PI 7.11 sp6 Integration Builder - folder view error

Experts,
We recently installed SAP NW PI 7.11 (ehp1) up to sp6.  This is a new install.  We did all the wizards, etc and things are basically ok.
we execute SXMB_IFR, then go to "integration builder" link and login.
If I change the view from "object view" (icon of 2 people) to "folder view" (icon of folder), we get the following error:
class com.sap.guid.GUID:library:core_lib at com.sap.engine.boot.loader.ResourceMultiParentClassLoader at 2353f67e at alive incompatible with interface com.sap.aii.ib.bom.gen.XiReference:sap.com/com.sap.xi.directory at com.sap.engine.boot.loader.ResourceMultiParentClassLoader at 79c008cf @ alive
I found this note, but it does not quite describe my problem:
Note 1525457 - Previous version of Directory API and Value Mappings
I searched all through SDN and OSS, nothing yet.  I'm going to put in a message but I was wondering if anyone out there has seen this?
Thanks!
NICK

experts,
FYI, ready my problem details but I wanted to add one thing.  Apparently were were at sp5 for a brief time and our developer did create some object while at that level.  He reported the issue since we moved to SP6
--NICK

Similar Messages

  • Integration Builder Start up Error

    Hi All,
    We had our XI 3.0 upgraded to PI7.1 EHP1
    When we start our Integration Builder, it ends in the following error. Could anyone adivse on this?
    Message
    Internal error: Unable to start component DIRECTORY_SERVER. Specified startup code entry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
    Stacktrace
    Thrown:
    com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified startup code entry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
         at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
         at JEE_jsp_start_index_484086150_1256229746000_1256235907203._jspService(JEE_jsp_start_index_484086150_1256229746000_1256235907203.java:121)
         at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:146)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
         at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:486)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
         at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
         at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
         at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
         at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
         at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
         at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
         at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    Initial Startup Exception
    Internal error: Unable to start component DIRECTORY_SERVER. Specified startup code entry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
    Thrown:
    com.sap.aii.ib.core.applcomp.StartupException: Internal error: Unable to start component DIRECTORY_SERVER. Specified startup code entry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
         at com.sap.aii.ib.core.applcomp.StartupException.newEntryClassNotFound(StartupException.java:78)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:101)
         at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:438)
         at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:203)
         at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.startup(CacheMonitorServlet.java:104)
         at com.sap.aii.ibdir.server.cache.monitoring.CacheMonitorServlet.init(CacheMonitorServlet.java:45)
         at javax.servlet.GenericServlet.init(GenericServlet.java:241)
         at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAs(Subject.java:396)
         at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:336)
         at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
         at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:169)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:266)

    HI Dixie,
    I am having the same error when trying to start the IS com.sap.aii.ibdir.server.applcomp.StartupCodeEntry.  Have you found the solution to this issue?  If yes, can you give me some info on how i can resolve this error?  I can get SLD and RWB to start but for Integration Rep and Integration Dir i am getting this error
    Internal error: Unable to start component DIRECTORY_SERVER. Specified startup code entry class "com.sap.aii.ibdir.server.applcomp.StartupCodeEntry" does not exist
    Please advise.
    thanks in advance

  • How to Launch an Integration Builder under two different java versions

    How to Launch an Integration Builder under two different java versions     1
    1. Situation     2
    2. How To Do     2
    2.1 jre preparation     2
    2.2 Put them into the system     2
    2.3 Execute a Java Web Start under jre 1.4.x version     3
    2.4 Change Java Runtime Versions     3
    2.5 Launch an Integration Builder     6
    1. Situation
    OS: windows 2000 pro – English
    Java version: jdk 1.5.x was already installed. (It’s not permitted to change.)
    I don’t have any authorization to install any software on the PC.
    But I need to use an Integration Builder.
    I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
    2. How To Do
    At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
    2.1 jre preparation
    I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
    I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
    2.2 Put them into the system
    I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
    Finally, I could list up all of javaws.exe under this system.
    c:\j2re1.4.2_10\javaws\javaws.exe
    c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
    c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
    c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
    2.3 Execute a Java Web Start under jre 1.4.x version
    I executed c:\j2re1.4.2_10\javaws\javaws.exe .
    2.4 Change Java Runtime Versions
    Go to File-> Preferences -> Java
    As you can see, it indicates 1.5 version.
    Click [FIND] button.
    Click [NEXT] button.
    Click the j2re1.4.2_10 folder.
    Click [NEXT] button.
    A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
    Click [NEXT] button.
    Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
    Click [OK] button.
    Well, in the General tab, I selected None for Proxies.
    2.5 Launch an Integration Builder
    In the Location field, I typed the URL of an Integration Builder jnlp.
    http://<hostname>:50000/rep/start/repository.jnlp
    SAP Integration Builder comes up inside Applications area.
    Select it and click [Start] button.
    If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
    [PDF file location] with screenshots
    http://SDN.mobilian.org/SDN/How2LaunchIB.rar
    ===================Advertisement==========================
    How do you search SDN?
    What about [<b>SDN Search Widget</b>]?
    SDN Search Widget
    =========================================================

