Pixma MX432 wireless scanning function doesn't work
I just purchased a Pixma MX432 multifunction printer. I set it up for wireless connection. The printer portion works fine. When I run the MP Navigator 5.1 to run the scanner, I get an error message: Canon MP Navigator EX has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have used a Pixma MX 410 since July 2011, and it worked fine wirelessly for both the printer and scanner until about two weeks ago, when the wireless scanner quit working and I got the same message as above. I tried reinstalling the software with no success.
When the Pixma MX 410 ADF feeder quit working on a manual scanning function, I used my replacement guaranty and bought the Pixma MX 432. I still have the same problem.
My software is Windows 7.
Assistance needed, we purchased an PIXMA MX432 today, initially printing via LAN through an AT&T modem from two windows 7 64 bit OS laptops and one Apple Lion OS laptop. Went to dinner, came back can no longer print, message states that printer is not responding or is offline. Printer status: ON icon: green light. WIFI icon: blue light, unplugged waited three minutes and plugged back in. Same status, no print.
Similar Messages
-
since I got my new fixed disk my scan function doesn't work (HP Photosmart Premium All-in-One-Drucker - C309g), what should I do
Check whether you have the latest driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US -
I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?
aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply. -
HP 3330 MFP scanning function doesn't work
I have a HP 3330 MFP wirelessly networked to (2) computers via a WPSM54G. I am able to wirelessly print from both computers, but I am unable to scan from either. When I open the HP LaserJet Document Manager, and initiate a scan, I receive a message "hp LaserJet Scan Control Viewer...Unable to communicate with the device. The device is disconnected or powered off." (The MFP is "on", and if I power the HP 3330 MFP "off" and "on", the result is the same.)
If I connect the printer directly to the computer(s) via a USB 2 cable, the scanning function does not work - since the Linksys printer drivers were installed. (I also noticed in Control Panel -> Printers and Faxes, there are some printer functions (ie., Scanning, Fax) have been removed - since the Linksys printer drivers were installed on the computer(s); and Network HP LaserJet 3330 (shared) was added as the default printer.
Since the printing function works fine, I'm wondering if 1.) the installation of Linksys printer drivers on the computer(s), removed or altered the HP drivers/scanning function, 2.) if there is a printer driver that will allow the computer/printserver to recognize a scan command and/ or the printer, or finally, 3.) if the HP 3330 is simply not capable of perfoming all of the functions (scanning, faxing) that the WPSSM54G claims it is capable of perfoming...
Any ideas?
Thank you for your thoughts.
sajGot it working. The problem was with the firewall (Bit Defender). Once I turned it off, and connected the print server (wirelessly), the scan function worked like a charm. (It would be nice - in a perfect world - if when the print server experiences a problem, the Linksys software/ drivers would identify the cause, and at least point you in the right direction....you know, something like "...can't communicate with device, try turning off your firewall")
Hope this helps someone.
saj -
PhotoSmart 7510 scan function doesn't work right after updating Maverick
It was an ordeal but hp support was finally able to get my MAC to recognize my PhotoSmart 7510 all-in-one after the operating system was updated to 10.9.5. But now I get the scan function but I have no options as to size, dpi or what type file I want to save the scan to. Also, the quality is TERRIBLE. Granted I'm trying to scan old photographs but I was able to do this with no problem before. Now the grayscale is off and light areas of the images don't scan at all.
I know that all the drivers are up-to-date but I don't know how to fix this problem.Hey @LK8888,
Welcome to the HP Support Forums!
I understand that you want to be able to scan with good quality on your Mac OS X 10.9.5 Operating System from your HP Photosmart 7510 e-All-in-One Printer. I would like to assist you with resolving this issue. Now you did state that you had quite a time with HP Technical Support trying to get your Mac to recognize your Photosmart. I'm afraid that if your scanner isn't working properly we may have to undue some of the steps completed by Technical Support to resolve this issue once and for all for you. However, before I have you delete or remove any software and drivers from your computer, could I have you take a look at the following document to ensure that you're using the proper scan software:
Scan from OS X v10.9 Mavericks With the Full Feature HP Software for HP Multifunction Printers
If everything now works perfect, great! If not, than unfortunately I'm going to need you to run through the following steps.
