PL/SQL: ORA-00934: group function is not allowed here
Hi,
I am writing a PL/SQL procedure. The structure is like :
SET SERVEROUTPUT ON;
CREATE OR REPLACE Procedure abc
IS
v_total_ip_rec number(14);
v_total_op_rec number(14);
v_total_rec number(14);
BEGIN
SELECT SUM (CASE
WHEN <condition 1>
THEN 1
ELSE 0
END
) into v_total_ip_rec,
SUM (CASE
WHEN <condition 2>
THEN 1
ELSE 0
END
) into v_total_op_rec,
SUM (1) into v_total_rec
FROM A,B
WHERE A.Col1=B.Col1;
EXCEPTION
WHEN OTHERS THEN
raise_application_error(-20001,'An error was encountered - '||SQLCODE||' -ERROR- '||SQLERRM);
END;
When I run this procedure it gives me following error:
"PL/SQL: ORA-00934: group function is not allowed here"
Anybody have any idea?
Any help would be appreciated.
Thanks.
Hi Arunkumar ,
I think you don't need subquery.
Regards Salim.
Or.
SELECT COUNT (CASE
WHEN <condition 1>
THEN 1
END) v_total_ip_rec,
COUNT (CASE
WHEN <condition 2>
THEN 1
END) v_total_op_rec,
COUNT (1) v_total_rec
FROM a, b
WHERE a.col1 = b.col1
Similar Messages
-
ORA-00934: group function is not allowed here
Hi,
My requirement is to check oi.quantity is equal to sum of packing_detail. quantity
by order_number
select oi.quantity_ordered oi_qu, pd.quantity pq
from ordered_items oi, packing_details pd
where oi.ordered_item_id = pd.ordered_item_id
and oi.quantity_ordered = sum(pd.quantity)
and oi.order_number = '29';
after executing above query I get error
SQL Error: ORA-00934: group function is not allowed here
00934. 00000 - "group function is not allowed here"
Please tell me how to resolve it.
Thanks in advance
SandyYou have to make use of a subquery;
select oi.quantity_ordered oi_qu, pd.quantity pq
from ordered_items oi, packing_details pd
where oi.ordered_item_id = pd.ordered_item_id
and oi.quantity_ordered = *(select sum(pd.quantity) from packing_details pd1 group by pd1.ordered_item_id)*
and oi.order_number = '29'; This is based on the assumption that ordered_items is the summarize data and packing_details are the line item level data.
regards,
Dipankar. -
ORA-00934: group function is not allowed here Error - On validation screen
Can anyone help me with this funtion Returning boolean PL/SQL expression
begin
select max(sim_trip.finish_time) into finish_time,
max(sim_trip.start_time) into start_time from sim_trip
WHERE ((sim_trip.operator_counter = :P500_operator_counter));
if (:P500_start_time > finish_time)
then return true;
else
return false;
end if;
end;Lucy,
begin
select max(sim_trip.finish_time) into finish_time,
max(sim_trip.start_time) into start_time from sim_trip
WHERE ((sim_trip.operator_counter = :P500_operator_counter));
if (:P500_start_time > finish_time)
then return true;
else
return false;
end if;
end;Your select statement is wrong. It should be:
begin
select max(sim_trip.finish_time),max(sim_trip.start_time)
into :P500_start_time,:P500_finsh_time
from sim_trip
WHERE ((sim_trip.operator_counter = :P500_operator_counter));
if (:P500_start_time > :P500_finish_time)
then return true;
else
return false;
end if;
end;Robert
http://apexjscss.blogspot.com -
PL/SQL equivalent of T-SQL - "group function is not allowed here"
Hi all, hope someone can give me a hand as I'm pretty stuck! I have been trying to convert some MS SQL Server T-SQL statements into Oracle PL/SQL and am stuck on the below one:
SELECT
CA.AssessmentID,
(SELECT ProductName + ISNULL(' - ' + PrincipalBenefit,'')
FROM rptPolicySnapshot WHERE PolicyID = MAX(CA.PolicyID)
AND SnapshotID = 1),
MAX(CA.PolicyID)
FROM rptClaimInvoiceLineSnapshot CIL
INNER JOIN rptClaimAssessmentSnapshot CA
ON CIL.AssessmentID = CA.AssessmentID
AND CIL.SnapshotID = CA.SnapshotID
WHERE CIL.SnapshotID = 1
GROUP BY CA.AssessmentID
This works fine in MSSQL but returns the below error in Oracle:
'ORA-00934: group function is not allowed here'
If I take out the subquery the query works fine.
Any ideas as to the syntax? I am new to Oracle so not sure as to how I should go about writing this.
Thanks in advance!
LeoWITH x AS (SELECT ca.assessmentid,
MAX (ca.policyid) policy_id
FROM rptclaiminvoicelinesnapshot cil
INNER JOIN rptclaimassessmentsnapshot ca
ON cil.assessmentid = ca.assessmentid
AND cil.snapshotid = ca.snapshotid
WHERE cil.snapshotid = 1
GROUP BY ca.assessmentid
SELECT x.assessment_id,
x.policy_id,
productname + decode(principalbenefit,null,null,' - ' || principalbenefit ) prodname
FROM rptpolicysnapshot, x
WHERE policyid = x.policy_id
AND snapshotid = 1I think that's in the neighbourhood. -
Group function is not allowed here
Hi,
I have a problem running the following sql command, i know the error is over the count function, but i don't know how to solve this. Can you please help me solve this.
( i would like to select titles that have more than 2 authors.)
select distinct titles.title_id, titles.title_name, titles.publisher_ID
from authors, titles, author_titles
where titles.title_ID= author_titles.title_id
and author_titles.au_id = authors.au_id and count(authors) > 2
ORDER BY titles.title_id DESC ;
thank YoySorry i'm new to databases....
I tried to add the group by function ... but i still get errors
select distinct titles.title_id, titles.title_name, titles.publisher_ID
from authors, titles, author_titles
where titles.title_ID= author_titles.title_id
and author_titles.au_id = authors.au_id
group by titles.title_id
having count(authors.au_id) > 2
ORDER BY titles.title_id DESC ;
error
select distinct titles.title_id, titles.title_name, titles.publisher_ID
ERROR at line 1:
ORA-00979: not a GROUP BY expression
* >>> on titles.title_name -
Group function is not allowed here - where statement
I have a select that is basically:
select a,b,
sum(c),sum(d),
sum(c) - sum(d)
from A
group by a, b
I would like to add:
where sum(c) - sum(d) <> 0
I know that I can't use the sum function in the where statement.