    I am not getting anywhere with deploying my application or
    applet.
    I have set up my bc4j project. It contains all my VO info,
    links, application module. (proj a)
    I then have another project with DbInfo in it(has all my rowset
    info), Multiple Frames, and my Applet.java file.
    Actually I have an Applet.java file and a Application.java file
    because I was seeing if both/either worked. Anyway they seem the
    same, except for that extra window that comes up when you run the
    applet.
    I follow the steps in the oracle directions (from earlier post).
    And all seems ok. But at ---->
    [*] Select the subdirectory under myhtml where your applet's HTML
    file
    is located, and enter the directory path of the 'staging'
    directory you
    created in step 3 above, if different from the default.</li>
    [*]Select the HTML files that JDeveloper created to run your
    applet.</li>
    [*]Select all of the Java source files in your project that make
    up the
    applet.</li>
    I have no HTML file associated with my applet, at least that I
    know of.
    So do I need to create one, or should it of been done
    automatically.
    Also, I trying to figure out what will be the best way to deploy
    my project. Applet or stand alone application is what my first
    choices have been so far. I have read that there is some issues
    with applets being served from a different server than the
    database. So a stand alone application was my front runner, but
    I haven't gotten either way to work yet.

  • Create folder view with files and tasks

    Good day to you,
    we want to support our software development procces with Vibe. What we are doing is, we make changes to the source code and protocol corresponding things in certain files.
    We think in so called "releases" and every release consists of tasks and a list of changes. This list is held in an excel file, so I would like to create a folder view, which consists of tasks and files.
    So far I could create a custom folder view with attachments at the top and a task list at the bottom, based on the task family.
    The problem is, the attachment view as a standard folder view does not allow colleborative editing of attached files. You can only view and download attached files, but not open them via Office addin. Therefore you can not lock or version files, which is mandatory for collaborative work.
    I would like to mix the file folder view with it's possibilities with a task folder view.
    Any ideas?
    Warm regards
    bitschnau

    There's no out of the box way to achieve what you're looking for.
    Two solutions:
    1. Your users would need to open the entry first and then click on the "edit this file" link.
    2. You could code your own folder view or landing page element and build what you need.
    HTH
    Cheers
    Erik
    PS: Feel free to contact me offlist if you need professional support.

  • Integration Builder XML Problem

    Hi all,
    after upgrading our XI installation to SP 11 I get the following error: I can't work with XML data anymore.
    For example if i try to import external message definition from a WSDL file with the Integration Builder (IB), the IB loses it's connection to the server and ask me for a password in order to reconnect to the server. The import of the external message definitions does not work.
    Another example is when I create Data Types, Message Types or Message Interfaces manually an try to view the XSD representation of it I only get "CANT_GET_XSD_MSG".
    Has anyone here an idea how to solve this?
    Thanks
    Christian
    Message was edited by: D038822

    Hi,
    Apply Xi30-SP11-Patch 3 files for SAPXItools. Check for more information below. your problme is fixed in Patch1.
    SAP Software Distribution Area
    More information about
      patch name          SAPXITOOL11P
      patch level         3
      patch   date           patchtext
         0   2005/03/07     SP11 contains all known fixes for SP10, note 811017
         1   2005/03/09     Import of external definitions, note 825655
         2   2005/03/11     Export of documentation objects fails, note 826583
         3   2005/04/04     Scenario Configurator: Incomplete generated channel, note 832406
    Thanks
    Prasad

  • Best Practice Guide for object management in Integration Builder

    Hi All,
    I'm looking for a best practice guideline, or a strategy pattern for the management and maintainable of Integration Builder objects.
    Is their such a document, or has someone experience with a huge amount of objects ( 200-300 interfaces) ?
    I was thinking about a folder to sub-folder strategy, but don't feel comfortable with that solution:
    -->Root folders ( business relationship e.g. "Customer", "Supplier", "Bank" etc.)
    >Sub folders ( e.g. "AB Customer", "ZX Supplier", etc)
    Regards
    Oleg

