such as leafpad, geany, netbeans. In a non-X session the dead keys do not work either, an apostrophe followed by "e" will just display a space.
Would anyone have any suggestion as to why this happened and how to correct it? Thank you.
Output of locale-ctl status:
System locale: LANG=fr_CA.UTF-8;
VC Keymap: us-acentos;
X11 Layout: n/a.
Output of pacman.log:
[2014-09-24 16:59] [PACMAN] starting full system upgrade
[2014-09-24 17:03] [PACMAN] upgraded bash (4.3.024-1 -> 4.3.024-2)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-utils (20140325-2)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-mozilla (3.17-3)
[2014-09-24 17:03] [PACMAN] installed ca-certificates-cacert (20140824-1)
[2014-09-24 17:03] [PACMAN] upgraded ca-certificates (20140325-1 -> 20140325-2)
[2014-09-24 17:03] [PACMAN] upgraded efivar (0.10.8.g81d0146-1 -> 0.11-1)
[2014-09-24 17:03] [PACMAN] upgraded efibootmgr (0.7.0.16.g099e110-1 -> 0.8.0-1)
[2014-09-24 17:03] [PACMAN] upgraded rtmpdump (20131205-1 -> 20140918-2)
[2014-09-24 17:03] [PACMAN] upgraded libx264 (1:142.20140826-1 -> 1:142.20140826-2)
[2014-09-24 17:03] [PACMAN] upgraded ffmpeg (1:2.3.3-2 -> 1:2.4.1-1)
[2014-09-24 17:03] [PACMAN] upgraded nspr (4.10.6-1 -> 4.10.7-1)
[2014-09-24 17:03] [PACMAN] upgraded nss (3.16.3-1 -> 3.17-3)
[2014-09-24 17:03] [PACMAN] upgraded firefox (32.0.1-1 -> 32.0.2-1)
[2014-09-24 17:03] [PACMAN] upgraded firefox-i18n-fr (32.0.1-1 -> 32.0.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gegl (0.2.0-11 -> 0.2.0-12)
[2014-09-24 17:03] [PACMAN] upgraded gstreamer (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gst-plugins-base-libs (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded gst-plugins-base (1.4.1-1 -> 1.4.2-1)
[2014-09-24 17:03] [PACMAN] upgraded k3b (2.0.2-9 -> 2.0.2-10)
[2014-09-24 17:03] [PACMAN] upgraded libgpg-error (1.14-1 -> 1.16-1)
[2014-09-24 17:03] [PACMAN] upgraded libtirpc (0.2.4-1 -> 0.2.5-1)
[2014-09-24 17:03] [PACMAN] upgraded xine-lib (1.2.6-1 -> 1.2.6-2)
[2014-09-24 17:03] [PACMAN] upgraded opencv (2.4.9-4 -> 2.4.9-5)
[2014-09-24 17:03] [PACMAN] upgraded openresolv (3.5.7-1 -> 3.5.7-2)
[2014-09-24 17:03] [PACMAN] upgraded openscenegraph (3.2.1-1 -> 3.2.1-2)
[2014-09-24 17:03] [PACMAN] upgraded perl (5.20.0-5 -> 5.20.1-1)
[2014-09-24 17:03] [PACMAN] upgraded python2 (2.7.8-1 -> 2.7.8-2)
[2014-09-24 17:03] [PACMAN] upgraded x264 (1:142.20140826-1 -> 1:142.20140826-2)
[2014-09-24 17:03] [PACMAN] upgraded xorg-server-common (1.16.0-6 -> 1.16.1-1)
[2014-09-24 17:03] [PACMAN] upgraded xorg-server (1.16.0-6 -> 1.16.1-1)
[2014-09-24 17:03] [PACMAN] upgraded xz (5.0.6-1 -> 5.0.7-1)

