Picture in screen painter
Hi,
How to insert a picture in screen painter.?
Thanks,
Suresh
Hi
first Upload the image in SMW0 in binary format and give name as 'Zimage_LOGO'.
Below find the code to display Image in module pool program
Data : CL_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
CL_PICTURE TYPE REF TO CL_GUI_PICTURE,
WA_HTML LIKE W3HTML,
WA_MIME LIKE W3MIME,
WA_PARAM LIKE W3PARAM,
WA_QUERY LIKE W3QUERY,
LV_URL(256) TYPE C,
PIC_SIZE TYPE I,
LV_text(28) TYPE C VALUE 'Image Display Example'.
In PBO event write below code
IF CL_PICTURE IS INITIAL.
Create controls
CREATE OBJECT CL_CONTAINER
EXPORTING
CONTAINER_NAME = 'CL_CONTAINER'.
CREATE OBJECT CL_PICTURE
EXPORTING
PARENT = CL_CONTAINER.
CALL METHOD CL_PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = CL_GUI_PICTURE=>DISPLAY_MODE_FIT_CENTER.
WA_QUERY-NAME = '_OBJECT_ID'.
WA_QUERY-VALUE = 'Zimage_LOGO'.
APPEND WA_QUERY TO IT_QUERY.
APPEND WA_HTML TO IT_HTML.
APPEND WA_MIME TO IT_MIME.
CALL FUNCTION 'WWW_GET_MIME_OBJECT'
TABLES
QUERY_STRING = IT_QUERY
HTML = IT_HTML
MIME = IT_MIME
CHANGING
RETURN_CODE = WA_PARAM-RET_CODE
CONTENT_TYPE = WA_PARAM-CONT_TYPE
CONTENT_LENGTH = WA_PARAM-CONT_LEN
EXCEPTIONS
OBJECT_NOT_FOUND = 1
PARAMETER_NOT_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
PIC_SIZE = WA_PARAM-CONT_LEN.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
TYPE = 'image'
SUBTYPE = 'X-UNKNOWN'
SIZE = PIC_SIZE
DATE =
TIME =
DESCRIPTION =
LIFETIME = 'T'
CACHEABLE =
SEND_DATA_AS_STRING =
FIELDS_FROM_APP =
TABLES
DATA = IT_MIME
FIELDS =
PROPERTIES =
COLUMNS_TO_STRETCH =
CHANGING
URL = LV_URL
EXCEPTIONS
DP_INVALID_PARAMETER = 1
DP_ERROR_PUT_TABLE = 2
DP_ERROR_GENERAL = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CALL METHOD CL_PICTURE->LOAD_PICTURE_FROM_URL
EXPORTING
URL = LV_URL.
ENDIF.
ENDIF.
Hope it shall be useful
Regards
Santosh
Similar Messages
-
How can i place an in image in the screen painter?
Hi, first checkout whether your picture is present in your server or not.
i am pasteing a code where i have taken sap enjoy pictur which is present default.
Please see that your custom container name when u create for picture in screen painter will be PICTURE_CONTAINER1.
Copy paste this code....
In TOP declarations....
TYPES pict_line(256) TYPE c.
DATA :init,
container TYPE REF TO cl_gui_custom_container,
editor TYPE REF TO cl_gui_textedit,
picture TYPE REF TO cl_gui_picture,
pict_tab TYPE TABLE OF pict_line,
url(255) TYPE c.
in PBO
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZTECH'.
SET TITLEBAR 'SELECT'.
IF init is initial.
init = 'X'.
CREATE OBJECT:
container EXPORTING container_name = 'PICTURE_CONTAINER1',
picture EXPORTING parent = container.
ENDIF.
IMPORT pict_tab = pict_tab FROM DATABASE abtree(pi) ID 'ENJOY'.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'IMAGE'
subtype = 'GIF'
TABLES
data = pict_tab
CHANGING
url = url.
CALL METHOD picture->load_picture_from_url
EXPORTING
url = url.
CALL METHOD picture->set_display_mode
EXPORTING
display_mode = picture->display_mode_fit_center.
ENDMODULE. " STATUS_0100 OUTPUT
Hope this helps.
Thks -
Expand/Collapse a frame in Screen Painter
Hi,
I have a requirement to implement the Address screen and have a problem to add an collapse icon in a Frame.
I found in transaction CRMD_BUS2000126 window, where the frames are implemented.