    Hi ,
      I am in the safe confusion one year back, we developed 200 interfaces in XI3.0 ,every interfaces has minimum 10 mapping programs,its difficult manage the alla scenarios ,
    That what i created Software components for as per region like SA(South America), North Americ , Europe, Asia Pacific,we developed interafces for above regions,that why  created software compinehts like that.
    Then i created name spaces inside outbound and inboud to easy to diffentiate ..like that i had done.
    If you are with PI7.1 betetr to go for Folders,create folders and move objects.
    my answer not satisfies you..pls dont mind..:)
    Reagards,
    Raj

  • NW2004s XI Can not start Transaction: Integration Builder

    NW2004s ABAP + Java
    In both 000 and 001 client, on trying to launch "Integration Builder" using transaction "sxmb_ifr". The message says "Starting browser..." and opens the local sap folder on my PC. It does not launch the Web Browser (Internet Explorer) as it should.
    Anybody else facing the same problem ?

    Do you have the values in the exchange profile setup correctly...
    This should have been part of the post installation activities to be done...
    Check the exchange profile parameters in url
    http://<webas>:5<sysnr>00/exchangeProfile
    verify the entries under "Connections"
    Thanks,
    Renjith

  • Error Starting XI Integration Builder

    Hi gurus,
    Could anybody please help me solve the problem I'm encountering when I start Integration Builder (SXMB_IFR) in our XI?  Below is the error:
    Service cannot be reached
    What has happened?
    URL http://urphxid:8000/rep/start/index.jsp call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system XID with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:URPHXID_XID_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    I checked  /usr/sap/<instance>/DVEBMGS00/work/std_server0.out and I found the below error:
    ^MSAP J2EE Engine Version 6.40   PatchLevel 104329.313 is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: A file or
    directory in the path name does not exist. jar:file:/usr/java14_64/jre/lib/ext/ibmjceprovider.jar
    I checked ibmjceprovider.jar file if exists and its permission and it's ok. I tried also to search forums with the same problem but I can't find one.
    Hope you can help me with this problem. Thanks in advance.
    Best Regards,
    Fidel

    Hi gurus,
    Could it be the cause of the problem is the error message inside  /usr/sap/<instance>/DVEBMGS00/work/std_server0.out?  What could be the cause of this error? I've checked the file and it is exists inside the folder.  The permission is also ok.
    ^MSAP J2EE Engine Version 6.40 PatchLevel 104329.313 is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: A file or
    directory in the path name does not exist. jar:file:/usr/java14_64/jre/lib/ext/ibmjceprovider.jar
    I run jcmon and found that the dispatcher was stopped.
    |Idx|Name                |PID     |State               |Error|Restart|
    |-||||-|-----|
    |  0|dispatcher         |       0|Stopped              |    4|no     |
    |  1|server0            |  667704|Running              |    0|yes    |
    |  2|SDM                |  495626|Running              |    0|yes    |
    Does the dispatcher will open/use the port 50000 if it is successfully started?  The following is the content of std_dispatcher.out with the same error found on std_server0.out.
    MSAP J2EE Engine Version 6.40   PatchLevel 104329.313 is starting...
    Error occurred while preloading classes of security providers from jre/lib/ext folder: java.util.zip.ZipException: A file or
    directory in the path name does not exist. jar:file:/usr/java14_64/jre/lib/ext/ibmjceprovider.jar
    Loading: LogManager ... 1417 ms.
    Loading: PoolManager ... 3 ms.
    Loading: ThreadManager ... 1107 ms.
    Loading: IpVerificationManager ... 20 ms.
    Loading: ConnectionsManipulator ... 38 ms.
    Loading: ClassLoaderManager ... 30 ms.
    Loading: ClusterManager ... 284 ms.
    Loading: PortsManager ... 18 ms.
    Loading: LockingManager ... 117 ms.
    Loading: ConfigurationManager ... 5312 ms.
    Loading: LicensingManager ... 38 ms.
    Loading: ServiceManager ...

  • Unable to open folder view after loging in ID

    Hi , I am using SAP PI 1.7, after loging in to Integration Directory I am trying to change my veiw to folder view , but receiving the below error, ay idea how to resolve this??
    Already tried below things:
    Exiting the session and openign a new one. -- Result: same error pops up.
    Refresh the cache. --Result: same error pops up.
    Error:
    Navigation Problem:
    class com.sap.guid.GUID:library:core_lib com.sap.engine.boot.loader.ResourceMultiParentClassLoader 7745c859 alive incompatible with interface com.sap.aii.ib.bom.gen.XiReference:sap.com/com.sap.xi.directory com.sap.engine.boot.loader.ResourceMultiParentClassLoader 4ac747d3 alive

    You can check the note #1556050 ' Not able to use Folder view in IB-Configuration', this describes this issue and the solution.

