PI 7.31 (single stack) posting RFC gives this error: RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ECCHostXYZ)

I'm trying to determine if I am dealing with an RFC connection issue or just an error resulting from the RFC itself.
The error says "Processing of change number...cancelled (raised by...ECCHostXYZ)".
I thought this was a problem with my RFC config because it is labeled as "RFC_ERROR_SYSTEM_FAILURE".
However, when I google that specific message, it appears to be an error specific to change order creation.
Here’s my google search: http://goo.gl/ZhKsm3
Here is the error again:
RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ED1|ecc-host-xyz)
When I check ST22, I see no RFC errors.

Hi Jody,
No st22 exception is needed to be throwed in order to raise a controlled exception in the RFC.
You would need to check the RFC in the ECC system with the data that you are sending from PI, if the data is the same, you would need to check PI user RFC roles with the ECC roles user that you used to check the data integrity in the ECC test.
To avoid this error you can do a Z RFC to wrap the standard RFC and to control the exceptions errors with a BAPIRET2 strucutre to return to PI.
Hope this helps.
Regards.

Similar Messages

Reptcha Error , I was trying to validate a post and give this error every time after submiting every correct input

Line 18: }
Line 19: if(ReCaptcha.Validate() == false)
Line 20: {
Line 21: ModelState.AddError("Captcha", "Incorrect CAPTCHA response");
Source File: c:\Users\lapx\Documents\My Web Sites\EmptySite2\blog_single.cshtml Line:
19
Stack Trace:
[WebException: The operation has timed out]
System.Net.HttpWebRequest.GetResponse() +6594148
Microsoft.Web.Helpers.ReCaptcha.ExecuteValidateRequest(String formData) +188
Microsoft.Web.Helpers.ReCaptcha.Validate(HttpContextBase context, String privateKey, VirtualPathUtilityBase virtualPathUtility) +131
Microsoft.Web.Helpers.ReCaptcha.Validate(String privateKey) +99
ASP._Page_blog_single_cshtml.Execute() in c:\Users\lapx\Documents\My Web Sites\EmptySite2\blog_single.cshtml:19
System.Web.WebPages.WebPageBase.ExecutePageHierarchy() +197
System.Web.WebPages.WebPage.ExecutePageHierarchy(IEnumerable`1 executors) +68
System.Web.WebPages.WebPage.ExecutePageHierarchy() +151
System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) +76
System.Web.WebPages.WebPageHttpHandler.ProcessRequestInternal(HttpContextBase httpContext) +114

Please post questions related to ASP.NET in the ASP.NET forums (http://forums.asp.net ).

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

When I open SQL Plus then give this error

Hi Master,
Sir i install oracle 8i and run but next day i open my SQL Plus then give this error
ORA-01034 : oracle not available
ORA-27101 : Shared memory realm does not exist
please give me idea
thanking you
Amir

I presume you are using Windows, so in Control Panel -> Services, start the Oracle service, and also start the instance, if not started.

Oracle Load testing- Open script at the end of recording gives this error

I am recording a script for R12 in Open scirpt , but at the end of finish record Open script Load testing gives this error"Failed to correlate script has encountered a problem"
Steps I followed. Open Open script-New Script. Select Load testing Protocol(Automation) - Select Oracle EBS/Forms- Create a script. Now start recording. I have EBS R12 instance and the test I am doing is just login / open a form . After that I click Stop recording. Open script pops up a Window "Exception occured while correlating script:oracle.oats.scripting.transforms.TransformException:transfrom rule threw exception in TransformStep:oats.otas.scripting.modules.formsLT.correlationformsHttpVarSubstitution.Refer to the Error Log for Details". The tool is installed on Windiws 7 64 bit and using IE8 as a browser.
Any help?