Any ideas how I can get around it?
Thanks.
LeahHi ,
for instance ... using the count aggregate function... which is the same as using sum function.....
SQL> select job , cnt_emp , cnt_sal
2 from
3 (
4 select job, count(empno) cnt_emp, count(sal) cnt_sal
5 from emp
6 group by job
7 )
8 where cnt_emp- cnt_sal=0
9 /
JOB CNT_EMP CNT_SAL
CLERK 5 5
SALESMAN 5 5
PRESIDENT 1 1
MANAGER 3 3
ANALYST 2 2Greetings.... -
Error: Group Function Is Not Allowed Here
Post Author: simiora
CA Forum: WebIntelligence Reporting
Hi,
Created a measure in the Universe, which is based on a BO built-in function "PERCENTILE".
When this measure is in the WebI report, this field is also added to the GROUP BY caluse of the select statement, which will give the above error.
Is measure defined wrong? How to eliminate a field from the GROUP BY clause. We are using Oracle database and BOXI Rel 2.
Thanks.Lucy,
begin
select max(sim_trip.finish_time) into finish_time,
max(sim_trip.start_time) into start_time from sim_trip
WHERE ((sim_trip.operator_counter = :P500_operator_counter));
if (:P500_start_time > finish_time)
then return true;
else
return false;
end if;
end;Your select statement is wrong. It should be:
begin
select max(sim_trip.finish_time),max(sim_trip.start_time)
into :P500_start_time,:P500_finsh_time
from sim_trip
WHERE ((sim_trip.operator_counter = :P500_operator_counter));
if (:P500_start_time > :P500_finish_time)
then return true;
else
return false;
end if;
end;Robert
http://apexjscss.blogspot.com -
Getting Group Function is not Allowed
Hello All....
When I run the following in the SQL command screen it works fine... But when I try to use it in APEX to populate page values, it gives me the error...
ERROR
1 error has occurred
ORA-06550: line 25, column 74: PL/SQL: ORA-00934: group function is not allowed here ORA-06550: line 24, column 1: PL/SQL: SQL Statement ignored
CODE THAT WORKS IN SQL COMMAND SCREEN
SELECT
SUM(CASE WHEN SLOT = 'Q' THEN '1' ELSE '0' END) AS C_SLOT,
SUM(CASE WHEN TEST = 'P' THEN '1' ELSE '0' END) AS C_TEST,
FROM TBL_REC;
CODE THAT GIVES ERROR ON APPLICATION EXPRESS PAGE
SELECT
SUM(CASE WHEN SLOT = 'Q' THEN '1' ELSE '0' END) INTO :P2_C_SLOT,
SUM(CASE WHEN TEST = 'P' THEN '1' ELSE '0' END) INTO :P2_C_TEST,
FROM TBL_REC;
The colums SLOT and TEST have letter codes, I just want it to count just when it matches a certain letter. In the SQL Command Screen, it is returning one row, with the counts, everything is fine. It is only a problem when I try to use it anywere on a page in Application Express.
The full version has about 20 lines that are all sum lines, but I can not even get the 2 line ver above to work.
Any thoughts?This will work .. the into clause goes after the select columns ... into var1 ,var2 etc ..
SELECT SUM(CASE
WHEN SLOT = 'Q' THEN
'1'
ELSE
'0'
END),
SUM(CASE
WHEN TEST = 'P' THEN
'1'
ELSE
'0'
END)
INTO :P2_C_SLOT, :P2_C_TEST,
FROM TBL_REC;SS -
I met ORA-00935 group function is nested too deeply Message.
Hi all,
I made a table like below,
==============================
CREATE TABLE ser_1m_det (
time TIMESTAMP,
proto NUMBER(3,0),
port NUMBER(5,0),
pkts NUMBER(17,0),
vol_m NUMBER(17,4)
====================================
Then I want to use below SQL
====================================
SELECT proto, port, SUM(pkts) pkts, SUM(vol_m) vol_m
FROM ser_1m_det
GROUP BY (proto, port)
HAVING time < SYSTIMESTAMP AND ROWNUM<10
ORDER BY SUM(pkts);
====================================
When I execute upper sql, I met this error message;
===================================
ORDER BY SUM(pkts)
ORA-00935 group function is nested too deeply
===================================
Then I search what this message mean.
====================================
ORA-00935 group function is nested too deeply
Cause: This is an internal error message not usually issued.
Action: Contact Oracle Support Services.
====================================
I install Oracle9iAS Infrastructure 9.0.2.0.0 on WIN2000.
(I am using DBMS in Oracle9iAS @.@)
-> DBMS version is Oracle9i Enterprise Edition Release 9.0.1.3.1
Anybody know why I met upper error message?
Thanks in advance.well,
first you want to group,
then you want to order,
and most probably then you are interested in the N top records.
I had a try on table USER_OBJECTS to make things easier:
select * from
(select
object_type
,status
,nvl(oi ,0) oi
,nvl(doi,0) doi
from
( select
object_type
,status
,sum(object_id) oi
,sum(data_object_id) doi
from
user_objects
where
created between sysdate -1000 and sysdate
group by
object_type
,status
) A
order by
oi desc
) B
where rownum < 5
; -
ORA-04044: procedure, function, package, or type is not allowed here
Hi,
I am trying to build an object hierarchy.The object hirarcy is for a multi division, multi department, multi cost center and multi operation Organisation.Multiple department can store into multiple divisions, multiple cost center can store into multiple departments, multiple operations can store into multiple cost centers.
