Picking the right quoattion and the value should show in PO

Dear All,
When comparing quotations the CST and VAT applicable Suppliers where VAT may be Cenvatable or Not and CST is not Cenvatable .After maintaining comparision in quotations it has to pick the right supplier quotation depending on which condition type and should show in the PO as Non Deductable Tax.
It should differenciate with the Cenvatable amount and Non Cenvatable amount which should show in PO
Please suggest me which are all Condition types with Controal data should i Difine in my Pricing Procedure.
Thanks,
Tiru

Hi,
VAT and CST comes from Tax Procedure and depends on the Tax Code which you maintain in RFQ in ME41. You can see Taxes in ME47, select line item And click menu Item > More functions > Taxes
And once you finalise the quotation and go for PO creation w.r.t. RFQ, it copies the Tax Code automatically in PO. You can see "Taxes" under "Invoice" tab at item details level in PO.

Similar Messages

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Bad video card, call Apple, get a case number and return it.

I try to get my first access and add a book to my library but all it says is E_ADEPT_CORE_USER_NOT_ACTIVATED...and it keeps telling me this although i have the right email and the right password...i am using a tolino..i just got it so it acnt be an update

i try to get my first access and add a book to my library but all it says is E_ADEPT_CORE_USER_NOT_ACTIVATED...and it keeps telling me this although i have the right email and the right password...i am using a tolino..i just got it so it acnt be an update problem

Eva:
Yes, updated to firmware version 1.28. That was the 1st thing I did.
Then I authorized my iRiver. ADE had been installed way before I got
iRiver. It has a couple library books there. I hoped to read them on
iRiver. After I read this thread and another one at
http://www.mobileread.com/forums/showthread.php?p=1832825, I used
CtrlShiftE and CtrlShiftD to de-authorize both my computer and the
device. Then authorized both and had to download books again, deleted
previously copied books from iRiver and copied fresh copies. No luck.
Don't know what to do next. Emailed iRiver.

Black bar along the right side and the bottom of the screen- DV5-1007ca

I have DV5 1007ca running Vista Home Premium 32-bit.My computer seems to suddenly think my monitor is a different size. I have a 3-inch black bar down the right side of the screen and about a 1/4 inch black bar along the bottom. My windows are still fully functional and completely fill the portion of the screen that is active. There is no loss of image, it's just framed by the black bars. If I do a Print screen and paste it into a document, the black bars are not there. It's as if the computer thinks the screen is a different physical size. This situation is present all the time, even when starting up. This is what I have done so far: -adjusted screen resolution settings = no change-rolled back my display drivers = no change-re-updated my display drivers = no change-rolled back my BIOS = no change-re-updated my BIOS = no change-System recovery = no change I searched posts here and elsewhere but the results were inconclusive. A couple of posters reported a virtually identical problem and were told they needed to replace either their screens or their graphics cards. Unfortunately, none of those posters ever reported back so it was unclear whether or not the issue was resolved. I doubt it is the screen since screen problem symptoms usually involve bits of screen not working and parts of the display being lost. My screen seems to be working fine, it just thinks it's smaller than it is. The graphics card is highly suspect. What's funny is that a little while ago, I started up my computer without changing anything and all was well for about a week and then it went back to the same old issue. Any helpful advice would be appreciated. This issue is driving me nuts!

I found a real solution that is hardware related. I was given a laptop with this exact same problem for free since my friend thought it wasn't worth paying to repair a 3 year old laptop, and was dead for almost a year (I think they manufactured these in 2008, but HP has almost no specs or info about them, specially ours; DV5T-1100) I have the solution to this problem, and is a solution not found almost anywhere using Google, and HP support doesn't want to tell you, simply don't know, or would make them look bad. I was able to fix it myself by using a rework station (basically a dedicated hot air gun) that I used to "reflow" the graphics chipset's connection to the board (keep reading, because this method may vary on result details). This simply means that I opened the laptop, removed the copper heatsink connected to the fan to expose both the micro-processor, and the faulty graphics chipset, and started cutting soda cans, or thick tin foil to cover the areas AROUND the graphics chipset, and leave the graphics chipset exposed so that the really hot air would concentrate only on TOP of the graphics chipset. Then, I put the device on 220 degress, with the tip of the gun 2 inches over the chipset, and circled the gun around heating that sucker for 5 minutes, then I did a 3 minute rest to cool off, and a final 5 minutes reheat again. Luckily enough it WORKED!, and it has been working for almost 10 months with heavy use. HOWEVER... doing a "reflow" like this on a micro component isn't reallt a proper fix. Sure you may get lucky, and I read of instances where the fix lasted for years, but also just months. This is because the problem is the old solder that connects each "ball" point under the chip to the motherboard may have a micro ultra tiny imperfections and misconnections on a few or many of the connected points cause by a long period of overheat of the chip due to both, a very bad heatsink, and heatflow of heat inside the laptop, and also (and usually) really bad maintenance on the user's part by having a really dirty and dusty vents, overuse, and blocking the ventilation exhaust of the laptop itself over time. A proper fix of this chip issue is another process called "reballing", where they actually properly overheat that particular chipset so much using IR heat, and an expensive machine, to "loosen" the solder of all connections and remove the chip itself to both, clean the old solder on the chip, and the old solder left on the motherboard, and actually REPLACE all solder with new lead solder. However, this process has to be very precise (hence the machine), and it maybe costly, and there's also the fact that MANY scammers out there either never really do a true reballing, ans just do a reflow to scam you, or don't have the experience to do a proper reball of the chip. So whose at fault here? Uneducated users that neglect learning how to properly maintain a laptop off its main enemies (dust and heat) no matter how good the hardware heatsinks may be, or is it poor hardware design by the manufacturer, where other brands or even other families of series off the same brand have actually better noticeable hardware design than these DV series that are so notorious to overheat easier than others out there? Well, I don't know, but I do know that you should be VERY careful having these laptops repaired and be scammed, because hey! Even so called "refurbished" or even so called "brand new" entire motherboard out there on Ebay are just bad reflow jobs with little to no warranty on them on purpose, to only last a few months on purpose. So, watch out, and THINK! before spending money on a beat up poor donkey.