  • Link to A folder View in a PDF Portfolio - feature no longer working - please advise

    Hi, I am no longer able to link to a Folder View of a PDF Portfolio:
    Within a PDF portfolio i need to link from a PDF to a folder view in the Portfolio. I am using Link Action - Go to Page View.
    This used to work for me - very important feature that no longer works. Please advise a workaround.
    Steps:
    1. Start a PDF Portfolio that contains files and folders
    2. Open a PDF in the Portfolio
    3. in the opened PDF click Add or Edit Link
    4. Define a link area and set it to Go To A Page Vies
    5. In the past i have been able to target a Folder View in the Portfolio - ie. direct a user not to a file, but instead to a folder view that contains relevant files. I would do this by setting the Target Page View to my desired folder view
    6. This used to work in bringing a user to the folder view i specify. Now it does nothing. If i go back to the PDF and EDIT the Link i see this. File: Parent Document Page 1. This in fact does nothing.
    Please advise, am i doing this wrong, it used to work. I have tried several workarounds, with no luck.
    thanks!
    Alejandro Collados-Nunez
    Graphic Designer | Art Director
    | e: [email protected]
    | w: www.1lb.ca

    There's an extension or two, or a combination of extensions which seem to be causing that in Firefox 6.0.2. One that has been mentioned is TabMix Plus.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    You need to figure out what is causing it, and disable that extension/s until they are fixed by their developer.

  • Unable to Launch Integration Builder: Java Web Start problem

    Hi,
    I am unable to launch the integration builder. I am using JDK 1.4.2_05. The java Web Start gives the following error:
    Unsigned application requesting unrestricted access to system
    Unsigned resource: http://<XIHostName>:50000/rep/repository/aii_util_rb.jar
    I have tried deleting the Java web start cache, and even reinstalling the JDK.
    Can someone suggest a workaround this problem ?
    thanks,
    Manish

    The Java Web Start cannot accept unsigned jars. If the jars are signed, it will ask in a dialog box if it should allow unrestricted access to this jar.
    In my case, I upgraded XI SP0 to SP4, which included updating the Adapter Core, Adapter Framework, and the XI TOOLS to SP4.
    On launching the Web start, it seemed that the jars were not getting signed. JWS cannot allow unsigned jars to the client.
    These jars are maintained in:
    \usr\sap\<SID>\SYS\global\xi\directory_server\javaws\directory
    I am having problems with my XI upgrade to SP4, and it is probably not signing the jars.
    Do you know why this may be happening ...
    thanks,
    Manish

  • URGENT | Need HELP to build programmatic view criteria

    Hi
    I need to build programatic view criteria like below,
    ((JobId = "SH_CLERK" AND Salary > 2500) OR ( Salary > 2500))
    AND (DepartmentId =100)
    Kindly help how can we achieve this,
    The ViewCriteriaItem objects like below, how to link them to achieve like above statement.
    ViewObjectImpl empVOImpl = getEmployeesView1();
    ViewCriteria vc = empVOImpl.createViewCriteria();
    ViewCriteriaRow vcr = vc.createViewCriteriaRow();
    //criteria for employee id
    ViewCriteriaItem vci1 = vcr.ensureCriteriaItem("JobId");
    vci1.setValue("SH_CLERK");
    //criteria for showing employees whose salary are more than 10000
    ViewCriteriaItem vci2 = vcr.ensureCriteriaItem("Salary");
    vci2.setOperator(">");
    vci2.setValue(new Number(2500));
    //criteria for department
    ViewCriteriaItem vci3 = vcr.ensureCriteriaItem("DepartmentId");
    vci3.setOperator("=");
    vci3.setValue(new Number(100));
    vc.addElement(vcr);
    empVOImpl.applyViewCriteria(vc);
    - Rajesha
    Edited by: user12820425 on May 15, 2013 10:18 AM