The structure I try to built like this:
create type div_obj_new as object
(id number,
divdesc varchar2(100)
create type div_obj_tab as
table of div_obj_new
create type dept_obj_new as object
(id number,
deptdesc varchar2(100),
dept_div number
create type dept_obj_tab as
table of dept_obj_new
create type cctr_obj_new as object
(id number,
cctrdesc varchar2(100),
cctr_dept number
create type cctr_obj_tab as
table of cctr_obj_new
create type oper_obj_new as object
(id number,
operdesc varchar2(100),
oper_cctr number
create type oper_obj_tab as
table of oper_obj_new
==========================
create type div_obj_type as object
(divid div_obj_tab)
NOT FINAL
create type dept_obj_type under div_obj_type
(deptid dept_obj_tab)
NOT FINAL
create type cctr_obj_type under dept_obj_type
(cctrid cctr_obj_tab)
NOT FINAL
create type oper_obj_type under cctr_obj_type
(operid oper_obj_tab)
NOT FINAL
=======This Table creation is not working=================
create table organisation
(div div_obj_type,
dept dept_obj_type,
cctr cctr_obj_type,
oper oper_obj_type)
nested table div store as division_table
nested table dept store as department_table
nested table cctr store as costcntr_table
nested table oper store as operation_table
nested table oper store as operation_table
ERROR at line 9:
ORA-22912: specified column or attribute is not a nested table type
=========================================================
Then I try to insert record into the div_obj_type instead of organisation table as it was not working.
The insert script is as follows:
===================================
insert into div_obj_type values
div_obj_tab
(div_obj_new(01,'Division 01'),
div_obj_new(02,'Division 02'),
div_obj_new(03,'Division 03'),
div_obj_new(04,'Division 04')
dept_obj_tab
dept_obj_new(10,'Department 10',1),
dept_obj_new(11,'Department 11',1),
dept_obj_new(12,'Department 12',2),
dept_obj_new(13,'Department 13',3),
dept_obj_new(14,'Department 14',4),
dept_obj_new(15,'Department 15',5),
dept_obj_new(16,'Department 16',6),
dept_obj_new(17,'Department 17',7)
cctr_obj_tab
cctr_obj_new(100,'Cost Center 100',10),
cctr_obj_new(101,'Cost Center 101',11),
cctr_obj_new(100,'Cost Center 102',12),
cctr_obj_new(100,'Cost Center 103',13),
cctr_obj_new(100,'Cost Center 104',14),
cctr_obj_new(100,'Cost Center 105',15),
cctr_obj_new(100,'Cost Center 106',16),
cctr_obj_new(100,'Cost Center 107',17),
cctr_obj_new(100,'Cost Center 108',10),
cctr_obj_new(100,'Cost Center 109',11),
cctr_obj_new(100,'Cost Center 110',12)
oper_obj_tab
oper_obj_new(1000,'Operation 1000',100),
oper_obj_new(1000,'Operation 1001',101),
oper_obj_new(1000,'Operation 1002',102),
oper_obj_new(1000,'Operation 1003',103),
oper_obj_new(1000,'Operation 1004',104),
oper_obj_new(1000,'Operation 1005',105),
oper_obj_new(1000,'Operation 1006',106),
oper_obj_new(1000,'Operation 1007',107),
oper_obj_new(1000,'Operation 1008',108),
oper_obj_new(1000,'Operation 1009',109),
oper_obj_new(1000,'Operation 1010',110),
oper_obj_new(1000,'Operation 1011',101),
oper_obj_new(1000,'Operation 1012',102),
oper_obj_new(1000,'Operation 1013',103),
oper_obj_new(1000,'Operation 1014',104),
oper_obj_new(1000,'Operation 1015',105),
oper_obj_new(1000,'Operation 1016',106),
oper_obj_new(1000,'Operation 1017',107),
oper_obj_new(1000,'Operation 1018',108)
insert into div_obj_type values
ERROR at line 1:
ORA-04044: procedure, function, package, or type is not allowed here
Actually I want to create an object view or object table with all the details of division, department , cost center and operation and it will store depending upon the respective upper level hirarcy 's id.For eg. department details can be fetched through division id etc..
So I can't figure out what to do for this kind of structure and how to do that.
I am running Oracle Release 2 (9.2.0.1.0) for Windows 2000.
Any help , advice or suggestions will be appreciated.
Thanks & Regards
NiharHi Cameron,
Thanks for your great suggestion.Actually what you have suggested is correct and it was tested by me correctly.But actually I want to store records in the multiple objects hirarcy depending upon the respective upper level hirarcy 's id.For say how can I retrive all records related to divisionID which is in the top level hirarchy? So by selecting divisionID=01, how can I easily select all depts,cost centers and Operation details?
Again I have another problem , when try to retrive record using PL/SQL I got some problem.
Structure as created above.Again I am giving here.
create type div_obj_new as object
(id number,
divdesc varchar2(100)
create type div_obj_tab as
table of div_obj_new
create type dept_obj_new as object
(id number,
deptdesc varchar2(100),
dept_div number
create type dept_obj_tab as
table of dept_obj_new
create type cctr_obj_new as object
(id number,
cctrdesc varchar2(100),
cctr_dept number
create type cctr_obj_tab as
table of cctr_obj_new
create type oper_obj_new as object
(id number,
operdesc varchar2(100),
oper_cctr number
create type oper_obj_tab as
table of oper_obj_new
create table organisation
(div div_obj_tab,
dept dept_obj_tab,
cctr cctr_obj_tab,
oper oper_obj_tab)
nested table div store as division_table
nested table dept store as department_table
nested table cctr store as costcntr_table
nested table oper store as operation_table
insert into organisation values
div_obj_tab
(div_obj_new(01,'Division 01'),
div_obj_new(02,'Division 02'),
div_obj_new(03,'Division 03'),
div_obj_new(04,'Division 04')
dept_obj_tab
dept_obj_new(10,'Department 10',1),