Step 1: Uninstall your Printer Driver and Software:
Uninstalling the Printer Software
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
HP Photosmart 7510 series C311 Full Feature Software and Drivers
Please click the link above to download the appropriate Mac OS X 10.9.5 drivers for your product. Once the download is complete follow the step-by-step installation instructions to complete the install of your product.
Once install is complete, try to scan!
Please let me know if the steps provided resolve your scanning issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Scan function no longer working on my Printer
Recently moved locations and had to re set up my PC. Since then the scan function no longer works. I get the error message "Scanner reported an error", "Failed to open a session on the device". I have uninstalled and reinstalled the HP drivers, i have checked the internet connections and all are working. Actually have had a lot of troubles earlier with the rinter and the scanner re wireless connections but hoped to have finally overcome these.
Not part of the problem but a real gripe as to what is the purpose of wireless devices when they never work as well as the ethernet connected devices, someone really needs to get this sorted <gripe over>.
Can anyone help me please to get my system back up and running. I surgent now as currently on paternity leave and need to get some administrative issues doen from home in the next couple of days.
Many thanks,
This question was solved.
View Solution.StevieDoug,
Thank you for trying my recommendations, I believe this is a wireless issue. Let's go ahead and start troubleshooting the network:
I would like you to shut down the Router, Printer and Mac in that order. Wait atleast 60 seconds, then power on the items in the way they were shut down. Re-attempt the scan. Was this successful or are you still getting the error message?
If you are still getting the error message, let's try Pinging the Mac and testing the connection, click on the link below:
How to Ping on Mac OS
If pings are successful the issue is not likely communication, instead it is probably a firewall blocking the scanning communication. Continue below:
To turn on firewall protection:
1. Choose Apple menu > System Preferences, click Security, and then click Firewall.
2. Open the Firewall pane of Security preferences
3. Click the lock icon to unlock it, and then type an administrator name and password.
4. Click Start to turn on Firewall.
To allow only specified applications and services to connect:
1. Click Advanced.
2. Click the Add (+) button, and then select the application or service in the dialog that appears.
Are you able to complete the scan? Please let me know the results!
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
The to_date function doesn't work ?
Hello
I don't know why my to_date function doesn't work on my pc.
my statement is pretty complex so i just tried simple one
select to_date('10-Jan-2006','dd-mon-yyyy') from dual;
but even this one doesn't work it says it is invalid month
howcome?
is it because my Windows XP (not english version) doesn't recognise month Jan?
i tried it another place it worked
so is there any language pack / patch i need to install? ?
so does OS matters?
or how to fix this..please help meBy default SQL Developer picks up it's language settings up from (on Windows) the Regional and Language Options. You can see what it has set by querying the NLS_SESSION_PARAMETERS view.
Assuming you don't want to change to using DD-MM-YYYY formats for your months or change your regional settings on your PC, you need to tell SQL Developer which language you want, which you can do by adding the following lines to the file sqldeveloper\jdev\bin\sqldeveloper.conf:
AddVMOption -Duser.language=en
AddVMOption -Duser.country=US -
Hello,
I just purchased a Samsung ML2160 printer and it doesn't work with nor my Pages program, nor the Preview (to print PDF). No matter the way I tried, the Print function doesn't work and I cannot neither print or even enter the printer preferrences menu! My MacBook Pro has worked before with other printers, but now with the Samsung it doesn't work at all... Though, if I drag and drop a document, jpg, pdf in the printer queue, it prints just fine, but that method gives me absolutely no freedom to the printing... Could it be something from the Computer -> Machintosh HD -> Library -> Printers? Because a friend of mine was recently trying to save me some disk space, and therefore erasing part of the HP printer (to remove the previous printer I owned)...
If anyone has any idea, that would be much appreciated
Thank you in advanceDo the sensible thing, as you say neither Preview nor Pages print, try other programs eg TextEdit. If none of them print then it is a System problem and very likely the printer drivers are AWOL or were never installed.
Go to Samsung's website and download their software for the Mac:
http://www.samsung.com/uk/consumer/print-solutions/print-solutions/mono-printers /ML-2160/XEU-support
http://www.samsung.com/uk/support/model/ML-2160/XEU-downloads
Peter -
Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik -
Sort function doesn't work E12
the sort function doesn't work half the time on Elements 12 organizer.