    Hi Rajesha,
    You can follow below steps.
    1)Create VOImpl for VO on which you have query based.
    2)Remove Column(eg.JobId) from standard Default ViewCriteria
    3)In VOImpl create method to Create View custom Criteria, Add element
    public ViewCriteria  addCustomVC(){
                ViewCriteria vc = null;
                vc = this.createViewCriteria();
                vc.setName("customVC");
            ViewCriteriaRow vcRow = vc.createViewCriteriaRow();
            vcRow.setConjunction(ViewCriteriaRow.VC_CONJ_AND);
            if(getJobId() != null){ 
                vcRow.setAttribute("JobId", "' job_id = "+getJobId()+"'"); 
            }else {
                vcRow.setAttribute("JobId",null);
            vc.addElement(vcRow);
    return vc;
    }4)Override standard method public String getCriteriaItemClause to exclude above columns
        @Override
        public String getCriteriaItemClause(ViewCriteriaItem viewCriteriaItem) {
            //JobId
            if( "JobId".equals(viewCriteriaItem.getName()) ) {
                return (String) viewCriteriaItem.getValue();   
            }else{
                return super.getCriteriaItemClause(viewCriteriaItem);
        }5)Override public void executeQuery() method to add custom view criteria
    @Override
        public void executeQuery()
                applyViewCriteria(addCustomVC(), true);
                super.executeQuery();
                removeApplyViewCriteriaName("customVC");
        }Thanks,
    Jit

  • Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

    Dear Friends / Experts,
    I had spend many days and explored all Weblog  and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
    As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
    Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
    In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
    Our Environment - PI 7.0 SP 16
    Created a new role in the Integration Builder Design
    u2013Add Object Types of any Software Component and Namespace
    - Enable usage of Integration Builder roles in Exchange Profile
    Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
    Assign users to the newly created Integration Builder roles
    u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
    u2013Assign users to these roles
    u2013Assign the Integration Builder roles to the above groups in Web AS Java
    u2013Assign unrestricted roles to Super Users
    Please help - How to validate whether Data Dependent Authorizations are Activated?
    I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
    Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
    In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
    In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
    The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
    I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
    Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
    Thanks a lot
    Satish

    Hello,
    so to give you status of our issue.
    We were able to export missing business component .
    But we also exported some interfaces after that and we had some return code 8, due  to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
    So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
    Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
    Also recommending to read that, which is pretty good.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
    Thanks all,
    S.N

  • Albums and tags in folder view PSE9

    I have just converted from v6 to v9. In v9. I have a pictures folder with dated subfolders. In v9, using albums to search or tags, I cannot search the whole pictures folder ie all the subfolders. It will only search within the folder I am viewing. The means I have effectively lost the ability to search. It worked in v6 ok. I can search using albums/tags only when I am in thumbnail view. I have checked all the varioous options and views and cannot work out if something is wrong or a different functionality. In v6 when in folder view I click on "My pictures" all the photes can be viewed and I can scroll through all the sub folders using the slider down the rightr side. In v9 when I do this nothing is displayed and I have to click on a specific folder to view photos but only those in the subfolder. Any ideas how to solve this issue?
    Neil

    I agree.  This upgrade has lost important features and is extremely slow.  If I had only known, I defintely would not have upgraded.
    Hopefully, the folks from Adobe are following this and will issue a patch to make the organizer usable.  I'm about to just switch to Picasa for the organizer features.
    ...Rich

  • Duplicate folders NAME~1 appear in PSE9 Elements 9 Orgainser folder view

    I am running Photoshop Elements 9 (PSE9) in windows7 and I am having a problem of apparently empty duplicate folders in Organiser's folder view (thumbnails on the right, Windows Explorer type folder list on the left).
    A new apparently empty folder structure has appeared on in the folder view, identical to my main set of photo folders but containing no thumbnails and with a truncated folder name, eg DigitalPhotos becomes Digita~1 and FamilyandFriends becomes Family~1.  If I delete any of the apparently empty subfolders in the duplicate folders, it deletes all the real jpgs from the hard drive and they show up as a missing file when I click on the proper thumbnail in the proper folder. It would appear to me that the catalog is referring to the same underlying file at two points for my whole catalog.
    As the folders are apparently empty there is no ability to use the delete file option and uncheck delete file to delete only from the catalog
    I have tried..
    - catalog optimise
    - catalog repair anyway (no faults found)
    - catalog repair rebuild visual similarity index
    - deleting the thumbnail file from ProgramData\Adobe\etc. then rebuilding all thumbnails (took hours) - I thought this had solved the problem when I checked very late last night but it wasb back when I turned on the computer this morning.  I am now questioning whether in fact this solved the problem or if this was my imagination/ lack of sleep
    They clearly shouldn't be there and I am concerned that double-links to the same underlying file will cause me corruption-related trouble.
    Any ideas?  I am really concerned the whole thing is going to crash on me and erase endless hours of work.
    Thanks
    Kimberley

    Try these troubleshooting notes or download the ASA to analyze your error report.
    http://kb2.adobe.com/cps/858/cpsid_85843.html#main_Error__Below_mentioned_applications_hav e_failed_to_install__Shared_technologies_

Maybe you are looking for