dept_obj_new(11,'Department 11',1),
dept_obj_new(12,'Department 12',2),
dept_obj_new(13,'Department 13',3),
dept_obj_new(14,'Department 14',4),
dept_obj_new(15,'Department 15',5),
dept_obj_new(16,'Department 16',6),
dept_obj_new(17,'Department 17',7)
cctr_obj_tab
cctr_obj_new(100,'Cost Center 100',10),
cctr_obj_new(101,'Cost Center 101',11),
cctr_obj_new(100,'Cost Center 102',12),
cctr_obj_new(100,'Cost Center 103',13),
cctr_obj_new(100,'Cost Center 104',14),
cctr_obj_new(100,'Cost Center 105',15),
cctr_obj_new(100,'Cost Center 106',16),
cctr_obj_new(100,'Cost Center 107',17),
cctr_obj_new(100,'Cost Center 108',10),
cctr_obj_new(100,'Cost Center 109',11),
cctr_obj_new(100,'Cost Center 110',12)
oper_obj_tab
oper_obj_new(1000,'Operation 1000',100),
oper_obj_new(1000,'Operation 1001',101),
oper_obj_new(1000,'Operation 1002',102),
oper_obj_new(1000,'Operation 1003',103),
oper_obj_new(1000,'Operation 1004',104),
oper_obj_new(1000,'Operation 1005',105),
oper_obj_new(1000,'Operation 1006',106),
oper_obj_new(1000,'Operation 1007',107),
oper_obj_new(1000,'Operation 1008',108),
oper_obj_new(1000,'Operation 1009',109),
oper_obj_new(1000,'Operation 1010',110),
oper_obj_new(1000,'Operation 1011',101),
oper_obj_new(1000,'Operation 1012',102),
oper_obj_new(1000,'Operation 1013',103),
oper_obj_new(1000,'Operation 1014',104),
oper_obj_new(1000,'Operation 1015',105),
oper_obj_new(1000,'Operation 1016',106),
oper_obj_new(1000,'Operation 1017',107),
oper_obj_new(1000,'Operation 1018',108)
===============
declare
div number;
divdesc varchar2(100);
divdetails varchar2(100);
dept number;
deptdesc varchar2(100);
deptdetails varchar2(100);
cctr number;
cctrdesc varchar2(100);
cctrdetails varchar2(100);
oper number;
operdesc varchar2(100);
operdetails varchar2(100);
cursor c_div is
select d.id , d.divdesc from table(select div from organisation) d
where d.id=1;
--union
cursor c_dept is
select dp.id , dp.deptdesc "Dept Details" from table(select dept from organisation) dp
where dp.dept_div=1;
--union
cursor c_cctr is
select cc.id , cc.cctrdesc "Cctr Details" from table(select cctr from organisation ) cc
where cc.cctr_dept=10;
--union
cursor c_oper is
select op.id , op.operdesc "Oper Details" from table(select oper from organisation) op
where op.oper_cctr=100;
TYPE oper_type IS RECORD
(oper_no NUMBER,
oper_desc VARCHAR(50));
TYPE cctr_type IS RECORD
(cctr_no NUMBER,
cctr_desc VARCHAR(50),
oper_detl oper_type);
TYPE dept_type IS RECORD
(dept_no NUMBER,
dept_desc VARCHAR(50),
cctr_detl cctr_type);
TYPE div_type IS RECORD
(div_no NUMBER,
div_desc VARCHAR2(50),
dept_detl dept_type);
division_rec div_type;
begin
for i_div in c_div%rowcount
loop
exit when c_div%notfound;
division_rec.div_no:=i_div.id;
division_rec.div_desc:=i_div.divdesc;
dbms_output.put_line('Division details = ' || division_rec.div_no || division_rec.div_desc);
--end loop;
for i_dept in c_dept%rowcount
loop
exit when c_dept%notfound;
select dp.id , dp.deptdesc ,
into
division_rec.dept_detl.dept_no, division_rec.dept_detl.dept_desc
from
table(select dept from organisation) dp
where dp.dept_div=division_rec.div_no;
-- division_rec.dept_detl.dept_no:=c_dept.id;
-- division_rec.dept_detl.dept_desc:=c_dept.deptdesc;
dbms_output.put_line('Department details = ' || division_rec.dept_detl.dept_no ||
division_rec.dept_detl.dept_desc);
--end loop;
for i_cctr in c_cctr
loop
exit when c_cctr%notfound;
select cc.id , cc.cctrdesc
into
division_rec.dept_detl.cctr_detl.cctr_no ,
division_rec.dept==_detl.cctr_detl.cctr_desc
from
table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;
-- division_rec.dept_detl.cctr_detl.cctr_no:=c_cctr.id;
-- division_rec.dept_detl.cctr_detl.cctr_desc:=c_cctr.cctrdesc;
dbms_output.put_line('Cost Center details = ' || division_rec.dept_detl.cctr_detl.cctr_no ||
division_rec.dept_detl.cctr_detl.cctr_desc);
--end loop;
for i_oper in c_oper%rowcount
loop
exit when c_oper%notfound;
select op.id , op.operdesc
into
division_rec.dept_detl.cctr_detl.oper_detl.oper_no,
division_rec.dept_detl.cctr_detl.oper_detal.oper_desc
from
table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_no:=c_oper.id;
-- division_rec.dept_detl.cctr_detl.oper_detal.oper_desc:=c_oper.operdesc;
dbms_output.put_line('Operation details = ' ||
division_rec.dept_detl.cctr_detl.oper_detl.oper_no ||
division_rec.dept_detl.cctr_detl.oper_detal.oper_desc);
end loop;
end loop;
end loop;
end loop;
end;
for i_div in c_div%rowcount
ERROR at line 46:
ORA-06550: line 46, column 14:
PLS-00999: implementation restriction (may be temporary)
ORA-06550: line 46, column 1:
PL/SQL: Statement ignored
New version of PL/SQL bloc
==============================
declare
div number;
divdesc varchar2(100);
divdetails varchar2(100);
dept number;
deptdesc varchar2(100);
deptdetails varchar2(100);
cctr number;
cctrdesc varchar2(100);
cctrdetails varchar2(100);
oper number;
operdesc varchar2(100);
operdetails varchar2(100);
cnt_div number;
cnt_dept number;
cnt_cctr number;
cnt_oper number;
cursor c_div is
select d.id , d.divdesc from table(select div from organisation) d
where d.id=1;
--union
cursor c_dept is
select dp.id , dp.deptdesc from table(select dept from organisation) dp
where dp.dept_div=1;
--union
cursor c_cctr is
select cc.id , cc.cctrdesc from table(select cctr from organisation ) cc
where cc.cctr_dept=10;
--union
cursor c_oper is
select op.id , op.operdesc from table(select oper from organisation) op
where op.oper_cctr=100;
TYPE oper_type IS RECORD
(oper_no NUMBER,
oper_desc VARCHAR(50));
