Excise Value and Freight value should be add to material cost in the depot

Hi,
Can any one help me on my scenario?
We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot
Thanks & Regards
KMR

Hi All,
In Depot Sale. This are the Excise Duty Passed on to the Customer BED, AED ECS, SHECS, Other then that its added to the material cost. Define a Pricing procedure for value added to the material cost in both Procurement & Sales base your problem will be solved.
Regards,
Pherasath

Similar Messages

Freight charges should not add to Material Cost

Dear All,
We are maintaining the Freight Charges condition in Pricing Procedure for Stock Transport Order process, as per SAP standard the Freight charges will add to the Material Cost for receiving Plant. But we dont want to add the Freight Charges for Material Cost.
Please let me know how to avoid the Freight Charges adding to the Material Cost.
Thanks & regards,
Dhanu

Dear Dhanu,
Add the condition type at header. So it will not be distributed among individual line items.
I hope this will help you.
Regards,
Ganesh

Freight value to add in material cost

HI.
I have freight condition FRA1 i which i ticked Accrual key in M/06,I have assigned FR6 account key to it in pricing.I don't want to calculate the tax on freight ,so i ticked statistics key in Pricing for Freight cond.(FRA1)
Then also freight value is not adding in material cost .
What would be the reason?
Please provide suitable solution.
Thanx & Regards

Hi,
Normally if you mention statistics for a condition, then the value will not add to material cost. You remove the statistics for the condition.
Also check for that condition type, have you maintained accrual check box.(tick mark for accrual inside condition type).
If you dont want to add frieght value for tax calculation, then give the step number accordingly.
Regards,
Prabu

Report on OA target value and net value

Hi all,
Is there any standard report that can list out the target value and net value of a number of OA? The values are similar to ME33K -> Header -> Statistics -> General. Thanks.

Thanks all. I had found the answer. It should be transaction ME3L, change layout to select "Released value" and mark the column to show total value.

APC Value and Plan Value for an Asset.

HI Gurus,
I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

Hi,
why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
Regards,
Markus

ABAP program to neutralize 0Unit value and 0quantity value

Hi all,
I'm not expert in ABAP, and i would like implement a small abap program (routine)in my cube.
I would like neutralize the 0UNIT value and 0QUANTITY value only when 0VTYPE = 1 or 2 :
<b>in other words, if 0vtype = 1 or 4 then 0unit = space and 0quantity = 0
b]
Can you tell me please <b>how and where</b> write the ABAP program please ?
Message was edited by:
Pontoise Pontoise
Message was edited by:
Pontoise Pontoise

Hi,
I amnt able to understand your requirement. But the code for which you asked is simple.
If 0vtype = 1 or 0vtype = ' '.
0unit = space.
0quantity = 0.
endif.
Regards
Aneesh.

Net value and assesable value

Dear Experts,
In Import pricing procedure we different pricing condition like
1.PACKING AND FORWARDING
2. SUPPLIER INSURANCE
3. OCCAN/ AIR FRIGHT CHARGES
4.IMPORT INSURANCE
5. LANDING CHARGES
to obtain NET VALUE which are pricing condiion value has to added
Please tell me what is difference between Net VALUE and ASSESABLE VALUE,
THIS

Hi,
Net value is basic material price with includes all delivery cost & fright.
Asseable value is
Basic price (% of material value) depent on product & chapter ID. (Custom will provide abetment for product)
Fright (Import)
Insurence cost
Landing cost 1%
SAM
Edited by: Saminathan Gopalan on Jun 9, 2010 4:19 PM

Urgent! Display lookup value and return value at the same time.

We are using pop up lov.
How can we display lookup value and return value at the same time. let me claer..
Our lov query is like fallowing
select dname, deptno from dept
we want to return deptno column into a database bind text item and dname column into a display item (look up)
can we do it (we need to do)
thanks for your help.

We did it .
But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
(Report Attributes pages Tabular Form Element section display As property list)
can we set or not.
Thank you.

Integer values and decimal values in weblient UI - Display mode

Hello,
i have developed an custom assignmentblock with some custom fields.
Some of this fields are integer values and text values.
Some other fields are decimal values.
I face the issue that this decimal values are in display mode right-aligned all other fields are left-aligned.
In edit mode all values are right-alligned.
How can i change this behaviour? All values left-alligned in display mode!
Otherwise this looks strange.
Thank you
Kind regards
Manfred

Hi,
Decimal values will be displayed right-aligned. To change that you need to modify the GET_M method.
In get_m method, you have to change the attr datatype to string.
Data: attr type string.
Data: dref type ref to data.
Get reference of attr into dref.
Regards,
Arun
Edited by: Arun Kumar on May 14, 2010 3:03 PM

Posted values and unposted values

Hi,
Could anybody please tell me whats posted values and unposted values?
Thanks.