Follow-up:
1) I could restore the keyboard in X with this command:
$ localectl set-x11-keymap us pc104 alt-intl
which creates /etc/X11/xorg.conf.d/00-keyboard.conf:
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us"
Option "XkbModel" "pc105"
Option "XkbVariant" "intl"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
another option that worked was to rename /etc/X11/xorg.conf.d/10-evdev.conf.pacsave to /etc/X11/xorg.conf.d/10-evdev.conf, which also contained the "XkbLayout" and "XkbVariant" lines under "InputClass" (the original file had been renamed to .pacsave in February 2013). See wiki:
https://wiki.archlinux.org/index.php/Ke … on_in_Xorg
The output from localectl status now reads:
System Locale: LANG=fr_CA.UTF-8
VC Keymap: us-acentos
X11 Layout: us
X11 Model: pc105
X11 Variant: intl
X11 Options: terminate:ctrl_alt_bksp
So it seems that the result of an earlier upgrade was to "unset" the keyboard for X (compare with output from localectl status in original post). Why?
2) the keyboard in console (out of X) is still not working. If I try to set it to "us-alt-intl" in /etc/vconsole.conf, it works as "us" should (no dead keys); it I use "us-acentos" some keys do not work. locale-ctl shows that "us-acentos" does exist (but not "us-alt-intl").
Mystery.

Menu bar no longer working with IE update

With the recent update in IE my main menu bar is no longer working, the "hover" function is not working and looks like the links are broken, but the links do work if you actually click on them. From my vista machine it is OK but from my XP machine it does not show as being a link. The submenu's however do still work, here is the code, the first line is from the main menu and doesn't work, the 2nd line is a submenu and does work.
Here is the site www.conundrumadventures.com
From the main menu this is the code for "Adventures":
<td id="002" class="link4" onclick="location.href='Teambuilding-Exercises-Adventures.php'"; onmouseover="changeC('002','link4h');" onmouseout="changeC('002','link4');" >Adventures</td>
 </tr>
 <tr>
From within the adventures page here is the code for the submenu for "Conundrum Metro":
 <td id="303" class="Sublink4" onclick="location.href='Outdoor-Team-Building.php'"; onmouseover="subchangeC('303','Sublink4h');" onmouseout="subchangeC('303','Sublink4');" >Conundrum Metro</td>
 </tr>
Any ideas how to fix the main menu bar?
Thanks
Lynn

I recommend doing away with your mouseover/mouseout links and convert to using Cascading Style Sheets.
Here is a link to CSS tutorials: http://www.adobe.com/devnet/dreamweaver/css.html
You don't say whether you are using Dreamweaver CS4 or an earlier version, but even if you are using that earlier version, you can type the code in yourself. Look especially at the tutorial chain "Designing with CSS", as there is a module that talks about a menu bar and how to make the links.
Best wishes,
Beth

Links no longer working in PDF with Pages 5

I have links in my Pages 5 document that work in Pages but no longer work in the PDF. They did when this was a Pages 09 file. In Pages 5 I can edit the, test them and everything is fine. Links are useless unless they can be part of the final deocument. Does anyone else have this issue and a work around? I am on Mavericks.

This is just one of over 90 features Apple has removed from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5 and rate/review it in the App Store, then get back to work.
Peter

Fast fix for iphone apps and music no longer working, no computer needed

Reply if this works for you, or if it doesn't...
Thanks to sbogaty who posted this fix!
This was buried in the long thread topic : iPhone applications no longer work
http://discussions.apple.com/message.jspa?messageID=7960722#7960722
Posted by: sbogaty
Posts: 1
From: NY
Registered: Aug 26, 2008
Re: iPhone applications no longer work
Posted: Aug 26, 2008 4:10 PM in response to: pmonahan
I am having the same problem as many of you. 3G iPhone. 2.0.2.
In the past 3 weeks I have had at least 5 if not 8-10 examples of loss of all iPod content and access to all apps. I know this happens on 2.0.2 and I know it happened at least a couple of times on 2.0.1. I am fairly certain that it never happened on 2.0.0.
This seems to happen EVERY time that the iPod crashes and reboots itself or when I force a hard reset. I haven't tried with a normal turn off/shut down in fear of having to go through this whole process again.
I have a solution that while not optimal works EVERY TIME!
1. Do a "reset all settings" from general settings. This will wipe out the set up of an exchange mail client, but not Yahoo, Gmail, or POP. While a pain this only takes a few minutes to reset up. It will not touch any app settings, high scores, etc. Additionally, all of your apps will need to reordered on the screen if you are like me and like certain ones to be on certain pages. Again, a pain, but this takes 5-10 minutes max for 4 pages worth of apps. Additionally, you will need to change any other personalized settings that you have set up (ring tones, favorites, brightness, etc.) At this point all iPod content will be back, but apps still won't work.
2. Go to the app store and download any app that you want. This will have you reinputing your username and password. Once this is compthe app is fully downloaded and installed you will have access to all of your apps again and your phone will work perfectly UNTIL THE NEXT TIME YOU HAVE TO DO THIS. Note, during this step, I have done a hard reset multiple times and gone through a overly long Apple logo time frame (and sometimes even hard reset during the Apple logo again) but this has yet to have any ill effect. Once the phone comes back up all apps works and all iPod content is there.
Finally, I have now stopped downloading or updating apps directly from the phone if at all. As this often causes or requires a hard reset.
Generally I get one to two days before having to do this again.
Please know I am not suggest this is all OK and I am barely tolerating this as it should just get fixed, but this is pretty easy and while monotonous on the 5th+ time, it isn't that time consuming and has worked every time.

