Place... Function LR5 where is it ?

Do I am searching wrong?
Where is the "Place ... " function that before was at file menu?
Thanks
Roberto

There is a "Place" menu item in Photoshop and Elements but NOT in Lightroom.

Similar Messages

Places function no longer works on iPhoto.

My Mac has OSX 10.6.8 and iPhoto 8.1.2. The Places function no longer works. I can select Places that I used on earlier photos, but it no longer locates new Places on the map. I have read other people's discussions of this problem on the web, but I am not technical and do not understand much of what they say. Any suggestions for a no-technical person would be welcome.

I have this same problem on my new MacBook Pro. The biggest problem is that the embedded Google will NOT find most things that Google Maps finds. For example, the Oberoi Amarvillas in Agra India.
I also can't move the pin for any of the places it already knows. I wonder if this might be related to trackpad settings? I can't find one that looks like it might help.
I can find locations using their map coordinates (for example, 27.168647, 78.049150) and then go back and rename the place to something more helpful. But I can't fine tune the size of the location, which makes it hard to have highly localized places. And it gets the name of the state wrong, which makes it hard to find locations by general location.
This puts a damper on processing photos right away, if I can't record them while I still remember their locations.

How do you make the 'places' function work in iphoto

`i have just imported a lot of old photos from my 2007 macbook onto a new macbook pro with ilife 09. `i am trying to make the places function work but can't get it to work. The 'i' icon does not appear in the bottom right hand corner of the events main photo as it's supposed too. Any suggestions?

Simply open an event; select 1 or more photos and select the i in the lower right corner of a photo thumbnail. You will get the Geocoding window. Start typing the address/place/country in the location area. For detailed addresses you select new place. You can resize the window. Maps from google appears and you select the place it finds. You can even drag the pin to a specific area. Press ok and your done.

Clarification on using function in where clause of oracle sql query

I have an issue in regarding function using where clause of sql query..
We are facing performance issue while executing query, so in what ways to improve the performance of the query which i have posted below.
select col ,case when my_function(parameter)
from tab1 a ,tab2 b,tabl3 c
where a.column1=b.column2
and b.column3 =c.column6
and my_function(parameter)>0
Regards
Dinesh
Edited by: wild fire on May 18, 2012 4:15 PM

Dinesh,
remind that when you use a function in the where clause it normally will get started for each record in the table.
So your answer is two-fold:
1. make the function only start when needed by adding a function based index on the table (this will make inserts and updates slower)
2. make the function faster by adding the DETERMINISTIC clause if possible. this will make Oracle "cache" the result of the function.
Regards,
Richard
blog: http://blog.warp11.nl
twitter: @rhjmartens
If this question is answered, please mark the thread as closed and assign points where earned..

Can't have aggregate function in WHERE clause clause

Dear all,
I've created object in BO XI 3.1 Designer with following criterias:
http://img4.imageshack.us/img4/833/20111201124314.th.jpg
It is a simple number - 1,2,3,4,5.
Now I need to use this object as a criteria for WHERE function in another object.
http://img607.imageshack.us/img607/1543/20111201124717.th.jpg
I receive an error "Can't have aggregate function in WHERE clause <clause>"
How can I overcome this?
P.S. I'm sorry in advance if such topic already exist - I didn't found one.
Edited by: Ashot Antonyan on Dec 1, 2011 9:50 AM
Edited by: Ashot Antonyan on Dec 1, 2011 9:51 AM

Hi,
You will have to use Sub query to achieve this. Give more details on what is available and what you need then i could help you out with the complete solution.
Thanks,
Ravichandra K