Hi
Thanks JB/Glen
My Answers
Stupid, but have you tried to create a new script?
ANS-Yes JB . Always try with New one only not using the same. Also before I record first I try the same steps in browser to make sure it work/oepns all.The do the same via recording)
Is that the only script that doesn't work?
ANS-Every script that I record has this issue on this Windows - x 64 Laptop.
Have you tried another one? Just a simple web one?
ANS- Open script functional recording works fine.
Have you ran the Diagnose Tool (Help Menu)?
ANS- Yes- All came out Green
Have you put a specific name for the script? Special characters?
ANS-No my script name is Test1, Test2 etc
Restart OpenScript?
ANS- Yes Tried several times. Also I completely uninstalled/removed registry/folders, re-installed also.
But I have another Windows XP machine where I installed now that works fine. Only issue now on this Laptop - Why /where is the issue on this Laptop?
Open the error view which will show in the lower pane. You may find more details.
ANS- More details shows only "Exception occurred while correlating script." a one liner
When you manually run the "Correlate Script" option as JB has mentioned, first un-check all but one correlation rule. This is an additional choice in "Correlate Script" menu. If no error, "Revert to recorded" again, and then "Correlate Script" again though this time un-check all but two correlation rules. Continue this effort until you narrow down the correlation rule which throws the error.
ANS- This is a simple out of the install and I ccan see only two Rules. HTTPS Libraries and Oracle Load Form Libraries. If we leave Oracle Load form libraries checked and correlate that is where it is failing. I believe we need that Library correct?
Thanks

When I open Firefox it gives this error, ReferenceError: mtRpt is not defined, and then open normally. How do I fix it?

When I open Firefox it gives this error, ReferenceError: mtRpt is not defined, and then open normally. How do I fix it?

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

My apple RIP gives this error message" the application ppRIPe has unexpectedly quit"

MY APPLE RIP GIVES THIS ERROR MESSAGE" the application ppRIPe has unexpectedly quit"

Thanks.
I should have mentioned that I have already done the Resolving Permissions as outline on Apple Support pages, but, I went ahead and did the complete sequence as shown on Dr. Smokes.
I decided to stop beating a dead horse and did an Erase and Install of 10.2 again since I did not have anything on there yet. So far, everything is working perfectly. I am doing the Software Updates called for one by one to see if any of those caused the problem.
The only thing I did other than doing all of the updates after the install was to install OS 9.2 for my Classic Environment software and I also installed an HP PSC 1315v All-In-One scanner/printer. I cannot imagine that would have done anything.
I did have some strange issues with Where in the USA is Carmen Sandiego and The Star Fleet Technical manual so I may stay away from them unless I start in OS 9 if none of the other updates cause any issues.
Thanks. BTW, How should I rate your answer? I know that it did not solve my problem, but, it is likely that something else I did whacked something.
I'll update when I know more.

PI 7.31 (single stack) posting to RFC configuration gives this error: om.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system extern ...

Getting cryptic error while trying to post to a custom RFC from PI 7.31 single stack.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: String index out of range: 0 (raised by system <extern>|pidevhost)
Does anyone recognize this error and/or know of detailed instructions for registering custom RFCs in PI 7.31. I could possibly have configured the target wrong but no error says so.
This is a File-->PI-->RFC scenario. The file processing is super simple and a configuration I have used successfully before. I would assume I'd get a different error if it couldn't parse the file.
Jody

Not shure if you already did but try getting some details with XPI Inspector. Also increasing log level for this category might help. You also may wanna check authorization (even if this should show with a different error text) in ECC using ST01.
My guts feeling is that there is something wrong with payload / signature of RFC.
Cheers
Jens

My 3.6.14 keeps trying to update and gives this error message:"The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again."

My OS is Windows XP version service pack 3. I even tried to install FF4 but it never get installed. As I mentioned my FF keeps trying to update itself but it gives the error message I provided in title. Now I don't have access to my FF browser and my life is stopped because I have all my passwords saved on FF. I restarted my notebook but it stills try to update itself giving the same error message. I can not also upgrade my Adobe reader 7.0.7 to 10 I have tried more than 10 times but it never gets upgraded. I had this Adobe problem since long time ago.