Downgrading to iTunes 7.7.0 following the steps in the link below has worked for me for about 12 days now.
http://forums.macrumors.com/showpost.php?p=6055900&postcount=161
It boggles my mind that with an issue like this so big that Apple STILL doesn't have a permanent fix for it yet.

My iTunes got deleted off a (no longer working) computer. Is there a way I can transfer all content from my iPhone onto iTunes on a new computer? I want to update my phone, but do not want to lose any music off it when syncing it.

My iTunes got deleted off a (no longer working) computer. I have lost all music & data that was on this original itunes. Is there a way I can transfer all content from my iPhone (music & photos) onto iTunes on a new computer? I want to update my iphone (3GS), but do not want to lose any music off it when syncing it. Help please!!

By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are using a new computer, your phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under iTunes>Preferences(under the edit menu if using Windows)>Devices in itunes.
2. Make sure you have one contact & one event in the supported applications(Address Book & iCal or Outlook, Windows Address Book) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, iTunes running, DO NOT SYNC at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
You should be good to go.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?

Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Netboot no longer working after 10.6 upgrade

So I updated my 10.5.8 server to 10.6 recently, everything looks to be just dandy except that my netboot server no longer work.
I've used apple's trouble shooting guide and as well as bombich's, but still to no avail, I've checked the bootpd file, I even went as far as editing the nfs.conf file from macosxhints (link below)
http://hints.macworld.com/article.php?story=20100203124656707
below is a recent log:
Aug 30 16:06:41 120msod01 bootpd[1010]: server name 120msodxx.xxx.xxxx
Aug 30 16:06:41 120msod01 bootpd[1010]: interface en0: ip 10.5.0.57 mask 255.255.252.0
Aug 30 16:06:41 120msod01 bootpd[1010]: dhcp: re-reading lease list
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: re-reading configuration
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: shadow file size will be set to 48 megabytes
Aug 30 16:06:41 120msod01 bootpd[1010]: bsdpd: age time 00:15:00
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000012 seconds
Aug 30 16:06:41 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000028 seconds
Aug 30 16:09:16 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000009 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000002 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000014 seconds
Aug 30 16:11:08 120msod01 bootpd[1010]: service time 0.000007 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000019 seconds
Aug 30 16:11:39 120msod01 bootpd[1010]: service time 0.000008 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.3
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000777 seconds
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP DISCOVER [en0] 1,c4:2c:3:8:46:c6 NetBoot006 arch=i386 sysid=Macmini4,1
Aug 30 16:11:58 120msod01 bootpd[1010]: replyfile /private/tftpboot/NetBoot/NetBootSP0/SL_FullSuite.nbi/i386/booter
Aug 30 16:11:58 120msod01 bootpd[1010]: reply giaddr 10.5.12.2
Aug 30 16:11:58 120msod01 bootpd[1010]: BSDP OFFER sent [1,c4:2c:3:8:46:c6] pktsize 372
Aug 30 16:11:58 120msod01 bootpd[1010]: service time 0.000399 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000018 seconds
Aug 30 16:11:59 120msod01 bootpd[1010]: service time 0.000007 seconds
I wasn't getting this far (/tftpboot line) until I turned on the firewall to allow port 69 traffic but it seems that the service hangs when the client machine is supposed recevie the payload of the diskimage.
I don't know how a perfect netboot service goes to $h*t after a clean install with no configuration changed. I've verfied that nothing with our dhcp service nor dns has been changed and also verified that the server name has been added to the ip_helper.
Any help is greatly apperciated.