Help:alternate for calling function in where clause

Hi ,
In below query i'm calling function in where clause to avoid COMPLETE status records,due to this query taking 700 secs to return result.If i'm remove below function condition it's returning results with in 5 secs.Can you some one advice to any alternate idea for this?
WHERE mark_status != 'COMPLETE'
SELECT assessment_school,
subject,
subject_option,
lvl,
component,mark_status,
mark_status
NULL AS grade_status,
NULL AS sample_status,
:v_year,
:v_month,
:v_formated_date,
:v_type,
cand_lang
FROM
(SELECT assessment_school,
    subject,
    subject_option,
    lvl,
    programme,
    component,
    paper_code,
    cand_lang,
    mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) AS mark_status
FROM
    (SELECT DISTINCT ccr.assessment_school,
      ccr.subject,
      ccr.subject_option,
      ccr.lvl,
      ccr.programme,
      ccr.language AS cand_lang,
      ccr.paper_code,
      ccr.component
    FROM candidate_component_reg ccr
    WHERE ccr.split_session_year = :v_year
    AND ccr.split_session_month = :v_month
    AND EXISTS
      (SELECT 1
      FROM IBIS.subject_component sc
      WHERE sc.year          = ccr.split_session_year
      AND sc.month           = ccr.split_session_month
      AND sc.paper_code      = ccr.paper_code
      AND sc.assessment_type = 'INTERNAL'
      AND sc.subject_option NOT LIKE '%self taught%'
      AND sc.component NOT IN ('PERFORMANCE PRODUCTION','PRESENTATION WORK','REFLECTIVE PROJECT','SPECIAL SYLLABUS INT. ASSESSMENT')
    AND NVL(ccr.withdrawn,'N') = 'N'
    AND ccr.mark_status       != 'COMPLETE'
    AND EXISTS
      (SELECT 1
      FROM school s
      WHERE s.school_code   = ccr.assessment_school
      AND s.training_school = 'N'
WHERE mark_status != 'COMPLETE';

One thing you can test quickly is to put the function call in it's own select ...from dual.
This might make a difference.
However, only you can check this, I don't have your tables or data.
So, what happens if you use:
    paper_code,
    cand_lang,
(select mark_entry.get_ia_entry_status(:v_year, :v_month, assessment_school, subject_option, lvl, cand_lang, component, paper_code) from dual ) AS mark_status
FROM
    (SELECT DISTINCT ccr.assessment_school, --<< is the DISTINCT really needed?
      ccr.subject,
      ccr.subject_option,
...Also, try to find out the purpose of that above DISTINCT, is it really needed or is there some join missing?

Using round off function in where clause

Hi All,
I'm trying to use round off function in where clause, I seek help in completing this script.
WITH CR_Details AS
(Select
request_id,
parent_request_id,
fcpt.user_concurrent_program_name Request_Name, phase_code, status_code,
round((fcr.actual_completion_date - fcr.actual_start_date),3) * 24 * 60 as Run_Time,
round(avg(round(to_number(actual_start_date - fcr.requested_start_date),3) * 1440),2) wait_time,
fu.User_Name Requestor,
fcr.argument_text parameters,
to_char (fcr.requested_start_date, 'MM/DD HH24:mi:SS') requested_start,
to_char(actual_start_date, 'MM/DD/YY HH24:mi:SS') ACT_START,
to_char(actual_completion_date, 'MM/DD/YY HH24:mi:SS') ACT_COMP,
fcr.completion_text
From
apps.fnd_concurrent_requests fcr,
apps.fnd_concurrent_programs fcp,
apps.fnd_concurrent_programs_tl fcpt,
apps.fnd_user fu
Where 1=1
and fcr.concurrent_program_id = fcp.concurrent_program_id
and fcp.concurrent_program_id = fcpt.concurrent_program_id
and fcr.program_application_id = fcp.application_id
and fcp.application_id = fcpt.application_id
and fcr.requested_by = fu.user_id
and fcpt.language = 'US'
and fcr.actual_start_date like sysdate )
     select crd.*
     from CR_Details crd
     where Run_time <> '0'
     AND wait_time <> '0'
GROUP BY
crd.request_id,
crd.parent_request_id,
crd.fcpt.user_concurrent_program_name,
crd.requested_start_date,
crd.User_Name,
crd.argument_text,
crd.actual_completion_date,
crd.actual_start_date,
crd.phase_code,
crd.status_code,
crd.resubmit_interval,
crd.completion_text,
crd.resubmit_interval,
crd.resubmit_interval_unit_code,
crd.description
Not sure about the GROUPBY function referencing the "crd." .