In screen painter I can only put the appropriated fields. I want to have the possibility to collapse or expand the frame with address or personal data like on the picture below.
http://img713.imageshack.us/img713/711/collapse.jpg
How can I set fields dynamically on the screen??
Regards,
Piotr.Hi,
I have a requirement to implement the Address screen and have a problem to add an collapse icon in a Frame.
I found in transaction CRMD_BUS2000126 window, where the frames are implemented.
In screen painter I can only put the appropriated fields. I want to have the possibility to collapse or expand the frame with address or personal data like on the picture below.
http://img713.imageshack.us/img713/711/collapse.jpg
How can I set fields dynamically on the screen??
Regards,
Piotr. -
Having Problems with my Screen Painter
Hi,
I'm new to SAP and I'm still learning. I'm on this part of tutorial wherein I am trying to create a Screen using the Screen Painter. But the problem is, the interface of SAP in the book looks something like this:
http://www.kodyaz.com/articles/sap-abap-tutorial-alv-grid-cl_gui_alv_grid-screen-painter.aspx
But my interface looks different. I'm sorry I can't post the picture here but It can be well described. It looks like a "notepad" with horizontal lines.
Has anyone encountered this kind of screen painter? Hope someone could help me.
Thanks.Hi,
Do you receive some error like 'Graphical Layout Editor not available 37527'. Does the problem occurs only for some users or for all the users?
If the issue is for all users, I suggest to check notes 101971 and 204910.
If its for a particular user, please make sure "graphical layout editor" is checked under SE51->munu Utilities/settings->tab ScreenPainter.
Hope this info helps,
Br,
Javier -
Insert a photo in screen painter or tab strip
Hi,
Please give me a solution for how to insert employee photo like jpeg in screen painter or tab strip control
thanks,
sureshHi,
Follow these step.
1. save that photo into bmp or tiff format.
2. Upload it into se78.
3. create a custome container with name 'PICTURE_CONTAINER'
*& Report ZRU_DISPLAY
REPORT ZRU_DISPLAY.
call screen 700.
*& Module STATUS_0700 OUTPUT
text
MODULE STATUS_0700 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: W_LINES TYPE I.
TYPES PICT_LINE(256) TYPE C.
DATA :
CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
EDITOR TYPE REF TO CL_GUI_TEXTEDIT,
PICTURE TYPE REF TO CL_GUI_PICTURE,
PICT_TAB TYPE TABLE OF PICT_LINE,
URL(255) TYPE C.
DATA: GRAPHIC_URL(255). DATA: BEGIN OF GRAPHIC_TABLE OCCURS 0,
LINE(255) TYPE X,
END OF GRAPHIC_TABLE.
DATA: L_GRAPHIC_CONV TYPE I.
DATA: L_GRAPHIC_OFFS TYPE I.
DATA: GRAPHIC_SIZE TYPE I.
DATA: L_GRAPHIC_XSTR TYPE XSTRING.
. CALL METHOD CL_GUI_CFW=>FLUSH. CREATE OBJECT:
CONTAINER EXPORTING CONTAINER_NAME = 'PICTURE_CONTAINER',
PICTURE EXPORTING PARENT = CONTAINER. CALL METHOD CL_SSF_XSF_UTILITIES=>GET_BDS_GRAPHIC_AS_BMP
EXPORTING
P_OBJECT = 'GRAPHICS'
P_NAME = 'ABHITECH'
P_ID = 'BMAP'
P_BTYPE = 'BCOL'
RECEIVING
P_BMP = L_GRAPHIC_XSTR
EXCEPTIONS
NOT_FOUND = 1
INTERNAL_ERROR = 2
others = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. GRAPHIC_SIZE = XSTRLEN( L_GRAPHIC_XSTR ).
L_GRAPHIC_CONV = GRAPHIC_SIZE.
L_GRAPHIC_OFFS = 0. WHILE L_GRAPHIC_CONV > 255.
GRAPHIC_TABLE-LINE = L_GRAPHIC_XSTR+L_GRAPHIC_OFFS(255).
APPEND GRAPHIC_TABLE.
L_GRAPHIC_OFFS = L_GRAPHIC_OFFS + 255.
L_GRAPHIC_CONV = L_GRAPHIC_CONV - 255.
ENDWHILE.