What about FUNCTION CLOCK_INFormula
RETURN NUMBER
IS
l_hours_worked NUMBER;
l_to_return NUMBER;
BEGIN
l_hours_worked := TO_NUMBER(NVL(:ATX_CLOCK_IN,'0'));
IF (MOD((l_hours_worked - 0.02),0.25) = 0) THEN
l_to_return := TRUNC((l_hours_worked - 0.02) * 4) / 4;
ELSE
l_to_return := TRUNC((l_hours_worked + 0.23) * 4) / 4;
END IF;
RETURN (l_to_return);
EXCEPTION
WHEN VALUE_ERROR THEN
RAISE_APPLICATION_ERROR ( -20100
, 'ERROR, Cannot represent '
|| :ATX_CLOCK_IN
|| ' as a number.');
END CLOCK_INFormula;?
This function assumes :ATX_CLOCK_IN is always positive.
T. -
Tap function doesn't work, recovered files in bin etc
Hi
I'm using Mac Book Pro 13' - Mac OS 10.6.8
1) Every time, I switched on my laptop, the one finger (tap to click) function doesn't work (although I have set it up).
I have to go to 'systems preferences' to set it up again.
2) Why is there 'Recovered files' in the trash bin each I switched on my laptop? How to get rid of it?
3) Sometimes when I work using Word 2011, it takes a long time to save (the little icon will be swirling and swirling) and then I had to force quit and lose unsaved info. Why does this happen and how to avoid it from happening?
Pls help me. I'm in the middle of my thesis submission and urgently need solutions to my Mac problems. Thanks!Reinstall Photoshop. That often fixes the issue.
-
Preview function doesn't work in Cap2
I just installed Captivate2. In the project I'm working on,
the Preview function doesn't work. Or rather, it works
sporadically... sometimes it does, and --- much more often -- it
does not. What happens instead is, the "generating slides" message
appears, and the progress-bar begins, but then suddenly the
message/progress window disappears, WITHOUT generating the swf file
and without doing any kind of preview. It happens on all the
various options of the Preview function.
It does work about one time in every ten attempts.
This surely isn't acceptable... Anyone else encountering
this???Hi UncleErnie
By chance have you fiddled with the slide properties of any
of the slides? One of the new options available in version 2 is to
apply navigation options that cause slides to behave certain ways.
So it stands to reason that if a slide was configured to jump to
the end of the movie and the end of the movie option was to close
the movie... Well, hopefully you see what I mean.
Another question I would have is where are you editing your
project? Are you possibly saving it to the company LAN and editing
it using Captivate to make edits while in that location? If so,
this is normally bad practice. Try moving the project locally and
see if the issue resolves.
Cheers... Rick -
Error: wireless media transfer doesn't work
Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?
Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!! I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo
-
Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...
drag the other clip 'over' the main clip
the 2nd clip has to be selected/yellow border...
then you're prompted in the Inspector with the several options... -
Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on
Hello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
OlliHello,
the Snapshot function doesn't works in APEX 9.3.2, if the Aero Design is turned on. Once you click on tools > Snapshot > raster, the window where the displayed 3D model will be white.
The same happens when you click on the taskbar.
There one other option than to turn off the Aero Design?
System:
OS: Windows 7 32bit
APEX 9.3.2
nvidia Quattro NVS160
4GB RAM
Dell Latitude E6400
Thanks,
Olli
Maybe you are looking for
-
MacBook Pro iphoto external HDD and can't open iphoto.
I have a Macbook Pro OS X 10.9.2 and I cannot open iphoto. My HD has 0 kb free. Is this why? It worked yesterday and I haven't uploaded anything new, just attached a WD my passport ext HD and did a time machine back up. I can't locate the Iphoto back
-
Flash Video Controls Not Showing in Page
Have DWCS3 on XP I have a flash video file that was created with controls. There seems to be a checkbox for controls in Dreamweaver...BUT...when I play the video locally or on the server...the controls are absent. Did a search...What am I missing Tha
-
How to combine multiple signals to one waveform plot in labview
hi everyone, im using labview 2011 and i need to take four different signals and plot them individual in one waveform chart and THEN i need to combine all four signals and plot the resultant in the SAME waveform chart as the four original ones. i hav
-
How to cut and paste multiple items
How can you cut and paste multiple items on the clipboard?
-
How do I find my photos on my external hard drive backed up using Time Machine?
How do I find my photos on my external hard drive backed up using Time Machine? My hard drive died so this is my only storage. The hard drive was from an early 2008 Macbook Pro. I had recently installed Snow Leopard.