Hi,
The best thing for you to do is start over. Start as small as possible, then take baby steps.
Pick one of the tables; fcr perhaps, and write a query that just uses that table, like this:
SELECT    *
FROM       apps.fnd_concurrent_requests     fcr
WHERE       fcr.actual_start_date          >= TRUNC (SYSDATE)
AND       fcr.actual_start_dt          < TRUNC (SYSDATE) + 1
;(I think this is what you meant to do when you said "... LIKE SYSDATE".)
Make sure this little query gets credible results. When that tiny query is working perfectly, add another line or two. You can cut and paste code from what you posted, if that helps you.
If you get stuck, post the last version of your code that worked perfectly, and the latest version (only a line or two bigger) that has the problem. Describe what the problem is. If you get an error, post the complete error message. In any event, post CREATE TABLE and INSERT statements for all the tables and columns needed to run the query, and the results you want to get from that query.
When you post any code, format it, so that how the code looks on the screen gives some clues about how it is working.
When you post any formatted text on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
If you going to use the AVG function in the sub-query, then you probably need to do a GROUP BY in the sub-query.
If you're not using any aggregate functions (like AVG) in the main query, then you probably don't want to do a GROUP BY in the main query.
I know this is a lot of work. I'm sorry. If there was an easier way, I wouldn't ask you to do all this.

My function in where clause? help me please.

hello friends, I need to call my function in where clause as dummy example below:
declare
name_ table1.name%type;
function return_id(id number) return number is
begin
return 1;
end return_id;
begin
select name into name_
from table1
where id = return_id(table1.id);
end;
raise exception: 'the function doesn't used in where clause'. why????

-- CREATING A FUNCTION AVAILABLE THROUGH A PACKAGE SPEC.
SQL> ed
Wrote file afiedt.buf
1 create package mypackage is
2    function myfunc(p_val NUMBER) RETURN NUMBER;
3* end;
SQL> /
Package created.
SQL> ed
Wrote file afiedt.buf
1 create or replace package body mypackage is
2    function myfunc(p_val NUMBER) RETURN NUMBER IS
3    begin
4      RETURN (p_val*p_val)-1;
5    end;
6* end;
SQL> /
Package body created.
SQL> declare
2    v_myval NUMBER := 2;
3 begin
4    select mypackage.myfunc(v_myval)
5    into   v_myval
6    from   dual;
7    dbms_output.put_line(v_myval);
8    select mypackage.myfunc(v_myval)
9    into   v_myval
10    from   dual;
11    dbms_output.put_line(v_myval);
12 end;
13 /
3
8
PL/SQL procedure successfully completed.
-- CREATING A STANDALONE DATABASE FUNCTION.
SQL> create or replace function myfunc2(p_val number) return number is
2 begin
3    return (p_val*2)+1;
4 end;
5 /
Function created.
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_myval NUMBER := 2;
3 begin
4    select myfunc2(v_myval)
5    into    v_myval
6    from dual;
7    dbms_output.put_line(v_myval);
8    select myfunc2(v_myval)
9    into    v_myval
10    from dual;
11    dbms_output.put_line(v_myval);
12* end;
SQL> /
5
11
PL/SQL procedure successfully completed.
-- CREATING A LOCAL FUNCTION IN THE ANONYMOUS PL/SQL BLOCK
SQL> ed
Wrote file afiedt.buf
1 declare
2    v_myval NUMBER := 2;
3    function myfunc3(p_val number) return number is
4    begin
5      return (p_val*p_val*p_val);
6    end;
7 begin
8    select myfunc3(v_myval)
9    into    v_myval
10    from dual;
11    dbms_output.put_line(v_myval);
12    select myfunc3(v_myval)
13    into    v_myval
14    from dual;
15    dbms_output.put_line(v_myval);
16* end;
SQL> /
select myfunc3(v_myval)
ERROR at line 8:
ORA-06550: line 8, column 10:
PLS-00231: function 'MYFUNC3' may not be used in SQL
ORA-06550: line 8, column 10:
PL/SQL: ORA-00904: : invalid identifier
ORA-06550: line 8, column 3:
PL/SQL: SQL Statement ignored
ORA-06550: line 12, column 10:
PLS-00231: function 'MYFUNC3' may not be used in SQL
ORA-06550: line 12, column 10:
PL/SQL: ORA-00904: : invalid identifier
ORA-06550: line 12, column 3:
PL/SQL: SQL Statement ignored
SQL>As you can see (and as previously mentioned by someone else) the function has to be available to the SQL engine either via a datavbase package or as a database function. If you declare the function locally within the anonymous PL/SQL block then the function only exists in the scope of that PL/SQL block and thus when your SQL statement is sent to the SQL engine for execution, the SQL engine can't see it.
;)