GRAPHIC_TABLE-LINE = L_GRAPHIC_XSTR+L_GRAPHIC_OFFS(L_GRAPHIC_CONV). APPEND GRAPHIC_TABLE. CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
TYPE = 'IMAGE'
SUBTYPE = 'X-UNKNOWN'
SIZE = GRAPHIC_SIZE
LIFETIME = 'T'
TABLES
DATA = GRAPHIC_TABLE
CHANGING
URL = URL. CALL METHOD PICTURE->LOAD_PICTURE_FROM_URL
EXPORTING
URL = URL.
CALL METHOD PICTURE->SET_DISPLAY_MODE
EXPORTING
DISPLAY_MODE = PICTURE->DISPLAY_MODE_FIT_CENTER.
ENDMODULE. " STATUS_0700 OUTPUT
This will solve ur requirement. -
Error while opening a screen painter
Hi all,
I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for your help!
Regards,
PritiFor the Future Problem Facers:
I too faced the same problem and the below steps helped me.
Re: SFLIGHT is NOT defined for the current logical database.
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled. -
F4_FILENAME in search help in screen painter
Hello gurus,
I want to design a screen in which the text input field is used to get file name. For that i need to enable file search in local folders and drives with f4 key press. I wish to use the functionality of function module 'F4_FILENAME" in screen painter. How can i do that?
I tried creating search help for RLGRAP structure. It compiles fine but gives the message 'No inout for selection'.
What should i do?Thank you all,
The problem has been solved.
I am posting the final code.
1. In se38, i created program zprogram.
2. In se51, i created a screen for the program zprogram.
3. In layout, i took 2 buttons and one input/output field.
1st button for import and 2nd button for exit.
4.In flow logic-
i wrote the follwing code.
PROCESS BEFORE OUTPUT.
MODULE STATUS_100.
PROCESS AFTER INPUT.
PROCESS ON VALUE-REQUEST.
FIELD FILENAME1 MODULE F4_FILE_SEARCH.
5. IN THE MAIN PROGRAM
i wrote the following code-
REPORT ZPROGRAM.
DATA: FILENAME1 TYPE RLGRAP-FILENAME,
OK_CODE TYPE SY-UCOMM.
CALL SCREEN 100.
MODULE F4_FILE_SEARCH INPUT.
OK_CODE = SY-UCOMM.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
FIELD_NAME = 'FILENAME1'
IMPORTING
FILE_NAME = FILENAME1
ENDMODULE.
MODULE STATUS_100 OUTPUT.
CASE OK_CODE.
WHEN 'IMPORT'.
MESSAGE 'THE FILE IS RECIEVED' TYPE 'I'.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
I REFERRED TO THE DEMO PROGRAM MENTIONED
IN OTHER POST
NAME OF THE DEMO PROGRAM IS - DEMO_DYNPRO_F4_HELP_MODULE -
How to create a drop down box and text box in screen painter?
Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
land1 TYPE t005t-land1,
natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
FROM t005t
INTO TABLE i_t005t
WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
w_natio-key = i_t005t-land1.
w_natio-text = i_t005t-natio.
APPEND w_natio TO i_natio.
CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
values = i_natio
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
mark type c , "This is to select the record.
matnr like mara-matnr ,
matkl like mara-matkl,
maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O -
Is it possible to display the standard function keys in screen painter
Hi ,
I design a screen in se51 where I use push buttons and input/output buttons and so on in the layout, here in the layout or in my final output screen(when i assign this screen to a transaction) I would like to display other standard keys, ie the function keys and application toolbar items. I would like to know whether there is a possibility to do this , if yes then how?
In a menu painter there is a possibility where I can customize the keys or I can use the standard keys by going to se41 extras->adjust template. Is there similar possibilities in the screen painter.Ok I see. I should use &var.
Edited by: xerosaburu on Aug 18, 2009 11:37 AM -
Is there any possible to display the text in big font in screen painter
HI all!
i want to display the text in the large size in the text field in the screen painter in the odule pool programing.Is there any possible.What i have to do in the screen painter to display the text in the large size.Also is there any possible to put the color for the text.Give me replyHI
CALL METHOD o_dyndoc_id->initialize_document
EXPORTING
background_color = cl_dd_area=>col_tree_level1.
DATA : dl_text(255) TYPE c. "Text
CALL METHOD o_dyndoc_id->add_text
EXPORTING
text = 'Flight Details'
sap_style = cl_dd_area=>heading
sap_fontsize = cl_dd_area=>large
sap_color = cl_dd_area=>list_heading_int.