Run the Firefox program once as Administrator (right-click: Run as Administrator). 
If that doesn't help then do a clean reinstall.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

When i use oracle vwp give this error (java.lang.IllegalArgumentException:

sir i use oracle with vwp
sir see my code this code goto catch (Exception e) section and give this code in textfield
" java.lang.IllegalArgumentException: luser.username "
when i use mysql that give right result but when use oracel that give me this error
try {
RowKey userRowKey = luserDataProvider.findFirst
(new String[] { "luser.username" },
new Object[] { textField4.getText()});
if (userRowKey == null) {
textField3.setText("11111");
return null;
} else {
textField3.setText("22222");
return null;
catch (Exception e) {
log("Cannot perform login for userid " + textField3.getText(), e);
error("Cannot perform login for userid " + textField3.getText() + ": " + e);
textField3.setText(e);
return null;
please give me idea how i get right result
thank you

please check Article-ID "Positions Hierarchy Edittor Shows Error Your Userarea Applet Has Caused A Runtime Exception [ID 1151488.1]" in MOS...
HTH

OSEHQ is compressed (notebook won't load windows and gives this error message)

Hi there,
my noetbook wont start windows, and gives this message when i turn it on-
OSEHQ is compressed
Press ctrl+alt+del to restart
The last thing I remember doing was compressing my C drive to save some disk space.
please HELP!

Yep, compressing the hdd can cause all sorts of problems.
http://www.vistax64.com/tutorials/202609-bootmgr-compressed-message-boot-fix.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I have error in my call manger 7.1 and it give this error message '' 1783 smart array E200 failer ''

hi Colleagues
any one facing this problem before and what is the solution .

Hi!
Can you give us some more details? Where does this message appear? Is in your phone or in your computer? What's your locale? The more information you can give us the better.
Are you using the add-on and Firefox 4? If so, I'll ask you to disable and remove the add-on: Sync is now part of the Firefox Browser and you don't need the add-on. [https://bugzilla.mozilla.org/show_bug.cgi?id=644894 Some users solved this issue by uninstalling the add-on.
]

Rikaichan (add-on) doesn't work at my office. It gives this error "Javascript application: the index for one or more dictionaries needs to be created. This may take a while on slower computers". And then the PC freezes. What should I do?

I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
'''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?

venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

SharePoint 2013 Error Exception from HRESULT: 0x80131904 Some sites are working while others give this error

I can access some of the sites, but others are throwing this error code... not sure why it appears that it is every other site almost...
I can actually get this error, at a top level site, go to a sub-site and that site is displayed.
Any ideas on how to resolve this error..
the Central Admin site is down also, just a blank page is returned. no error message...
we were able to add extra space on the VM brought back the sites but now the Central Admin site throws a 404 not found...

Hi ,
According to your description, my understanding is that after adding extra space on the SQL server VM, the error 0x80131904 disappeared, but the CA got 404 error. Is it right?
Afer adding extra space on SQL server, make sure the SQL server is online and run SharePoint 2013 Products Configuration Wizards, when running, select “don’t disconnect from the server farm”.
Check whether this issue occurred on other machines. If CA is working from other computer and only server is facing this issue then you need to create diableloopbackcheck registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa. The value should
be 1 .
Please go to IIS->the server->ISAPI and CGI Restrictions, check whether there are four 'Microsoft SharePoint Foundation 2010' entries. If not, you need to create the following entries with the name as 'Microsoft SharePoint Foundation 2010':
                 C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_aut\author.dll
                 C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\_vti_adm\admin.dll
                 C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\shtml.dll
                 C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\isapi\owssvr.dll
Check Allow extension path of execute to allow the restriction to run automatically.
If this issue still exists, please check the log file to find more information about this issue. The path of the log file is : C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Or you can use Event Viewer(Start->Run->event viewer) to find the log.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

PI 7.31 (single stack) posting RFC gives this error: RFC_ERROR_SYSTEM_FAILURE: Processing of change number CO-01234 cancelled (raised by system ECCHostXYZ)

Similar Messages

Maybe you are looking for