TYPE cctr_type IS RECORD
(cctr_no NUMBER,
cctr_desc VARCHAR(50),
oper_detl oper_type);
TYPE dept_type IS RECORD
(dept_no NUMBER,
dept_desc VARCHAR(50),
cctr_detl cctr_type);
TYPE div_type IS RECORD
(div_no NUMBER,
div_desc VARCHAR2(50),
dept_detl dept_type);
division_rec div_type;
begin
/*select count(*) into cnt_div from table(select div from organisation) d
where d.id=1;*/
for i_div in c_div
loop
exit when c_div%notfound;
division_rec.div_no:=i_div.id;
division_rec.div_desc:=i_div.divdesc;
dbms_output.put_line('Division details = ' || division_rec.div_no || division_rec.div_desc);
--end loop;
/*select count(*) into cnt_dept from table(select dept from organisation) dp
where dp.dept_div=i_div.id;*/
for i_dept in c_dept
loop
exit when c_dept%notfound;
select dp.id , dp.deptdesc
into
division_rec.dept_detl.dept_no, division_rec.dept_detl.dept_desc
from
table(select dept from organisation) dp
where dp.dept_div=division_rec.div_no;
-- division_rec.dept_detl.dept_no:=c_dept.id;
-- division_rec.dept_detl.dept_desc:=c_dept.deptdesc;
dbms_output.put_line('Department details = ' || division_rec.dept_detl.dept_no || division_rec.dept_detl.dept_desc);
--end loop;
/*select count(*) into cnt_cctr from table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;*/
for i_cctr in c_cctr
loop
exit when c_cctr%notfound;
select cc.id , cc.cctrdesc
into
division_rec.dept_detl.cctr_detl.cctr_no , division_rec.dept_detl.cctr_detl.cctr_desc
from
table(select cctr from organisation ) cc
where cc.cctr_dept=division_rec.dept_detl.dept_no;
-- division_rec.dept_detl.cctr_detl.cctr_no:=c_cctr.id;
-- division_rec.dept_detl.cctr_detl.cctr_desc:=c_cctr.cctrdesc;
dbms_output.put_line('Cost Center details = ' || division_rec.dept_detl.cctr_detl.cctr_no || division_rec.dept_detl.cctr_detl.cctr_desc);
--end loop;
/*select count(*) into c_oper from table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;*/
for i_oper in c_oper
loop
exit when c_oper%notfound;
select op.id , op.operdesc
into
division_rec.dept_detl.cctr_detl.oper_detl.oper_no, division_rec.dept_detl.cctr_detl.oper_detl.oper_desc
from
table(select oper from organisation) op
where op.oper_cctr=division_rec.dept_detl.cctr_detl.cctr_no;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_no:=c_oper.id;
-- division_rec.dept_detl.cctr_detl.oper_detl.oper_desc:=c_oper.operdesc;
dbms_output.put_line('Operation details = ' || division_rec.dept_detl.cctr_detl.oper_detl.oper_no || division_rec.dept_detl.cctr_detl.oper_detl.oper_desc);
end loop;
end loop;
end loop;
end loop;
end;
declare
ERROR at line 1:
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at line 64
I hope you might have the solutions.
Thanks & Regards
Nihar -
PL/SQL: ORA-00984: column not allowed here
I am Trying to compile this procedure, but i get error, could please anybody help me out.
Thanks.
SQL> create or replace procedure FOF_sport_setup(
2 v_model_cd in varchar2, -- model_cd used in many place
3 v_portfolio_name in varchar2, -- portfolio name
4 v_src_acct_nbr in varchar2, -- source account number for port
5 v_src_fund_nbr in varchar2, -- source fund number
6 v_fmr_fund_nbr in varchar2, -- fidelity fund number
7 v_src_cd in varchar2, -- source code
8 v_last_mod_id in varchar2 -- your corp id
9 )
10 as
11 v_new_portf_id number(12);
12
13 begin
14
15 select max(portf_id) into v_new_portf_id from portfolios;
16
17 insert into portfolios
18 (portf_id,
19 portf_cd,
20 portf_name,
21 portf_typ_cd,
22 inception_date,
23 sub_product_cd,
24 product_cd,
25 product_line_cd,
26 bus_line_cd,
27 dly_perf_restr_ind,
28 portf_mgr_id,
29 seed_acct_nbr,
30 use_epas_ind,
31 epas_drop_perf_ind,
32 src_acct_nbr,
33 src_fund_nbr,
34 fmr_fund_nbr,
35 src_cd,
36 last_mod_id,
37 last_mod_dt)
38 values
39 (new_portf_id,
40 v_model_cd,
41 v_portfolio_name,
42 "RETAIL",
43 v_inception_date,
44 "FREE",
45 "FREE",
46 "FREE",
47 "PAS",
48 "Yes",
49 3,
50 "31635C101",
51 "N",
52 "Y",
53 v_src_acct_nbr,
54 v_src_fund_nbr,
55 v_fmr_fund_nbr,
56 v_src_cd,
57 v_last_mod_id,
58 sysdate);
59
60 end;
61 /
Warning: Procedure created with compilation errors.
SQL> show errors procedure FOF_sport_setup
Errors for PROCEDURE FOF_SPORT_SETUP:
LINE/COL ERROR
17/2 PL/SQL: SQL Statement ignored
51/3 PL/SQL: ORA-00984: column not allowed here
SQL>create or replace procedure FOF_sport_setup(
v_model_cd in varchar2, -- model_cd used in many places for portf_id,
v_portfolio_name in varchar2, -- portfolio name
v_inception_date in varchar2,
v_src_acct_nbr in varchar2, -- source account number for portfolio table in sport db
v_src_fund_nbr in varchar2, -- source fund number
v_fmr_fund_nbr in varchar2, -- fidelity fund number
v_src_cd in varchar2, -- source code
v_last_mod_id in varchar2 -- your corp id
as
v_new_portf_id number(12);
begin
select max(portf_id) into v_new_portf_id from portfolios;
insert into portfolios
(portf_id,
portf_cd,
portf_name,
portf_typ_cd,
inception_date,
sub_product_cd,
product_cd,
product_line_cd,
bus_line_cd,
dly_perf_restr_ind,
portf_mgr_id,
seed_acct_nbr,
use_epas_ind,
epas_drop_perf_ind,
src_acct_nbr,
src_fund_nbr,
fmr_fund_nbr,
src_cd,
last_mod_id,
last_mod_dt)
values
(v_new_portf_id,
v_model_cd,
v_portfolio_name,
'RETAIL',
to_date('v_inception_date'),
'FREE',
'FREE',
'FREE',
'PAS',
'Yes',
3,
'31635C101',
'N',
'Y',
v_src_acct_nbr,
v_src_fund_nbr,
v_fmr_fund_nbr,
v_src_cd,
v_last_mod_id,
sysdate);
end;
=====================
The procedure got created without any errors, when i am trying to execute the procedure i am getting errors.