* Display document
CALL METHOD o_dyndoc_id->display_document
EXPORTING
reuse_control = 'X'
parent = cont
EXCEPTIONS
html_display_error = 1.
IF sy-subrc NE 0.
ENDIF.
by using these methods you can achieve i hope..
have a good day.
regards
sarves -
Issue with Screen Painter Add-On after patch updation
Hi Experts,
We are using 2007 B PL10. We upgraded to PL 11 and now we are getting the following error while trying to start the Screen Painter Add-On.
"Wrong Executable digital signature for Add-on"
Please help!
Thanks in advance
Ajith GHi Ajith,
Check the thread
Installing addons on client
Regards
Jambulingam.P -
Passing the values from selection screen to screen painter
Hello Friends,
I'm making one report program in which im calling one screen which i have designed, in my selection screen there is a select option for customer tht accepts value range now i want to select all the customers entered in select options and pass these values in screen(screen painter).
pls guide me how this can be done.
Regards,
SunnyScreen painter is a tool in ABAP dev workbench used to create the screens using the
T-code SE51. In the screen painter, you can define the following interface elements with their associated attributes.
1. Input/Output Fields
2. Field Names
3. Checkboxes
4. Radio Buttons
5. Group Boxes
6. Sub screens.
7. Pushbuttons with No Fixed Position
Create a Z program in tcode SE38.
Go to transaction SE51.
Enter the created program name and screen number.
Click on flowlogic tab.
Uncomment the statement u201C MODULE STATUS_0100 u201C.
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'DISPLAY'.
SELECT SINGLE Fileds to selsct
INTO (interanl table or tablename-fileds)
WHERE Condition. WHEN 'CLEAR'.
CLEAR table.
ENDCASE.
ENDMODULE. -
How to show screen design in .srf (from Screen Painter) using SDK?
How to show screen design in .srf (from Screen Painter) using SDK?
You need to use the LoadBatchActions method of the Application object to load .SRF files.
John. -
How to insert tabstrip control in module pool screen painter
Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT -
How to read the contents of Input Field created via Screen Painter?
Hi All,
I have a module program / dialog program, on my second screen, I created an input/outbox field via screen painter of course,
now in my PAI, how can I read the contents of the input/outbox field?
Let's say the name of my input/outbox field is: P_WEKRS. Note: Get Parameter and Set Parameter is ticked.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
I want to get the value of the input/outbox field before my loop in table control? I thought that it will work like normal parameter in non-dialog programs.
Any helpful inputs will be appreciated/rewarded.
Thanks.
JaimeHi, Jaime
Do the following Change in you Follow Logic
PROCESS AFTER INPUT.
MODULE read_or_change_value. " Add this
LOOP WITH CONTROL TC_DATA.
MODULE MODIFY_DATA.
ENDLOOP.
Add the Bellow Module code in you Driver Program.
MODULE read_or_change_value.
DATA: P_WEKRS like " the Field on Screen. Must be the same name as on SCREEN. and Type must be same too.
" Here you will find the Value in that Variable or if you will change the Value here you will find it change on Screen
END MODULE.
Please Reply if any Issue..
Best Regards,
Faisal
Maybe you are looking for
-
Ultra high memory usage when deleting a slide show
Hallo, I have a DVD project with several menus and slideshows and a huge flowchart. I wanted to delete one of the slide shows. What happened then was that the memory usage rised up to over 2 GB. Not the usage of the exe shown in the windows task mana
-
Deploying WAR on Weblogic 10.3
Hello, I am using Weblogic 10.3 and my application runs very finely if deployed in an exploded form. Deploying the same application as a WAR is partially only successful as I get issues in reading the following files. 1. Toplink related XML files 2.
-
Printing problem with RTF file in java
Hi, i actually got code to print the RTF doc using java, it works fine if we give small content (some text), but throws error 'java.io.ioException: Too many close-groups in RTF " when actual bill content is pass. Thanks in advance
-
Title Font Defaults - Can they be Changed?
I do not like the default font and size on the Title pane I have chosen. Can these be defaulted to something else? If so, how do I change for the entire project versus having to change each clip?
-
Printing Problem to Adobe PDF printer
When I print to my Adobe PDF printer I comes out unreadable, but if I copy the unreadable text and paste into word I can read it. Unreadable text in Acrobat is in Courier, and readable in Acrobat is in Vernada (that's what is shows in word). Does an