The pages have not got the right size, and the scrollbuton dissappears. and the textboxes seems to have a "reverse tab-button atomatically applied... and the lit over previously vissited pages flashes right and left... what do I do to fix it?

help me?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How can I get ITunes and mail to quit opening automatically ? I have done the right click, and it does not show that it is set to open at login and preferences doesn't help either ..???

i have tried the options is past answers, but they dont work or when they say 'go to preferences' I dont have the same options on this Mac that they do
any help is most appreciated ..
thank you

i have tried the options is past answers, but they dont work or when they say 'go to preferences' I dont have the same options on this Mac that they do
any help is most appreciated ..
thank you

Sound on my headset is coming from the small holes on iphone 5. The small holes next to the big ones on the edge. When i listen to music, I must put the left headset in the right ear and the other in my left ear. How can i change it back?

http://media.primeinspiration.com/files/photos/1349086808b70eac_l.jpg
See the those small holes? Thats where my music sound is coming from.
Thanks in advance.

Connect the headset to a computer or stereo or anything else with 3,5mm minijcack to see if the headset is ok of they work there then your headset is defect if not your phone is the problem

Whenever I try to unlock my phone, the slider gets stuck on the right side and the whole phone freezes and i have to restart the device. Any advice??

Somebody please help me, this is very frustrating

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.

I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

I can't connect my mac to my TV, I have the right cables and have done it right but I still doesn't get the macscreen on the Tv, what should I do?

What are you getting on the TV? Are you getting a completely blank screen, or are you getting a message similar to 'no input detected'? Or are you seeing the spiral galaxy desktop? If you go into System Preferences -> Displays then do you have an 'Arrangements' tab?

Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

Hello I really want to start developing apps but have no knowledge of development I know it's one of those things you have to start somewhere and build on it but can someone point me in the right direction of where I should begin such as books etc

Hello I really want to start developing apps but have no knowledge of development I know it's one of those things you have to start somewhere and build on it but can someone point me in the right direction of where I should begin such as books etc

iOS or Mac apps?
Have you paid the fee to sign up as a developer yet?
Ken

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.

I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode.
Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!! I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

Drag it over to the Left. Then lock it there.

Has anybody else been seeing (Not Responding) at the top of the screen and having thier browser not respond to wheel scrolling and scrolling with the usual slider at the right part of the screen?

I have noticed my Firefox browser is having way too many incidences where it is "Not Responding". The browser freezes up for a second quite often and the "Not Responding" message will appear at the top of the screen.
The browser will also not scroll with either the scroll bar on the right nor with the mouse wheel. Both used to work in previous versions of Firefox, but it seems to have gotten worse since Firefox 5 0r 6. The same with the "Not Responding". It is happening more with Firefox 7 than in at least the past two versions.
Anybody else having these issues? Seems like they are hand-in-hand. Thanks for any and all help or advice. It's making me pretty angry since I'm online all day for work.
Just an FYI. At the bottom of my troubleshooting copy/paste is a suggestion to update the driver for my graphics. That was a no-go. I tried that.

Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
Thanks again, I'll get back with results once I get the wounded laptop back up and running.

I need to know the right tools and java technology

Please help,I need to know the right tools and java technology to support what I need.
I had background programming in Assembly,C++,Visual Basic,SAP/ABAP 4.
All I can say, programming is about logic, now we are very helped building program using objects.
I'm very interest to SAP tech, where all screens, programs, reports are resides on tables, this is the real dynamic!
CUrrently I'm eager to do the same technic with java. I'm new to java....
What I know the J2EE is the core for me to start is it right? I was very interest with the Client-Server Tech. How can I impelemet this with Java?
I'm a bit confuse with so many java solutions. There is Java Applets, Swing, Java AWT, JavaBeans, etc...
I don't know what is the best if I want my Presentation/Client Application will run within browser (not standard html, using like windows gui). What should I do to make business logic objects, how to invoke it within the gui. how to make installation package whenever clients connect to the http server.
if you have a pointer to do it please let me know.... I'm very appreciate all your response...
Best regards,
Lucky Pangemanan

I'd say - don't get carried away with the heavyweight frameworks. Don't use EJB if Hibernate and/or Tomcat will do the job. There's a danger of winding up using a bulldozer to crack a wallnut.
What people mean by "J2EE" varies a fair bit.
Start with Tomcat, which has the virtue of being free. Try some JSPs and servlets.
Use Applets to do client side presentation only if you must; Applets create an installation overhead on end-users, and some of them can't cope, while others may not have the necessary installation permissions on their office machines. They are pretty rarely needed, IMNSHO, most client-side behaviour is better handled with html and JavaScript.

Picking the right quoattion and the value should show in PO

Similar Messages

Maybe you are looking for