this is the parameters which i am passing:
exec FOF_sport_setup('01213', 'PAS International Fund of Funds', '2/15/2006', '01213', 'IFOFB', 'IFOFB', 'FPCMS', 'a382077')
SQL> exec FOF_sport_setup('01213', 'PAS International Fund of Funds', '2/15/2006', '01213', 'IFOFB',
'IFOFB', 'FPCMS', 'a382077')
BEGIN FOF_sport_setup('01213', 'PAS International Fund of Funds', '2/15/2006', '01213', 'IFOFB', 'IF
ERROR at line 1:
ORA-01858: a non-numeric character was found where a numeric was expected
ORA-06512: at "SPORT.FOF_SPORT_SETUP", line 15
ORA-06512: at line 1
===============
the description for the table is below
===========
SQL> desc portfolios
Name Null? Type
PORTF_ID NOT NULL NUMBER(25)
PORTF_CD VARCHAR2(10)
PORTF_NAME VARCHAR2(60)
STRATEGY_CD VARCHAR2(10)
CO_STOCK_LEV_CD VARCHAR2(10)
EFF_DATE DATE
PORTF_WEB_NAME VARCHAR2(60)
PORTF_TYP_CD VARCHAR2(10)
INCEPTION_DATE DATE
CLOSE_DATE DATE
SUB_PRODUCT_CD VARCHAR2(10)
PRODUCT_CD VARCHAR2(10)
PRODUCT_LINE_CD VARCHAR2(10)
BUS_LINE_CD VARCHAR2(10)
BUS_GRP_CD VARCHAR2(10)
PLAN_CD VARCHAR2(10)
ADVISOR_CD VARCHAR2(10)
RISK_LEVEL_CD VARCHAR2(10)
DLY_PERF_RESTR_IND VARCHAR2(3)
SUB_PORTF_IND CHAR(1)
PORTF_MGR_ID NUMBER(25)
SEED_ACCT_NBR VARCHAR2(9)
OBJECTIVE VARCHAR2(255)
PORTF_COMPOSITION_DESC VARCHAR2(50)
LGL_GRP VARCHAR2(30)
USE_EPAS_IND VARCHAR2(3)
EPAS_MODEL_NAME VARCHAR2(50)
EPAS_DROP_PERF_IND VARCHAR2(3)
SRC_ACCT_NBR VARCHAR2(15)
SRC_FUND_NBR VARCHAR2(6)
FMR_FUND_NBR VARCHAR2(6)
NET_ASSETS NUMBER(25,8)
SEED_MKT_VAL NUMBER(25,10)
ACCT_MKT_VAL NUMBER(25,10)
TOTAL_ASSETS NUMBER(25,10)
NET_OTHER_ASSETS NUMBER(25,8)
ACCRUED_INCOME NUMBER(25,10)
ACCRUED_INTEREST NUMBER
LIABILITIES NUMBER(25,10)
SHARES_OUTSTANDING NUMBER(25,10)
PRINCIPAL_CASH NUMBER(25,10)
INCOME_CASH NUMBER(25,10)
INVESTIBLE_CASH NUMBER(25,10)
SHIP_DATE DATE
REBALANCE_IND CHAR(1)
OUTBOUND_IND VARCHAR2(5)
LGL_MSG_CD CHAR(1)
LAST_SETTLE_DATE DATE
LAST_TRD_DATE DATE
LAST_ALLOC_DATE DATE
STATUS_CD CHAR(1)
SRC_CD NOT NULL VARCHAR2(5)
LAST_MOD_ID NOT NULL VARCHAR2(10)
LAST_MOD_DT NOT NULL DATE
PORTF_MGD_CD VARCHAR2(10)
========== -
Getting an error - group function not allowed here
Below is the merge statement...
getting an error - group function not allowed here
WHY????
merge into summary
using
(select
a.user_id,
min(a.start_time_utc),
max(a.end_time_utc),
sum(a.duration_seconds),
/*total_upload
total_download
total_traffic,*/
max(r.package_id),
last_usage_charge, -------hard coded
max(r.peak_rate),
max(r.bst_plantype),
max(r.free_value), ---for free value
a.IsPeak,
sum(a.TotalDiscount)
from aaa_sessions a,rate_plan r,subscriber_info si
where
si.EXTERNAL_ID=a.USER_ID
and
si.PACKAGE_ID=r.PACKAGE_ID
group by
user_id,bst_plantype,ispeak)t ------do we need to use alias here
on
(summary.user_id=t.user_id
and
summary.type_of_summary=t.bst_plantype
and
summary.ispeak=t.ispeak)
When matched then
update
set
start_date =decode((t.start_time_utc-summary.start_date)-abs(t.start_time_utc-summary.start_date),0,summary.start_date,t.start_time_utc),
end_date=decode((t.end_time_utc-summary.end_date)-abs(t.end_time_utc-summary.end_date),0,t.end_time_utc,s.end_date),
total_duration=summary.total_duration+sum(duration_seconds),
total_upload=summary.total_upload+sum(upload_bytes),
total_download=summary.total_download+sum(download_bytes),
total_traffic=summary.total_upload+sum(upload_bytes)+summary.total_download+sum(download_bytes)
When not matched then
INSERT
(user_id ,
start_date,
end_date,
total_duration,
/*total_upload
total_download
total_traffic,*/
rate_plan_id,
last_usage_charge,
peak_rate,
type_of_summary,
IsPeak,
TotalDiscount)
VALUES
(t.user_id,
t.start_time_utc,
t.end_time_utc,
t.duration_seconds,
/*t.output_bytes,
t.input_bytes,
t.output_bytes+aa.input_bytes,*/
t.PACKAGE_ID,
1, ---hard coded the value
t.PEAK_RATE,
t.BST_PLANTYPE,
t.ispeak,
t.free_value);This is the query,...
Its giving no complilation errors..
I have not used aggregate functions in the insert/update..
have used only decode...
and nowhere i found that aggegate functions not allowed in the insert/update stmts of merge..