Hi Komalapriya,
I can imaging two scenarios where the word "posted/unposted value" makes sense.
1. If you have a master data value which is not being used in your transaction data, then this master data value in an unposted value.
2. If you have transaction data with empty characteristic values (which are shown as "#" in your reports), then these values could be named unposted values as well.
Kind regards,
Stefan

Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

Open excel sheet through program calculate value and fetch value in program

Hi experts,
My requirement is to open a excel sheet while i execute a report,There is some calculation that i need to do in excel sheet and want to fetch the calculated value back in to my program.
Is there any way of doing so ?
Regards,
Kashyap

Hi Aditya ,
let me once more clarify with ur requirements .
User is uploading an excel sheet.
U doing validations on the records and getting the error in records.
Displaying the uploaded excel sheet to user to rectify the errors.
and then update the databse with the correct records.
So for the above
use WS_upload ,GUI_Upload FM for uploading the excel sheet in itab.
using this itab ,Dynamically add one more column for the errors.
Refer :Re: Could anyone tell me how can I add columns in a internal table dynamically?
Display records in an editable ALV grid.
BCALV_EDIT_01
BCALV_EDIT_02
BCALV_EDIT_03
BCALV_EDIT_04
BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDITABLE
Also see this
http://www.sapdevelopment.co.uk/reporting/alv/alvscr.htm
then update the database
Regards
Renu
Edited by: Renu Gusain on May 8, 2009 8:40 AM

Assessable Value and Wrong Value in SEcess in first row in J1IS

Hi,
This is a scenario of Vendor Return when we are returning multiple excisable materials to Vendor.
I have created Return Delivery using movement type in MIGO with choosing the option Part 1 only.
In J1IS,
The First problem is the assessable value which is coming wrongly as 111.11 whereas the gross value of the material is Rs. 100 only with Excise Duty 10% BED, 2% ECess and 1% SEcess & 2% CST.
The second problem is
The duty values are showing correct in the screen e.g., BED 10, ECS 0.2 and AT1 0.1 (according to gross value 100, 10% BED, 2% ECess and 1% SEcess )
There are total five items with the same gross value and other duties (gross value 100, 10% BED, 2% ECess and 1% SEcess)
But as soon as the transaction is saved, the AT1 value against first row changes wrongly from 0.1 to 0.6 and the same is flowing to the table.
Can any one provide some idea to resolve this?
Thanks in advance

Hi,
Please check my previous reply on this "Get Excise Invoice" problem thro' the link provided below.
Re: J1IS: u2018Get Excise invoiceu2019 not showing any values
Regards,
Siva

How to display integer values and decimal values in same column in a table

hi
in my report amount column is there in that column integer values (2234) and decimal values (3562.34)
i want to print this values as 1000 separate as like 2,234 as integer and 3,562.34 as decimal
but this values print like 2,234.00 as integer and 3,562.34 as decimal

Hi akilreddy,
Per my understanding you have an field which data type may be "float" in the DB, so it have value which format like "2234" and "3562.34" in the same column, now you want to format them differently in the report, right?
I have tested on my local environement and you can use the expression in the custom format in the Textbox properties to do this:
Right click the field which you want to add the format and select the "Text Box Properties"
Select the "Number" on the left pane and using expression below in the Custom format:
=IIF(Split(Fields!yourfieldname.Value,".").Length=2,"#,###.##",Nothing)
Or you can just use "#,###.##" in the format.
Preview you will go the result like below:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Input template enter a Year value and spread values out across

my templte is as follows:
GL codes down the right ( Got that)
Company codes across the top (got that)
what I want to happen in the ensend - is the values being entered to be divided by 12 and sent to each month. basically the guy is going to enter a Year value and i want that value spread out across the year and accosciated with the correct company code. i cant get it to work.
Any ideas?

If you have a spreadsheet and will be using ONLY Accounts on ROWS, and then assuming each COLUMN is a COMPANY code and Value for 1 12 month period, I would use Script logic for this process.
THe idea would be to send the 12 months to a datasrc intersection called 12MOALLOC, so that you store the original value and may always evaluate it or change it going forward, and send the value to a time meber such as 2010.INP, or Total entry time. I would use an EVDRE structure, to simplify the sheet. In the Script logic, I would define that when you see the datasrc and the year, using a property or direct variables, divide it by 12 and place in each of these 12 statements for each month or using a IF loop in the script. There are examples in the HELP that should give you some assisatnce to building this process out.
Hope this helps.

Excise Value and Freight value should be add to material cost in the depot

Similar Messages

Maybe you are looking for