Using function in where clause

I have created a function as follows
create or replace FUNCTION get_codes RETURN varchar2 IS
scodes varchar2(50) := 'A1,A2';
BEGIN
scodes := '('''||REPLACE(scodes,',',''',''')||''')';
return scodes;
END;
this function returns ('A1','A2')
now i want to use this in where clause, both below statements fetches no rows
select * from tablea where code in (select get_codes from dual);
select * from tablea where code in get_codes;
but the following will fetch rows
select * from tablea where code in ('A1','A2')
how to use function in where clause
Thanks

Hi,
The code that works:
where code in ('A1','A2')is testing whther code is either of two 2-character strings, A1 or A2.
The ones that don't work, such as:
where code in get_codes;are comparing code to one 9-character string: 'A1','A2', where characters 1, 4, 6 and 9 are single-quotes. (The function can only return one value.)
You can use dynamic SQL to embed that 9-character string in part of your query, where it will be interpreted as two 2-character strrings.
[Oracle Base|http://www.oracle-base.com/articles/misc/DynamicInLists.php] and AskTom have good pages on the subject of dynamic IN-lists.
Of you can use INSTR or LIKE:
where INSTR ( get_codes
, '''' || code || ''''
) > 0

Case function in where clause

i insert the below rows in a table cash_book.
PRJ_CODE PRJ_NAME
1203 SHIFA
1203 SHIFA
1203 SHIFA
1202 FATIMA
1202 FATIMA
1203 SHIFA
if i select 1202 code then return 1202 code rows, if i select 1203 then returns 1203 code rows, if i select other than both values then returns all rows. how can i define in one query with use (case or decode function) in where clause ??

perhaps something like this:
create table test
as
select 1200 + rownum prj_code
from dual
connect by level <= 10;
select * from test;
PRJ_CODE
      1201
      1202
      1203
      1204
      1205
      1206
      1207
      1208
      1209
      1210
var v_PRJ_CODE number
exec :v_PRJ_CODE := 1200;
select *
from test
where PRJ_CODE = :v_PRJ_CODE
    or 1 = case when :v_PRJ_CODE in (1202, 1203) then 0 else 1 end;
PRJ_CODE
      1201
      1202
      1203
      1204
      1205
      1206
      1207
      1208
      1209
      1210
exec :v_PRJ_CODE := 1203;
select *
from test
where PRJ_CODE = :v_PRJ_CODE
    or 1 = case when :v_PRJ_CODE in (1202, 1203) then 0 else 1 end;
PRJ_CODE
      1203Regards
Martin

How can we use DECODE function in where clause.