My experiences with netboot on snow leopard server and a few other observations: Point 1 - Never have wireless on whether it be client or server when trying to netboot client. Point 2 - Must use standard mtu setting -1500- on server under prefs. ethernet advanced, doesn't seem to matter on client -I use 7936 for 600TL Readynas on clients only-. Point 3 - It seems that if you ever use wireless on the server it messes it up for good -Took about 8 installs to learn this the hard way-. Point 4 - It seems when logging into workgroup manager with default popup of machine name.local and default user name messes server up if you have a domain name, example of how it should be is: machine name.domain name.com, org, etc. Then username would be diradmin, then password ***** so that settings will hold if you go in to change anything. Many days were spent by a friend and myself learning these few things pertaining to my machine and may help others with weird problems on snow leopard server. If anyone here knows why this is, please post, although my machine is working properly, I am curious. Thank You. By the way, I am using all the latest updates except itunes 10.

DVD optical drive no longer works with Windows under bootcamp or parallels

For some strange reason, the DVD optical drive- Optiarc 5680 on my 27" iMac, no longer works anymore with Windows under Parallels or Bootcamp. It used to work perfectly fine before, but now it just shows up with a yellow exclamation mark under Device Manager and Code 39 "Windows cannot load the device driver..."
The DVD drive continues to still work fine with OSX. But it won't work anymore under Windows via Parallels or bootcamp, despite trying to uninstall the optical device drivers, update, reinstall, etc. Anybody else experiencing this or have any ideas?

Finally found the solution for anybody else who runs into this problem. It was solved by doing a registry mod in Windows from this site:
http://aumha.org/win5/a/xpcd.php#problems
described in “My CD drives have vanished (from Explorer, Device Manager, etc.)”
After applying the registry changes the DVD optical drive worked instantly again with Windows....sigh...guess I can't blame the Mac on this one.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Our menu bar no longer works correctly. The flyouts only show the first menu option and none of the drop-down menu options.

In previous versions of Mozilla we had drop-down menus that contained flyouts that offered more drop-down options. This no longer works in Mozilla 4. If you look at our website in IE7, 8 or 9 and Mozilla 4.0.2 they now work differently. (www.saskschoolboards.ca) Eg. Under About Us / Committees there should be three more dropdowns on a flyout - Committee List; MEPP Report and Semi-Annual Report form. Mozilla 4.0 only shows Committee List and no other drops downs. All of our flyouts are showing only the first selection and nothing else.
Other affected menus dropdowns are:
Board Dev / Trustee Development (there should be 4 dropdowns - not just one)
Communications has Surveys and Elections
Why is Mozilla not showing our menus correctly anymore?
Andrea Ashton - [email protected]

I see this error in the Tools > Error Console: 
 
<blockquote>Error: D.getStyle is not a function
Source File: http://www.saskschoolboards.ca/js/mootools.js
Line: 279
</blockquote>
It looks that the mootools script is no longer compatible with Firefox 4. 
Google Chrome behaves the same and also doesn't open the sub-menus properly and keep the first entry on display once it is open.
Did you check if there is an update for that script?
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

Browser cache ignore no longer works after windows update

Just thought I'd share that after the windows update I did
this week, the browser cache blocking trick described in many
places where you put ?r=<randomnumber> at the end of a URL no
longer works. Not exactly sure what happened, but it now causes a
URL not found error, at least for me when I'm loading local files
off my disk.
This thread talks about the cache blocking trick:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=665&threadid =1357763&highlight_key=y&keyword1=cache

Here's a technique I use. In a php file:
header("Expires: Mon, 20 Jul 1997 05:00:00 GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", FALSE);
header("Pragma: no-cache");
This must be wrapped in php tags.

Discover pro no longer works

Discover pro app no longer works with 4.1 on new ipod touch. It works on 2nd gen ipod touch with 3.1 Have paid for this app and disappointed that it no longer works with my new ipod touch.

You can try restore or contact the developers: http://www.mappn.com/supp.php
But It looks like they removed the apple from the Apple Store

PHP no longer works

Similar Messages

Maybe you are looking for