Can u please post a link where it is mentioned...
MERGE INTO summary
USING (SELECT a.user_id, MIN (a.start_time_utc) stc,
MAX (a.end_time_utc) etc, SUM (a.duration_seconds) ds,
SUM (a.download_bytes) download,
SUM (a.upload_bytes) upload, MAX (r.package_id) pkg_id,
MAX (r.peak_rate) p_rate, MAX (r.offpeak_rate)
ofp_rate,
MAX (r.bst_plantype) plan_type,
SUM (r.free_value) free_val, a.ispeak,
MAX (r.peak_pulse) p_pulse,
MAX (r.offpeak_pulse) ofp_pulse
FROM aaa_sessions a, rate_plan r, subscriber_info si
WHERE si.external_id = a.user_id
AND si.package_id = r.package_id
GROUP BY user_id, bst_plantype, ispeak) t
ON ( summary.user_id = t.user_id
AND summary.type_of_summary = t.plan_type
AND summary.rate_plan_id = t.pkg_id
AND summary.ispeak = t.ispeak)
WHEN MATCHED THEN
UPDATE
SET start_date =
DECODE ( (t.stc - summary.start_date)
- ABS (t.stc - summary.start_date),
0, summary.start_date,
t.stc
end_date =
DECODE ( (t.etc - summary.end_date)
- ABS (t.etc - summary.end_date),
0, t.etc,
summary.end_date
total_duration = summary.total_duration + t.ds,
total_download = summary.total_download + t.download,
total_upload = summary.total_upload + t.upload,
total_traffic =
summary.total_upload
+ t.upload
+ summary.total_download
+ t.download,
last_usage_charge =
DECODE (t.plan_type,
0, (t.ds - t.free_val)
/ DECODE (t.ispeak, 0, t.ofp_pulse, p_pulse)
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate),
((t.download + t.upload) - t.free_val
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate)
WHEN NOT MATCHED THEN
INSERT (user_id, start_date, end_date, total_duration,
total_download, total_upload, total_traffic, rate_plan_id,
last_usage_charge, peak_rate, type_of_summary, ispeak,
totaldiscount)
VALUES (t.user_id, t.stc, t.etc, t.ds, t.download, t.upload,
t.download + t.upload, t.pkg_id,
DECODE (t.plan_type,
0, (t.ds - t.free_val)
/ DECODE (t.ispeak, 0, t.ofp_pulse, p_pulse)
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate),
((t.download + t.upload) - t.free_val
* DECODE (t.ispeak, 0, t.ofp_rate, t.p_rate)
t.p_rate, t.plan_type, t.ispeak, t.free_val);
COMMIT; -
ORA-00976: Specified pseudocolumn or operator not allowed here
Hi,
After 11gR2 upgrade we got error in insert statement.
INSERT INTO SDE_TBL_FLEXTRIMSITROUT
(BRANCHCD,
SOURCECD,
CURRENTNO,
BATCHNO,
DEPTCD,
CCY,
INITIATIONDATE,
AMOUNT,
ACCOUNT,
ACCOUNTBRANCH,
TXNCD,
DEBITCREDIT,
LCYEQUIVALENT,
EXCHRATE,
VALUEDATE,
INSTRUMENTNO,
RELCUST,
ADDLTEXT,
TXNMIS1,
TXNMIS2,
TXNMIS3,
TXNMIS4,
TXNMIS5,
TXNMIS6,
TXNMIS7,
TXNMIS8,
TXNMIS9,
TXNMIS10,
COMPMIS1,
COMPMIS2,
COMPMIS3,
COMPMIS4,
COMPMIS5,
COMPMIS6,
COMPMIS7,
COMPMIS8,
COMPMIS9,
COMPMIS10,
COSTCODE1,
COSTCODE2,
COSTCODE3,
COSTCODE4,
COSTCODE5,
RELATEDACCOUNT,
RELATEDREF,
USERREFERENCE,
ACCTPOSTOVERWRITE,
EXCHRATEOVERWRITE,
VALUEDATEOVERWRITE,
ACCTBALOVERWRITE,
ITRREFER,
RefinanceAmount,
PROCESSID)
VALUES
(vBranchCode,
cCreateNewTrimsITR_rec.APPLSYS,
ROWNUM,
nBatchNo,
cCreateNewTrimsITR_rec.DEPT,
vCcy,
TO_DATE(cCreateNewTrimsITR_rec.TRANSDATE, 'YYYYMMDD'),
nAmount,
vAccount,
vAccountBranch, --added by subhashish
vTxnCd,
cDebitCredit,
nLcyEquivalent,
nExchRate,
TO_DATE(cCreateNewTrimsITR_rec.VALUEDATE, 'YYYYMMDD'),
vInstrumentNo,
--' ' || SUBSTR(cCreateNewTrimsITR_rec.ITRREFER,2,11),
vFlxCntry || cCreateNewTrimsITR_rec.APNO,
vDesc,
cCreateNewTrimsITR_rec.TRANSOUC,
RPAD(' ', 9),
vExpenseMIS,
vProductMIS,
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 9),
RPAD(' ', 20),
cCreateNewTrimsITR_rec.THEIRREF,
RPAD(' ', 16),
cActPostOverwrite,
cExchRateOverWrite,
cValueDateOverWrite,
cAcctBalOverWrite,
cCreateNewTrimsITR_rec.ITRREFER,
cCreateNewTrimsITR_rec.REFIAMOUNT,
nFlexOutProcessId);
Error : ORA-00976: Specified pseudocolumn or operator not allowed here
As per checking, found there is an issue in 11gR2 with insert query using rownum in values.
Do anyone know how to solve this issue ?If there is a bug here, then it is in 10g, not 11. Although it does insert a row, I don't think it does anything useful.
SQL> create table t (id number, descr varchar2(10));
Table created.
SQL> insert into t values (rownum, 'One');
1 row created.
SQL> select * from t;
ID DESCR
0 One
SQL> insert into t values (rownum, 'Two');
1 row created.
SQL> select * from t;
ID DESCR
0 One
SQL> commit;
Commit complete.
SQL> insert into t values (rownum, 'Three');
1 row created.