Hi Guys,
I have to use DECODE function in where clause.
like below
select * from tab1,tab2
where a.tab1 = b.tab2
and decode(code, 'a','approved')
in this manner its not accepting?
Can any one help me on this or any other aproach?
Thanks
-LKR

>
I am looking for to decode the actual db value something in different for my report.
like if A then Accepted
elseif R then Rejected
elseif D then Denied
these conditions I have to check in where clause.
>
what are you trying to do?
may be you are looking for
select * from tab1,tab2
where a.tab1 = b.tab2
and
   (decode(:code, 'A','Accepted') = <table_column>
    or
    decode(:code, 'R','Rejected') = <table_column>
   or
    decode(:code, 'D','Denied') = <table_column>
   )

ABAP Function Module where-used in BI-Transformations

Hi,
we have developed some ABAP-Z-Function-Modules. These are used in several BI-Data-Transformations and work fine and performant.
The problem we have now is to find out in which transformation a Function-Module is used.
The where-used-list in SE37 doesn't report any BI-Transformations althought I check all categories.
Got anyone a solution for our problem?
Christian

Hi,
see this code for function module where used list only for transformation . i used the same code as bhaskar specified..but little modification..here u used "date_get_week" function module..
TYPE-POOLS slis.
DATA fcat1 TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF t_display OCCURS 0,
         targetname LIKE rstran-targetname,
         sourcename LIKE rstran-sourcename,
         tranid LIKE rstran-tranid,
         routine LIKE rstran-startroutine,
         line_no LIKE rsaabap-line_no,
         line LIKE rsaabap-line,
END OF t_display.
data : input(75) type c.
DATA : input_pattern1(75) TYPE c.
DATA : input_pattern2(75) TYPE c.
DATA : same_source(30) TYPE c.
**Internal table declerations**************************************
TYPES: BEGIN OF t_trans_lookup_finder,
         targetname TYPE rstran-targetname,
         sourcename TYPE rstran-sourcename,
         tranid TYPE rstran-tranid,
         routine TYPE rstran-startroutine,
         line_no TYPE rsaabap-line_no,
         line TYPE rsaabap-line,
END OF t_trans_lookup_finder.
DATA: i_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_lookup_finder TYPE t_trans_lookup_finder,
i_trans_lookup_finder TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_lookup_finder TYPE t_trans_lookup_finder,
i_trans_final TYPE STANDARD TABLE OF t_trans_lookup_finder,
wa_trans_final TYPE t_trans_lookup_finder.
DATA : i(7) TYPE n.
DATA old_cube(20) TYPE c VALUE ' '.
DATA old_source(20) TYPE c VALUE ' '.
**Selections for update rules**************************************
SELECT DISTINCT targetname    sourcename tranid        endroutine       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aendroutine = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
**Selections for Transformations(Expert routine)*******************
SELECT DISTINCT        targetname       sourcename       tranid       expert       line_no       line
       INTO TABLE i_trans_lookup_finder FROM
       rstran AS a INNER JOIN rsaabap AS b ON aexpert = bcodeid
                       WHERE
                       aobjvers = 'A' AND bobjvers = 'A'.
APPEND LINES OF i_trans_lookup_finder TO i_lookup_finder.
Edited by: Sakthi Jaganathan on May 20, 2009 6:25 PM

File:Place Function Bug in Snow Leopard (CS4)

Hi all. Have any of you experienced this bug when running Mac OS 10.6.7 (Snow Leopard)...the File:Place function no longer works for text. I can place graphics/photos, but when I try to place text nothing happens. Any thoughts about this? I'm using InDesign CS4.
Thanks!

I'm a Windows guy, so I'm shooting in the dark at this point. Happens in all files? How about in a new user account?
What has changed recently ont he system? New fonts? Any software updates?
Do you run a font manager?

Is there place in Aperture where a photo can be given a different look, like a painted canvas, cartoon look, or other effects?

Is there place in Aperture where a photo can be given a different look, like a painted canvas, cartoon look, or other effects?

Only by sending the photo to an external editor or using a plug-in, like Toonit (see ToonIt! For Aperture (Digital Anarchy)).
The effects in Aperture (see the are very basic. Some simple effects Quartz Filter effects can be added by using Automator services, see my user tip here:
Using Quartz Filters with Aperture
For example, using the ColorPencil effect:

My iPhone 4s no longer has sound for any of the applications but it does have sound for phone functions. Where is the setting for app sound? I have gone to the multitask screen and the volume bar is empty.

I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.

Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy

Place... Function LR5 where is it ?

Similar Messages

Maybe you are looking for