SQL> select * from t;
ID DESCR
0 One
0 Two
0 Three
John -
Outer Join problems - "ORA-30563 outer join operator (+) not allowed in select-list"
Products: Discoverer 4.1.33.0.2
(Admin and User/Plus)
8i EE 8.1.7 (Discoverer server)
8i EE 8.1.5 ('source data' server)
Background assumptions: (1) If a column from an "outer-joined" table is compared to a constant, the outer join operator must be applied to that column in order for the outer join to work. (2) A 'Condition' specified in Discoverer User/Plus manifests as a comparison to a constant.
I created a join in Admin between two folders, selected 'outer join on detail' option. In User/Plus, created worksheet containing columns from the joined folders. When no Conditions are NOT specified, results seem ok. However, when Condition IS added, worksheet encounters "ORA-30563 outer join operator (+) not allowed in select-list" and returns blank sheet.
To workaround, created Custom folder with outer join in place. Didn't work either with Conditions specified. No error, but I think that because Discoverer did not 'outer join' the Condition column, the outer join was ignored.
Any insights, ideas, or workarounds are much appreciated.
-JimIf you build a query that uses an outer join then any items from the potentially deficient side of the join will have (+) appended to them everywhere in the sql. Up until 8.1.7 this was OK in the select list as it was just treated as noise and ignored - However this now fails with ORA-30563:
outer join operator (+) not allowed in select-list...
In 4.1.33.1.6 you get the error 'ORA-30563 outer join operator(+) not allowed in select list'.
In 4.1.36.1.10 the query runs OK.. Your work around I would guess would be to create a custom folder as you suggested. -
ORA-01733- virtual column not allowed here - Insert using inline view
Does anyone know why I am getting ORA-01733- virtual column not allowed here
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
---no error without WITH CHECK option
SQL> INSERT INTO
2 (SELECT
3 location_id,
4 city,
5 l.country_id
6 FROM countries c, locations l,regions r
7 where l.country_id = c.country_id
8 and r.region_id=c.region_id
9 and r.region_name = 'Asia')
10 VALUES (5500, 'Wansdworth Common', 'UK');
1 row created.
SQL> rollback;
Rollback complete.
-----error with WITH CHECK OPTION
SQL> INSERT INTO
2 (SELECT
3 location_id,
4 city,
5 l.country_id
6 FROM countries c, locations l,regions r
7 where l.country_id = c.country_id
8 and r.region_id=c.region_id
9 and r.region_name = 'Asia' WITH CHECK OPTION)
10 VALUES (5500, 'Wansdworth Common', 'UK');
INSERT INTO
ERROR at line 1:
ORA-01733: virtual column not allowed here
I was expecting
ORA-01402: view WITH CHECK OPTION where-clause violation
for the second one. Is there anything I am missing here ?Randolf
Thank you very much for the update to this old question
After reading the link I think I should ignore this error and accept it as ORA-01402
The information you asked me to check did not lead me an understanding of different error types.
SQL> ----view for ORA-01733
SQL> create view test_v_1
2 as
3 SELECT
4 location_id,
5 city,
6 l.country_id
7 FROM countries c, locations l,regions r
8 where l.country_id = c.country_id
9 and r.region_id=c.region_id
10 and r.region_name = 'Asia' WITH CHECK OPTION;
View created.
SQL>
SQL>
SQL>
SQL> select * from user_updatable_columns where table_name='TEST_V_1';
OWNER TABLE_NAME COLUMN_NAME UPD INS DEL
HR TEST_V_1 CITY YES YES YES
HR TEST_V_1 COUNTRY_ID NO NO NO
HR TEST_V_1 LOCATION_ID YES YES YES
SQL>
SQL> ----view for ORA-01402
SQL>
SQL> create view test_v_2
2 as
3 SELECT
4 d.department_id,
5 d.department_name,
6 d.location_id
7 FROM hr.departments d,hr.locations l
8 WHERE l.location_id=d.location_id
9 and d.location_id < 2000
10 WITH CHECK OPTION;
View created.
SQL>
SQL> select * from user_updatable_columns where table_name='TEST_V_2';
OWNER TABLE_NAME COLUMN_NAME UPD INS DEL
HR TEST_V_2 DEPARTMENT_ID YES YES YES
HR TEST_V_2 DEPARTMENT_NAME YES YES YES
HR TEST_V_2 LOCATION_ID NO NO NO
SQL>
SQL>
SQL> ----INSERT STILL FAILING WITH DIFFERENT ERROR DESPITE THE SAME UPDATABLE COLUMN STRUCTURE
SQL> insert into test_v_1 values (5500, 'Wansdworth Common', 'UK');
insert into test_v_1 values (5500, 'Wansdworth Common', 'UK')
ERROR at line 1:
ORA-01733: virtual column not allowed here
SQL> insert into test_v_2 values (9999, 'Entertainment', 2500);
insert into test_v_2 values (9999, 'Entertainment', 2500)
ERROR at line 1:
ORA-01402: view WITH CHECK OPTION where-clause violation
SQL>A. Coskan GUNDOGAR
Oracle DBA
http://coskan.wordpress.com
“A man's errors are his portals of discovery.”
James Joyce
Maybe you are looking for
-
Recording from analogue cassette
Hi everybody! I'm a computer klutz and wish to record onto my computer from a tape casette, how do I go about it and what equipment do I need?
-
Firefox prints only every other page on a bulk print run, why?
I use Firefox to bulk print Ebay invoices. It's been just fine for years. But 2 days ago it started printing just every other page in full. Intervening pages had only the top 20% printed (headers and footers are set to blank), and it prints one extra
-
UnmarshalException with a difference
Hi all I have been getting rather stressed at this annoying exception: java.rmi.ServerException: Server RemoteException; nested exception is: java.rmi.UnMarshalException: error unmarshalling arguments; nested exception is: java.lang.ClassNotFoundExce
-
Lil' script to update adblockfilter, adblocking via /etc/hosts file
hi, i've recently changed to adblocking via the hosts file (which works great btw), but i was missing filtersetupdating like in firefox, so i've created with my limited scripting skills this one... # lil' script to update /etc/hosts adblock-filter #
-
If I do a "Get Info" on my hard drive, it says 230.2 GB used. If I select all of the content at the top level of the drive (8 folders), and do another Get Info (using Command + Option + I), the result is 222.6 GB. Where is the other 7.6 GB?